@prefix rdf: . @prefix owl: . @prefix rdfs: . @prefix xml: . @prefix xsd: . a owl:Ontology; "DY"; owl:incompatibleWith ; "https://www.entsoe.eu/digital/cim/cim-for-grid-models-exchange/"; "vocabulary"@en; owl:versionIRI ; "urn:iso:std:iec:61970-600-2:ed-1", "urn:iso:std:iec:61970-301:ed-7:amd1", "urn:iso:std:iec:61970-302:ed-1", "file://iec61970cim17v40_iec61968cim13v13a_iec62325cim03v17a.eap", "urn:iso:std:iec:61970-501:draft:ed-2"; owl:versionInfo "1.0.0"@en; "ENTSO-E CIM EG"@en; "This vocabulary is describing the dynamics profile from IEC 61970-600-2."@en; "ba96da07-eca3-4259-b96c-cf5b51baa082"; "2021-01-27T12:27:24Z"^^xsd:dateTime; "en-GB"; "2020-10-12"^^xsd:date; "ENTSO-E"@en; "Copyright"@en; "ENTSO-E"@en; "Dynamics Vocabulary"@en . a ; rdfs:label "DynamicsProfile"@en; rdfs:comment "This is the IEC 61970-457 profile." . a ; rdfs:label "Base"@en; rdfs:comment "Content of the base CIM published as IEC 61970-301." . a ; rdfs:label "Dynamics"@en; rdfs:comment """The CIM dynamic model definitions reflect the most common IEEE or, in the case of wind models, IEC, representations of models as well as models included in some of the transient stability software widely used by utilities. These dynamic models are intended to ensure interoperability between different vendors’ software products currently in use by electric utility energy companies, utilities, Transmission System Operators (TSOs), Regional Transmission Organizations (RTOs), and Independent System Operators (ISOs). It is important to note that each vendor is free to select its own internal implementation of these models. Differences in vendor results, as long as they are within accepted engineering practice, caused by different internal representations, are acceptable. Unless explicitly stated otherwise, the following modelling conventions are followed: - limited integrators are of the non-windup type; - it shall be possible to enter a time constant of zero (where it makes sense).""" . a ; rdfs:label "Domain"@en; rdfs:comment """The domain package defines primitive datatypes that are used by classes in other packages. Stereotypes are used to describe the datatypes. The following stereotypes are defined: <<enumeration>> A list of permissible constant values. <<Primitive>> The most basic data types used to compose all other data types. <<CIMDatatype>> A datatype that contains a value attribute, an optional unit of measure and a unit multiplier. The unit and multiplier may be specified as a static variable initialized to the allowed value. <<Compound>> A composite of Primitive, enumeration, CIMDatatype or other Compound classes, as long as the Compound classes do not recurse. For all datatypes both positive and negative values are allowed unless stated otherwise for a particular datatype. """ . a rdfs:Class; rdfs:label "ActivePower"@en; rdfs:comment "Product of RMS value of the voltage and the RMS value of the in-phase component of the current."; "CIMDatatype"; . a rdf:Property; ; rdfs:label "value"@en; rdfs:domain ; ; . a rdfs:Class; rdfs:label "Float"@en; rdfs:comment "A floating point number. The range is unspecified and not limited."; "Primitive"; . a rdf:Property; ; rdfs:label "multiplier"@en; rdfs:domain ; rdfs:range ; ; "M" . a rdfs:Class; rdfs:label "UnitMultiplier"@en; rdfs:comment """The unit multipliers defined for the CIM. When applied to unit symbols, the unit symbol is treated as a derived unit. Regardless of the contents of the unit symbol text, the unit symbol shall be treated as if it were a single-character unit symbol. Unit symbols should not contain multipliers, and it should be left to the multiplier to define the multiple for an entire data type. For example, if a unit symbol is \"m2Pers\" and the multiplier is \"k\", then the value is k(m**2/s), and the multiplier applies to the entire final value, not to any individual part of the value. This can be conceptualized by substituting a derived unit symbol for the unit type. If one imagines that the symbol \"Þ\" represents the derived unit \"m2Pers\", then applying the multiplier \"k\" can be conceptualized simply as \"kÞ\". For example, the SI unit for mass is \"kg\" and not \"g\". If the unit symbol is defined as \"kg\", then the multiplier is applied to \"kg\" as a whole and does not replace the \"k\" in front of the \"g\". In this case, the multiplier of \"m\" would be used with the unit symbol of \"kg\" to represent one gram. As a text string, this violates the instructions in IEC 80000-1. However, because the unit symbol in CIM is treated as a derived unit instead of as an SI unit, it makes more sense to conceptualize the \"kg\" as if it were replaced by one of the proposed replacements for the SI mass symbol. If one imagines that the \"kg\" were replaced by a symbol \"Þ\", then it is easier to conceptualize the multiplier \"m\" as creating the proper unit \"mÞ\", and not the forbidden unit \"mkg\"."""; ; . a ; rdfs:label "y"@en; rdfs:comment "Yocto 10**-24."; "enum" . a ; rdfs:label "z"@en; rdfs:comment "Zepto 10**-21."; "enum" . a ; rdfs:label "a"@en; rdfs:comment "Atto 10**-18."; "enum" . a ; rdfs:label "f"@en; rdfs:comment "Femto 10**-15."; "enum" . a ; rdfs:label "p"@en; rdfs:comment "Pico 10**-12."; "enum" . a ; rdfs:label "n"@en; rdfs:comment "Nano 10**-9."; "enum" . a ; rdfs:label "micro"@en; rdfs:comment "Micro 10**-6."; "enum" . a ; rdfs:label "m"@en; rdfs:comment "Milli 10**-3."; "enum" . a ; rdfs:label "c"@en; rdfs:comment "Centi 10**-2."; "enum" . a ; rdfs:label "d"@en; rdfs:comment "Deci 10**-1."; "enum" . a ; rdfs:label "none"@en; rdfs:comment "No multiplier or equivalently multiply by 1."; "enum" . a ; rdfs:label "da"@en; rdfs:comment "Deca 10**1."; "enum" . a ; rdfs:label "h"@en; rdfs:comment "Hecto 10**2."; "enum" . a ; rdfs:label "k"@en; rdfs:comment "Kilo 10**3."; "enum" . a ; rdfs:label "M"@en; rdfs:comment "Mega 10**6."; "enum" . a ; rdfs:label "G"@en; rdfs:comment "Giga 10**9."; "enum" . a ; rdfs:label "T"@en; rdfs:comment "Tera 10**12."; "enum" . a ; rdfs:label "P"@en; rdfs:comment "Peta 10**15."; "enum" . a ; rdfs:label "E"@en; rdfs:comment "Exa 10**18."; "enum" . a ; rdfs:label "Z"@en; rdfs:comment "Zetta 10**21."; "enum" . a ; rdfs:label "Y"@en; rdfs:comment "Yotta 10**24."; "enum" . a rdf:Property; ; rdfs:label "unit"@en; rdfs:domain ; rdfs:range ; ; "W" . a rdfs:Class; rdfs:label "UnitSymbol"@en; rdfs:comment """The derived units defined for usage in the CIM. In some cases, the derived unit is equal to an SI unit. Whenever possible, the standard derived symbol is used instead of the formula for the derived unit. For example, the unit symbol Farad is defined as \"F\" instead of \"CPerV\". In cases where a standard symbol does not exist for a derived unit, the formula for the unit is used as the unit symbol. For example, density does not have a standard symbol and so it is represented as \"kgPerm3\". With the exception of the \"kg\", which is an SI unit, the unit symbols do not contain multipliers and therefore represent the base derived unit to which a multiplier can be applied as a whole. Every unit symbol is treated as an unparseable text as if it were a single-letter symbol. The meaning of each unit symbol is defined by the accompanying descriptive text and not by the text contents of the unit symbol. To allow the widest possible range of serializations without requiring special character handling, several substitutions are made which deviate from the format described in IEC 80000-1. The division symbol \"/\" is replaced by the letters \"Per\". Exponents are written in plain text after the unit as \"m3\" instead of being formatted as \"m\" with a superscript of 3 or introducing a symbol as in \"m^3\". The degree symbol \"°\" is replaced with the letters \"deg\". Any clarification of the meaning for a substitution is included in the description for the unit symbol. Non-SI units are included in list of unit symbols to allow sources of data to be correctly labelled with their non-SI units (for example, a GPS sensor that is reporting numbers that represent feet instead of meters). This allows software to use the unit symbol information correctly convert and scale the raw data of those sources into SI-based units. The integer values are used for harmonization with IEC 61850."""; ; . a ; rdfs:label "none"@en; rdfs:comment "Dimension less quantity, e.g. count, per unit, etc."; "enum" . a ; rdfs:label "m"@en; rdfs:comment "Length in metres."; "enum" . a ; rdfs:label "kg"@en; rdfs:comment "Mass in kilograms. Note: multiplier “k” is included in this unit symbol for compatibility with IEC 61850-7-3."; "enum" . a ; rdfs:label "s"@en; rdfs:comment "Time in seconds."; "enum" . a ; rdfs:label "A"@en; rdfs:comment "Current in amperes."; "enum" . a ; rdfs:label "K"@en; rdfs:comment "Temperature in kelvins."; "enum" . a ; rdfs:label "mol"@en; rdfs:comment "Amount of substance in moles."; "enum" . a ; rdfs:label "cd"@en; rdfs:comment "Luminous intensity in candelas."; "enum" . a ; rdfs:label "deg"@en; rdfs:comment "Plane angle in degrees."; "enum" . a ; rdfs:label "rad"@en; rdfs:comment "Plane angle in radians (m/m)."; "enum" . a ; rdfs:label "sr"@en; rdfs:comment "Solid angle in steradians (m2/m2)."; "enum" . a ; rdfs:label "Gy"@en; rdfs:comment "Absorbed dose in grays (J/kg)."; "enum" . a ; rdfs:label "Bq"@en; rdfs:comment "Radioactivity in becquerels (1/s)."; "enum" . a ; rdfs:label "degC"@en; rdfs:comment """Relative temperature in degrees Celsius. In the SI unit system the symbol is °C. Electric charge is measured in coulomb that has the unit symbol C. To distinguish degree Celsius from coulomb the symbol used in the UML is degC. The reason for not using °C is that the special character ° is difficult to manage in software."""; "enum" . a ; rdfs:label "Sv"@en; rdfs:comment "Dose equivalent in sieverts (J/kg)."; "enum" . a ; rdfs:label "F"@en; rdfs:comment "Electric capacitance in farads (C/V)."; "enum" . a ; rdfs:label "C"@en; rdfs:comment "Electric charge in coulombs (A·s)."; "enum" . a ; rdfs:label "S"@en; rdfs:comment "Conductance in siemens."; "enum" . a ; rdfs:label "H"@en; rdfs:comment "Electric inductance in henrys (Wb/A)."; "enum" . a ; rdfs:label "V"@en; rdfs:comment "Electric potential in volts (W/A)."; "enum" . a ; rdfs:label "ohm"@en; rdfs:comment "Electric resistance in ohms (V/A)."; "enum" . a ; rdfs:label "J"@en; rdfs:comment "Energy in joules (N·m = C·V = W·s)."; "enum" . a ; rdfs:label "N"@en; rdfs:comment "Force in newtons (kg·m/s²)."; "enum" . a ; rdfs:label "Hz"@en; rdfs:comment "Frequency in hertz (1/s)."; "enum" . a ; rdfs:label "lx"@en; rdfs:comment "Illuminance in lux (lm/m²)."; "enum" . a ; rdfs:label "lm"@en; rdfs:comment "Luminous flux in lumens (cd·sr)."; "enum" . a ; rdfs:label "Wb"@en; rdfs:comment "Magnetic flux in webers (V·s)."; "enum" . a ; rdfs:label "T"@en; rdfs:comment "Magnetic flux density in teslas (Wb/m2)."; "enum" . a ; rdfs:label "W"@en; rdfs:comment "Real power in watts (J/s). Electrical power may have real and reactive components. The real portion of electrical power (I²R or VIcos(phi)), is expressed in Watts. See also apparent power and reactive power."; "enum" . a ; rdfs:label "Pa"@en; rdfs:comment "Pressure in pascals (N/m²). Note: the absolute or relative measurement of pressure is implied with this entry. See below for more explicit forms."; "enum" . a ; rdfs:label "m2"@en; rdfs:comment "Area in square metres (m²)."; "enum" . a ; rdfs:label "m3"@en; rdfs:comment "Volume in cubic metres (m³)."; "enum" . a ; rdfs:label "mPers"@en; rdfs:comment "Velocity in metres per second (m/s)."; "enum" . a ; rdfs:label "mPers2"@en; rdfs:comment "Acceleration in metres per second squared (m/s²)."; "enum" . a ; rdfs:label "m3Pers"@en; rdfs:comment "Volumetric flow rate in cubic metres per second (m³/s)."; "enum" . a ; rdfs:label "mPerm3"@en; rdfs:comment "Fuel efficiency in metres per cubic metres (m/m³)."; "enum" . a ; rdfs:label "kgm"@en; rdfs:comment "Moment of mass in kilogram metres (kg·m) (first moment of mass). Note: multiplier “k” is included in this unit symbol for compatibility with IEC 61850-7-3."; "enum" . a ; rdfs:label "kgPerm3"@en; rdfs:comment "Density in kilogram/cubic metres (kg/m³). Note: multiplier “k” is included in this unit symbol for compatibility with IEC 61850-7-3."; "enum" . a ; rdfs:label "m2Pers"@en; rdfs:comment "Viscosity in square metres / second (m²/s)."; "enum" . a ; rdfs:label "WPermK"@en; rdfs:comment "Thermal conductivity in watt/metres kelvin."; "enum" . a ; rdfs:label "JPerK"@en; rdfs:comment "Heat capacity in joules/kelvin."; "enum" . a ; rdfs:label "ppm"@en; rdfs:comment "Concentration in parts per million."; "enum" . a ; rdfs:label "rotPers"@en; rdfs:comment "Rotations per second (1/s). See also Hz (1/s)."; "enum" . a ; rdfs:label "radPers"@en; rdfs:comment "Angular velocity in radians per second (rad/s)."; "enum" . a ; rdfs:label "WPerm2"@en; rdfs:comment "Heat flux density, irradiance, watts per square metre."; "enum" . a ; rdfs:label "JPerm2"@en; rdfs:comment "Insulation energy density, joules per square metre or watt second per square metre."; "enum" . a ; rdfs:label "SPerm"@en; rdfs:comment "Conductance per length (F/m)."; "enum" . a ; rdfs:label "KPers"@en; rdfs:comment "Temperature change rate in kelvins per second."; "enum" . a ; rdfs:label "PaPers"@en; rdfs:comment "Pressure change rate in pascals per second."; "enum" . a ; rdfs:label "JPerkgK"@en; rdfs:comment "Specific heat capacity, specific entropy, joules per kilogram Kelvin."; "enum" . a ; rdfs:label "VA"@en; rdfs:comment "Apparent power in volt amperes. See also real power and reactive power."; "enum" . a ; rdfs:label "VAr"@en; rdfs:comment """Reactive power in volt amperes reactive. The “reactive” or “imaginary” component of electrical power (VIsin(phi)). (See also real power and apparent power). Note: Different meter designs use different methods to arrive at their results. Some meters may compute reactive power as an arithmetic value, while others compute the value vectorially. The data consumer should determine the method in use and the suitability of the measurement for the intended purpose."""; "enum" . a ; rdfs:label "cosPhi"@en; rdfs:comment """Power factor, dimensionless. Note 1: This definition of power factor only holds for balanced systems. See the alternative definition under code 153. Note 2 : Beware of differing sign conventions in use between the IEC and EEI. It is assumed that the data consumer understands the type of meter in use and the sign convention in use by the utility."""; "enum" . a ; rdfs:label "Vs"@en; rdfs:comment "Volt seconds (Ws/A)."; "enum" . a ; rdfs:label "V2"@en; rdfs:comment "Volt squared (W²/A²)."; "enum" . a ; rdfs:label "As"@en; rdfs:comment "Ampere seconds (A·s)."; "enum" . a ; rdfs:label "A2"@en; rdfs:comment "Amperes squared (A²)."; "enum" . a ; rdfs:label "A2s"@en; rdfs:comment "Ampere squared time in square amperes (A²s)."; "enum" . a ; rdfs:label "VAh"@en; rdfs:comment "Apparent energy in volt ampere hours."; "enum" . a ; rdfs:label "Wh"@en; rdfs:comment "Real energy in watt hours."; "enum" . a ; rdfs:label "VArh"@en; rdfs:comment "Reactive energy in volt ampere reactive hours."; "enum" . a ; rdfs:label "VPerHz"@en; rdfs:comment "Magnetic flux in volt per hertz."; "enum" . a ; rdfs:label "HzPers"@en; rdfs:comment "Rate of change of frequency in hertz per second."; "enum" . a ; rdfs:label "character"@en; rdfs:comment "Number of characters."; "enum" . a ; rdfs:label "charPers"@en; rdfs:comment "Data rate (baud) in characters per second."; "enum" . a ; rdfs:label "kgm2"@en; rdfs:comment "Moment of mass in kilogram square metres (kg·m²) (Second moment of mass, commonly called the moment of inertia). Note: multiplier “k” is included in this unit symbol for compatibility with IEC 61850-7-3."; "enum" . a ; rdfs:label "dB"@en; rdfs:comment "Sound pressure level in decibels. Note: multiplier “d” is included in this unit symbol for compatibility with IEC 61850-7-3."; "enum" . a ; rdfs:label "WPers"@en; rdfs:comment "Ramp rate in watts per second."; "enum" . a ; rdfs:label "lPers"@en; rdfs:comment "Volumetric flow rate in litres per second."; "enum" . a ; rdfs:label "dBm"@en; rdfs:comment "Power level (logarithmic ratio of signal strength , Bel-mW), normalized to 1mW. Note: multiplier “d” is included in this unit symbol for compatibility with IEC 61850-7-3."; "enum" . a ; rdfs:label "h"@en; rdfs:comment "Time in hours, hour = 60 min = 3600 s."; "enum" . a ; rdfs:label "min"@en; rdfs:comment "Time in minutes, minute = 60 s."; "enum" . a ; rdfs:label "Q"@en; rdfs:comment "Quantity power, Q."; "enum" . a ; rdfs:label "Qh"@en; rdfs:comment "Quantity energy, Qh."; "enum" . a ; rdfs:label "ohmm"@en; rdfs:comment "Resistivity, ohm metres, (rho)."; "enum" . a ; rdfs:label "APerm"@en; rdfs:comment "A/m, magnetic field strength, amperes per metre."; "enum" . a ; rdfs:label "V2h"@en; rdfs:comment "Volt-squared hour, volt-squared-hours."; "enum" . a ; rdfs:label "A2h"@en; rdfs:comment "Ampere-squared hour, ampere-squared hour."; "enum" . a ; rdfs:label "Ah"@en; rdfs:comment "Ampere-hours, ampere-hours."; "enum" . a ; rdfs:label "count"@en; rdfs:comment "Amount of substance, Counter value."; "enum" . a ; rdfs:label "ft3"@en; rdfs:comment "Volume, cubic feet."; "enum" . a ; rdfs:label "m3Perh"@en; rdfs:comment "Volumetric flow rate, cubic metres per hour."; "enum" . a ; rdfs:label "gal"@en; rdfs:comment "Volume in gallons, US gallon (1 gal = 231 in3 = 128 fl ounce)."; "enum" . a ; rdfs:label "Btu"@en; rdfs:comment "Energy, British Thermal Units."; "enum" . a ; rdfs:label "l"@en; rdfs:comment "Volume in litres, litre = dm3 = m3/1000."; "enum" . a ; rdfs:label "lPerh"@en; rdfs:comment "Volumetric flow rate, litres per hour."; "enum" . a ; rdfs:label "lPerl"@en; rdfs:comment "Concentration, The ratio of the volume of a solute divided by the volume of the solution. Note: Users may need use a prefix such a ‘µ’ to express a quantity such as ‘µL/L’."; "enum" . a ; rdfs:label "gPerg"@en; rdfs:comment "Concentration, The ratio of the mass of a solute divided by the mass of the solution. Note: Users may need use a prefix such a ‘µ’ to express a quantity such as ‘µg/g’."; "enum" . a ; rdfs:label "molPerm3"@en; rdfs:comment "Concentration, The amount of substance concentration, (c), the amount of solvent in moles divided by the volume of solution in m³."; "enum" . a ; rdfs:label "molPermol"@en; rdfs:comment "Concentration, Molar fraction, the ratio of the molar amount of a solute divided by the molar amount of the solution."; "enum" . a ; rdfs:label "molPerkg"@en; rdfs:comment "Concentration, Molality, the amount of solute in moles and the amount of solvent in kilograms."; "enum" . a ; rdfs:label "sPers"@en; rdfs:comment "Time, Ratio of time. Note: Users may need to supply a prefix such as ‘µ’ to show rates such as ‘µs/s’."; "enum" . a ; rdfs:label "HzPerHz"@en; rdfs:comment "Frequency, rate of frequency change. Note: Users may need to supply a prefix such as ‘m’ to show rates such as ‘mHz/Hz’."; "enum" . a ; rdfs:label "VPerV"@en; rdfs:comment "Voltage, ratio of voltages. Note: Users may need to supply a prefix such as ‘m’ to show rates such as ‘mV/V’."; "enum" . a ; rdfs:label "APerA"@en; rdfs:comment "Current, ratio of amperages. Note: Users may need to supply a prefix such as ‘m’ to show rates such as ‘mA/A’."; "enum" . a ; rdfs:label "VPerVA"@en; rdfs:comment "Power factor, PF, the ratio of the active power to the apparent power. Note: The sign convention used for power factor will differ between IEC meters and EEI (ANSI) meters. It is assumed that the data consumers understand the type of meter being used and agree on the sign convention in use at any given utility."; "enum" . a ; rdfs:label "rev"@en; rdfs:comment "Amount of rotation, revolutions."; "enum" . a ; rdfs:label "kat"@en; rdfs:comment "Catalytic activity, katal = mol / s."; "enum" . a ; rdfs:label "JPerkg"@en; rdfs:comment "Specific energy, Joules / kg."; "enum" . a ; rdfs:label "m3Uncompensated"@en; rdfs:comment "Volume, cubic metres, with the value uncompensated for weather effects."; "enum" . a ; rdfs:label "m3Compensated"@en; rdfs:comment "Volume, cubic metres, with the value compensated for weather effects."; "enum" . a ; rdfs:label "WPerW"@en; rdfs:comment "Signal Strength, ratio of power. Note: Users may need to supply a prefix such as ‘m’ to show rates such as ‘mW/W’."; "enum" . a ; rdfs:label "therm"@en; rdfs:comment "Energy, therms."; "enum" . a ; rdfs:label "onePerm"@en; rdfs:comment "Wavenumber, reciprocal metres, (1/m)."; "enum" . a ; rdfs:label "m3Perkg"@en; rdfs:comment "Specific volume, cubic metres per kilogram, v."; "enum" . a ; rdfs:label "Pas"@en; rdfs:comment "Dynamic viscosity, pascal seconds."; "enum" . a ; rdfs:label "Nm"@en; rdfs:comment "Moment of force, newton metres."; "enum" . a ; rdfs:label "NPerm"@en; rdfs:comment "Surface tension, newton per metre."; "enum" . a ; rdfs:label "radPers2"@en; rdfs:comment "Angular acceleration, radians per second squared."; "enum" . a ; rdfs:label "JPerm3"@en; rdfs:comment "Energy density, joules per cubic metre."; "enum" . a ; rdfs:label "VPerm"@en; rdfs:comment "Electric field strength, volts per metre."; "enum" . a ; rdfs:label "CPerm3"@en; rdfs:comment "Electric charge density, coulombs per cubic metre."; "enum" . a ; rdfs:label "CPerm2"@en; rdfs:comment "Surface charge density, coulombs per square metre."; "enum" . a ; rdfs:label "FPerm"@en; rdfs:comment "Permittivity, farads per metre."; "enum" . a ; rdfs:label "HPerm"@en; rdfs:comment "Permeability, henrys per metre."; "enum" . a ; rdfs:label "JPermol"@en; rdfs:comment "Molar energy, joules per mole."; "enum" . a ; rdfs:label "JPermolK"@en; rdfs:comment "Molar entropy, molar heat capacity, joules per mole kelvin."; "enum" . a ; rdfs:label "CPerkg"@en; rdfs:comment "Exposure (x rays), coulombs per kilogram."; "enum" . a ; rdfs:label "GyPers"@en; rdfs:comment "Absorbed dose rate, grays per second."; "enum" . a ; rdfs:label "WPersr"@en; rdfs:comment "Radiant intensity, watts per steradian."; "enum" . a ; rdfs:label "WPerm2sr"@en; rdfs:comment "Radiance, watts per square metre steradian."; "enum" . a ; rdfs:label "katPerm3"@en; rdfs:comment "Catalytic activity concentration, katals per cubic metre."; "enum" . a ; rdfs:label "d"@en; rdfs:comment "Time in days, day = 24 h = 86400 s."; "enum" . a ; rdfs:label "anglemin"@en; rdfs:comment "Plane angle, minutes."; "enum" . a ; rdfs:label "anglesec"@en; rdfs:comment "Plane angle, seconds."; "enum" . a ; rdfs:label "ha"@en; rdfs:comment "Area, hectares."; "enum" . a ; rdfs:label "tonne"@en; rdfs:comment "Mass in tons, “tonne” or “metric ton” (1000 kg = 1 Mg)."; "enum" . a ; rdfs:label "bar"@en; rdfs:comment "Pressure in bars, (1 bar = 100 kPa)."; "enum" . a ; rdfs:label "mmHg"@en; rdfs:comment "Pressure, millimetres of mercury (1 mmHg is approximately 133.3 Pa)."; "enum" . a ; rdfs:label "M"@en; rdfs:comment "Length, nautical miles (1 M = 1852 m)."; "enum" . a ; rdfs:label "kn"@en; rdfs:comment "Speed, knots (1 kn = 1852/3600) m/s."; "enum" . a ; rdfs:label "Mx"@en; rdfs:comment "Magnetic flux, maxwells (1 Mx = 10-8 Wb)."; "enum" . a ; rdfs:label "G"@en; rdfs:comment "Magnetic flux density, gausses (1 G = 10-4 T)."; "enum" . a ; rdfs:label "Oe"@en; rdfs:comment "Magnetic field in oersteds, (1 Oe = (103/4p) A/m)."; "enum" . a ; rdfs:label "Vh"@en; rdfs:comment "Volt-hour, Volt hours."; "enum" . a ; rdfs:label "WPerA"@en; rdfs:comment "Active power per current flow, watts per Ampere."; "enum" . a ; rdfs:label "onePerHz"@en; rdfs:comment "Reciprocal of frequency (1/Hz)."; "enum" . a ; rdfs:label "VPerVAr"@en; rdfs:comment "Power factor, PF, the ratio of the active power to the apparent power. Note: The sign convention used for power factor will differ between IEC meters and EEI (ANSI) meters. It is assumed that the data consumers understand the type of meter being used and agree on the sign convention in use at any given utility."; "enum" . a ; rdfs:label "ohmPerm"@en; rdfs:comment "Electric resistance per length in ohms per metre ((V/A)/m)."; "enum" . a ; rdfs:label "kgPerJ"@en; rdfs:comment "Weight per energy in kilograms per joule (kg/J). Note: multiplier “k” is included in this unit symbol for compatibility with IEC 61850-7-3."; "enum" . a ; rdfs:label "JPers"@en; rdfs:comment "Energy rate in joules per second (J/s)."; "enum" . a rdfs:Class; rdfs:label "AngleDegrees"@en; rdfs:comment "Measurement of angle in degrees."; "CIMDatatype"; . a rdf:Property; ; rdfs:label "value"@en; rdfs:domain ; ; . a rdf:Property; ; rdfs:label "unit"@en; rdfs:domain ; rdfs:range ; ; "deg" . a rdf:Property; ; rdfs:label "multiplier"@en; rdfs:domain ; rdfs:range ; ; "none" . a rdfs:Class; rdfs:label "ApparentPower"@en; rdfs:comment "Product of the RMS value of the voltage and the RMS value of the current."; "CIMDatatype"; . a rdf:Property; ; rdfs:label "value"@en; rdfs:domain ; ; . a rdf:Property; ; rdfs:label "multiplier"@en; rdfs:domain ; rdfs:range ; ; "M" . a rdf:Property; ; rdfs:label "unit"@en; rdfs:domain ; rdfs:range ; ; "VA" . a rdfs:Class; rdfs:label "Area"@en; rdfs:comment "Area."; "CIMDatatype"; . a rdf:Property; ; rdfs:label "value"@en; rdfs:domain ; ; . a rdf:Property; ; rdfs:label "unit"@en; rdfs:domain ; rdfs:range ; ; "m2" . a rdf:Property; ; rdfs:label "multiplier"@en; rdfs:domain ; rdfs:range ; ; "none" . a rdfs:Class; rdfs:label "Frequency"@en; rdfs:comment "Cycles per second."; "CIMDatatype"; . a rdf:Property; ; rdfs:label "value"@en; rdfs:domain ; ; . a rdf:Property; ; rdfs:label "unit"@en; rdfs:domain ; rdfs:range ; ; "Hz" . a rdf:Property; ; rdfs:label "multiplier"@en; rdfs:domain ; rdfs:range ; ; "none" . a rdfs:Class; rdfs:label "Length"@en; rdfs:comment "Unit of length. It shall be a positive value or zero."; "CIMDatatype"; . a rdf:Property; ; rdfs:label "value"@en; rdfs:domain ; ; . a rdf:Property; ; rdfs:label "unit"@en; rdfs:domain ; rdfs:range ; ; "m" . a rdf:Property; ; rdfs:label "multiplier"@en; rdfs:domain ; rdfs:range ; ; "k" . a rdfs:Class; rdfs:label "PU"@en; rdfs:comment "Per Unit - a positive or negative value referred to a defined base. Values typically range from -10 to +10."; "CIMDatatype"; . a rdf:Property; ; rdfs:label "value"@en; rdfs:domain ; ; . a rdf:Property; ; rdfs:label "unit"@en; rdfs:domain ; rdfs:range ; ; "none" . a rdf:Property; ; rdfs:label "multiplier"@en; rdfs:domain ; rdfs:range ; ; "none" . a rdfs:Class; rdfs:label "Seconds"@en; rdfs:comment "Time, in seconds."; "CIMDatatype"; . a rdf:Property; ; rdfs:label "value"@en; rdfs:domain ; ; ; rdfs:comment "Time, in seconds" . a rdf:Property; ; rdfs:label "unit"@en; rdfs:domain ; rdfs:range ; ; "s" . a rdf:Property; ; rdfs:label "multiplier"@en; rdfs:domain ; rdfs:range ; ; "none" . a rdfs:Class; rdfs:label "Temperature"@en; rdfs:comment "Value of temperature in degrees Celsius."; "CIMDatatype"; . a rdf:Property; ; rdfs:label "multiplier"@en; rdfs:domain ; rdfs:range ; ; "none" . a rdf:Property; ; rdfs:label "unit"@en; rdfs:domain ; rdfs:range ; ; "degC" . a rdf:Property; ; rdfs:label "value"@en; rdfs:domain ; ; . a rdfs:Class; rdfs:label "VolumeFlowRate"@en; rdfs:comment "Volume per time."; "CIMDatatype"; . a rdf:Property; ; rdfs:label "multiplier"@en; rdfs:domain ; rdfs:range ; ; "none" . a rdf:Property; ; rdfs:label "unit"@en; rdfs:domain ; rdfs:range ; ; "m3Pers" . a rdf:Property; ; rdfs:label "value"@en; rdfs:domain ; ; . a rdfs:Class; rdfs:label "Boolean"@en; rdfs:comment "A type with the value space \"true\" and \"false\"."; "Primitive"; . a rdfs:Class; rdfs:label "Date"@en; rdfs:comment "Date as \"yyyy-mm-dd\", which conforms with ISO 8601. UTC time zone is specified as \"yyyy-mm-ddZ\". A local timezone relative UTC is specified as \"yyyy-mm-dd(+/-)hh:mm\"."; "Primitive"; . a rdfs:Class; rdfs:label "Integer"@en; rdfs:comment "An integer number. The range is unspecified and not limited."; "Primitive"; . a rdfs:Class; rdfs:label "String"@en; rdfs:comment "A string consisting of a sequence of characters. The character encoding is UTF-8. The string length is unspecified and unlimited."; "Primitive"; . a rdfs:Class; rdfs:label "DroopSignalFeedbackKind"@en; rdfs:comment "Governor droop signal feedback source."; ; . a ; rdfs:label "electricalPower"@en; rdfs:comment "Electrical power feedback (connection indicated as 1 in the block diagrams of models, e.g. GovCT1, GovCT2)."; "enum" . a ; rdfs:label "none"@en; rdfs:comment "No droop signal feedback, is isochronous governor."; "enum" . a ; rdfs:label "fuelValveStroke"@en; rdfs:comment "Fuel valve stroke feedback (true stroke) (connection indicated as 2 in the block diagrams of model, e.g. GovCT1, GovCT2)."; "enum" . a ; rdfs:label "governorOutput"@en; rdfs:comment "Governor output feedback (requested stroke) (connection indicated as 3 in the block diagrams of models, e.g. GovCT1, GovCT2)."; "enum" . a rdfs:Class; rdfs:label "ExcIEEEST1AUELselectorKind"@en; rdfs:comment "Types of connections for the UEL input used in ExcIEEEST1A."; ; . a ; rdfs:label "ignoreUELsignal"@en; rdfs:comment "Ignore UEL signal."; "enum" . rdfs:label "inputHVgateVoltageOutput"@en; rdfs:comment "UEL input HV gate with voltage regulator output."; a ; "enum" . a ; rdfs:label "inputHVgateErrorSignal"@en; rdfs:comment "UEL input HV gate with error signal."; "enum" . a ; rdfs:label "inputAddedToErrorSignal"@en; rdfs:comment "UEL input added to error signal."; "enum" . a