PREFIX owl: PREFIX rdf: PREFIX rdfs: PREFIX xsd: PREFIX cim100: PREFIX linkml: PREFIX rdfschemaextensions19990926: PREFIX cim100european: PREFIX dcterms: PREFIX dcat: PREFIX skos: PREFIX pav: PREFIX sh: PREFIX vann: a owl:Ontology ; rdfs:label "Equipment Boundary Vocabulary"@en ; rdfs:comment "This vocabulary is describing the equipment boundary profile from IEC 61970-600-2."@en ; pav:createdOn "2021-01-27T12:30:44Z"^^xsd:dateTime ; pav:lastUpdatedOn "2020-10-12"^^xsd:dateTime ; pav:version "3.0.0" ; dcterms:conformsTo , , , ; dcterms:creator "ENTSO-E CIM EG" ; dcterms:identifier "1e79354a-ccc2-434b-bab3-3dc4a08df5ea" ; dcterms:language "en-GB" ; dcterms:publisher "ENTSO-E" ; dcterms:rights "Copyright" ; dcterms:rightsHolder "ENTSO-E" ; owl:incompatibleWith ; owl:priorVersion ; dcat:keyword "EQBD" ; dcat:landingPage ; dcat:theme "vocabulary" ; vann:preferredNamespacePrefix "cim100" ; vann:preferredNamespaceUri "http://iec.ch/TC57/CIM100#"^^xsd:anyURI ; sh:declare [ sh:prefix "cim100" ; sh:namespace "http://iec.ch/TC57/CIM100#"^^xsd:anyURI ] , [ sh:prefix "linkml" ; sh:namespace "https://w3id.org/linkml/"^^xsd:anyURI ] , [ sh:prefix "rdfschemaextensions19990926" ; sh:namespace "http://iec.ch/TC57/1999/rdf-schema-extensions-19990926#"^^xsd:anyURI ] , [ sh:prefix "cim100european" ; sh:namespace "http://iec.ch/TC57/CIM100-European#"^^xsd:anyURI ] , [ sh:prefix "dcterms" ; sh:namespace "http://purl.org/dc/terms/"^^xsd:anyURI ] , [ sh:prefix "owl" ; sh:namespace "http://www.w3.org/2002/07/owl#"^^xsd:anyURI ] , [ sh:prefix "dcat" ; sh:namespace "http://www.w3.org/ns/dcat#"^^xsd:anyURI ] . cim100:Float a owl:Class ; rdfs:label "Float"@en ; rdfs:comment "A floating point number. The range is unspecified and not limited." ; rdfschemaextensions19990926:belongsToCategory ; rdfschemaextensions19990926:stereotype "Primitive" . cim100:ACDCTerminal a owl:Class ; rdfs:label "ACDCTerminal"@en ; rdfs:comment "An electrical connection point (AC or DC) to a piece of conducting equipment. Terminals are connected at physical connection points called connectivity nodes." ; rdfschemaextensions19990926:belongsToCategory ; rdfs:subClassOf cim100:IdentifiedObject . cim100:ConnectivityNodeContainer a owl:Class ; rdfs:label "ConnectivityNodeContainer"@en ; rdfs:comment "A base class for all objects that may contain connectivity nodes or topological nodes." ; rdfschemaextensions19990926:belongsToCategory ; rdfs:subClassOf cim100:PowerSystemResource , [ a owl:Restriction ; owl:onProperty cim100:ConnectivityNodeContainer.ConnectivityNodes ; owl:allValuesFrom cim100:ConnectivityNode ] . cim100:Terminal a owl:Class ; rdfs:label "Terminal"@en ; rdfs:comment "An AC electrical connection point to a piece of conducting equipment. Terminals are connected at physical connection points called connectivity nodes." ; rdfschemaextensions19990926:belongsToCategory ; rdfschemaextensions19990926:stereotype ; rdfs:subClassOf cim100:ACDCTerminal , [ a owl:Restriction ; owl:onProperty cim100:Terminal.ConductingEquipment ; owl:allValuesFrom cim100:ConductingEquipment ] , [ a owl:Restriction ; owl:onProperty cim100:Terminal.ConnectivityNode ; owl:allValuesFrom cim100:ConnectivityNode ] . cim100:Substation a owl:Class ; rdfs:label "Substation"@en ; rdfs:comment "A collection of equipment for purposes other than generation or utilization, through which electric energy in bulk is passed for the purposes of switching or modifying its characteristics. " ; rdfschemaextensions19990926:belongsToCategory ; rdfschemaextensions19990926:stereotype ; rdfs:subClassOf cim100:EquipmentContainer , [ a owl:Restriction ; owl:onProperty cim100:Substation.Region ; owl:allValuesFrom cim100:SubGeographicalRegion ] , [ a owl:Restriction ; owl:onProperty cim100:Substation.VoltageLevels ; owl:allValuesFrom cim100:VoltageLevel ] . cim100:String a owl:Class ; rdfs:label "String"@en ; rdfs:comment "A string consisting of a sequence of characters. The character encoding is UTF-8. The string length is unspecified and unlimited." ; rdfschemaextensions19990926:belongsToCategory ; rdfschemaextensions19990926:stereotype "Primitive" . cim100:Bay a owl:Class ; rdfs:label "Bay"@en ; rdfs:comment "A collection of power system resources (within a given substation) including conducting equipment, protection relays, measurements, and telemetry. A bay typically represents a physical grouping related to modularization of equipment." ; rdfschemaextensions19990926:belongsToCategory ; rdfschemaextensions19990926:stereotype ; rdfs:subClassOf cim100:EquipmentContainer , [ a owl:Restriction ; owl:onProperty cim100:Bay.VoltageLevel ; owl:allValuesFrom cim100:VoltageLevel ] . cim100:Junction a owl:Class ; rdfs:label "Junction"@en ; rdfs:comment "A point where one or more conducting equipments are connected with zero resistance." ; rdfschemaextensions19990926:belongsToCategory ; rdfschemaextensions19990926:stereotype ; rdfs:subClassOf cim100:Connector . cim100:VoltageLevel a owl:Class ; rdfs:label "VoltageLevel"@en ; rdfs:comment "A collection of equipment at one common system voltage forming a switchgear. The equipment typically consists of breakers, busbars, instrumentation, control, regulation and protection devices as well as assemblies of all these." ; rdfschemaextensions19990926:belongsToCategory ; rdfschemaextensions19990926:stereotype ; rdfs:subClassOf cim100:EquipmentContainer , [ a owl:Restriction ; owl:onProperty cim100:VoltageLevel.lowVoltageLimit ; owl:allValuesFrom owl:Thing ] , [ a owl:Restriction ; owl:onProperty cim100:VoltageLevel.BaseVoltage ; owl:allValuesFrom cim100:BaseVoltage ] , [ a owl:Restriction ; owl:onProperty cim100:VoltageLevel.Substation ; owl:allValuesFrom cim100:Substation ] , [ a owl:Restriction ; owl:onProperty cim100:VoltageLevel.highVoltageLimit ; owl:allValuesFrom owl:Thing ] , [ a owl:Restriction ; owl:onProperty cim100:VoltageLevel.Bays ; owl:allValuesFrom cim100:Bay ] . cim100:Connector a owl:Class ; rdfs:label "Connector"@en ; rdfs:comment "A conductor, or group of conductors, with negligible impedance, that serve to connect other conducting equipment within a single substation and are modelled with a single logical terminal." ; rdfschemaextensions19990926:belongsToCategory ; rdfs:subClassOf cim100:ConductingEquipment . cim100:BaseVoltage a owl:Class ; rdfs:label "BaseVoltage"@en ; rdfs:comment "Defines a system base voltage which is referenced. " ; rdfschemaextensions19990926:belongsToCategory ; rdfschemaextensions19990926:stereotype ; rdfs:subClassOf cim100:IdentifiedObject , [ a owl:Restriction ; owl:onProperty cim100:BaseVoltage.nominalVoltage ; owl:allValuesFrom owl:Thing ] , [ a owl:Restriction ; owl:onProperty cim100:BaseVoltage.VoltageLevel ; owl:allValuesFrom cim100:VoltageLevel ] . cim100:PowerSystemResource a owl:Class ; rdfs:label "PowerSystemResource"@en ; rdfs:comment "A power system resource (PSR) can be an item of equipment such as a switch, an equipment container containing many individual items of equipment such as a substation, or an organisational entity such as sub-control area. Power system resources can have measurements associated." ; rdfschemaextensions19990926:belongsToCategory ; rdfs:subClassOf cim100:IdentifiedObject . cim100european:BoundaryPoint a owl:Class ; rdfs:label "BoundaryPoint"@en ; rdfs:comment "Designates a connection point at which one or more model authority sets shall connect to. The location of the connection point as well as other properties are agreed between organisations responsible for the interconnection, hence all attributes of the class represent this agreement. It is primarily used in a boundary model authority set which can contain one or many BoundaryPoint-s among other Equipment-s and their connections." ; rdfschemaextensions19990926:belongsToCategory ; rdfschemaextensions19990926:stereotype "European" , ; rdfs:subClassOf cim100:PowerSystemResource , [ a owl:Restriction ; owl:onProperty cim100european:BoundaryPoint.isDirectCurrent ; owl:allValuesFrom owl:Thing ] , [ a owl:Restriction ; owl:onProperty cim100european:BoundaryPoint.fromEndNameTso ; owl:allValuesFrom owl:Thing ] , [ a owl:Restriction ; owl:onProperty cim100european:BoundaryPoint.fromEndIsoCode ; owl:allValuesFrom owl:Thing ] , [ a owl:Restriction ; owl:onProperty cim100european:BoundaryPoint.isExcludedFromAreaInterchange ; owl:allValuesFrom owl:Thing ] , [ a owl:Restriction ; owl:onProperty cim100european:BoundaryPoint.fromEndName ; owl:allValuesFrom owl:Thing ] , [ a owl:Restriction ; owl:onProperty cim100european:BoundaryPoint.toEndNameTso ; owl:allValuesFrom owl:Thing ] , [ a owl:Restriction ; owl:onProperty cim100european:BoundaryPoint.ConnectivityNode ; owl:allValuesFrom cim100:ConnectivityNode ] , [ a owl:Restriction ; owl:onProperty cim100european:BoundaryPoint.toEndIsoCode ; owl:allValuesFrom owl:Thing ] , [ a owl:Restriction ; owl:onProperty cim100european:BoundaryPoint.toEndName ; owl:allValuesFrom owl:Thing ] . cim100:ConductingEquipment a owl:Class ; rdfs:label "ConductingEquipment"@en ; rdfs:comment "The parts of the AC power system that are designed to carry current or that are conductively connected through terminals." ; rdfschemaextensions19990926:belongsToCategory ; rdfs:subClassOf cim100:Equipment , [ a owl:Restriction ; owl:onProperty cim100:ConductingEquipment.Terminals ; owl:allValuesFrom cim100:Terminal ] . cim100:EnergySchedulingType a owl:Class ; rdfs:label "EnergySchedulingType"@en ; rdfs:comment "Used to define the type of generation for scheduling purposes." ; rdfschemaextensions19990926:belongsToCategory ; rdfschemaextensions19990926:stereotype ; rdfs:subClassOf cim100:IdentifiedObject . cim100:Date a owl:Class ; rdfs:label "Date"@en ; rdfs:comment "Date as \"yyyy-mm-dd\", which conforms with ISO 8601. UTC time zone is specified as \"yyyy-mm-ddZ\". A local timezone relative UTC