rdfs:Class; rdfs:label "ExcREXSFeedbackSignalKind"@en; rdfs:comment "Types of rate feedback signals. "; ; . a ; rdfs:label "fieldVoltage"@en; rdfs:comment "The voltage regulator output voltage is used. It is the same as exciter field voltage."; "enum" . a ; rdfs:label "fieldCurrent"@en; rdfs:comment "The exciter field current is used."; "enum" . a ; rdfs:label "outputVoltage"@en; rdfs:comment "The output voltage of the exciter is used."; "enum" . a rdfs:Class; rdfs:label "ExcST6BOELselectorKind"@en; rdfs:comment "Types of connections for the OEL input used for static excitation systems type 6B."; ; . a ; rdfs:label "noOELinput"@en; rdfs:comment "No OEL input is used. Corresponds to OELin not = 1 and not = 2 on the ExcST6B diagram. Original ExcST6B model would have called this OELin = 0."; "enum" . a ; rdfs:label "beforeUEL"@en; rdfs:comment "The connection is before UEL. Corresponds to OELin = 1 on the ExcST6B diagram."; "enum" . a ; rdfs:label "afterUEL"@en; rdfs:comment "The connection is after UEL. Corresponds to OELin = 2 on the ExcST6B diagram."; "enum" . a rdfs:Class; rdfs:label "ExcST7BOELselectorKind"@en; rdfs:comment "Types of connections for the OEL input used for static excitation systems type 7B."; ; . a ; rdfs:label "noOELinput"@en; rdfs:comment "No OEL input is used. Corresponds to OELin not = 1 and not = 2 and not = 3 on the ExcST7B diagram. Original ExcST7B model would have called this OELin = 0."; "enum" . a ; rdfs:label "addVref"@en; rdfs:comment "The signal is added to Vref. Corresponds to OELin = 1 on the ExcST7B diagram."; "enum" . a ; rdfs:label "inputLVgate"@en; rdfs:comment "The signal is connected into the input LVGate. Corresponds to OELin = 2 on the ExcST7B diagram."; "enum" . a ; rdfs:label "outputLVgate"@en; rdfs:comment "The signal is connected into the output LVGate. Corresponds to OELin = 3 on the ExcST7B diagram."; "enum" . a rdfs:Class; rdfs:label "ExcST7BUELselectorKind"@en; rdfs:comment "Types of connections for the UEL input used for static excitation systems type 7B."; ; . a ; rdfs:label "noUELinput"@en; rdfs:comment "No UEL input is used. Corresponds to UELin not = 1 and not = 2 and not = 3 on the ExcST7B diagram. Original ExcST7B model would have called this UELin = 0."; "enum" . a ; rdfs:label "addVref"@en; rdfs:comment "The signal is added to Vref. Corresponds to UELin = 1 on the ExcST7B diagram."; "enum" . a ; rdfs:label "inputHVgate"@en; rdfs:comment "The signal is connected into the input HVGate. Corresponds to UELin = 2 on the ExcST7B diagram."; "enum" . a ; rdfs:label "outputHVgate"@en; rdfs:comment "The signal is connected into the output HVGate. Corresponds to UELin = 3 on the ExcST7B diagram."; "enum" . a rdfs:Class; rdfs:label "FrancisGovernorControlKind"@en; rdfs:comment "Governor control flag for Francis hydro model."; ; . a ; rdfs:label "mechanicHydrolicTachoAccelerator"@en; rdfs:comment "Mechanic-hydraulic regulator with tacho-accelerometer (Cflag = 1)."; "enum" . a ; rdfs:label "mechanicHydraulicTransientFeedback"@en; rdfs:comment "Mechanic-hydraulic regulator with transient feedback (Cflag=2)."; "enum" . a ; rdfs:label "electromechanicalElectrohydraulic"@en; rdfs:comment "Electromechanical and electrohydraulic regulator (Cflag=3)."; "enum" . a rdfs:Class; rdfs:label "GenericNonLinearLoadModelKind"@en; rdfs:comment "Type of generic non-linear load model."; ; . a ; rdfs:label "exponentialRecovery"@en; rdfs:comment "Exponential recovery model."; "enum" . a ; rdfs:label "loadAdaptive"@en; rdfs:comment "Load adaptive model."; "enum" . a rdfs:Class; rdfs:label "GovHydro4ModelKind"@en; rdfs:comment "Possible types of GovHydro4 models."; ; . a ; rdfs:label "simple"@en; rdfs:comment "Simple model."; "enum" . a ; rdfs:label "francisPelton"@en; rdfs:comment "Francis or Pelton model."; "enum" . a ; rdfs:label "kaplan"@en; rdfs:comment "Kaplan model."; "enum" . a rdfs:Class; rdfs:label "IfdBaseKind"@en; rdfs:comment "Excitation base system mode."; ; . a ; rdfs:label "ifag"@en; rdfs:comment "Air gap line mode. "; "enum" . a ; rdfs:label "ifnl"@en; rdfs:comment "No load system with saturation mode. "; "enum" . a ; rdfs:label "iffl"@en; rdfs:comment "Full load system mode. "; "enum" . a rdfs:Class; rdfs:label "InputSignalKind"@en; rdfs:comment "Types of input signals. In dynamics modelling, commonly represented by the j parameter."; ; . a ; rdfs:label "rotorSpeed"@en; rdfs:comment "Input signal is rotor or shaft speed (angular frequency)."; "enum" . a ; rdfs:label "rotorAngularFrequencyDeviation"@en; rdfs:comment "Input signal is rotor or shaft angular frequency deviation."; "enum" . a ; rdfs:label "busFrequency"@en; rdfs:comment "Input signal is bus voltage frequency. This could be a terminal frequency or remote frequency."; "enum" . a ; rdfs:label "busFrequencyDeviation"@en; rdfs:comment "Input signal is deviation of bus voltage frequency. This could be a terminal frequency deviation or remote frequency deviation."; "enum" . a ; rdfs:label "generatorElectricalPower"@en; rdfs:comment "Input signal is generator electrical power on rated S."; "enum" . a ; rdfs:label "generatorAcceleratingPower"@en; rdfs:comment "Input signal is generator accelerating power."; "enum" . a ; rdfs:label "busVoltage"@en; rdfs:comment "Input signal is bus voltage. This could be a terminal voltage or remote voltage."; "enum" . a ; rdfs:label "busVoltageDerivative"@en; rdfs:comment "Input signal is derivative of bus voltage. This could be a terminal voltage derivative or remote voltage derivative."; "enum" . a ; rdfs:label "branchCurrent"@en; rdfs:comment "Input signal is amplitude of remote branch current."; "enum" . a ; rdfs:label "fieldCurrent"@en; rdfs:comment "Input signal is generator field current."; "enum" . a ; rdfs:label "generatorMechanicalPower"@en; rdfs:comment "Input signal is generator mechanical power."; "enum" . a rdfs:Class; rdfs:label "RemoteSignalKind"@en; rdfs:comment "Type of input signal coming from remote bus."; ; . a ; rdfs:label "remoteBusVoltageFrequency"@en; rdfs:comment "Input is voltage frequency from remote terminal bus."; "enum" . a ; rdfs:label "remoteBusVoltageFrequencyDeviation"@en; rdfs:comment "Input is voltage frequency deviation from remote terminal bus."; "enum" . a ; rdfs:label "remoteBusFrequency"@en; rdfs:comment "Input is frequency from remote terminal bus."; "enum" . a ; rdfs:label "remoteBusFrequencyDeviation"@en; rdfs:comment "Input is frequency deviation from remote terminal bus."; "enum" . a ; rdfs:label "remoteBusVoltageAmplitude"@en; rdfs:comment "Input is voltage amplitude from remote terminal bus."; "enum" . a ; rdfs:label "remoteBusVoltage"@en; rdfs:comment "Input is voltage from remote terminal bus."; "enum" . a ; rdfs:label "remoteBranchCurrentAmplitude"@en; rdfs:comment "Input is branch current amplitude from remote terminal bus."; "enum" . a ; rdfs:label "remoteBusVoltageAmplitudeDerivative"@en; rdfs:comment "Input is branch current amplitude derivative from remote terminal bus."; "enum" . a ; rdfs:label "remotePuBusVoltageDerivative"@en; rdfs:comment "Input is PU voltage derivative from remote terminal bus."; "enum" . a rdfs:Class; rdfs:label "RotorKind"@en; rdfs:comment "Type of rotor on physical machine."; ; . a ; rdfs:label "roundRotor"@en; rdfs:comment "Round rotor type of synchronous machine."; "enum" . a ; rdfs:label "salientPole"@en; rdfs:comment "Salient pole type of synchronous machine."; "enum" . a rdfs:Class; rdfs:label "StaticLoadModelKind"@en; rdfs:comment "Type of static load model."; ; . a ; rdfs:label "exponential"@en; rdfs:comment """This model is an exponential representation of the load. Exponential equations for active and reactive power are used and the following attributes are required: kp1, kp2, kp3, kpf, ep1, ep2, ep3 kq1, kq2, kq3, kqf, eq1, eq2, eq3."""; "enum" . a ; rdfs:label "zIP1"@en; rdfs:comment """This model integrates the frequency-dependent load (primarily motors). ZIP1 equations for active and reactive power are used and the following attributes are required: kp1, kp2, kp3, kpf kq1, kq2, kq3, kqf."""; "enum" . a ; rdfs:label "zIP2"@en; rdfs:comment """This model separates the frequency-dependent load (primarily motors) from other load. ZIP2 equations for active and reactive power are used and the following attributes are required: kp1, kp2, kp3, kq4, kpf kq1, kq2, kq3, kq4, kqf."""; "enum" . a ; rdfs:label "constantZ"@en; rdfs:comment "The load is represented as a constant impedance. ConstantZ equations are used for active and reactive power and no attributes are required."; "enum" . a rdfs:Class; rdfs:label "SynchronousMachineModelKind"@en; rdfs:comment "Type of synchronous machine model used in dynamic simulation applications."; ; . a ; rdfs:label "subtransient"@en; rdfs:comment "Subtransient synchronous machine model."; "enum" . a ; rdfs:label "subtransientTypeF"@en; rdfs:comment "WECC type F variant of subtransient synchronous machine model."; "enum" . a ; rdfs:label "subtransientTypeJ"@en; rdfs:comment "WECC type J variant of subtransient synchronous machine model."; "enum" . a ; rdfs:label "subtransientSimplified"@en; rdfs:comment "Simplified version of subtransient synchronous machine model where magnetic coupling between the direct- and quadrature- axes is ignored."; "enum" . a ; rdfs:label "subtransientSimplifiedDirectAxis"@en; rdfs:comment "Simplified version of a subtransient synchronous machine model with no damper circuit on the direct-axis. "; "enum" . a rdfs:Class; rdfs:label "WindLookupTableFunctionKind"@en; rdfs:comment "Function of the lookup table."; ; . a ; rdfs:label "prr"@en; rdfs:comment "Power versus speed change (negative slip) lookup table (prr(deltaomega)). It is used for the rotor resistance control model, IEC 61400-27-1:2015, 5.6.5.3. "; "enum" . a ; rdfs:label "omegap"@en; rdfs:comment "Power vs. speed lookup table (omega(p)). It is used for the P control model type 3, IEC 61400-27-1:2015, 5.6.5.4. "; "enum" . a ; rdfs:label "ipmax"@en; rdfs:comment "Lookup table for voltage dependency of active current limits (ipmax(uWT)). It is used for the current limitation model, IEC 61400-27-1:2015, 5.6.5.8. "; "enum" . a ; rdfs:label "iqmax"@en; rdfs:comment "Lookup table for voltage dependency of reactive current limits (iqmax(uWT)). It is used for the current limitation model, IEC 61400-27-1:2015, 5.6.5.8. "; "enum" . a ; rdfs:label "pwp"@en; rdfs:comment "Power vs. frequency lookup table (pWPbias(f)). It is used for the wind power plant frequency and active power control model, IEC 61400-27-1:2015, Annex D. "; "enum" . a ; rdfs:label "tcwdu"@en; rdfs:comment "Crowbar duration versus voltage variation look-up table (TCW(du)). It is a case-dependent parameter. It is used for the type 3B generator set model, IEC 61400-27-1:2015, 5.6.3.3. "; "enum" . a ; rdfs:label "tduwt"@en; rdfs:comment "Lookup table to determine the duration of the power reduction after a voltage dip, depending on the size of the voltage dip (Td(uWT)). It is a type-dependent parameter. It is used for the pitch control power model, IEC 61400-27-1:2015, 5.6.5.1. "; "enum" . a ; rdfs:label "qmaxp"@en; rdfs:comment "Lookup table for active power dependency of reactive power maximum limit (qmaxp(p)). It is used for the QP and QU limitation model, IEC 61400-27-1:2015, 5.6.5.10. "; "enum" . a ; rdfs:label "qminp"@en; rdfs:comment "Lookup table for active power dependency of reactive power minimum limit (qminp(p)). It is used for the QP and QU limitation model, IEC 61400-27-1:2015, 5.6.5.10. "; "enum" . a ; rdfs:label "qmaxu"@en; rdfs:comment "Lookup table for voltage dependency of reactive power maximum limit (qmaxu(p)). It is used for the QP and QU limitation model, IEC 61400-27-1:2015, 5.6.5.10. "; "enum" . a ; rdfs:label "qminu"@en; rdfs:comment "Lookup table for voltage dependency of reactive power minimum limit (qminu(p)). It is used for the QP and QU limitation model, IEC 61400-27-1:2015, 5.6.5.10. "; "enum" . a ; rdfs:label "tuover"@en; rdfs:comment "Disconnection time versus over-voltage lookup table (Tuover(uWT)). It is used for the grid protection model, IEC 61400-27-1:2015, 5.6.6. "; "enum" . a ; rdfs:label "tuunder"@en; rdfs:comment "Disconnection time versus under-voltage lookup table (Tuunder(uWT)). It is used for the grid protection model, IEC 61400-27-1:2015, 5.6.6. "; "enum" . a ; rdfs:label "tfover"@en; rdfs:comment "Disconnection time versus over-frequency lookup table (Tfover(fWT)). It is used for the grid protection model, IEC 61400-27-1:2015, 5.6.6. "; "enum" . a ; rdfs:label "tfunder"@en; rdfs:comment "Disconnection time versus under-frequency lookup table (Tfunder(fWT)). It is used for the grid protection model, IEC 61400-27-1:2015, 5.6.6. "; "enum" . a ; rdfs:label "qwp"@en; rdfs:comment "Look up table for the UQ static mode (qWP(uerr)). It is used for the voltage and reactive power control model, IEC 61400-27-1:2015, Annex D. "; "enum" . a rdfs:Class; rdfs:label "WindPlantQcontrolModeKind"@en; rdfs:comment "Reactive power/voltage controller mode."; ; . a ; rdfs:label "reactivePower"@en; rdfs:comment "Reactive power reference."; "enum" . a ; rdfs:label "powerFactor"@en; rdfs:comment "Power factor reference."; "enum" . a ; rdfs:label "uqStatic"@en; rdfs:comment "UQ static."; "enum" . a ; rdfs:label "voltageControl"@en; rdfs:comment "Voltage control."; "enum" . a rdfs:Class; rdfs:label "WindQcontrolModeKind"@en; rdfs:comment "General wind turbine Q control modes MqG."; ; . a ; rdfs:label "voltage"@en; rdfs:comment "Voltage control (MqG equals 0)."; "enum" . a ; rdfs:label "reactivePower"@en; rdfs:comment "Reactive power control (MqG equals 1)."; "enum" . a ; rdfs:label "openLoopReactivePower"@en; rdfs:comment "Open loop reactive power control (only used with closed loop at plant level) (MqG equals 2)."; "enum" . a ; rdfs:label "powerFactor"@en; rdfs:comment "Power factor control (MqG equals 3)."; "enum" . a ; rdfs:label "openLooppowerFactor"@en; rdfs:comment "Open loop power factor control (MqG equals 4)."; "enum" . a rdfs:Class; rdfs:label "WindUVRTQcontrolModeKind"@en; rdfs:comment "UVRT Q control modes MqUVRT."; ; . a ; rdfs:label "mode0"@en; rdfs:comment "Voltage-dependent reactive current injection (MqUVRT equals 0)."; "enum" . a ; rdfs:label "mode1"@en; rdfs:comment "Reactive current injection controlled as the pre-fault value plus an additional voltage dependent reactive current injection (MqUVRT equals 1)."; "enum" . a ; rdfs:label "mode2"@en; rdfs:comment "Reactive current injection controlled as the pre-fault value plus an additional voltage-dependent reactive current injection during fault, and as the pre-fault value plus an additional constant reactive current injection post fault (MqUVRT equals 2)."; "enum" . a ; rdfs:label "Core"@en; rdfs:comment "Contains the core PowerSystemResource and ConductingEquipment entities shared by all applications plus common collections of those entities. Not all applications require all the Core entities. This package does not depend on any other package except the Domain package, but most of the other packages have associations and generalizations that depend on it." . a rdfs:Class; rdfs:label "ACDCTerminal"@en; rdfs:subClassOf ; rdfs:comment "An electrical connection point (AC or DC) to a piece of conducting equipment. Terminals are connected at physical connection points called connectivity nodes."; . a rdfs:Class; rdfs:label "ConductingEquipment"@en; rdfs:subClassOf ; rdfs:comment "The parts of the AC power system that are designed to carry current or that are conductively connected through terminals."; . a rdf:Property; rdfs:label "ConductingEquipment"@en; rdfs:comment "The conducting equipment of the terminal. Conducting equipment have terminals that may be connected to other conducting equipment terminals via connectivity nodes or topological nodes."; rdfs:domain ; rdfs:range ; ; ; "Yes" . a rdf:Property; rdfs:label "Terminals"@en; rdfs:comment "Conducting equipment have terminals that may be connected to other conducting equipment terminals via connectivity nodes or topological nodes."; rdfs:domain ; rdfs:range ; ; ; "No" . a rdfs:Class; rdfs:label "Equipment"@en; rdfs:subClassOf ; rdfs:comment "The parts of a power system that are physical devices, electronic or mechanical."; . a rdfs:Class; rdfs:label "IdentifiedObject"@en; rdfs:comment "This is a root class to provide common identification for all classes needing identification and naming attributes."; . a rdf:Property; ; rdfs:label "description"@en; rdfs:domain ; ; ; rdfs:comment "The description is a free human readable text describing or naming the object. It may be non unique and may not correlate to a naming hierarchy." . a rdf:Property; ; rdfs:label "mRID"@en; rdfs:domain ; ; ; rdfs:comment """Master resource identifier issued by a model authority. The mRID is unique within an exchange context. Global uniqueness is easily achieved by using a UUID, as specified in RFC 4122, for the mRID. The use of UUID is strongly recommended. For CIMXML data files in RDF syntax conforming to IEC 61970-552, the mRID is mapped to rdf:ID or rdf:about attributes that identify CIM object elements.""" . a rdf:Property; ; rdfs:label "name"@en; rdfs:domain ; ; ; rdfs:comment "The name is any free human readable and possibly non unique text naming the object." . a rdfs:Class; rdfs:label "PowerSystemResource"@en; rdfs:subClassOf ; rdfs:comment "A power system resource (PSR) can be an item of equipment such as a switch, an equipment container containing many individual items of equipment such as a substation, or an organisational entity such as sub-control area. Power system resources can have measurements associated."; . a rdfs:Class; rdfs:label "Terminal"@en; rdfs:subClassOf ; rdfs:comment "An AC electrical connection point to a piece of conducting equipment. Terminals are connected at physical connection points called connectivity nodes."; . a rdf:Property; rdfs:label "Terminal"@en; rdfs:comment "Remote terminal with which this input signal is associated."; rdfs:domain ; rdfs:range ; ; ; "Yes" . a rdf:Property; rdfs:label "RemoteInputSignal"@en; rdfs:comment "Input signal coming from this terminal."; rdfs:domain ; rdfs:range ; ; ; "No" . a ; rdfs:label "Wires"@en; rdfs:comment "An extension to the Core and Topology package that models information on the electrical characteristics of Transmission and Distribution networks. This package is used by network applications such as State Estimation, Load Flow and Optimal Power Flow. " . a rdfs:Class; rdfs:label "AsynchronousMachine"@en; rdfs:subClassOf ; rdfs:comment "A rotating machine whose shaft rotates asynchronously with the electrical field. Also known as an induction machine with no external connection to the rotor windings, e.g. squirrel-cage induction machine."; . a rdf:Property; rdfs:label "AsynchronousMachine"@en; rdfs:comment "Asynchronous machine to which this asynchronous machine dynamics model applies."; rdfs:domain ; rdfs:range ; ; ; "Yes" . a rdf:Property; rdfs:label "AsynchronousMachineDynamics"@en; rdfs:comment "Asynchronous machine dynamics model used to describe dynamic behaviour of this asynchronous machine."; rdfs:domain ; rdfs:range ; ; ; "No" . a rdfs:Class; rdfs:label "EnergyConnection"@en; rdfs:subClassOf ; rdfs:comment "A connection of energy generation or consumption on the power system model."; . a rdfs:Class; rdfs:label "EnergyConsumer"@en; rdfs:subClassOf ; rdfs:comment """Generic user of energy - a point of consumption on the power system model. EnergyConsumer.pfixed, .qfixed, .pfixedPct and .qfixedPct have meaning only if there is no LoadResponseCharacteristic associated with EnergyConsumer or if LoadResponseCharacteristic.exponentModel is set to False."""; "Description", ; . a rdf:Property; rdfs:label "EnergyConsumer"@en; rdfs:comment "Energy consumer to which this dynamics load model applies."; rdfs:domain ; rdfs:range ; ; ; "No" . a rdf:Property; rdfs:label "LoadDynamics"@en; rdfs:comment "Load dynamics model used to describe dynamic behaviour of this energy consumer."; rdfs:domain ; rdfs:range ; ; ; "Yes" . a rdfs:Class; rdfs:label "PowerElectronicsConnection"@en; rdfs:subClassOf ; rdfs:comment "A connection to the AC network for energy production or consumption that uses power electronics rather than rotating machines."; . a rdf:Property; rdfs:label "PowerElectronicsConnection"@en; rdfs:comment "The power electronics connection associated with this wind turbine type 3 or type 4 dynamics model."; rdfs:domain ; rdfs:range ; ; ; "Yes" . a rdf:Property; rdfs:label "WindTurbineType3or4Dynamics"@en; rdfs:comment "The wind turbine type 3 or type 4 dynamics model associated with this power electronics connection."; rdfs:domain ; rdfs:range ; ; ; "No" . a rdfs:Class; rdfs:label "RegulatingCondEq"@en; rdfs:subClassOf ; rdfs:comment "A type of conducting equipment that can regulate a quantity (i.e. voltage or flow) at a specific point in the network. "; . a rdfs:Class; rdfs:label "RotatingMachine"@en; rdfs:subClassOf ; rdfs:comment "A rotating machine which may be used as a generator or motor."; . a rdfs:Class; rdfs:label "StaticVarCompensator"@en; rdfs:subClassOf ; rdfs:comment """A facility for providing variable and controllable shunt reactive power. The SVC typically consists of a stepdown transformer, filter, thyristor-controlled reactor, and thyristor-switched capacitor arms. The SVC may operate in fixed MVar output mode or in voltage control mode. When in voltage control mode, the output of the SVC will be proportional to the deviation of voltage at the controlled bus from the voltage setpoint. The SVC characteristic slope defines the proportion. If the voltage at the controlled bus is equal to the voltage setpoint, the SVC MVar output is zero."""; . a rdf:Property; rdfs:label "StaticVarCompensator"@en; rdfs:comment "Static Var Compensator to which Static Var Compensator dynamics model applies."; rdfs:domain ; rdfs:range ; ; ; "Yes" . a rdf:Property; rdfs:label "StaticVarCompensatorDynamics"@en; rdfs:comment "Static Var Compensator dynamics model used to describe dynamic behaviour of this Static Var Compensator."; rdfs:domain ; rdfs:range ; ; ; "No" . a rdfs:Class; rdfs:label "SynchronousMachine"@en; rdfs:subClassOf ; rdfs:comment "An electromechanical device that operates with shaft rotating synchronously with the network. It is a single machine operating either as a generator or synchronous condenser or pump."; . a rdf:Property; rdfs:label "SynchronousMachine"@en; rdfs:comment "Synchronous machine to which synchronous machine dynamics model applies."; rdfs:domain ; rdfs:range ; ; ; "Yes" . a rdf:Property; rdfs:label "SynchronousMachineDynamics"@en; rdfs:comment "Synchronous machine dynamics model used to describe dynamic behaviour of this synchronous machine."; rdfs:domain ; rdfs:range ; ; ; "No" . a ; rdfs:label "DC"@en; rdfs:comment "This package contains model for direct current equipment and controls." . a rdfs:Class; rdfs:label "ACDCConverter"@en; rdfs:subClassOf ; rdfs:comment "A unit with valves for three phases, together with unit control equipment, essential protective and switching devices, DC storage capacitors, phase reactors and auxiliaries, if any, used for conversion."; . a rdfs:Class; rdfs:label "CsConverter"@en; rdfs:subClassOf ; rdfs:comment """DC side of the current source converter (CSC). The firing angle controls the dc voltage at the converter, both for rectifier and inverter. The difference between the dc voltages of the rectifier and inverter determines the dc current. The extinction angle is used to limit the dc voltage at the inverter, if needed, and is not used in active power control. The firing angle, transformer tap position and number of connected filters are the primary means to control a current source dc line. Higher level controls are built on top, e.g. dc voltage, dc current and active power. From a steady state perspective it is sufficient to specify the wanted active power transfer (ACDCConverter.targetPpcc) and the control functions will set the dc voltage, dc current, firing angle, transformer tap position and number of connected filters to meet this. Therefore attributes targetAlpha and targetGamma are not applicable in this case. The reactive power consumed by the converter is a function of the firing angle, transformer tap position and number of connected filter, which can be approximated with half of the active power. The losses is a function of the dc voltage and dc current. The attributes minAlpha and maxAlpha define the range of firing angles for rectifier operation between which no discrete tap changer action takes place. The range is typically 10-18 degrees. The attributes minGamma and maxGamma define the range of extinction angles for inverter operation between which no discrete tap changer action takes place. The range is typically 17-20 degrees."""; . a rdf:Property; rdfs:label "CSConverter"@en; rdfs:comment "Current source converter to which current source converter dynamics model applies."; rdfs:domain ; rdfs:range ; ; ; "Yes" . a rdf:Property; rdfs:label "CSCDynamics"@en; rdfs:comment "Current source converter dynamics model used to describe dynamic behaviour of this converter."; rdfs:domain ; rdfs:range ; ; ; "No" . a rdfs:Class; rdfs:label "VsConverter"@en; rdfs:subClassOf ; rdfs:comment "DC side of the voltage source converter (VSC)."; . a rdf:Property; rdfs:label "VsConverter"@en; rdfs:comment "Voltage source converter to which voltage source converter dynamics model applies."; rdfs:domain ; rdfs:range ; ; ; "Yes" . a rdf:Property; rdfs:label "VSCDynamics"@en; rdfs:comment "Voltage source converter dynamics model used to describe dynamic behaviour of this converter."; rdfs:domain ; rdfs:range ; ; ; "No" . a ; rdfs:label "StandardInterconnections"@en; rdfs:comment """This subclause describes the standard interconnections for various types of equipment. These interconnections are understood by the application programs and can be identified based on the presence of one of the key classes with a relationship to the static power flow model: SynchronousMachineDynamics, AsynchronousMachineDynamics, EnergyConsumerDynamics or WindTurbineType3or4Dynamics. The relationships between classes expressed in the interconnection diagrams are intended to support dynamic behaviour described by either standard models or user-defined models. In the interconnection diagrams, boxes which are black in colour represent function blocks whose functionality can be provided by one of many standard models or by a user-defined model. Blue boxes represent specific standard models. A dashed box means that the function block or specific standard model is optional.""" . a rdfs:Class; rdfs:label "RemoteInputSignal"@en; rdfs:subClassOf ; rdfs:comment "Supports connection to a terminal associated with a remote bus from which an input signal of a specific type is coming."; ; . a rdf:Property; ; rdfs:label "remoteSignalType"@en; rdfs:domain ; rdfs:range ; ; rdfs:comment "Type of input signal." . a rdf:Property; rdfs:label "RemoteInputSignal"@en; rdfs:comment "Remote input signal used by this discontinuous excitation control system model."; rdfs:domain ; rdfs:range ; ; ; "No" . a rdf:Property; rdfs:label "DiscontinuousExcitationControlDynamics"@en; rdfs:comment "Discontinuous excitation control model using this remote input signal."; rdfs:domain ; rdfs:range ; ; ; "Yes" . a rdf:Property; rdfs:label "RemoteInputSignal"@en; rdfs:comment "Remote input signal used by this wind generator type 1 or type 2 model."; rdfs:domain ; rdfs:range ; ; ; "Yes" . a rdf:Property; rdfs:label "WindTurbineType1or2Dynamics"@en; rdfs:comment "Wind generator type 1 or type 2 model using this remote input signal."; rdfs:domain ; rdfs:range ; ; ; "No" . a rdf:Property; rdfs:label "RemoteInputSignal"@en; rdfs:comment "Remote input signal used by this power system stabilizer model."; rdfs:domain ; rdfs:range ; ; ; "No" . a rdf:Property; rdfs:label "PowerSystemStabilizerDynamics"@en; rdfs:comment "Power system stabilizer model using this remote input signal."; rdfs:domain ; rdfs:range ; ; ; "Yes" . a rdf:Property; rdfs:label "RemoteInputSignal"@en; rdfs:comment "Remote input signal used by this underexcitation limiter model."; rdfs:domain ; rdfs:range ; ; ; "No" . a rdf:Property; rdfs:label "UnderexcitationLimiterDynamics"@en; rdfs:comment "Underexcitation limiter model using this remote input signal."; rdfs:domain ; rdfs:range ; ; ; "Yes" . a rdf:Property; rdfs:label "RemoteInputSignal"@en; rdfs:comment "Remote input signal used by this power factor or VAr controller type 1 model."; rdfs:domain ; rdfs:range ; ; ; "No" . a rdf:Property; rdfs:label "PFVArControllerType1Dynamics"@en; rdfs:comment "Power factor or VAr controller type 1 model using this remote input signal."; rdfs:domain ; rdfs:range ; ; ; "Yes" . a rdf:Property; rdfs:label "RemoteInputSignal"@en; rdfs:comment "Remote input signal used by this voltage compensator model."; rdfs:domain ; rdfs:range ; ; ; "No" . a rdf:Property; rdfs:label "VoltageCompensatorDynamics"@en; rdfs:comment "Voltage compensator model using this remote input signal."; rdfs:domain ; rdfs:range ; ; ; "Yes" . a rdf:Property; rdfs:label "WindPlantDynamics"@en; rdfs:comment "The wind plant using the remote signal."; rdfs:domain ; rdfs:range ; ; ; "No" . a rdf:Property; rdfs:label "RemoteInputSignal"@en; rdfs:comment "The remote signal with which this power plant is associated."; rdfs:domain ; rdfs:range ; ; ; "Yes" . a rdf:Property; rdfs:label "WindTurbineType3or4Dynamics"@en; rdfs:comment "Wind turbine type 3 or type 4 models using this remote input signal."; rdfs:domain ; rdfs:range ; ; ; "No" . a rdf:Property; rdfs:label "RemoteInputSignal"@en; rdfs:comment "Remote input signal used by these wind turbine type 3 or type 4 models."; rdfs:domain ; rdfs:range ; ; ; "Yes" . a ; rdfs:label "StandardModels"@en; rdfs:comment """This subclause contains standard dynamic model specifications grouped into packages by standard function block (type of equipment being modelled). In the CIM, standard dynamic models are expressed by means of a class named with the standard model name and attributes reflecting each of the parameters necessary to describe the behaviour of an instance of the standard model.""" . a rdfs:Class; rdfs:label "DynamicsFunctionBlock"@en; rdfs:subClassOf ; rdfs:comment "Abstract parent class for all Dynamics function blocks."; . a rdf:Property; ; rdfs:label "enabled"@en; rdfs:domain ; ; ; rdfs:comment """Function block used indicator. true = use of function block is enabled false = use of function block is disabled.""" . a rdfs:Class; rdfs:label "RotatingMachineDynamics"@en; rdfs:subClassOf ; rdfs:comment "Abstract parent class for all synchronous and asynchronous machine standard models."; . a rdf:Property; ; rdfs:label "damping"@en; rdfs:domain ; ; ; rdfs:comment "Damping torque coefficient (D) (>= 0). A proportionality constant that, when multiplied by the angular velocity of the rotor poles with respect to the magnetic field (frequency), results in the damping torque. This value is often zero when the sources of damping torques (generator damper windings, load damping effects, etc.) are modelled in detail. Typical value = 0." . a rdf:Property; ; rdfs:label "inertia"@en; rdfs:domain ; ; ; rdfs:comment "Inertia constant of generator or motor and mechanical load (H) (> 0). This is the specification for the stored energy in the rotating mass when operating at rated speed. For a generator, this includes the generator plus all other elements (turbine, exciter) on the same shaft and has units of MW x s. For a motor, it includes the motor plus its mechanical load. Conventional units are PU on the generator MVA base, usually expressed as MW x s / MVA or just s. This value is used in the accelerating power reference frame for operator training simulator solutions. Typical value = 3." . a rdf:Property; ; rdfs:label "saturationFactor"@en; rdfs:domain ; ; ; rdfs:comment "Saturation factor at rated terminal voltage (S1) (>= 0). Not used by simplified model. Defined by defined by S(E1) in the SynchronousMachineSaturationParameters diagram. Typical value = 0,02." . a rdf:Property; ; rdfs:label "saturationFactor120"@en; rdfs:domain ; ; ; rdfs:comment "Saturation factor at 120% of rated terminal voltage (S12) (>= RotatingMachineDynamics.saturationFactor). Not used by the simplified model, defined by S(E2) in the SynchronousMachineSaturationParameters diagram. Typical value = 0,12." . a rdf:Property; ; rdfs:label "statorLeakageReactance"@en; rdfs:domain ; ; ; rdfs:comment "Stator leakage reactance (Xl) (>= 0). Typical value = 0,15." . a rdf:Property; ; rdfs:label "statorResistance"@en; rdfs:domain ; ; ; rdfs:comment "Stator (armature) resistance (Rs) (>= 0). Typical value = 0,005." . a ; rdfs:label "UserDefinedModels"@en; rdfs:comment """This subclause contains user-defined dynamic model classes to support the exchange of both proprietary and explicitly defined user-defined models. Proprietary models represent behaviour which, while not defined by a standard model class, is mutually understood by the sending and receiving applications based on the name passed in the .name attribute of the appropriate xxxUserDefined class. Proprietary model parameters are passed as general attributes using as many instances of the ProprietaryParameterDynamics class as there are parameters. Explicitly defined models describe dynamic behaviour in detail in terms of control blocks and their input and output signals. Note that the classes to support explicitly defined modelling are not currently defined - it is future work intended to also be supported by the family of xxxUserDefined classes. Both types of user-defined models use the family of xxxUserDefined classes, which allow a user-defined model to be used: - as the model for an individual standard function block (such as a turbine-governor or power system stabilizer) in a standard interconnection model whose other function blocks could be either standard or user-defined. For an illustration of this form of usage for a proprietary model, see the ExampleFunctionBlockProprietaryModel diagram in subclause 5.5. - as the complete representation of a dynamic behaviour model (for an entire synchronous machine, for example) where standard function blocks and standard interconnections are not used at all. For an illustration of this form of usage for a proprietary model, see the ExampleCompleteProprietaryModel diagram in subclause 5.5.""" . a rdfs:Class; rdfs:label "CSCUserDefined"@en; rdfs:subClassOf ; rdfs:comment "Current source converter (CSC) function block whose dynamic behaviour is described by a user-defined model."; ; . a rdf:Property; ; rdfs:label "proprietary"@en; rdfs:domain ; ; ; rdfs:comment """Behaviour is based on a proprietary model as opposed to a detailed model. true = user-defined model is proprietary with behaviour mutually understood by sending and receiving applications and parameters passed as general attributes false = user-defined model is explicitly defined in terms of control blocks and their input and output signals.""" . a rdf:Property; rdfs:label "ProprietaryParameterDynamics"@en; rdfs:comment "Parameter of this proprietary user-defined model."; rdfs:domain ; rdfs:range ; ; ; "No" . a rdf:Property; rdfs:label "CSCUserDefined"@en; rdfs:comment "Proprietary user-defined model with which this parameter is associated."; rdfs:domain ; rdfs:range ; ; ; "Yes" . a rdfs:Class; rdfs:label "SVCUserDefined"@en; rdfs:subClassOf ; rdfs:comment "Static var compensator (SVC) function block whose dynamic behaviour is described by a user-defined model."; ; . a rdf:Property; ; rdfs:label "proprietary"@en; rdfs:domain ; ; ; rdfs:comment """Behaviour is based on a proprietary model as opposed to a detailed model. true = user-defined model is proprietary with behaviour mutually understood by sending and receiving applications and parameters passed as general attributes false = user-defined model is explicitly defined in terms of control blocks and their input and output signals.""" . a rdf:Property; rdfs:label "ProprietaryParameterDynamics"@en; rdfs:comment "Parameter of this proprietary user-defined model."; rdfs:domain ; rdfs:range ; ; ; "No" . a rdf:Property; rdfs:label "SVCUserDefined"@en; rdfs:comment "Proprietary user-defined model with which this parameter is associated."; rdfs:domain ; rdfs:range ; ; ; "Yes" . a rdfs:Class; rdfs:label "VSCUserDefined"@en; rdfs:subClassOf ; rdfs:comment "Voltage source converter (VSC) function block whose dynamic behaviour is described by a user-defined model."; ; . a rdf:Property; ; rdfs:label "proprietary"@en; rdfs:domain ; ; ; rdfs:comment """Behaviour is based on a proprietary model as opposed to a detailed model. true = user-defined model is proprietary with behaviour mutually understood by sending and receiving applications and parameters passed as general attributes false = user-defined model is explicitly defined in terms of control blocks and their input and output signals.""" . a rdf:Property; rdfs:label "ProprietaryParameterDynamics"@en; rdfs:comment "Parameter of this proprietary user-defined model."; rdfs:domain ; rdfs:range ; ; ; "No" . a rdf:Property; rdfs:label "VSCUserDefined"@en; rdfs:comment "Proprietary user-defined model with which this parameter is associated."; rdfs:domain ; rdfs:range ; ; ; "Yes" . a rdfs:Class; rdfs:label "WindPlantUserDefined"@en; rdfs:subClassOf ; rdfs:comment "Wind plant function block whose dynamic behaviour is described by a user-defined model."; ; . a rdf:Property; ; rdfs:label "proprietary"@en; rdfs:domain ; ; ; rdfs:comment """Behaviour is based on a proprietary model as opposed to a detailed model. true = user-defined model is proprietary with behaviour mutually understood by sending and receiving applications and parameters passed as general attributes false = user-defined model is explicitly defined in terms of control blocks and their input and output signals.""" . a rdf:Property; rdfs:label "ProprietaryParameterDynamics"@en; rdfs:comment "Parameter of this proprietary user-defined model."; rdfs:domain ; rdfs:range ; ; ; "No" . a rdf:Property; rdfs:label "WindPlantUserDefined"@en; rdfs:comment "Proprietary user-defined model with which this parameter is associated."; rdfs:domain ; rdfs:range ; ; ; "Yes" . a rdfs:Class; rdfs:label "WindType1or2UserDefined"@en; rdfs:subClassOf ; rdfs:comment "Wind type 1 or type 2 function block whose dynamic behaviour is described by a user-defined model."; ; . a rdf:Property; ; rdfs:label "proprietary"@en; rdfs:domain ; ; ; rdfs:comment """Behaviour is based on a proprietary model as opposed to a detailed model. true = user-defined model is proprietary with behaviour mutually understood by sending and receiving applications and parameters passed as general attributes false = user-defined model is explicitly defined in terms of control blocks and their input and output signals.""" . a rdf:Property; rdfs:label "ProprietaryParameterDynamics"@en; rdfs:comment "Parameter of this proprietary user-defined model."; rdfs:domain ; rdfs:range ; ; ; "No" . a rdf:Property; rdfs:label "WindType1or2UserDefined"@en; rdfs:comment "Proprietary user-defined model with which this parameter is associated."; rdfs:domain ; rdfs:range ; ; ; "Yes" . a rdfs:Class; rdfs:label "WindType3or4UserDefined"@en; rdfs:subClassOf ; rdfs:comment "Wind type 3 or type 4 function block whose dynamic behaviour is described by a user-defined model."; ; . a rdf:Property; ; rdfs:label "proprietary"@en; rdfs:domain ; ; ; rdfs:comment """Behaviour is based on a proprietary model as opposed to a detailed model. true = user-defined model is proprietary with behaviour mutually understood by sending and receiving applications and parameters passed as general attributes false = user-defined model is explicitly defined in terms of control blocks and their input and output signals.""" . a rdf:Property; rdfs:label "ProprietaryParameterDynamics"@en; rdfs:comment "Parameter of this proprietary user-defined model."; rdfs:domain ; rdfs:range ; ; ; "No" . a rdf:Property; rdfs:label "WindType3or4UserDefined"@en; rdfs:comment "Proprietary user-defined model with which this parameter is associated."; rdfs:domain ; rdfs:range ; ; ; "Yes" . a rdfs:Class; rdfs:label "SynchronousMachineUserDefined"@en; rdfs:subClassOf ; rdfs:comment "Synchronous machine whose dynamic behaviour is described by a user-defined model."; ; . a rdf:Property; ; rdfs:label "proprietary"@en; rdfs:domain ; ; ; rdfs:comment """Behaviour is based on a proprietary model as opposed to a detailed model. true = user-defined model is proprietary with behaviour mutually understood by sending and receiving applications and parameters passed as general attributes false = user-defined model is explicitly defined in terms of control blocks and their input and output signals.""" . a rdf:Property; rdfs:label "SynchronousMachineUserDefined"@en; rdfs:comment "Proprietary user-defined model with which this parameter is associated."; rdfs:domain ; rdfs:range ; ; ; "Yes" . a rdf:Property; rdfs:label "ProprietaryParameterDynamics"@en; rdfs:comment "Parameter of this proprietary user-defined model."; rdfs:domain ; rdfs:range ; ; ; "No" . a rdfs:Class; rdfs:label "AsynchronousMachineUserDefined"@en; rdfs:subClassOf ; rdfs:comment "Asynchronous machine whose dynamic behaviour is described by a user-defined model."; ; . a rdf:Property; ; rdfs:label "proprietary"@en; rdfs:domain ; ; ; rdfs:comment """Behaviour is based on a proprietary model as opposed to a detailed model. true = user-defined model is proprietary with behaviour mutually understood by sending and receiving applications and parameters passed as general attributes false = user-defined model is explicitly defined in terms of control blocks and their input and output signals.""" . a rdf:Property; rdfs:label "AsynchronousMachineUserDefined"@en; rdfs:comment "Proprietary user-defined model with which this parameter is associated."; rdfs:domain ; rdfs:range ; ; ; "Yes" . a rdf:Property; rdfs:label "ProprietaryParameterDynamics"@en; rdfs:comment "Parameter of this proprietary user-defined model."; rdfs:domain ; rdfs:range ; ; ; "No" . a rdfs:Class; rdfs:label "TurbineGovernorUserDefined"@en; rdfs:subClassOf ; rdfs:comment "Turbine-governor function block whose dynamic behaviour is described by a user-defined model."; ; . a rdf:Property; ; rdfs:label "proprietary"@en; rdfs:domain ; ; ; rdfs:comment """Behaviour is based on a proprietary model as opposed to a detailed model. true = user-defined model is proprietary with behaviour mutually understood by sending and receiving applications and parameters passed as general attributes false = user-defined model is explicitly defined in terms of control blocks and their input and output signals.""" . a rdf:Property; rdfs:label "TurbineGovernorUserDefined"@en; rdfs:comment "Proprietary user-defined model with which this parameter is associated."; rdfs:domain ; rdfs:range ; ; ; "Yes" . a rdf:Property; rdfs:label "ProprietaryParameterDynamics"@en; rdfs:comment "Parameter of this proprietary user-defined model."; rdfs:domain ; rdfs:range ; ; ; "No" . a rdfs:Class; rdfs:label "TurbineLoadControllerUserDefined"@en; rdfs:subClassOf ; rdfs:comment "Turbine load controller function block whose dynamic behaviour is described by a user-defined model."; ; . a rdf:Property; ; rdfs:label "proprietary"@en; rdfs:domain ; ; ; rdfs:comment """Behaviour is based on a proprietary model as opposed to a detailed model. true = user-defined model is proprietary with behaviour mutually understood by sending and receiving applications and parameters passed as general attributes false = user-defined model is explicitly defined in terms of control blocks and their input and output signals.""" . a rdf:Property; rdfs:label "TurbineLoadControllerUserDefined"@en; rdfs:comment "Proprietary user-defined model with which this parameter is associated."; rdfs:domain ; rdfs:range ; ; ; "Yes" . a rdf:Property; rdfs:label "ProprietaryParameterDynamics"@en; rdfs:comment "Parameter of this proprietary user-defined model."; rdfs:domain ; rdfs:range ; ; ; "No" . a rdfs:Class; rdfs:label "MechanicalLoadUserDefined"@en; rdfs:subClassOf ; rdfs:comment "Mechanical load function block whose dynamic behaviour is described by a user-defined model."; ; . a rdf:Property; ; rdfs:label "proprietary"@en; rdfs:domain ; ; ; rdfs:comment """Behaviour is based on a proprietary model as opposed to a detailed model. true = user-defined model is proprietary with behaviour mutually understood by sending and receiving applications and parameters passed as general attributes false = user-defined model is explicitly defined in terms of control blocks and their input and output signals.""" . a rdf:Property; rdfs:label "MechanicalLoadUserDefined"@en; rdfs:comment "Proprietary user-defined model with which this parameter is associated."; rdfs:domain ; rdfs:range ; ; ; "Yes" . a rdf:Property; rdfs:label "ProprietaryParameterDynamics"@en; rdfs:comment "Parameter of this proprietary user-defined model."; rdfs:domain ; rdfs:range ; ; ; "No" . a rdfs:Class; rdfs:label "ExcitationSystemUserDefined"@en; rdfs:subClassOf ; rdfs:comment "Excitation system function block whose dynamic behaviour is described by a user-defined model."; ; . a rdf:Property; ; rdfs:label "proprietary"@en; rdfs:domain ; ; ; rdfs:comment """Behaviour is based on a proprietary model as opposed to a detailed model. true = user-defined model is proprietary with behaviour mutually understood by sending and receiving applications and parameters passed as general attributes false = user-defined model is explicitly defined in terms of control blocks and their input and output signals.""" . a rdf:Property; rdfs:label "ExcitationSystemUserDefined"@en; rdfs:comment "Proprietary user-defined model with which this parameter is associated."; rdfs:domain ; rdfs:range ; ; ; "Yes" . a rdf:Property; rdfs:label "ProprietaryParameterDynamics"@en; rdfs:comment "Parameter of this proprietary user-defined model."; rdfs:domain ; rdfs:range ; ; ; "No" . a rdfs:Class; rdfs:label "OverexcitationLimiterUserDefined"@en; rdfs:subClassOf ; rdfs:comment "Overexcitation limiter system function block whose dynamic behaviour is described by a user-defined model."; ; . a rdf:Property; ; rdfs:label "proprietary"@en; rdfs:domain ; ; ; rdfs:comment """Behaviour is based on a proprietary model as opposed to a detailed model. true = user-defined model is proprietary with behaviour mutually understood by sending and receiving applications and parameters passed as general attributes false = user-defined model is explicitly defined in terms of control blocks and their input and output signals.""" . a rdf:Property; rdfs:label "OverexcitationLimiterUserDefined"@en; rdfs:comment "Proprietary user-defined model with which this parameter is associated."; rdfs:domain ; rdfs:range ; ; ; "Yes" . a rdf:Property; rdfs:label "ProprietaryParameterDynamics"@en; rdfs:comment "Parameter of this proprietary user-defined model."; rdfs:domain ; rdfs:range ; ; ; "No" . a rdfs:Class; rdfs:label "UnderexcitationLimiterUserDefined"@en; rdfs:subClassOf ; rdfs:comment "Underexcitation limiter function block whose dynamic behaviour is described by a user-defined model."; ; . a rdf:Property; ; rdfs:label "proprietary"@en; rdfs:domain ; ; ; rdfs:comment """Behaviour is based on a proprietary model as opposed to a detailed model. true = user-defined model is proprietary with behaviour mutually understood by sending and receiving applications and parameters passed as general attributes false = user-defined model is explicitly defined in terms of control blocks and their input and output signals.""" . a rdf:Property; rdfs:label "UnderexcitationLimiterUserDefined"@en; rdfs:comment "Proprietary user-defined model with which this parameter is associated."; rdfs:domain ; rdfs:range ; ; ; "Yes" . a rdf:Property; rdfs:label "ProprietaryParameterDynamics"@en; rdfs:comment "Parameter of this proprietary user-defined model."; rdfs:domain ; rdfs:range ; ; ; "No" . a rdfs:Class; rdfs:label "PowerSystemStabilizerUserDefined"@en; rdfs:subClassOf ; rdfs:comment "Power system stabilizer function block whose dynamic behaviour is described by a user-defined model."; ; . a rdf:Property; ; rdfs:label "proprietary"@en; rdfs:domain ; ; ; rdfs:comment """Behaviour is based on a proprietary model as opposed to a detailed model. true = user-defined model is proprietary with behaviour mutually understood by sending and receiving applications and parameters passed as general attributes false = user-defined model is explicitly defined in terms of control blocks and their input and output signals.""" . a rdf:Property; rdfs:label "PowerSystemStabilizerUserDefined"@en; rdfs:comment "Proprietary user-defined model with which this parameter is associated."; rdfs:domain ; rdfs:range ; ; ; "Yes" . a rdf:Property; rdfs:label "ProprietaryParameterDynamics"@en; rdfs:comment "Parameter of this proprietary user-defined model."; rdfs:domain ; rdfs:range ; ; ; "No" . a rdfs:Class; rdfs:label "DiscontinuousExcitationControlUserDefined"@en; rdfs:subClassOf ; rdfs:comment "Discontinuous excitation control function block whose dynamic behaviour is described by a user-defined model."; ; . a rdf:Property; ; rdfs:label "proprietary"@en; rdfs:domain ; ; ; rdfs:comment """Behaviour is based on a proprietary model as opposed to a detailed model. true = user-defined model is proprietary with behaviour mutually understood by sending and receiving applications and parameters passed as general attributes false = user-defined model is explicitly defined in terms of control blocks and their input and output signals.""" . a rdf:Property; rdfs:label "DiscontinuousExcitationControlUserDefined"@en; rdfs:comment "Proprietary user-defined model with which this parameter is associated."; rdfs:domain ; rdfs:range ; ; ; "Yes" . a rdf:Property; rdfs:label "ProprietaryParameterDynamics"@en; rdfs:comment "Parameter of this proprietary user-defined model."; rdfs:domain ; rdfs:range ; ; ; "No" . a rdfs:Class; rdfs:label "PFVArControllerType1UserDefined"@en; rdfs:subClassOf ; rdfs:comment "Power factor or VAr controller type 1 function block whose dynamic behaviour is described by a user-defined model."; ; . a rdf:Property; ; rdfs:label "proprietary"@en; rdfs:domain ; ; ; rdfs:comment """Behaviour is based on a proprietary model as opposed to a detailed model. true = user-defined model is proprietary with behaviour mutually understood by sending and receiving applications and parameters passed as general attributes false = user-defined model is explicitly defined in terms of control blocks and their input and output signals.""" . a rdf:Property; rdfs:label "PFVArControllerType1UserDefined"@en; rdfs:comment "Proprietary user-defined model with which this parameter is associated."; rdfs:domain ; rdfs:range ; ; ; "Yes" . a rdf:Property; rdfs:label "ProprietaryParameterDynamics"@en; rdfs:comment "Parameter of this proprietary user-defined model."; rdfs:domain ; rdfs:range ; ; ; "No" . a rdfs:Class; rdfs:label "VoltageAdjusterUserDefined"@en; rdfs:subClassOf ; rdfs:comment "Voltage adjuster function block whose dynamic behaviour is described by a user-defined model."; ; . a rdf:Property; ; rdfs:label "proprietary"@en; rdfs:domain ; ; ; rdfs:comment """Behaviour is based on a proprietary model as opposed to a detailed model. true = user-defined model is proprietary with behaviour mutually understood by sending and receiving applications and parameters passed as general attributes false = user-defined model is explicitly defined in terms of control blocks and their input and output signals.""" . a rdf:Property; rdfs:label "VoltageAdjusterUserDefined"@en; rdfs:comment "Proprietary user-defined model with which this parameter is associated."; rdfs:domain ; rdfs:range ; ; ; "Yes" . a rdf:Property; rdfs:label "ProprietaryParameterDynamics"@en; rdfs:comment "Parameter of this proprietary user-defined model."; rdfs:domain ; rdfs:range ; ; ; "No" . a rdfs:Class; rdfs:label "PFVArControllerType2UserDefined"@en; rdfs:subClassOf ; rdfs:comment "Power factor or VAr controller type 2 function block whose dynamic behaviour is described by a user-defined model."; ; . a rdf:Property; ; rdfs:label "proprietary"@en; rdfs:domain ; ; ; rdfs:comment """Behaviour is based on a proprietary model as opposed to a detailed model. true = user-defined model is proprietary with behaviour mutually understood by sending and receiving applications and parameters passed as general attributes false = user-defined model is explicitly defined in terms of control blocks and their input and output signals.""" . a rdf:Property; rdfs:label "PFVArControllerType2UserDefined"@en; rdfs:comment "Proprietary user-defined model with which this parameter is associated."; rdfs:domain ; rdfs:range ; ; ; "Yes" . a rdf:Property; rdfs:label "ProprietaryParameterDynamics"@en; rdfs:comment "Parameter of this proprietary user-defined model."; rdfs:domain ; rdfs:range ; ; ; "No" . a rdfs:Class; rdfs:label "VoltageCompensatorUserDefined"@en; rdfs:subClassOf ; rdfs:comment "Voltage compensator function block whose dynamic behaviour is described by a user-defined model."; ; . a rdf:Property; ; rdfs:label "proprietary"@en; rdfs:domain ; ; ; rdfs:comment """Behaviour is based on a proprietary model as opposed to a detailed model. true = user-defined model is proprietary with behaviour mutually understood by sending and receiving applications and parameters passed as general attributes false = user-defined model is explicitly defined in terms of control blocks and their input and output signals.""" . a rdf:Property; rdfs:label "VoltageCompensatorUserDefined"@en; rdfs:comment "Proprietary user-defined model with which this parameter is associated."; rdfs:domain ; rdfs:range ; ; ; "Yes" . a rdf:Property; rdfs:label "ProprietaryParameterDynamics"@en; rdfs:comment "Parameter of this proprietary user-defined model."; rdfs:domain ; rdfs:range ; ; ; "No" . a rdfs:Class; rdfs:label "LoadUserDefined"@en; rdfs:subClassOf ; rdfs:comment "Load whose dynamic behaviour is described by a user-defined model."; ; . a rdf:Property; ; rdfs:label "proprietary"@en; rdfs:domain ; ; ; rdfs:comment """Behaviour is based on a proprietary model as opposed to a detailed model. true = user-defined model is proprietary with behaviour mutually understood by sending and receiving applications and parameters passed as general attributes false = user-defined model is explicitly defined in terms of control blocks and their input and output signals.""" . a rdf:Property; rdfs:label "LoadUserDefined"@en; rdfs:comment "Proprietary user-defined model with which this parameter is associated."; rdfs:domain ; rdfs:range ; ; ; "Yes" . a rdf:Property; rdfs:label "ProprietaryParameterDynamics"@en; rdfs:comment "Parameter of this proprietary user-defined model."; rdfs:domain ; rdfs:range ; ; ; "No" . a rdfs:Class; rdfs:label "ProprietaryParameterDynamics"@en; rdfs:comment """Supports definition of one or more parameters of several different datatypes for use by proprietary user-defined models. This class does not inherit from IdentifiedObject since it is not intended that a single instance of it be referenced by more than one proprietary user-defined model instance."""; ; . a rdf:Property; ; rdfs:label "parameterNumber"@en; rdfs:domain ; ; ; rdfs:comment "Sequence number of the parameter among the set of parameters associated with the related proprietary user-defined model." . a rdf:Property; ; rdfs:label "booleanParameterValue"@en; rdfs:domain ; ; ; rdfs:comment "Boolean parameter value. If this attribute is populated, integerParameterValue and floatParameterValue will not be." . a rdf:Property; ; rdfs:label "integerParameterValue"@en; rdfs:domain ; ; ; rdfs:comment "Integer parameter value. If this attribute is populated, booleanParameterValue and floatParameterValue will not be." . a rdf:Property; ; rdfs:label "floatParameterValue"@en; rdfs:domain ; ; ; rdfs:comment "Floating point parameter value. If this attribute is populated, booleanParameterValue and integerParameterValue will not be." . a ; rdfs:label "SynchronousMachineDynamics"@en; rdfs:comment """For conventional power generating units (e.g., thermal, hydro, combustion turbine), a synchronous machine model represents the electrical characteristics of the generator and the mechanical characteristics of the turbine-generator rotational inertia. Large industrial motors or groups of similar motors can be represented by individual motor models which are represented as generators with negative active power in the static (power flow) data. The interconnection with the electrical network equations can differ among simulation tools. The tool only needs to know the synchronous machine to establish the correct interconnection. The interconnection with the motor’s equipment could also differ due to input and output signals required by standard models.""" . a rdfs:Class; rdfs:label "SynchronousMachineSimplified"@en; rdfs:subClassOf ; rdfs:comment """The simplified model represents a synchronous generator as a constant internal voltage behind an impedance (Rs + jXp) as shown in the Simplified diagram. Since internal voltage is held constant, there is no Efd input and any excitation system model will be ignored. There is also no Ifd output. This model should not be used for representing a real generator except, perhaps, small generators whose response is insignificant. The parameters used for the simplified model include: - RotatingMachineDynamics.damping (D); - RotatingMachineDynamics.inertia (H); - RotatingMachineDynamics.statorLeakageReactance (used to exchange jXp for SynchronousMachineSimplified); - RotatingMachineDynamics.statorResistance (Rs)."""; ; . a rdfs:Class; rdfs:label "SynchronousMachineDynamics"@en; rdfs:subClassOf ; rdfs:comment """Synchronous machine whose behaviour is described by reference to a standard model expressed in one of the following forms: - simplified (or classical), where a group of generators or motors is not modelled in detail; - detailed, in equivalent circuit form; - detailed, in time constant reactance form; or - by definition of a user-defined model. It is a common practice to represent small generators by a negative load rather than by a dynamic generator model when performing dynamics simulations. In this case, a SynchronousMachine in the static model is not represented by anything in the dynamics model, instead it is treated as an ordinary load. Parameter details:
  1. Synchronous machine parameters such as Xl, Xd, Xp etc. are actually used as inductances in the models, but are commonly referred to as reactances since, at nominal frequency, the PU values are the same. However, some references use the symbol L instead of X.