is specified as \"yyyy-mm-dd(+/-)hh:mm\"." ; rdfschemaextensions19990926:belongsToCategory ; rdfschemaextensions19990926:stereotype "Primitive" . cim100:Line a owl:Class ; rdfs:label "Line"@en ; rdfs:comment "Contains equipment beyond a substation belonging to a power transmission line. " ; rdfschemaextensions19990926:belongsToCategory ; rdfschemaextensions19990926:stereotype ; rdfs:subClassOf cim100:EquipmentContainer , [ a owl:Restriction ; owl:onProperty cim100:Line.Region ; owl:allValuesFrom cim100:SubGeographicalRegion ] . cim100:SubGeographicalRegion a owl:Class ; rdfs:label "SubGeographicalRegion"@en ; rdfs:comment "A subset of a geographical region of a power system network model." ; rdfschemaextensions19990926:belongsToCategory ; rdfschemaextensions19990926:stereotype ; rdfs:subClassOf cim100:IdentifiedObject , [ a owl:Restriction ; owl:onProperty cim100:SubGeographicalRegion.Region ; owl:allValuesFrom cim100:GeographicalRegion ] , [ a owl:Restriction ; owl:onProperty cim100:SubGeographicalRegion.Lines ; owl:allValuesFrom cim100:Line ] , [ a owl:Restriction ; owl:onProperty cim100:SubGeographicalRegion.Substations ; owl:allValuesFrom cim100:Substation ] . cim100:Equipment a owl:Class ; rdfs:label "Equipment"@en ; rdfs:comment "The parts of a power system that are physical devices, electronic or mechanical." ; rdfschemaextensions19990926:belongsToCategory ; rdfs:subClassOf cim100:PowerSystemResource , [ a owl:Restriction ; owl:onProperty cim100:Equipment.EquipmentContainer ; owl:allValuesFrom cim100:EquipmentContainer ] . cim100:Boolean a owl:Class ; rdfs:label "Boolean"@en ; rdfs:comment "A type with the value space \"true\" and \"false\"." ; rdfschemaextensions19990926:belongsToCategory ; rdfschemaextensions19990926:stereotype "Primitive" . cim100:GeographicalRegion a owl:Class ; rdfs:label "GeographicalRegion"@en ; rdfs:comment "A geographical region of a power system network model." ; rdfschemaextensions19990926:belongsToCategory ; rdfschemaextensions19990926:stereotype ; rdfs:subClassOf cim100:IdentifiedObject , [ a owl:Restriction ; owl:onProperty cim100:GeographicalRegion.Regions ; owl:allValuesFrom cim100:SubGeographicalRegion ] . cim100:IdentifiedObject a owl:Class ; rdfs:label "IdentifiedObject"@en ; rdfs:comment "This is a root class to provide common identification for all classes needing identification and naming attributes." ; rdfschemaextensions19990926:belongsToCategory ; rdfs:subClassOf [ a owl:Restriction ; owl:onProperty cim100:IdentifiedObject.description ; owl:allValuesFrom owl:Thing ] , [ a owl:Restriction ; owl:onProperty cim100european:IdentifiedObject.shortName ; owl:allValuesFrom owl:Thing ] , [ a owl:Restriction ; owl:onProperty cim100:IdentifiedObject.mRID ; owl:allValuesFrom owl:Thing ] , [ a owl:Restriction ; owl:onProperty cim100:IdentifiedObject.name ; owl:allValuesFrom owl:Thing ] , [ a owl:Restriction ; owl:onProperty cim100european:IdentifiedObject.energyIdentCodeEic ; owl:allValuesFrom owl:Thing ] . cim100:EquipmentContainer a owl:Class ; rdfs:label "EquipmentContainer"@en ; rdfs:comment "A modelling construct to provide a root class for containing equipment. " ; rdfschemaextensions19990926:belongsToCategory ; rdfs:subClassOf cim100:ConnectivityNodeContainer , [ a owl:Restriction ; owl:onProperty cim100:EquipmentContainer.Equipments ; owl:allValuesFrom cim100:Equipment ] . cim100:Voltage a owl:Class ; rdfs:label "Voltage"@en ; rdfs:comment "Electrical voltage, can be both AC and DC." ; rdfschemaextensions19990926:belongsToCategory ; rdfschemaextensions19990926:stereotype "CIMDatatype" ; rdfs:subClassOf [ a owl:Restriction ; owl:onProperty cim100:Voltage.unit ; owl:allValuesFrom cim100:UnitSymbol ] , [ a owl:Restriction ; owl:onProperty cim100:Voltage.multiplier ; owl:allValuesFrom cim100:UnitMultiplier ] , [ a owl:Restriction ; owl:onProperty cim100:Voltage.value ; owl:allValuesFrom owl:Thing ] . cim100:ConnectivityNode a owl:Class ; rdfs:label "ConnectivityNode"@en ; rdfs:comment "Connectivity nodes are points where terminals of AC conducting equipment are connected together with zero impedance." ; rdfschemaextensions19990926:belongsToCategory ; rdfschemaextensions19990926:stereotype ; rdfs:subClassOf cim100:IdentifiedObject , [ a owl:Restriction ; owl:onProperty cim100:ConnectivityNode.Terminals ; owl:allValuesFrom cim100:Terminal ] , [ a owl:Restriction ; owl:onProperty cim100:ConnectivityNode.ConnectivityNodeContainer ; owl:allValuesFrom cim100:ConnectivityNodeContainer ] , [ a owl:Restriction ; owl:onProperty cim100european:ConnectivityNode.BoundaryPoint ; owl:allValuesFrom cim100european:BoundaryPoint ] . rdfschemaextensions19990926:ClassCategory a owl:Class . cim100:ConnectivityNode.Terminals a owl:ObjectProperty ; rdfs:label "Terminals"@en ; rdfs:comment "Terminals interconnected with zero impedance at a this connectivity node. " ; rdfschemaextensions19990926:AssociationUsed "No" ; rdfschemaextensions19990926:inverseRoleName cim100:Terminal.ConnectivityNode ; rdfschemaextensions19990926:multiplicity rdfschemaextensions19990926:M:0..n ; rdfs:range cim100:Terminal ; rdfs:domain cim100:ConnectivityNode . cim100:VoltageLevel.lowVoltageLimit a owl:ObjectProperty ; rdfs:label "lowVoltageLimit"@en ; rdfs:comment """The bus bar's low voltage limit. The limit applies to all equipment and nodes contained in a given VoltageLevel. It is not required that it is exchanged in pair with highVoltageLimit. It is preferable to use operational VoltageLimit, which prevails, if present.""" ; rdfschemaextensions19990926:dataType cim100:Voltage ; rdfschemaextensions19990926:multiplicity rdfschemaextensions19990926:M:0..1 ; rdfschemaextensions19990926:stereotype ; rdfs:domain cim100:VoltageLevel . cim100:Terminal.ConductingEquipment a owl:ObjectProperty ; rdfs:label "ConductingEquipment"@en ; rdfs:comment "The conducting equipment of the terminal. Conducting equipment have terminals that may be connected to other conducting equipment terminals via connectivity nodes or topological nodes." ; rdfschemaextensions19990926:AssociationUsed "Yes" ; rdfschemaextensions19990926:inverseRoleName cim100:ConductingEquipment.Terminals ; rdfschemaextensions19990926:multiplicity rdfschemaextensions19990926:M:1 ; rdfs:range cim100:ConductingEquipment ; rdfs:domain cim100:Terminal . cim100:ConnectivityNode.ConnectivityNodeContainer a owl:ObjectProperty ; rdfs:label "ConnectivityNodeContainer"@en ; rdfs:comment "Container of this connectivity node." ; rdfschemaextensions19990926:AssociationUsed "Yes" ; rdfschemaextensions19990926:inverseRoleName cim100:ConnectivityNodeContainer.ConnectivityNodes ; rdfschemaextensions19990926:multiplicity rdfschemaextensions19990926:M:1 ; rdfs:range cim100:ConnectivityNodeContainer ; rdfs:domain cim100:ConnectivityNode . cim100european:BoundaryPoint.isDirectCurrent a owl:ObjectProperty ; rdfs:label "isDirectCurrent"@en ; rdfs:comment "If true, this boundary point is a point of common coupling (PCC) of a direct current (DC) interconnection, otherwise the interconnection is AC (default)." ; rdfschemaextensions19990926:dataType cim100:Boolean ; rdfschemaextensions19990926:multiplicity rdfschemaextensions19990926:M:0..1 ; rdfschemaextensions19990926:stereotype "European" , ; rdfs:domain cim100european:BoundaryPoint . cim100:ConductingEquipment.Terminals a owl:ObjectProperty ; rdfs:label "Terminals"@en ; rdfs:comment "Conducting equipment have terminals that may be connected to other conducting equipment terminals via connectivity nodes or topological nodes." ; rdfschemaextensions19990926:AssociationUsed "No" ; rdfschemaextensions19990926:inverseRoleName cim100:Terminal.ConductingEquipment ; rdfschemaextensions19990926:multiplicity rdfschemaextensions19990926:M:0..n ; rdfs:range cim100:Terminal ; rdfs:domain cim100:ConductingEquipment . cim100:IdentifiedObject.description a owl:ObjectProperty ; rdfs:label "description"@en ; rdfs:comment "The description is a free human readable text describing or naming the object. It may be non unique and may not correlate to a naming hierarchy." ; rdfschemaextensions19990926:dataType cim100:String ; rdfschemaextensions19990926:multiplicity rdfschemaextensions19990926:M:0..1 ; rdfschemaextensions19990926:stereotype ; rdfs:domain cim100:IdentifiedObject . cim100:Equipment.EquipmentContainer a owl:ObjectProperty ; rdfs:label "EquipmentContainer"@en ; rdfs:comment "Container of this equipment." ; rdfschemaextensions19990926:AssociationUsed "Yes" ; rdfschemaextensions19990926:inverseRoleName cim100:EquipmentContainer.Equipments ; rdfschemaextensions19990926:multiplicity rdfschemaextensions19990926:M:0..1 ; rdfs:range cim100:EquipmentContainer ; rdfs:domain cim100:Equipment . cim100european:BoundaryPoint.fromEndNameTso a owl:ObjectProperty ; rdfs:label "fromEndNameTso"@en ; rdfs:comment "Identifies the name of the transmission system operator, distribution system operator or other entity at which the \"From\" side of the interconnection is connected to. The length of the string is 64 characters maximum." ; rdfschemaextensions19990926:dataType cim100:String ; rdfschemaextensions19990926:multiplicity rdfschemaextensions19990926:M:1..1 ; rdfschemaextensions19990926:stereotype "European" , ; rdfs:domain cim100european:BoundaryPoint . cim100european:IdentifiedObject.shortName a owl:ObjectProperty ; rdfs:label "shortName"@en ; rdfs:comment "The attribute is used for an exchange of a human readable short name with length of the string 12 characters maximum." ; rdfschemaextensions19990926:dataType cim100:String ; rdfschemaextensions19990926:multiplicity rdfschemaextensions19990926:M:0..1 ; rdfschemaextensions19990926:stereotype "European" , , "deprecated" ; rdfs:domain cim100:IdentifiedObject . cim100:Terminal.ConnectivityNode a owl:ObjectProperty ; rdfs:label "ConnectivityNode"@en ; rdfs:comment "The connectivity node to which this terminal connects with zero impedance." ; rdfschemaextensions19990926:AssociationUsed "Yes" ; rdfschemaextensions19990926:inverseRoleName cim100:ConnectivityNode.Terminals ; rdfschemaextensions19990926:multiplicity rdfschemaextensions19990926:M:0..1 ; rdfs:range cim100:ConnectivityNode ; rdfs:domain cim100:Terminal . cim100european:BoundaryPoint.fromEndIsoCode a owl:ObjectProperty ; rdfs:label "fromEndIsoCode"@en ; rdfs:comment """The ISO code of the region which the \"From\" side of the Boundary point belongs to or it is connected to. The ISO code is a two-character country code as defined by ISO 3166 (http://www.iso.org/iso/country_codes). The length of the string is 2 characters maximum.""" ; rdfschemaextensions19990926:dataType cim100:String ; rdfschemaextensions19990926:multiplicity rdfschemaextensions19990926:M:1..1 ; rdfschemaextensions19990926:stereotype "European" , ; rdfs:domain cim100european:BoundaryPoint . cim100:Voltage.unit a owl:ObjectProperty ; rdfs:label "unit"@en ; rdfschemaextensions19990926:isFixed "V" ; rdfschemaextensions19990926:multiplicity rdfschemaextensions19990926:M:0..1 ; rdfschemaextensions19990926:stereotype ; rdfs:range cim100:UnitSymbol ; rdfs:domain cim100:Voltage . cim100:Voltage.multiplier a owl:ObjectProperty ; rdfs:label "multiplier"@en ; rdfschemaextensions19990926:isFixed "k" ; rdfschemaextensions19990926:multiplicity rdfschemaextensions19990926:M:0..1 ; rdfschemaextensions19990926:stereotype ; rdfs:range cim100:UnitMultiplier ; rdfs:domain cim100:Voltage . cim100:Bay.VoltageLevel a owl:ObjectProperty ; rdfs:label "VoltageLevel"@en ; rdfs:comment "The voltage level containing this bay." ; rdfschemaextensions19990926:AssociationUsed "Yes" ; rdfschemaextensions19990926:inverseRoleName cim100:VoltageLevel.Bays ; rdfschemaextensions19990926:multiplicity rdfschemaextensions19990926:M:1 ; rdfs:range cim100:VoltageLevel ; rdfs:domain cim100:Bay . cim100:SubGeographicalRegion.Region a owl:ObjectProperty ; rdfs:label "Region"@en ; rdfs:comment "The geographical region which this sub-geographical region is within." ; rdfschemaextensions19990926:AssociationUsed "Yes" ; rdfschemaextensions19990926:inverseRoleName cim100:GeographicalRegion.Regions ; rdfschemaextensions19990926:multiplicity rdfschemaextensions19990926:M:1..1 ; rdfs:range cim100:GeographicalRegion ; rdfs:domain cim100:SubGeographicalRegion . cim100:SubGeographicalRegion.Lines a owl:ObjectProperty ; rdfs:label "Lines"@en ; rdfs:comment "The lines within the sub-geographical region." ; rdfschemaextensions19990926:AssociationUsed "No" ; rdfschemaextensions19990926:inverseRoleName cim100:Line.Region ; rdfschemaextensions19990926:multiplicity rdfschemaextensions19990926:M:0..n ; rdfschemaextensions19990926:stereotype ; rdfs:range cim100:Line ; rdfs:domain cim100:SubGeographicalRegion . cim100:Line.Region a owl:ObjectProperty ; rdfs:label "Region"@en ; rdfs:comment "The sub-geographical region of the line." ; rdfschemaextensions19990926:AssociationUsed "Yes" ; rdfschemaextensions19990926:inverseRoleName cim100:SubGeographicalRegion.Lines ; rdfschemaextensions19990926:multiplicity rdfschemaextensions19990926:M:0..1 ; rdfs:range cim100:SubGeographicalRegion ; rdfs:domain cim100:Line . cim100:SubGeographicalRegion.Substations a owl:ObjectProperty ; rdfs:label "Substations"@en ; rdfs:comment "The substations in this sub-geographical region." ; rdfschemaextensions19990926:AssociationUsed "No" ; rdfschemaextensions19990926:inverseRoleName cim100:Substation.Region ; rdfschemaextensions19990926:multiplicity rdfschemaextensions19990926:M:0..n ; rdfs:range cim100:Substation ; rdfs:domain cim100:SubGeographicalRegion . cim100:IdentifiedObject.mRID a owl:ObjectProperty ; rdfs:label "mRID"@en ; rdfs:comment """Master resource identifier issued by a model authority. The mRID is unique within an exchange context. Global uniqueness is easily achieved by using a UUID, as specified in RFC 4122, for the mRID. The use of UUID is strongly recommended. For CIMXML data files in RDF syntax conforming to IEC 61970-552, the mRID is mapped to rdf:ID or rdf:about attributes that identify CIM object elements.""" ; rdfschemaextensions19990926:dataType cim100:String ; rdfschemaextensions19990926:multiplicity rdfschemaextensions19990926:M:1..1 ; rdfschemaextensions19990926:stereotype ; rdfs:domain cim100:IdentifiedObject . cim100:IdentifiedObject.name a owl:ObjectProperty ; rdfs:label "name"@en ; rdfs:comment "The name is any free human readable and possibly non unique text naming the object." ; rdfschemaextensions19990926:dataType cim100:String ; rdfschemaextensions19990926:multiplicity rdfschemaextensions19990926:M:1..1 ; rdfschemaextensions19990926:stereotype ; rdfs:domain cim100:IdentifiedObject . cim100:EquipmentContainer.Equipments a owl:ObjectProperty ; rdfs:label "Equipments"@en ; rdfs:comment "Contained equipment." ; rdfschemaextensions19990926:AssociationUsed "No" ; rdfschemaextensions19990926:inverseRoleName cim100:Equipment.EquipmentContainer ; rdfschemaextensions19990926:multiplicity rdfschemaextensions19990926:M:0..n ; rdfs:range cim100:Equipment ; rdfs:domain cim100:EquipmentContainer . cim100european:BoundaryPoint.isExcludedFromAreaInterchange a owl:ObjectProperty ; rdfs:label "isExcludedFromAreaInterchange"@en ; rdfs:comment "If true, this boundary point is on the interconnection that is excluded from control area interchange calculation and consequently has no related tie flows. Otherwise, the interconnection is included in control area interchange and a TieFlow is required at all sides of the boundary point (default)." ; rdfschemaextensions19990926:dataType cim100:Boolean ; rdfschemaextensions19990926:multiplicity rdfschemaextensions19990926:M:0..1 ; rdfschemaextensions19990926:stereotype "European" , ; rdfs:domain cim100european:BoundaryPoint . cim100:ConnectivityNodeContainer.ConnectivityNodes a owl:ObjectProperty ; rdfs:label "ConnectivityNodes"@en ; rdfs:comment "Connectivity nodes which belong to this connectivity node container." ; rdfschemaextensions19990926:AssociationUsed "No" ; rdfschemaextensions19990926:inverseRoleName cim100:ConnectivityNode.ConnectivityNodeContainer ; rdfschemaextensions19990926:multiplicity rdfschemaextensions19990926:M:0..n ; rdfs:range cim100:ConnectivityNode ; rdfs:domain cim100:ConnectivityNodeContainer . cim100:Voltage.value a owl:ObjectProperty ; rdfs:label "value"@en ; rdfschemaextensions19990926:dataType cim100:Float ; rdfschemaextensions19990926:multiplicity rdfschemaextensions19990926:M:0..1 ; rdfschemaextensions19990926:stereotype ; rdfs:domain cim100:Voltage . cim100:VoltageLevel.BaseVoltage a owl:ObjectProperty ; rdfs:label "BaseVoltage"@en ; rdfs:comment "The base voltage used for all equipment within the voltage level." ; rdfschemaextensions19990926:AssociationUsed "Yes" ; rdfschemaextensions19990926:inverseRoleName cim100:BaseVoltage.VoltageLevel ; rdfschemaextensions19990926:multiplicity rdfschemaextensions19990926:M:1 ; rdfs:range cim100:BaseVoltage ; rdfs:domain cim100:VoltageLevel . cim100:BaseVoltage.nominalVoltage a owl:ObjectProperty ; rdfs:label "nominalVoltage"@en ; rdfs:comment "The power system resource's base voltage. Shall be a positive value and not zero." ; rdfschemaextensions19990926:dataType cim100:Voltage ; rdfschemaextensions19990926:multiplicity rdfschemaextensions19990926:M:1..1 ; rdfschemaextensions19990926:stereotype ; rdfs:domain cim100:BaseVoltage . cim100european:BoundaryPoint.fromEndName a owl:ObjectProperty ; rdfs:label "fromEndName"@en ; rdfs:comment """A human readable name with length of the string 64 characters maximum. It covers the following two cases: -if the Boundary point is placed on a tie-line, it is the name (IdentifiedObject.name) of the substation at which the \"From\" side of the tie-line is connected to. -if the Boundary point is placed in a substation, it is the name (IdentifiedObject.name) of the element (e.g. PowerTransformer, ACLineSegment, Switch, etc.) at which the \"From\" side of the Boundary point is connected to.""" ; rdfschemaextensions19990926:dataType cim100:String ; rdfschemaextensions19990926:multiplicity rdfschemaextensions19990926:M:1..1 ; rdfschemaextensions19990926:stereotype "European" , ; rdfs:domain cim100european:BoundaryPoint . cim100:VoltageLevel.Substation a owl:ObjectProperty ; rdfs:label "Substation"@en ; rdfs:comment "The substation of the voltage level." ; rdfschemaextensions19990926:AssociationUsed "Yes" ; rdfschemaextensions19990926:inverseRoleName cim100:Substation.VoltageLevels ; rdfschemaextensions19990926:multiplicity rdfschemaextensions19990926:M:1 ; rdfs:range cim100:Substation ; rdfs:domain cim100:VoltageLevel . cim100european:BoundaryPoint.toEndNameTso a owl:ObjectProperty ; rdfs:label "toEndNameTso"@en ; rdfs:comment "Identifies the name of the transmission system operator, distribution system operator or other entity at which the \"To\" side of the interconnection is connected to. The length of the string is 64 characters maximum." ; rdfschemaextensions19990926:dataType cim100:String ; rdfschemaextensions19990926:multiplicity rdfschemaextensions19990926:M:1..1 ; rdfschemaextensions19990926:stereotype "European" , ; rdfs:domain cim100european:BoundaryPoint . cim100:GeographicalRegion.Regions a owl:ObjectProperty ; rdfs:label "Regions"@en ; rdfs:comment "All sub-geographical regions within this geographical region." ; rdfschemaextensions19990926:AssociationUsed "No" ; rdfschemaextensions19990926:inverseRoleName cim100:SubGeographicalRegion.Region ; rdfschemaextensions19990926:multiplicity rdfschemaextensions19990926:M:0..n ; rdfs:range cim100:SubGeographicalRegion ; rdfs:domain cim100:GeographicalRegion . cim100european:BoundaryPoint.ConnectivityNode a owl:ObjectProperty ; rdfs:label "ConnectivityNode"@en ; rdfs:comment "The