"""; . a rdf:Property; rdfs:label "HighPressureSynchronousMachineDynamics"@en; rdfs:comment "High-pressure synchronous machine with which this cross-compound turbine governor is associated. "; rdfs:domain ; rdfs:range ; ; ; "Yes" . a rdf:Property; rdfs:label "CrossCompoundTurbineGovernorDyanmics"@en; rdfs:comment "The cross-compound turbine governor with which this high-pressure synchronous machine is associated."; rdfs:domain ; rdfs:range ; ; ; "No" . a rdf:Property; rdfs:label "LowPressureSynchronousMachineDynamics"@en; rdfs:comment "Low-pressure synchronous machine with which this cross-compound turbine governor is associated. "; rdfs:domain ; rdfs:range ; ; ; "Yes" . a rdf:Property; rdfs:label "CrossCompoundTurbineGovernorDynamics"@en; rdfs:comment "The cross-compound turbine governor with which this low-pressure synchronous machine is associated."; rdfs:domain ; rdfs:range ; ; ; "No" . a rdf:Property; rdfs:label "SynchronousMachineDynamics"@en; rdfs:comment "Synchronous machine model with which this mechanical load model is associated. MechanicalLoadDynamics shall have either an association to SynchronousMachineDynamics or AsynchronousMachineDyanmics."; rdfs:domain ; rdfs:range ; ; ; "Yes" . a rdf:Property; rdfs:label "MechanicalLoadDynamics"@en; rdfs:comment "Mechanical load model associated with this synchronous machine model."; rdfs:domain ; rdfs:range ; ; ; "No" . a rdf:Property; rdfs:label "SynchronousMachineDynamics"@en; rdfs:comment "Synchronous machine model with which this excitation system model is associated."; rdfs:domain ; rdfs:range ; ; ; "Yes" . a rdf:Property; rdfs:label "ExcitationSystemDynamics"@en; rdfs:comment "Excitation system model associated with this synchronous machine model."; rdfs:domain ; rdfs:range ; ; ; "No" . a rdf:Property; rdfs:label "SynchronousMachineDynamics"@en; rdfs:comment "Synchronous machine model with which this turbine-governor model is associated. TurbineGovernorDynamics shall have either an association to SynchronousMachineDynamics or to AsynchronousMachineDynamics."; rdfs:domain ; rdfs:range ; ; ; "Yes" . a rdf:Property; rdfs:label "TurbineGovernorDynamics"@en; rdfs:comment "Turbine-governor model associated with this synchronous machine model. Multiplicity of greater than one is intended to support hydro units that have multiple turbines on one generator."; rdfs:domain ; rdfs:range ; ; ; "No" . a rdf:Property; rdfs:label "SynchronousMachineDynamics"@en; rdfs:comment "Standard synchronous machine out of which current flow is being compensated for."; rdfs:domain ; rdfs:range ; ; ; "Yes" . a rdf:Property; rdfs:label "GenICompensationForGenJ"@en; rdfs:comment "Compensation of voltage compensator's generator for current flow out of this generator."; rdfs:domain ; rdfs:range ; ; ; "No" . a rdfs:Class; rdfs:label "SynchronousMachineDetailed"@en; rdfs:subClassOf ; rdfs:comment """All synchronous machine detailed types use a subset of the same data parameters and input/output variables. The several variations differ in the following ways: - the number of equivalent windings that are included; - the way in which saturation is incorporated into the model; - whether or not “subtransient saliency” (X''q not = X''d) is represented. It is not necessary for each simulation tool to have separate models for each of the model types. The same model can often be used for several types by alternative logic within the model. Also, differences in saturation representation might not result in significant model performance differences so model substitutions are often acceptable. """; . a rdf:Property; ; rdfs:label "saturationFactorQAxis"@en; rdfs:domain ; ; ; rdfs:comment "Quadrature-axis saturation factor at rated terminal voltage (S1q) (>= 0). Typical value = 0,02." . a rdf:Property; ; rdfs:label "saturationFactor120QAxis"@en; rdfs:domain ; ; ; rdfs:comment "Quadrature-axis saturation factor at 120% of rated terminal voltage (S12q) (>= SynchonousMachineDetailed.saturationFactorQAxis). Typical value = 0,12." . a rdf:Property; ; rdfs:label "efdBaseRatio"@en; rdfs:domain ; ; ; rdfs:comment "Ratio (exciter voltage/generator voltage) of Efd bases of exciter and generator models (> 0). Typical value = 1." . a rdf:Property; ; rdfs:label "ifdBaseType"@en; rdfs:domain ; rdfs:range ; ; rdfs:comment "Excitation base system mode. It should be equal to the value of WLMDV given by the user. WLMDV is the PU ratio between the field voltage and the excitation current: Efd = WLMDV x Ifd. Typical value = ifag." . a rdfs:Class; rdfs:label "SynchronousMachineTimeConstantReactance"@en; rdfs:subClassOf ; rdfs:comment """Synchronous machine detailed modelling types are defined by the combination of the attributes SynchronousMachineTimeConstantReactance.modelType and SynchronousMachineTimeConstantReactance.rotorType. Parameter details:
  1. The “p” in the time-related attribute names is a substitution for a “prime” in the usual parameter notation, e.g. tpdo refers to T'do.
  2. The parameters used for models expressed in time constant reactance form include:
- RotatingMachine.ratedS (MVAbase); - RotatingMachineDynamics.damping (D); - RotatingMachineDynamics.inertia (H); - RotatingMachineDynamics.saturationFactor (S1); - RotatingMachineDynamics.saturationFactor120 (S12); - RotatingMachineDynamics.statorLeakageReactance (Xl); - RotatingMachineDynamics.statorResistance (Rs); - SynchronousMachineTimeConstantReactance.ks (Ks); - SynchronousMachineDetailed.saturationFactorQAxis (S1q); - SynchronousMachineDetailed.saturationFactor120QAxis (S12q); - SynchronousMachineDetailed.efdBaseRatio; - SynchronousMachineDetailed.ifdBaseType; - .xDirectSync (Xd); - .xDirectTrans (X'd); - .xDirectSubtrans (X''d); - .xQuadSync (Xq); - .xQuadTrans (X'q); - .xQuadSubtrans (X''q); - .tpdo (T'do); - .tppdo (T''do); - .tpqo (T'qo); - .tppqo (T''qo); - .tc."""; ; . a rdf:Property; ; rdfs:label "rotorType"@en; rdfs:domain ; rdfs:range ; ; rdfs:comment "Type of rotor on physical machine." . a rdf:Property; ; rdfs:label "modelType"@en; rdfs:domain ; rdfs:range ; ; rdfs:comment "Type of synchronous machine model used in dynamic simulation applications." . a rdf:Property; ; rdfs:label "ks"@en; rdfs:domain ; ; ; rdfs:comment "Saturation loading correction factor (Ks) (>= 0). Used only by type J model. Typical value = 0." . a rdf:Property; ; rdfs:label "xDirectSync"@en; rdfs:domain ; ; ; rdfs:comment "Direct-axis synchronous reactance (Xd) (>= SynchronousMachineTimeConstantReactance.xDirectTrans). The quotient of a sustained value of that AC component of armature voltage that is produced by the total direct-axis flux due to direct-axis armature current and the value of the AC component of this current, the machine running at rated speed. Typical value = 1,8." . a rdf:Property; ; rdfs:label "xDirectTrans"@en; rdfs:domain ; ; ; rdfs:comment "Direct-axis transient reactance (unsaturated) (X'd) (>= SynchronousMachineTimeConstantReactance.xDirectSubtrans). Typical value = 0,5." . a rdf:Property; ; rdfs:label "xDirectSubtrans"@en; rdfs:domain ; ; ; rdfs:comment "Direct-axis subtransient reactance (unsaturated) (X''d) (> RotatingMachineDynamics.statorLeakageReactance). Typical value = 0,2." . a rdf:Property; ; rdfs:label "xQuadSync"@en; rdfs:domain ; ; ; rdfs:comment """Quadrature-axis synchronous reactance (Xq) (>= SynchronousMachineTimeConstantReactance.xQuadTrans). The ratio of the component of reactive armature voltage, due to the quadrature-axis component of armature current, to this component of current, under steady state conditions and at rated frequency. Typical value = 1,6.""" . a rdf:Property; ; rdfs:label "xQuadTrans"@en; rdfs:domain ; ; ; rdfs:comment "Quadrature-axis transient reactance (X'q) (>= SynchronousMachineTimeConstantReactance.xQuadSubtrans). Typical value = 0,3." . a rdf:Property; ; rdfs:label "xQuadSubtrans"@en; rdfs:domain ; ; ; rdfs:comment "Quadrature-axis subtransient reactance (X''q) (> RotatingMachineDynamics.statorLeakageReactance). Typical value = 0,2." . a rdf:Property; ; rdfs:label "tpdo"@en; rdfs:domain ; ; ; rdfs:comment "Direct-axis transient rotor time constant (T'do) (> SynchronousMachineTimeConstantReactance.tppdo). Typical value = 5." . a rdf:Property; ; rdfs:label "tppdo"@en; rdfs:domain ; ; ; rdfs:comment "Direct-axis subtransient rotor time constant (T''do) (> 0). Typical value = 0,03." . a rdf:Property; ; rdfs:label "tpqo"@en; rdfs:domain ; ; ; rdfs:comment "Quadrature-axis transient rotor time constant (T'qo) (> SynchronousMachineTimeConstantReactance.tppqo). Typical value = 0,5." . a rdf:Property; ; rdfs:label "tppqo"@en; rdfs:domain ; ; ; rdfs:comment "Quadrature-axis subtransient rotor time constant (T''qo) (> 0). Typical value = 0,03." . a rdf:Property; ; rdfs:label "tc"@en; rdfs:domain ; ; ; rdfs:comment "Damping time constant for “Canay” reactance (>= 0). Typical value = 0." . a rdfs:Class; rdfs:label "SynchronousMachineEquivalentCircuit"@en; rdfs:subClassOf ; rdfs:comment """The electrical equations for all variations of the synchronous models are based on the SynchronousEquivalentCircuit diagram for the direct- and quadrature- axes. Equations for conversion between equivalent circuit and time constant reactance forms: Xd = Xad + Xl X’d = Xl + Xad x Xfd / (Xad + Xfd) X”d = Xl + Xad x Xfd x X1d / (Xad x Xfd + Xad x X1d + Xfd x X1d) Xq = Xaq + Xl X’q = Xl + Xaq x X1q / (Xaq + X1q) X”q = Xl + Xaq x X1q x X2q / (Xaq x X1q + Xaq x X2q + X1q x X2q) T’do = (Xad + Xfd) / (omega0 x Rfd) T”do = (Xad x Xfd + Xad x X1d + Xfd x X1d) / (omega0 x R1d x (Xad + Xfd) T’qo = (Xaq + X1q) / (omega0 x R1q) T”qo = (Xaq x X1q + Xaq x X2q + X1q x X2q) / (omega0 x R2q x (Xaq + X1q) Same equations using CIM attributes from SynchronousMachineTimeConstantReactance class on left of \"=\" and SynchronousMachineEquivalentCircuit class on right (except as noted): xDirectSync = xad + RotatingMachineDynamics.statorLeakageReactance xDirectTrans = RotatingMachineDynamics.statorLeakageReactance + xad x xfd / (xad + xfd) xDirectSubtrans = RotatingMachineDynamics.statorLeakageReactance + xad x xfd x x1d / (xad x xfd + xad x x1d + xfd x x1d) xQuadSync = xaq + RotatingMachineDynamics.statorLeakageReactance xQuadTrans = RotatingMachineDynamics.statorLeakageReactance + xaq x x1q / (xaq+ x1q) xQuadSubtrans = RotatingMachineDynamics.statorLeakageReactance + xaq x x1q x x2q / (xaq x x1q + xaq x x2q + x1q x x2q) tpdo = (xad + xfd) / (2 x pi x nominal frequency x rfd) tppdo = (xad x xfd + xad x x1d + xfd x x1d) / (2 x pi x nominal frequency x r1d x (xad + xfd) tpqo = (xaq + x1q) / (2 x pi x nominal frequency x r1q) tppqo = (xaq x x1q + xaq x x2q + x1q x x2q) / (2 x pi x nominal frequency x r2q x (xaq + x1q) These are only valid for a simplified model where \"Canay\" reactance is zero."""; ; . a rdf:Property; ; rdfs:label "xad"@en; rdfs:domain ; ; ; rdfs:comment "Direct-axis mutual reactance." . a rdf:Property; ; rdfs:label "rfd"@en; rdfs:domain ; ; ; rdfs:comment "Field winding resistance." . a rdf:Property; ; rdfs:label "xfd"@en; rdfs:domain ; ; ; rdfs:comment "Field winding leakage reactance." . a rdf:Property; ; rdfs:label "r1d"@en; rdfs:domain ; ; ; rdfs:comment "Direct-axis damper 1 winding resistance." . a rdf:Property; ; rdfs:label "x1d"@en; rdfs:domain ; ; ; rdfs:comment "Direct-axis damper 1 winding leakage reactance." . a rdf:Property; ; rdfs:label "xf1d"@en; rdfs:domain ; ; ; rdfs:comment "Differential mutual (“Canay”) reactance." . a rdf:Property; ; rdfs:label "xaq"@en; rdfs:domain ; ; ; rdfs:comment "Quadrature-axis mutual reactance." . a rdf:Property; ; rdfs:label "r1q"@en; rdfs:domain ; ; ; rdfs:comment "Quadrature-axis damper 1 winding resistance." . a rdf:Property; ; rdfs:label "x1q"@en; rdfs:domain ; ; ; rdfs:comment "Quadrature-axis damper 1 winding leakage reactance." . a rdf:Property; ; rdfs:label "r2q"@en; rdfs:domain ; ; ; rdfs:comment "Quadrature-axis damper 2 winding resistance." . a rdf:Property; ; rdfs:label "x2q"@en; rdfs:domain ; ; ; rdfs:comment "Quadrature-axis damper 2 winding leakage reactance." . a ; rdfs:label "AsynchronousMachineDynamics"@en; rdfs:comment """An asynchronous machine model represents a (induction) generator or motor with no external connection to the rotor windings, e.g. a squirrel-cage induction machine. The interconnection with the electrical network equations can differ among simulation tools. The program only needs to know the terminal to which this asynchronous machine is connected in order to establish the correct interconnection. The interconnection with the motor’s equipment could also differ due to input and output signals required by standard models. The asynchronous machine model is used to model wind generators type 1 and type 2. For these, normal practice is to include the rotor flux transients and neglect the stator flux transients.""" . a rdfs:Class; rdfs:label "AsynchronousMachineDynamics"@en; rdfs:subClassOf ; rdfs:comment """Asynchronous machine whose behaviour is described by reference to a standard model expressed in either time constant reactance form or equivalent circuit form or by definition of a user-defined model. Parameter details:
  1. Asynchronous machine parameters such as Xl, Xs, etc. are actually used as inductances in the model, but are commonly referred to as reactances since, at nominal frequency, the PU values are the same. However, some references use the symbol L instead of X.