connectivity node that is designated as a boundary point." ; rdfschemaextensions19990926:AssociationUsed "Yes" ; rdfschemaextensions19990926:inverseRoleName cim100european:ConnectivityNode.BoundaryPoint ; rdfschemaextensions19990926:multiplicity rdfschemaextensions19990926:M:1 ; rdfschemaextensions19990926:stereotype "European" ; rdfs:range cim100:ConnectivityNode ; rdfs:domain cim100european:BoundaryPoint . cim100european:IdentifiedObject.energyIdentCodeEic a owl:ObjectProperty ; rdfs:label "energyIdentCodeEic"@en ; rdfs:comment "The attribute is used for an exchange of the EIC code (Energy identification Code). The length of the string is 16 characters as defined by the EIC code. For details on EIC scheme please refer to ENTSO-E web site." ; rdfschemaextensions19990926:dataType cim100:String ; rdfschemaextensions19990926:multiplicity rdfschemaextensions19990926:M:0..1 ; rdfschemaextensions19990926:stereotype "European" , , "deprecated" ; rdfs:domain cim100:IdentifiedObject . cim100european:BoundaryPoint.toEndIsoCode a owl:ObjectProperty ; rdfs:label "toEndIsoCode"@en ; rdfs:comment """The ISO code of the region which the \"To\" side of the Boundary point belongs to or is connected to. The ISO code is a two-character country code as defined by ISO 3166 (http://www.iso.org/iso/country_codes). The length of the string is 2 characters maximum.""" ; rdfschemaextensions19990926:dataType cim100:String ; rdfschemaextensions19990926:multiplicity rdfschemaextensions19990926:M:1..1 ; rdfschemaextensions19990926:stereotype "European" , ; rdfs:domain cim100european:BoundaryPoint . cim100:VoltageLevel.highVoltageLimit a owl:ObjectProperty ; rdfs:label "highVoltageLimit"@en ; rdfs:comment """The bus bar's high voltage limit. The limit applies to all equipment and nodes contained in a given VoltageLevel. It is not required that it is exchanged in pair with lowVoltageLimit. It is preferable to use operational VoltageLimit, which prevails, if present.""" ; rdfschemaextensions19990926:dataType cim100:Voltage ; rdfschemaextensions19990926:multiplicity rdfschemaextensions19990926:M:0..1 ; rdfschemaextensions19990926:stereotype ; rdfs:domain cim100:VoltageLevel . cim100:Substation.Region a owl:ObjectProperty ; rdfs:label "Region"@en ; rdfs:comment "The SubGeographicalRegion containing the substation." ; rdfschemaextensions19990926:AssociationUsed "Yes" ; rdfschemaextensions19990926:inverseRoleName cim100:SubGeographicalRegion.Substations ; rdfschemaextensions19990926:multiplicity rdfschemaextensions19990926:M:1 ; rdfs:range cim100:SubGeographicalRegion ; rdfs:domain cim100:Substation . cim100:Substation.VoltageLevels a owl:ObjectProperty ; rdfs:label "VoltageLevels"@en ; rdfs:comment "The voltage levels within this substation." ; rdfschemaextensions19990926:AssociationUsed "No" ; rdfschemaextensions19990926:inverseRoleName cim100:VoltageLevel.Substation ; rdfschemaextensions19990926:multiplicity rdfschemaextensions19990926:M:0..n ; rdfs:range cim100:VoltageLevel ; rdfs:domain cim100:Substation . cim100european:ConnectivityNode.BoundaryPoint a owl:ObjectProperty ; rdfs:label "BoundaryPoint"@en ; rdfs:comment "The boundary point associated with the connectivity node." ; rdfschemaextensions19990926:AssociationUsed "No" ; rdfschemaextensions19990926:inverseRoleName cim100european:BoundaryPoint.ConnectivityNode ; rdfschemaextensions19990926:multiplicity rdfschemaextensions19990926:M:0..1 ; rdfschemaextensions19990926:stereotype "European" ; rdfs:range cim100european:BoundaryPoint ; rdfs:domain cim100:ConnectivityNode . cim100european:BoundaryPoint.toEndName a owl:ObjectProperty ; rdfs:label "toEndName"@en ; rdfs:comment """A human readable name with length of the string 64 characters maximum. It covers the following two cases: -if the Boundary point is placed on a tie-line, it is the name (IdentifiedObject.name) of the substation at which the \"To\" side of the tie-line is connected to. -if the Boundary point is placed in a substation, it is the name (IdentifiedObject.name) of the element (e.g. PowerTransformer, ACLineSegment, Switch, etc.) at which the \"To\" side of the Boundary point is connected to.""" ; rdfschemaextensions19990926:dataType cim100:String ; rdfschemaextensions19990926:multiplicity rdfschemaextensions19990926:M:1..1 ; rdfschemaextensions19990926:stereotype "European" , ; rdfs:domain cim100european:BoundaryPoint . cim100:VoltageLevel.Bays a owl:ObjectProperty ; rdfs:label "Bays"@en ; rdfs:comment "The bays within this voltage level." ; rdfschemaextensions19990926:AssociationUsed "No" ; rdfschemaextensions19990926:inverseRoleName cim100:Bay.VoltageLevel ; rdfschemaextensions19990926:multiplicity rdfschemaextensions19990926:M:0..n ; rdfs:range cim100:Bay ; rdfs:domain cim100:VoltageLevel . cim100:BaseVoltage.VoltageLevel a owl:ObjectProperty ; rdfs:label "VoltageLevel"@en ; rdfs:comment "The voltage levels having this base voltage." ; rdfschemaextensions19990926:AssociationUsed "No" ; rdfschemaextensions19990926:inverseRoleName cim100:VoltageLevel.BaseVoltage ; rdfschemaextensions19990926:multiplicity rdfschemaextensions19990926:M:0..n ; rdfs:range cim100:VoltageLevel ; rdfs:domain cim100:BaseVoltage . cim100:UnitMultiplier a owl:Class ; rdfs:label "UnitMultiplier"@en ; rdfs:comment """The unit multipliers defined for the CIM. When applied to unit symbols, the unit symbol is treated as a derived unit. Regardless of the contents of the unit symbol text, the unit symbol shall be treated as if it were a single-character unit symbol. Unit symbols should not contain multipliers, and it should be left to the multiplier to define the multiple for an entire data type. For example, if a unit symbol is \"m2Pers\" and the multiplier is \"k\", then the value is k(m**2/s), and the multiplier applies to the entire final value, not to any individual part of the value. This can be conceptualized by substituting a derived unit symbol for the unit type. If one imagines that the symbol \"Þ\" represents the derived unit \"m2Pers\", then applying the multiplier \"k\" can be conceptualized simply as \"kÞ\". For example, the SI unit for mass is \"kg\" and not \"g\". If the unit symbol is defined as \"kg\", then the multiplier is applied to \"kg\" as a whole and does not replace the \"k\" in front of the \"g\". In this case, the multiplier of \"m\" would be used with the unit symbol of \"kg\" to represent one gram. As a text string, this violates the instructions in IEC 80000-1. However, because the unit symbol in CIM is treated as a derived unit instead of as an SI unit, it makes more sense to conceptualize the \"kg\" as if it were replaced by one of the proposed replacements for the SI mass symbol. If one imagines that the \"kg\" were replaced by a symbol \"Þ\", then it is easier to conceptualize the multiplier \"m\" as creating the proper unit \"mÞ\", and not the forbidden unit \"mkg\".""" ; rdfschemaextensions19990926:belongsToCategory ; rdfschemaextensions19990926:stereotype ; owl:equivalentClass [ a owl:Class ; owl:oneOf ( cim100:UnitMultiplier.da cim100:UnitMultiplier.micro cim100:UnitMultiplier.E cim100:UnitMultiplier.G cim100:UnitMultiplier.M cim100:UnitMultiplier.P cim100:UnitMultiplier.T cim100:UnitMultiplier.Y cim100:UnitMultiplier.Z cim100:UnitMultiplier.a cim100:UnitMultiplier.c cim100:UnitMultiplier.d cim100:UnitMultiplier.f cim100:UnitMultiplier.h cim100:UnitMultiplier.k cim100:UnitMultiplier.m cim100:UnitMultiplier.n cim100:UnitMultiplier.p cim100:UnitMultiplier.y cim100:UnitMultiplier.z cim100:UnitMultiplier.none ) ] . cim100:UnitMultiplier.da a owl:NamedIndividual ; skos:notation "UnitMultiplier_da" ; rdfs:label "da"@en ; rdfs:comment "Deca 10**1." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitMultiplier . cim100:UnitMultiplier.micro a owl:NamedIndividual ; skos:notation "UnitMultiplier_micro" ; rdfs:label "micro"@en ; rdfs:comment "Micro 10**-6." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitMultiplier . cim100:UnitMultiplier.E a owl:NamedIndividual ; skos:notation "UnitMultiplier_E" ; rdfs:label "E"@en ; rdfs:comment "Exa 10**18." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitMultiplier . cim100:UnitMultiplier.G a owl:NamedIndividual ; skos:notation "UnitMultiplier_G" ; rdfs:label "G"@en ; rdfs:comment "Giga 10**9." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitMultiplier . cim100:UnitMultiplier.M a owl:NamedIndividual ; skos:notation "UnitMultiplier_M" ; rdfs:label "M"@en ; rdfs:comment "Mega 10**6." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitMultiplier . cim100:UnitMultiplier.P a owl:NamedIndividual ; skos:notation "UnitMultiplier_P" ; rdfs:label "P"@en ; rdfs:comment "Peta 10**15." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitMultiplier . cim100:UnitMultiplier.T a owl:NamedIndividual ; skos:notation "UnitMultiplier_T" ; rdfs:label "T"@en ; rdfs:comment "Tera 10**12." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitMultiplier . cim100:UnitMultiplier.Y a owl:NamedIndividual ; skos:notation "UnitMultiplier_Y" ; rdfs:label "Y"@en ; rdfs:comment "Yotta 10**24." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitMultiplier . cim100:UnitMultiplier.Z a owl:NamedIndividual ; skos:notation "UnitMultiplier_Z" ; rdfs:label "Z"@en ; rdfs:comment "Zetta 10**21." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitMultiplier . cim100:UnitMultiplier.a a owl:NamedIndividual ; skos:notation "UnitMultiplier_a" ; rdfs:label "a"@en ; rdfs:comment "Atto 10**-18." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitMultiplier . cim100:UnitMultiplier.c a owl:NamedIndividual ; skos:notation "UnitMultiplier_c" ; rdfs:label "c"@en ; rdfs:comment "Centi 10**-2." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitMultiplier . cim100:UnitMultiplier.d a owl:NamedIndividual ; skos:notation "UnitMultiplier_d" ; rdfs:label "d"@en ; rdfs:comment "Deci 10**-1." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitMultiplier . cim100:UnitMultiplier.f a owl:NamedIndividual ; skos:notation "UnitMultiplier_f" ; rdfs:label "f"@en ; rdfs:comment "Femto 10**-15." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitMultiplier . cim100:UnitMultiplier.h a owl:NamedIndividual ; skos:notation "UnitMultiplier_h" ; rdfs:label "h"@en ; rdfs:comment "Hecto 10**2." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitMultiplier . cim100:UnitMultiplier.k a owl:NamedIndividual ; skos:notation "UnitMultiplier_k" ; rdfs:label "k"@en ; rdfs:comment "Kilo 10**3." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitMultiplier . cim100:UnitMultiplier.m a owl:NamedIndividual ; skos:notation "UnitMultiplier_m" ; rdfs:label "m"@en ; rdfs:comment "Milli 10**-3." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitMultiplier . cim100:UnitMultiplier.n a owl:NamedIndividual ; skos:notation "UnitMultiplier_n" ; rdfs:label "n"@en ; rdfs:comment "Nano 10**-9." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitMultiplier . cim100:UnitMultiplier.p a owl:NamedIndividual ; skos:notation "UnitMultiplier_p" ; rdfs:label "p"@en ; rdfs:comment "Pico 10**-12." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitMultiplier . cim100:UnitMultiplier.y a owl:NamedIndividual ; skos:notation "UnitMultiplier_y" ; rdfs:label "y"@en ; rdfs:comment "Yocto 10**-24." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitMultiplier . cim100:UnitMultiplier.z a owl:NamedIndividual ; skos:notation "UnitMultiplier_z" ; rdfs:label "z"@en ; rdfs:comment "Zepto 10**-21." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitMultiplier . cim100:UnitMultiplier.none a owl:NamedIndividual ; skos:notation "UnitMultiplier_none" ; rdfs:label "none"@en ; rdfs:comment "No multiplier or equivalently multiply by 1." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitMultiplier . cim100:UnitSymbol a owl:Class ; rdfs:label "UnitSymbol"@en ; rdfs:comment """The derived units defined for usage in the CIM. In some cases, the derived unit is equal to an SI unit. Whenever possible, the standard derived symbol is used instead of the formula for the derived unit. For example, the unit symbol Farad is defined as \"F\" instead of \"CPerV\". In cases where a standard symbol does not exist for a derived unit, the formula for the unit is used as the unit symbol. For example, density does not have a standard symbol and so it is represented as \"kgPerm3\". With the exception of the \"kg\", which is an SI unit, the unit symbols do not contain multipliers and therefore represent the base derived unit to which a multiplier can be applied as a whole. Every unit symbol is treated as an unparseable text as if it were a single-letter symbol. The meaning of each unit symbol is defined by the accompanying descriptive text and not by the text contents of the unit symbol. To allow the widest possible range of serializations without requiring special character handling, several substitutions are made which deviate from the format described in IEC 80000-1. The division symbol \"/\" is replaced by the letters \"Per\". Exponents are written in plain text after the unit as \"m3\" instead of being formatted as \"m\" with a superscript of 3 or introducing a symbol as in \"m^3\". The degree symbol \"°\" is replaced with the letters \"deg\". Any clarification of the meaning for a substitution is included in the description for the unit symbol. Non-SI units are included in list of unit symbols to allow sources of data to be correctly labelled with their non-SI units (for example, a GPS sensor that is reporting numbers that represent feet instead of meters). This allows software to use the unit symbol information correctly convert and scale the raw data of those sources into SI-based units. The integer values are used for harmonization with IEC 61850.""" ; rdfschemaextensions19990926:belongsToCategory ; rdfschemaextensions19990926:stereotype ; owl:equivalentClass [ a owl:Class ; owl:oneOf ( cim100:UnitSymbol.A cim100:UnitSymbol.C cim100:UnitSymbol.F cim100:UnitSymbol.G cim100:UnitSymbol.H cim100:UnitSymbol.J cim100:UnitSymbol.K cim100:UnitSymbol.M cim100:UnitSymbol.N cim100:UnitSymbol.Q cim100:UnitSymbol.S cim100:UnitSymbol.T cim100:UnitSymbol.V cim100:UnitSymbol.W cim100:UnitSymbol.d cim100:UnitSymbol.h cim100:UnitSymbol.l cim100:UnitSymbol.m cim100:UnitSymbol.s cim100:UnitSymbol.HzPers cim100:UnitSymbol.JPerkg cim100:UnitSymbol.JPerm2 cim100:UnitSymbol.JPerm3 cim100:UnitSymbol.PaPers cim100:UnitSymbol.A2 cim100:UnitSymbol.Ah cim100:UnitSymbol.As cim100:UnitSymbol.Bq cim100:UnitSymbol.Gy cim100:UnitSymbol.Hz cim100:UnitSymbol.Mx cim100:UnitSymbol.Nm cim100:UnitSymbol.Oe cim100:UnitSymbol.Pa cim100:UnitSymbol.Qh cim100:UnitSymbol.Sv cim100:UnitSymbol.V2 cim100:UnitSymbol.VA cim100:UnitSymbol.Vh cim100:UnitSymbol.Vs cim100:UnitSymbol.Wb cim100:UnitSymbol.Wh cim100:UnitSymbol.dB cim100:UnitSymbol.cd cim100:UnitSymbol.ha cim100:UnitSymbol.kg cim100:UnitSymbol.kn cim100:UnitSymbol.m2 cim100:UnitSymbol.m3 cim100:UnitSymbol.lm cim100:UnitSymbol.lx cim100:UnitSymbol.sr cim100:UnitSymbol.VPerHz cim100:UnitSymbol.VPerVA cim100:UnitSymbol.WPerm2 cim100:UnitSymbol.WPermK cim100:UnitSymbol.WPersr cim100:UnitSymbol.katPerm3 cim100:UnitSymbol.JPermolK cim100:UnitSymbol.ohmPerm cim100:UnitSymbol.onePerm cim100:UnitSymbol.cosPhi cim100:UnitSymbol.HzPerHz cim100:UnitSymbol.m3Uncompensated cim100:UnitSymbol.charPers cim100:UnitSymbol.kgPerJ cim100:UnitSymbol.m2Pers cim100:UnitSymbol.m3Perh cim100:UnitSymbol.m3Pers cim100:UnitSymbol.mPerm3 cim100:UnitSymbol.mPers2 cim100:UnitSymbol.character cim100:UnitSymbol.kgPerm3 cim100:UnitSymbol.JPerkgK cim100:UnitSymbol.JPermol cim100:UnitSymbol.onePerHz cim100:UnitSymbol.m3Perkg cim100:UnitSymbol.WPerm2sr cim100:UnitSymbol.APerA cim100:UnitSymbol.APerm cim100:UnitSymbol.FPerm cim100:UnitSymbol.HPerm cim100:UnitSymbol.JPerK cim100:UnitSymbol.JPers cim100:UnitSymbol.KPers cim100:UnitSymbol.NPerm cim100:UnitSymbol.SPerm cim100:UnitSymbol.VPerV cim100:UnitSymbol.VPerm cim100:UnitSymbol.WPerA cim100:UnitSymbol.WPerW cim100:UnitSymbol.WPers cim100:UnitSymbol.count cim100:UnitSymbol.gPerg cim100:UnitSymbol.lPerh cim100:UnitSymbol.lPerl cim100:UnitSymbol.lPers cim100:UnitSymbol.mPers cim100:UnitSymbol.sPers cim100:UnitSymbol.therm cim100:UnitSymbol.tonne cim100:UnitSymbol.m3Compensated cim100:UnitSymbol.anglemin cim100:UnitSymbol.anglesec cim100:UnitSymbol.A2h cim100:UnitSymbol.A2s cim100:UnitSymbol.Btu cim100:UnitSymbol.Pas cim100:UnitSymbol.V2h cim100:UnitSymbol.VAh cim100:UnitSymbol.VAr cim100:UnitSymbol.bar cim100:UnitSymbol.dBm cim100:UnitSymbol.deg cim100:UnitSymbol.ft3 cim100:UnitSymbol.gal cim100:UnitSymbol.kat cim100:UnitSymbol.kgm cim100:UnitSymbol.min cim100:UnitSymbol.mol cim100:UnitSymbol.ohm cim100:UnitSymbol.ppm cim100:UnitSymbol.rad cim100:UnitSymbol.rev cim100:UnitSymbol.radPers cim100:UnitSymbol.molPerkg cim100:UnitSymbol.molPerm3 cim100:UnitSymbol.rotPers cim100:UnitSymbol.VPerVAr cim100:UnitSymbol.radPers2 cim100:UnitSymbol.VArh cim100:UnitSymbol.degC cim100:UnitSymbol.kgm2 cim100:UnitSymbol.mmHg cim100:UnitSymbol.none cim100:UnitSymbol.ohmm cim100:UnitSymbol.molPermol cim100:UnitSymbol.CPerkg cim100:UnitSymbol.CPerm2 cim100:UnitSymbol.CPerm3 cim100:UnitSymbol.GyPers ) ] . cim100:UnitSymbol.A a owl:NamedIndividual ; skos:notation "UnitSymbol_A" ; rdfs:label "A"@en ; rdfs:comment "Current in amperes." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.C a owl:NamedIndividual ; skos:notation "UnitSymbol_C" ; rdfs:label "C"@en ; rdfs:comment "Electric charge in coulombs (A·s)." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.F a owl:NamedIndividual ; skos:notation "UnitSymbol_F" ; rdfs:label "F"@en ; rdfs:comment "Electric capacitance in farads (C/V)." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.G a owl:NamedIndividual ; skos:notation "UnitSymbol_G" ; rdfs:label "G"@en ; rdfs:comment "Magnetic flux density, gausses (1 G = 10-4 T)." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.H a owl:NamedIndividual ; skos:notation "UnitSymbol_H" ; rdfs:label "H"@en ; rdfs:comment "Electric inductance in henrys (Wb/A)." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.J a owl:NamedIndividual ; skos:notation "UnitSymbol_J" ; rdfs:label "J"@en ; rdfs:comment "Energy in joules (N·m = C·V = W·s)." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.K a owl:NamedIndividual ; skos:notation "UnitSymbol_K" ; rdfs:label "K"@en ; rdfs:comment "Temperature in kelvins." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.M a owl:NamedIndividual ; skos:notation "UnitSymbol_M" ; rdfs:label "M"@en ; rdfs:comment "Length, nautical miles (1 M = 1852 m)." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.N a owl:NamedIndividual ; skos:notation "UnitSymbol_N" ; rdfs:label "N"@en ; rdfs:comment "Force in newtons (kg·m/s²)." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.Q a owl:NamedIndividual ; skos:notation "UnitSymbol_Q" ; rdfs:label "Q"@en ; rdfs:comment "Quantity power, Q." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.S a owl:NamedIndividual ; skos:notation "UnitSymbol_S" ; rdfs:label "S"@en ; rdfs:comment "Conductance in siemens." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.T a owl:NamedIndividual ; skos:notation "UnitSymbol_T" ; rdfs:label "T"@en ; rdfs:comment "Magnetic flux density in teslas (Wb/m2)." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.V a owl:NamedIndividual ; skos:notation "UnitSymbol_V" ; rdfs:label "V"@en ; rdfs:comment "Electric potential in volts (W/A)." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.W a owl:NamedIndividual ; skos:notation "UnitSymbol_W" ; rdfs:label "W"@en ; rdfs:comment "Real power in watts (J/s). Electrical power may have real and reactive components. The real portion of electrical power (I²R or VIcos(phi)), is expressed in Watts. See also apparent power and reactive power." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.d a owl:NamedIndividual ; skos:notation "UnitSymbol_d" ; rdfs:label "d"@en ; rdfs:comment "Time in days, day = 24 h = 86400 s." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.h a owl:NamedIndividual ; skos:notation "UnitSymbol_h" ; rdfs:label "h"@en ; rdfs:comment "Time in hours, hour = 60 min = 3600 s." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.l a owl:NamedIndividual ; skos:notation "UnitSymbol_l" ; rdfs:label "l"@en ; rdfs:comment "Volume in litres, litre = dm3 = m3/1000." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.m a owl:NamedIndividual ; skos:notation "UnitSymbol_m" ; rdfs:label "m"@en ; rdfs:comment "Length in metres." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.s a owl:NamedIndividual ; skos:notation "UnitSymbol_s" ; rdfs:label "s"@en ; rdfs:comment "Time in seconds." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.HzPers a owl:NamedIndividual ; skos:notation "UnitSymbol_HzPers" ; rdfs:label "HzPers"@en ; rdfs:comment "Rate of change of frequency in hertz per second." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.JPerkg a owl:NamedIndividual ; skos:notation "UnitSymbol_JPerkg" ; rdfs:label "JPerkg"@en ; rdfs:comment "Specific energy, Joules / kg." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.JPerm2 a owl:NamedIndividual ; skos:notation "UnitSymbol_JPerm2" ; rdfs:label "JPerm2"@en ; rdfs:comment "Insulation energy density, joules per square metre or watt second per square metre." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.JPerm3 a owl:NamedIndividual ; skos:notation "UnitSymbol_JPerm3" ; rdfs:label "JPerm3"@en ; rdfs:comment "Energy density, joules per cubic metre." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.PaPers a owl:NamedIndividual ; skos:notation "UnitSymbol_PaPers" ; rdfs:label "PaPers"@en ; rdfs:comment "Pressure change rate in pascals per second." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.A2 a owl:NamedIndividual ; skos:notation "UnitSymbol_A2" ; rdfs:label "A2"@en ; rdfs:comment "Amperes squared (A²)." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.Ah a owl:NamedIndividual ; skos:notation "UnitSymbol_Ah" ; rdfs:label "Ah"@en ; rdfs:comment "Ampere-hours, ampere-hours." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.As a owl:NamedIndividual ; skos:notation "UnitSymbol_As" ; rdfs:label "As"@en ; rdfs:comment "Ampere seconds (A·s)." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.Bq a owl:NamedIndividual ; skos:notation "UnitSymbol_Bq" ; rdfs:label "Bq"@en ; rdfs:comment "Radioactivity in becquerels (1/s)." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.Gy a owl:NamedIndividual ; skos:notation "UnitSymbol_Gy" ; rdfs:label "Gy"@en ; rdfs:comment "Absorbed dose in grays (J/kg)." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.Hz a owl:NamedIndividual ; skos:notation "UnitSymbol_Hz" ; rdfs:label "Hz"@en ; rdfs:comment "Frequency in hertz (1/s)." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.Mx a owl:NamedIndividual ; skos:notation "UnitSymbol_Mx" ; rdfs:label "Mx"@en ; rdfs:comment "Magnetic flux, maxwells (1 Mx = 10-8 Wb)." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.Nm a owl:NamedIndividual ; skos:notation "UnitSymbol_Nm" ; rdfs:label "Nm"@en ; rdfs:comment "Moment of force, newton metres." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.Oe a owl:NamedIndividual ; skos:notation "UnitSymbol_Oe" ; rdfs:label "Oe"@en ; rdfs:comment "Magnetic field in oersteds, (1 Oe = (103/4p) A/m)." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.Pa a owl:NamedIndividual ; skos:notation "UnitSymbol_Pa" ; rdfs:label "Pa"@en ; rdfs:comment "Pressure in pascals (N/m²). Note: the absolute or relative measurement of pressure is implied with this entry. See below for more explicit forms." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.Qh a owl:NamedIndividual ; skos:notation "UnitSymbol_Qh" ; rdfs:label "Qh"@en ; rdfs:comment "Quantity energy, Qh." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.Sv a owl:NamedIndividual ; skos:notation "UnitSymbol_Sv" ; rdfs:label "Sv"@en ; rdfs:comment "Dose equivalent in sieverts (J/kg)." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.V2 a owl:NamedIndividual ; skos:notation "UnitSymbol_V2" ; rdfs:label "V2"@en ; rdfs:comment "Volt squared (W²/A²)." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.VA a owl:NamedIndividual ; skos:notation "UnitSymbol_VA" ; rdfs:label "VA"@en ; rdfs:comment "Apparent power in volt amperes. See also real power and reactive power." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.Vh a owl:NamedIndividual ; skos:notation "UnitSymbol_Vh" ; rdfs:label "Vh"@en ; rdfs:comment "Volt-hour, Volt hours." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.Vs a owl:NamedIndividual ; skos:notation "UnitSymbol_Vs" ; rdfs:label "Vs"@en ; rdfs:comment "Volt seconds (Ws/A)." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.Wb a owl:NamedIndividual ; skos:notation "UnitSymbol_Wb" ; rdfs:label "Wb"@en ; rdfs:comment "Magnetic flux in webers (V·s)." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.Wh a owl:NamedIndividual ; skos:notation "UnitSymbol_Wh" ; rdfs:label "Wh"@en ; rdfs:comment "Real energy in watt hours." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.dB a owl:NamedIndividual ; skos:notation "UnitSymbol_dB" ; rdfs:label "dB"@en ; rdfs:comment "Sound pressure level in decibels. Note: multiplier “d” is included in this unit symbol for compatibility with IEC 61850-7-3." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.cd a owl:NamedIndividual ; skos:notation "UnitSymbol_cd" ; rdfs:label "cd"@en ; rdfs:comment "Luminous intensity in candelas." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.ha a owl:NamedIndividual ; skos:notation "UnitSymbol_ha" ; rdfs:label "ha"@en ; rdfs:comment "Area, hectares." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.kg a owl:NamedIndividual ; skos:notation "UnitSymbol_kg" ; rdfs:label "kg"@en ; rdfs:comment "Mass in kilograms. Note: multiplier “k” is included in this unit symbol for compatibility with IEC 61850-7-3." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.kn a owl:NamedIndividual ; skos:notation "UnitSymbol_kn" ; rdfs:label "kn"@en ; rdfs:comment "Speed, knots (1 kn = 1852/3600) m/s." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.m2 a owl:NamedIndividual ; skos:notation "UnitSymbol_m2" ; rdfs:label "m2"@en ; rdfs:comment "Area in square metres (m²)." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.m3 a owl:NamedIndividual ; skos:notation "UnitSymbol_m3" ; rdfs:label "m3"@en ; rdfs:comment "Volume in cubic metres (m³)." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.lm a owl:NamedIndividual ; skos:notation "UnitSymbol_lm" ; rdfs:label "lm"@en ; rdfs:comment "Luminous flux in lumens (cd·sr)." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.lx a owl:NamedIndividual ; skos:notation "UnitSymbol_lx" ; rdfs:label "lx"@en ; rdfs:comment "Illuminance in lux (lm/m²)." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.sr a owl:NamedIndividual ; skos:notation "UnitSymbol_sr" ; rdfs:label "sr"@en ; rdfs:comment "Solid angle in steradians (m2/m2)." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.VPerHz a owl:NamedIndividual ; skos:notation "UnitSymbol_VPerHz" ; rdfs:label "VPerHz"@en ; rdfs:comment "Magnetic flux in volt per hertz." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.VPerVA a owl:NamedIndividual ; skos:notation "UnitSymbol_VPerVA" ; rdfs:label "VPerVA"@en ; rdfs:comment "Power factor, PF, the ratio of the active power to the apparent power. Note: The sign convention used for power factor will differ between IEC meters and EEI (ANSI) meters. It is assumed that the data consumers understand the type of meter being used and agree on the sign convention in use at any given utility." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.WPerm2 a owl:NamedIndividual ; skos:notation "UnitSymbol_WPerm2" ; rdfs:label "WPerm2"@en ; rdfs:comment "Heat flux density, irradiance, watts per square metre." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.WPermK a owl:NamedIndividual ; skos:notation "UnitSymbol_WPermK" ; rdfs:label "WPermK"@en ; rdfs:comment "Thermal conductivity in watt/metres kelvin." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.WPersr a owl:NamedIndividual ; skos:notation "UnitSymbol_WPersr" ; rdfs:label "WPersr"@en ; rdfs:comment "Radiant intensity, watts per steradian." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.katPerm3 a owl:NamedIndividual ; skos:notation "UnitSymbol_katPerm3" ; rdfs:label "katPerm3"@en ; rdfs:comment "Catalytic activity concentration, katals per cubic metre." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.JPermolK a owl:NamedIndividual ; skos:notation "UnitSymbol_JPermolK" ; rdfs:label "JPermolK"@en ; rdfs:comment "Molar entropy, molar heat capacity, joules per mole kelvin." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.ohmPerm a owl:NamedIndividual ; skos:notation "UnitSymbol_ohmPerm" ; rdfs:label "ohmPerm"@en ; rdfs:comment "Electric resistance per length in ohms per metre ((V/A)/m)." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.onePerm a owl:NamedIndividual ; skos:notation "UnitSymbol_onePerm" ; rdfs:label "onePerm"@en ; rdfs:comment "Wavenumber, reciprocal metres, (1/m)." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.cosPhi a owl:NamedIndividual ; skos:notation "UnitSymbol_cosPhi" ; rdfs:label "cosPhi"@en ; rdfs:comment """Power factor, dimensionless. Note 1: This definition of power factor only holds for balanced systems. See the alternative definition under code 153. Note 2 : Beware of differing sign conventions in use between the IEC and EEI. It is assumed that the data consumer understands the type of meter in use and the sign convention in use by the utility.""" ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.HzPerHz a owl:NamedIndividual ; skos:notation "UnitSymbol_HzPerHz" ; rdfs:label "HzPerHz"@en ; rdfs:comment "Frequency, rate of frequency change. Note: Users may need to supply a prefix such as ‘m’ to show rates such as ‘mHz/Hz’." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.m3Uncompensated a owl:NamedIndividual ; skos:notation "UnitSymbol_m3Uncompensated" ; rdfs:label "m3Uncompensated"@en ; rdfs:comment "Volume, cubic metres, with the value uncompensated for weather effects." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.charPers a owl:NamedIndividual ; skos:notation "UnitSymbol_charPers" ; rdfs:label "charPers"@en ; rdfs:comment "Data rate (baud) in characters per second." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.kgPerJ a owl:NamedIndividual ; skos:notation "UnitSymbol_kgPerJ" ; rdfs:label "kgPerJ"@en ; rdfs:comment "Weight per energy in kilograms per joule (kg/J). Note: multiplier “k” is included in this unit symbol for compatibility with IEC 61850-7-3." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.m2Pers a owl:NamedIndividual ; skos:notation "UnitSymbol_m2Pers" ; rdfs:label "m2Pers"@en ; rdfs:comment "Viscosity in square metres / second (m²/s)." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.m3Perh a owl:NamedIndividual ; skos:notation "UnitSymbol_m3Perh" ; rdfs:label "m3Perh"@en ; rdfs:comment "Volumetric flow rate, cubic metres per hour." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.m3Pers a owl:NamedIndividual ; skos:notation "UnitSymbol_m3Pers" ; rdfs:label "m3Pers"@en ; rdfs:comment "Volumetric flow rate in cubic metres per second (m³/s)." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.mPerm3 a owl:NamedIndividual ; skos:notation "UnitSymbol_mPerm3" ; rdfs:label "mPerm3"@en ; rdfs:comment "Fuel efficiency in metres per cubic metres (m/m³)." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.mPers2 a owl:NamedIndividual ; skos:notation "UnitSymbol_mPers2" ; rdfs:label "mPers2"@en ; rdfs:comment "Acceleration in metres per second squared (m/s²)." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.character a owl:NamedIndividual ; skos:notation "UnitSymbol_character" ; rdfs:label "character"@en ; rdfs:comment "Number of characters." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.kgPerm3 a owl:NamedIndividual ; skos:notation "UnitSymbol_kgPerm3" ; rdfs:label "kgPerm3"@en ; rdfs:comment "Density in kilogram/cubic metres (kg/m³). Note: multiplier “k” is included in this unit symbol for compatibility with IEC 61850-7-3." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.JPerkgK a owl:NamedIndividual ; skos:notation "UnitSymbol_JPerkgK" ; rdfs:label "JPerkgK"@en ; rdfs:comment "Specific heat capacity, specific entropy, joules per kilogram Kelvin." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.JPermol a owl:NamedIndividual ; skos:notation "UnitSymbol_JPermol" ; rdfs:label "JPermol"@en ; rdfs:comment "Molar energy, joules per mole." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.onePerHz a owl:NamedIndividual ; skos:notation "UnitSymbol_onePerHz" ; rdfs:label "onePerHz"@en ; rdfs:comment "Reciprocal of frequency (1/Hz)." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.m3Perkg a owl:NamedIndividual ; skos:notation "UnitSymbol_m3Perkg" ; rdfs:label "m3Perkg"@en ; rdfs:comment "Specific volume, cubic metres per kilogram, v." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.WPerm2sr a owl:NamedIndividual ; skos:notation "UnitSymbol_WPerm2sr" ; rdfs:label "WPerm2sr"@en ; rdfs:comment "Radiance, watts per square metre steradian." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.APerA a owl:NamedIndividual ; skos:notation "UnitSymbol_APerA" ; rdfs:label "APerA"@en ; rdfs:comment "Current, ratio of amperages. Note: Users may need to supply a prefix such as ‘m’ to show rates such as ‘mA/A’." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.APerm a owl:NamedIndividual ; skos:notation "UnitSymbol_APerm" ; rdfs:label "APerm"@en ; rdfs:comment "A/m, magnetic field strength, amperes per metre." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.FPerm a owl:NamedIndividual ; skos:notation "UnitSymbol_FPerm" ; rdfs:label "FPerm"@en ; rdfs:comment "Permittivity, farads per metre." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.HPerm a owl:NamedIndividual ; skos:notation "UnitSymbol_HPerm" ; rdfs:label "HPerm"@en ; rdfs:comment "Permeability, henrys per metre." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.JPerK a owl:NamedIndividual ; skos:notation "UnitSymbol_JPerK" ; rdfs:label "JPerK"@en ; rdfs:comment "Heat capacity in joules/kelvin." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.JPers a owl:NamedIndividual ; skos:notation "UnitSymbol_JPers" ; rdfs:label "JPers"@en ; rdfs:comment "Energy rate in joules per second (J/s)." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.KPers a owl:NamedIndividual ; skos:notation "UnitSymbol_KPers" ; rdfs:label "KPers"@en ; rdfs:comment "Temperature change rate in kelvins per second." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.NPerm a owl:NamedIndividual ; skos:notation "UnitSymbol_NPerm" ; rdfs:label "NPerm"@en ; rdfs:comment "Surface tension, newton per metre." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.SPerm a owl:NamedIndividual ; skos:notation "UnitSymbol_SPerm" ; rdfs:label "SPerm"@en ; rdfs:comment "Conductance per length (F/m)." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.VPerV a owl:NamedIndividual ; skos:notation "UnitSymbol_VPerV" ; rdfs:label "VPerV"@en ; rdfs:comment "Voltage, ratio of voltages. Note: Users may need to supply a prefix such as ‘m’ to show rates such as ‘mV/V’." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.VPerm a owl:NamedIndividual ; skos:notation "UnitSymbol_VPerm" ; rdfs:label "VPerm"@en ; rdfs:comment "Electric field strength, volts per metre." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.WPerA a owl:NamedIndividual ; skos:notation "UnitSymbol_WPerA" ; rdfs:label "WPerA"@en ; rdfs:comment "Active power per current flow, watts per Ampere." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.WPerW a owl:NamedIndividual ; skos:notation "UnitSymbol_WPerW" ; rdfs:label "WPerW"@en ; rdfs:comment "Signal Strength, ratio of power. Note: Users may need to supply a prefix such as ‘m’ to show rates such as ‘mW/W’." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.WPers a owl:NamedIndividual ; skos:notation "UnitSymbol_WPers" ; rdfs:label "WPers"@en ; rdfs:comment "Ramp rate in watts per second." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.count a owl:NamedIndividual ; skos:notation "UnitSymbol_count" ; rdfs:label "count"@en ; rdfs:comment "Amount of substance, Counter value." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.gPerg a owl:NamedIndividual ; skos:notation "UnitSymbol_gPerg" ; rdfs:label "gPerg"@en ; rdfs:comment "Concentration, The ratio of the mass of a solute divided by the mass of the solution. Note: Users may need use a prefix such a ‘µ’ to express a quantity such as ‘µg/g’." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.lPerh a owl:NamedIndividual ; skos:notation "UnitSymbol_lPerh" ; rdfs:label "lPerh"@en ; rdfs:comment "Volumetric flow rate, litres per hour." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.lPerl a owl:NamedIndividual ; skos:notation "UnitSymbol_lPerl" ; rdfs:label "lPerl"@en ; rdfs:comment "Concentration, The ratio of the volume of a solute divided by the volume of the solution. Note: Users may need use a prefix such a ‘µ’ to express a quantity such as ‘µL/L’." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.lPers a owl:NamedIndividual ; skos:notation "UnitSymbol_lPers" ; rdfs:label "lPers"@en ; rdfs:comment "Volumetric flow rate in litres per second." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.mPers a owl:NamedIndividual ; skos:notation "UnitSymbol_mPers" ; rdfs:label "mPers"@en ; rdfs:comment "Velocity in metres per second (m/s)." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.sPers a owl:NamedIndividual ; skos:notation "UnitSymbol_sPers" ; rdfs:label "sPers"@en ; rdfs:comment "Time, Ratio of time. Note: Users may need to supply a prefix such as ‘µ’ to show rates such as ‘µs/s’." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.therm a owl:NamedIndividual ; skos:notation "UnitSymbol_therm" ; rdfs:label "therm"@en ; rdfs:comment "Energy, therms." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.tonne a owl:NamedIndividual ; skos:notation "UnitSymbol_tonne" ; rdfs:label "tonne"@en ; rdfs:comment "Mass in tons, “tonne” or “metric ton” (1000 kg = 1 Mg)." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.m3Compensated a owl:NamedIndividual ; skos:notation "UnitSymbol_m3Compensated" ; rdfs:label "m3Compensated"@en ; rdfs:comment "Volume, cubic metres, with the value compensated for weather effects." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.anglemin a owl:NamedIndividual ; skos:notation "UnitSymbol_anglemin" ; rdfs:label "anglemin"@en ; rdfs:comment "Plane angle, minutes." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.anglesec a owl:NamedIndividual ; skos:notation "UnitSymbol_anglesec" ; rdfs:label "anglesec"@en ; rdfs:comment "Plane angle, seconds." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.A2h a owl:NamedIndividual ; skos:notation "UnitSymbol_A2h" ; rdfs:label "A2h"@en ; rdfs:comment "Ampere-squared hour, ampere-squared hour." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.A2s a owl:NamedIndividual ; skos:notation "UnitSymbol_A2s" ; rdfs:label "A2s"@en ; rdfs:comment "Ampere squared time in square amperes (A²s)." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.Btu a owl:NamedIndividual ; skos:notation "UnitSymbol_Btu" ; rdfs:label "Btu"@en ; rdfs:comment "Energy, British Thermal Units." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.Pas a owl:NamedIndividual ; skos:notation "UnitSymbol_Pas" ; rdfs:label "Pas"@en ; rdfs:comment "Dynamic viscosity, pascal seconds." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.V2h a owl:NamedIndividual ; skos:notation "UnitSymbol_V2h" ; rdfs:label "V2h"@en ; rdfs:comment "Volt-squared hour, volt-squared-hours." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.VAh a owl:NamedIndividual ; skos:notation "UnitSymbol_VAh" ; rdfs:label "VAh"@en ; rdfs:comment "Apparent energy in volt ampere hours." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.VAr a owl:NamedIndividual ; skos:notation "UnitSymbol_VAr" ; rdfs:label "VAr"@en ; rdfs:comment """Reactive power in volt amperes reactive. The “reactive” or “imaginary” component of electrical power (VIsin(phi)). (See also real power and apparent power). Note: Different meter designs use different methods to arrive at their results. Some meters may compute reactive power as an arithmetic value, while others compute the value vectorially. The data consumer should determine the method in use and the suitability of the measurement for the intended purpose.""" ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.bar a owl:NamedIndividual ; skos:notation "UnitSymbol_bar" ; rdfs:label "bar"@en ; rdfs:comment "Pressure in bars, (1 bar = 100 kPa)." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.dBm a owl:NamedIndividual ; skos:notation "UnitSymbol_dBm" ; rdfs:label "dBm"@en ; rdfs:comment "Power level (logarithmic ratio of signal strength , Bel-mW), normalized to 1mW. Note: multiplier “d” is included in this unit symbol for compatibility with IEC 61850-7-3." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.deg a owl:NamedIndividual ; skos:notation "UnitSymbol_deg" ; rdfs:label "deg"@en ; rdfs:comment "Plane angle in degrees." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.ft3 a owl:NamedIndividual ; skos:notation "UnitSymbol_ft3" ; rdfs:label "ft3"@en ; rdfs:comment "Volume, cubic feet." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.gal a owl:NamedIndividual ; skos:notation "UnitSymbol_gal" ; rdfs:label "gal"@en ; rdfs:comment "Volume in gallons, US gallon (1 gal = 231 in3 = 128 fl ounce)." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.kat a owl:NamedIndividual ; skos:notation "UnitSymbol_kat" ; rdfs:label "kat"@en ; rdfs:comment "Catalytic activity, katal = mol / s." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.kgm a owl:NamedIndividual ; skos:notation "UnitSymbol_kgm" ; rdfs:label "kgm"@en ; rdfs:comment "Moment of mass in kilogram metres (kg·m) (first moment of mass). Note: multiplier “k” is included in this unit symbol for compatibility with IEC 61850-7-3." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.min a owl:NamedIndividual ; skos:notation "UnitSymbol_min" ; rdfs:label "min"@en ; rdfs:comment "Time in minutes, minute = 60 s." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.mol a owl:NamedIndividual ; skos:notation "UnitSymbol_mol" ; rdfs:label "mol"@en ; rdfs:comment "Amount of substance in moles." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.ohm a owl:NamedIndividual ; skos:notation "UnitSymbol_ohm" ; rdfs:label "ohm"@en ; rdfs:comment "Electric resistance in ohms (V/A)." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.ppm a owl:NamedIndividual ; skos:notation "UnitSymbol_ppm" ; rdfs:label "ppm"@en ; rdfs:comment "Concentration in parts per million." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.rad a owl:NamedIndividual ; skos:notation "UnitSymbol_rad" ; rdfs:label "rad"@en ; rdfs:comment "Plane angle in radians (m/m)." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.rev a owl:NamedIndividual ; skos:notation "UnitSymbol_rev" ; rdfs:label "rev"@en ; rdfs:comment "Amount of rotation, revolutions." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.radPers a owl:NamedIndividual ; skos:notation "UnitSymbol_radPers" ; rdfs:label "radPers"@en ; rdfs:comment "Angular velocity in radians per second (rad/s)." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.molPerkg a owl:NamedIndividual ; skos:notation "UnitSymbol_molPerkg" ; rdfs:label "molPerkg"@en ; rdfs:comment "Concentration, Molality, the amount of solute in moles and the amount of solvent in kilograms." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.molPerm3 a owl:NamedIndividual ; skos:notation "UnitSymbol_molPerm3" ; rdfs:label "molPerm3"@en ; rdfs:comment "Concentration, The amount of substance concentration, (c), the amount of solvent in moles divided by the volume of solution in m³." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.rotPers a owl:NamedIndividual ; skos:notation "UnitSymbol_rotPers" ; rdfs:label "rotPers"@en ; rdfs:comment "Rotations per second (1/s). See also Hz (1/s)." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.VPerVAr a owl:NamedIndividual ; skos:notation "UnitSymbol_VPerVAr" ; rdfs:label "VPerVAr"@en ; rdfs:comment "Power factor, PF, the ratio of the active power to the apparent power. Note: The sign convention used for power factor will differ between IEC meters and EEI (ANSI) meters. It is assumed that the data consumers understand the type of meter being used and agree on the sign convention in use at any given utility." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.radPers2 a owl:NamedIndividual ; skos:notation "UnitSymbol_radPers2" ; rdfs:label "radPers2"@en ; rdfs:comment "Angular acceleration, radians per second squared." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.VArh a owl:NamedIndividual ; skos:notation "UnitSymbol_VArh" ; rdfs:label "VArh"@en ; rdfs:comment "Reactive energy in volt ampere reactive hours." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.degC a owl:NamedIndividual ; skos:notation "UnitSymbol_degC" ; rdfs:label "degC"@en ; rdfs:comment """Relative temperature in degrees Celsius. In the SI unit system the symbol is °C. Electric charge is measured in coulomb that has the unit symbol C. To distinguish degree Celsius from coulomb the symbol used in the UML is degC. The reason for not using °C is that the special character ° is difficult to manage in software.""" ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.kgm2 a owl:NamedIndividual ; skos:notation "UnitSymbol_kgm2" ; rdfs:label "kgm2"@en ; rdfs:comment "Moment of mass in kilogram square metres (kg·m²) (Second moment of mass, commonly called the moment of inertia). Note: multiplier “k” is included in this unit symbol for compatibility with IEC 61850-7-3." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.mmHg a owl:NamedIndividual ; skos:notation "UnitSymbol_mmHg" ; rdfs:label "mmHg"@en ; rdfs:comment "Pressure, millimetres of mercury (1 mmHg is approximately 133.3 Pa)." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.none a owl:NamedIndividual ; skos:notation "UnitSymbol_none" ; rdfs:label "none"@en ; rdfs:comment "Dimension less quantity, e.g. count, per unit, etc." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.ohmm a owl:NamedIndividual ; skos:notation "UnitSymbol_ohmm" ; rdfs:label "ohmm"@en ; rdfs:comment "Resistivity, ohm metres, (rho)." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.molPermol a owl:NamedIndividual ; skos:notation "UnitSymbol_molPermol" ; rdfs:label "molPermol"@en ; rdfs:comment "Concentration, Molar fraction, the ratio of the molar amount of a solute divided by the molar amount of the solution." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.CPerkg a owl:NamedIndividual ; skos:notation "UnitSymbol_CPerkg" ; rdfs:label "CPerkg"@en ; rdfs:comment "Exposure (x rays), coulombs per kilogram." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.CPerm2 a owl:NamedIndividual ; skos:notation "UnitSymbol_CPerm2" ; rdfs:label "CPerm2"@en ; rdfs:comment "Surface charge density, coulombs per square metre." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.CPerm3 a owl:NamedIndividual ; skos:notation "UnitSymbol_CPerm3" ; rdfs:label "CPerm3"@en ; rdfs:comment "Electric charge density, coulombs per cubic metre." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . cim100:UnitSymbol.GyPers a owl:NamedIndividual ; skos:notation "UnitSymbol_GyPers" ; rdfs:label "GyPers"@en ; rdfs:comment "Absorbed dose rate, grays per second." ; rdfschemaextensions19990926:stereotype "enum" ; a cim100:UnitSymbol . pav:createdOn a owl:AnnotationProperty . pav:lastUpdatedOn a owl:AnnotationProperty . pav:version a owl:AnnotationProperty . dcterms:conformsTo a owl:AnnotationProperty . dcterms:creator a owl:AnnotationProperty . dcterms:identifier a owl:AnnotationProperty . dcterms:language a owl:AnnotationProperty . dcterms:publisher a owl:AnnotationProperty . dcterms:rights a owl:AnnotationProperty . dcterms:rightsHolder a owl:AnnotationProperty . dcat:keyword a owl:AnnotationProperty . dcat:landingPage a owl:AnnotationProperty . dcat:theme a owl:AnnotationProperty . vann:preferredNamespacePrefix a owl:AnnotationProperty . vann:preferredNamespaceUri a owl:AnnotationProperty . rdfschemaextensions19990926:belongsToCategory a owl:AnnotationProperty . rdfschemaextensions19990926:stereotype a owl:AnnotationProperty . rdfschemaextensions19990926:AssociationUsed a owl:AnnotationProperty . rdfschemaextensions19990926:inverseRoleName a owl:AnnotationProperty . rdfschemaextensions19990926:multiplicity a owl:AnnotationProperty . rdfschemaextensions19990926:dataType a owl:AnnotationProperty . rdfschemaextensions19990926:isFixed a owl:AnnotationProperty . skos:notation a owl:AnnotationProperty . sh:declare a owl:AnnotationProperty . sh:prefix a owl:AnnotationProperty . sh:namespace a owl:AnnotationProperty .