"""; . a rdf:Property; rdfs:label "AsynchronousMachineDynamics"@en; rdfs:comment "Asynchronous machine model with which this turbine-governor model is associated. TurbineGovernorDynamics shall have either an association to SynchronousMachineDynamics or to AsynchronousMachineDynamics."; rdfs:domain ; rdfs:range ; ; ; "Yes" . a rdf:Property; rdfs:label "TurbineGovernorDynamics"@en; rdfs:comment "Turbine-governor model associated with this asynchronous machine model."; rdfs:domain ; rdfs:range ; ; ; "No" . a rdf:Property; rdfs:label "AsynchronousMachineDynamics"@en; rdfs:comment "Asynchronous machine model with which this mechanical load model is associated. MechanicalLoadDynamics shall have either an association to SynchronousMachineDynamics or to AsynchronousMachineDynamics."; rdfs:domain ; rdfs:range ; ; ; "Yes" . a rdf:Property; rdfs:label "MechanicalLoadDynamics"@en; rdfs:comment "Mechanical load model associated with this asynchronous machine model."; rdfs:domain ; rdfs:range ; ; ; "No" . a rdf:Property; rdfs:label "AsynchronousMachineDynamics"@en; rdfs:comment "Asynchronous machine model with which this wind generator type 1 or type 2 model is associated."; rdfs:domain ; rdfs:range ; ; ; "Yes" . a rdf:Property; rdfs:label "WindTurbineType1or2Dynamics"@en; rdfs:comment "Wind generator type 1 or type 2 model associated with this asynchronous machine model."; rdfs:domain ; rdfs:range ; ; ; "No" . a rdfs:Class; rdfs:label "AsynchronousMachineTimeConstantReactance"@en; rdfs:subClassOf ; rdfs:comment """Parameter details:
  1. If X'' = X', a single cage (one equivalent rotor winding per axis) is modelled.
  2. The “p” in the attribute names is a substitution for a “prime” in the usual parameter notation, e.g. tpo refers to T'o.
The parameters used for models expressed in time constant reactance form include: - RotatingMachine.ratedS (MVAbase); - RotatingMachineDynamics.damping (D); - RotatingMachineDynamics.inertia (H); - RotatingMachineDynamics.saturationFactor (S1); - RotatingMachineDynamics.saturationFactor120 (S12); - RotatingMachineDynamics.statorLeakageReactance (Xl); - RotatingMachineDynamics.statorResistance (Rs); - .xs (Xs); - .xp (X'); - .xpp (X''); - .tpo (T'o); - .tppo (T''o)."""; ; . a rdf:Property; ; rdfs:label "xs"@en; rdfs:domain ; ; ; rdfs:comment "Synchronous reactance (Xs) (>= AsynchronousMachineTimeConstantReactance.xp). Typical value = 1,8." . a rdf:Property; ; rdfs:label "xp"@en; rdfs:domain ; ; ; rdfs:comment "Transient reactance (unsaturated) (X') (>= AsynchronousMachineTimeConstantReactance.xpp). Typical value = 0,5." . a rdf:Property; ; rdfs:label "xpp"@en; rdfs:domain ; ; ; rdfs:comment "Subtransient reactance (unsaturated) (X'') (> RotatingMachineDynamics.statorLeakageReactance). Typical value = 0,2." . a rdf:Property; ; rdfs:label "tpo"@en; rdfs:domain ; ; ; rdfs:comment "Transient rotor time constant (T'o) (> AsynchronousMachineTimeConstantReactance.tppo). Typical value = 5." . a rdf:Property; ; rdfs:label "tppo"@en; rdfs:domain ; ; ; rdfs:comment "Subtransient rotor time constant (T''o) (> 0). Typical value = 0,03." . a rdfs:Class; rdfs:label "AsynchronousMachineEquivalentCircuit"@en; rdfs:subClassOf ; rdfs:comment """The electrical equations of all variations of the asynchronous model are based on the AsynchronousEquivalentCircuit diagram for the direct- and quadrature- axes, with two equivalent rotor windings in each axis. Equations for conversion between equivalent circuit and time constant reactance forms: Xs = Xm + Xl X' = Xl + Xm x Xlr1 / (Xm + Xlr1) X'' = Xl + Xm x Xlr1 x Xlr2 / (Xm x Xlr1 + Xm x Xlr2 + Xlr1 x Xlr2) T'o = (Xm + Xlr1) / (omega0 x Rr1) T''o = (Xm x Xlr1 + Xm x Xlr2 + Xlr1 x Xlr2) / (omega0 x Rr2 x (Xm + Xlr1) Same equations using CIM attributes from AsynchronousMachineTimeConstantReactance class on left of \"=\" and AsynchronousMachineEquivalentCircuit class on right (except as noted): xs = xm + RotatingMachineDynamics.statorLeakageReactance xp = RotatingMachineDynamics.statorLeakageReactance + xm x xlr1 / (xm + xlr1) xpp = RotatingMachineDynamics.statorLeakageReactance + xm x xlr1 x xlr2 / (xm x xlr1 + xm x xlr2 + xlr1 x xlr2) tpo = (xm + xlr1) / (2 x pi x nominal frequency x rr1) tppo = (xm x xlr1 + xm x xlr2 + xlr1 x xlr2) / (2 x pi x nominal frequency x rr2 x (xm + xlr1)."""; ; . a rdf:Property; ; rdfs:label "xm"@en; rdfs:domain ; ; ; rdfs:comment "Magnetizing reactance." . a rdf:Property; ; rdfs:label "rr1"@en; rdfs:domain ; ; ; rdfs:comment "Damper 1 winding resistance." . a rdf:Property; ; rdfs:label "xlr1"@en; rdfs:domain ; ; ; rdfs:comment "Damper 1 winding leakage reactance." . ; rdfs:label "rr2"@en; rdfs:domain ; ; a rdf:Property; ; rdfs:comment "Damper 2 winding resistance." . a rdf:Property; ; rdfs:label "xlr2"@en; rdfs:domain ; ; ; rdfs:comment "Damper 2 winding leakage reactance." . a ; rdfs:label "TurbineGovernorDynamics"@en; rdfs:comment """The turbine-governor model is linked to one or two synchronous generators and determines the shaft mechanical power (Pm) or torque (Tm) for the generator model. Unlike IEEE standard models for other function blocks, the three IEEE turbine-governor standard models (GovHydroIEEE0, GovHydroIEEE2, and GovSteamIEEE1) are documented in IEEE Transactions, not in IEEE standards. For that reason, diagrams are supplied for those models. A 2012 IEEE report, Dynamic Models for Turbine-Governors in Power System Studies, provides updated information on a variety of models including IEEE, vendor and reliability authority models. Fully incorporating the results of that report into the CIM dynamics model is a future effort.""" . a rdfs:Class; rdfs:label "CrossCompoundTurbineGovernorDynamics"@en; rdfs:subClassOf ; rdfs:comment "Turbine-governor cross-compound function block whose behaviour is described by reference to a standard model or by definition of a user-defined model."; . a rdfs:Class; rdfs:label "TurbineGovernorDynamics"@en; rdfs:subClassOf ; rdfs:comment "Turbine-governor function block whose behaviour is described by reference to a standard model or by definition of a user-defined model."; . a rdf:Property; rdfs:label "TurbineGovernorDynamics"@en; rdfs:comment "Turbine-governor controlled by this turbine load controller."; rdfs:domain ; rdfs:range ; ; ; "Yes" . a rdf:Property; rdfs:label "TurbineLoadControllerDynamics"@en; rdfs:comment "Turbine load controller providing input to this turbine-governor."; rdfs:domain ; rdfs:range ; ; ; "No" . a rdfs:Class; rdfs:label "GovHydroIEEE0"@en; rdfs:subClassOf ; rdfs:comment """IEEE simplified hydro governor-turbine model. Used for mechanical-hydraulic and electro-hydraulic turbine governors, with or without steam feedback. Typical values given are for mechanical-hydraulic turbine-governor. Reference: IEEE Transactions on Power Apparatus and Systems, November/December 1973, Volume PAS-92, Number 6, Dynamic Models for Steam and Hydro Turbines in Power System Studies, page 1904."""; ; . a rdf:Property; ; rdfs:label "mwbase"@en; rdfs:domain ; ; ; rdfs:comment "Base for power values (MWbase) (> 0). Unit = MW." . a rdf:Property; ; rdfs:label "k"@en; rdfs:domain ; ; ; rdfs:comment "Governor gain (K)." . a rdf:Property; ; rdfs:label "t1"@en; rdfs:domain ; ; ; rdfs:comment "Governor lag time constant (T1) (>= 0). Typical value = 0,25." . a rdf:Property; ; rdfs:label "t2"@en; rdfs:domain ; ; ; rdfs:comment "Governor lead time constant (T2) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "t3"@en; rdfs:domain ; ; ; rdfs:comment "Gate actuator time constant (T3) (>= 0). Typical value = 0,1." . a rdf:Property; ; rdfs:label "t4"@en; rdfs:domain ; ; ; rdfs:comment "Water starting time (T4) (>= 0). " . a rdf:Property; ; rdfs:label "pmax"@en; rdfs:domain ; ; ; rdfs:comment "Gate maximum (Pmax) (> GovHydroIEEE0.pmin). " . a rdf:Property; ; rdfs:label "pmin"@en; rdfs:domain ; ; ; rdfs:comment "Gate minimum (Pmin) (< GovHydroIEEE.pmax). " . a rdfs:Class; rdfs:label "GovHydroIEEE2"@en; rdfs:subClassOf ; rdfs:comment """IEEE hydro turbine governor model represents plants with straightforward penstock configurations and hydraulic-dashpot governors. Reference: IEEE Transactions on Power Apparatus and Systems, November/December 1973, Volume PAS-92, Number 6, Dynamic Models for Steam and Hydro Turbines in Power System Studies, page 1904."""; ; . a rdf:Property; ; rdfs:label "mwbase"@en; rdfs:domain ; ; ; rdfs:comment "Base for power values (MWbase) (> 0). Unit = MW." . a rdf:Property; ; rdfs:label "tg"@en; rdfs:domain ; ; ; rdfs:comment "Gate servo time constant (Tg) (>= 0). Typical value = 0,5." . a rdf:Property; ; rdfs:label "tp"@en; rdfs:domain ; ; ; rdfs:comment "Pilot servo valve time constant (Tp) (>= 0). Typical value = 0,03." . a rdf:Property; ; rdfs:label "uo"@en; rdfs:domain ; ; ; rdfs:comment "Maximum gate opening velocity (Uo). Unit = PU / s. Typical value = 0,1." . a rdf:Property; ; rdfs:label "uc"@en; rdfs:domain ; ; ; rdfs:comment "Maximum gate closing velocity (Uc) (<0). Typical value = -0,1." . a rdf:Property; ; rdfs:label "pmax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum gate opening (Pmax) (> GovHydroIEEE2.pmin). Typical value = 1." . a rdf:Property; ; rdfs:label "pmin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum gate opening (Pmin) (<GovHydroIEEE2.pmax). Typical value = 0." . a rdf:Property; ; rdfs:label "rperm"@en; rdfs:domain ; ; ; rdfs:comment "Permanent droop (Rperm). Typical value = 0,05." . a rdf:Property; ; rdfs:label "rtemp"@en; rdfs:domain ; ; ; rdfs:comment "Temporary droop (Rtemp). Typical value = 0,5." . a rdf:Property; ; rdfs:label "tr"@en; rdfs:domain ; ; ; rdfs:comment "Dashpot time constant (Tr) (>= 0). Typical value = 12." . a rdf:Property; ; rdfs:label "tw"@en; rdfs:domain ; ; ; rdfs:comment "Water inertia time constant (Tw) (>= 0). Typical value = 2." . a rdf:Property; ; rdfs:label "kturb"@en; rdfs:domain ; ; ; rdfs:comment "Turbine gain (Kturb). Typical value = 1." . a rdf:Property; ; rdfs:label "aturb"@en; rdfs:domain ; ; ; rdfs:comment "Turbine numerator multiplier (Aturb). Typical value = -1." . a rdf:Property; ; rdfs:label "bturb"@en; rdfs:domain ; ; ; rdfs:comment "Turbine denominator multiplier (Bturb) (> 0). Typical value = 0,5." . a rdf:Property; ; rdfs:label "gv1"@en; rdfs:domain ; ; ; rdfs:comment "Nonlinear gain point 1, PU gv (Gv1). Typical value = 0." . a rdf:Property; ; rdfs:label "pgv1"@en; rdfs:domain ; ; ; rdfs:comment "Nonlinear gain point 1, PU power (Pgv1). Typical value = 0." . a rdf:Property; ; rdfs:label "gv2"@en; rdfs:domain ; ; ; rdfs:comment "Nonlinear gain point 2, PU gv (Gv2). Typical value = 0." . a rdf:Property; ; rdfs:label "pgv2"@en; rdfs:domain ; ; ; rdfs:comment "Nonlinear gain point 2, PU power (Pgv2). Typical value = 0." . a rdf:Property; ; rdfs:label "gv3"@en; rdfs:domain ; ; ; rdfs:comment "Nonlinear gain point 3, PU gv (Gv3). Typical value = 0." . a rdf:Property; ; rdfs:label "pgv3"@en; rdfs:domain ; ; ; rdfs:comment "Nonlinear gain point 3, PU power (Pgv3). Typical value = 0." . a rdf:Property; ; rdfs:label "gv4"@en; rdfs:domain ; ; ; rdfs:comment "Nonlinear gain point 4, PU gv (Gv4). Typical value = 0." . a rdf:Property; ; rdfs:label "pgv4"@en; rdfs:domain ; ; ; rdfs:comment "Nonlinear gain point 4, PU power (Pgv4). Typical value = 0." . a rdf:Property; ; rdfs:label "gv5"@en; rdfs:domain ; ; ; rdfs:comment "Nonlinear gain point 5, PU gv (Gv5). Typical value = 0." . a rdf:Property; ; rdfs:label "pgv5"@en; rdfs:domain ; ; ; rdfs:comment "Nonlinear gain point 5, PU power (Pgv5). Typical value = 0." . a rdf:Property; ; rdfs:label "gv6"@en; rdfs:domain ; ; ; rdfs:comment "Nonlinear gain point 6, PU gv (Gv6). Typical value = 0." . a rdf:Property; ; rdfs:label "pgv6"@en; rdfs:domain ; ; ; rdfs:comment "Nonlinear gain point 6, PU power (Pgv6). Typical value = 0." . a rdfs:Class; rdfs:label "GovSteamIEEE1"@en; rdfs:subClassOf ; rdfs:comment """IEEE steam turbine governor model. Reference: IEEE Transactions on Power Apparatus and Systems, November/December 1973, Volume PAS-92, Number 6, Dynamic Models for Steam and Hydro Turbines in Power System Studies, page 1904."""; ; . a rdf:Property; ; rdfs:label "mwbase"@en; rdfs:domain ; ; ; rdfs:comment "Base for power values (MWbase) (> 0). Unit = MW." . a rdf:Property; ; rdfs:label "k"@en; rdfs:domain ; ; ; rdfs:comment "Governor gain (reciprocal of droop) (K) (> 0). Typical value = 25." . a rdf:Property; ; rdfs:label "t1"@en; rdfs:domain ; ; ; rdfs:comment "Governor lag time constant (T1) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "t2"@en; rdfs:domain ; ; ; rdfs:comment "Governor lead time constant (T2) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "t3"@en; rdfs:domain ; ; ; rdfs:comment "Valve positioner time constant (T3) (> 0). Typical value = 0,1." . a rdf:Property; ; rdfs:label "uo"@en; rdfs:domain ; ; ; rdfs:comment "Maximum valve opening velocity (Uo) (> 0). Unit = PU / s. Typical value = 1." . a rdf:Property; ; rdfs:label "uc"@en; rdfs:domain ; ; ; rdfs:comment "Maximum valve closing velocity (Uc) (< 0). Unit = PU / s. Typical value = -10." . a rdf:Property; ; rdfs:label "pmax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum valve opening (Pmax) (> GovSteamIEEE1.pmin). Typical value = 1." . a rdf:Property; ; rdfs:label "pmin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum valve opening (Pmin) (>= 0 and < GovSteamIEEE1.pmax). Typical value = 0." . a rdf:Property; ; rdfs:label "t4"@en; rdfs:domain ; ; ; rdfs:comment "Inlet piping/steam bowl time constant (T4) (>= 0). Typical value = 0,3." . a rdf:Property; ; rdfs:label "k1"@en; rdfs:domain ; ; ; rdfs:comment "Fraction of HP shaft power after first boiler pass (K1). Typical value = 0,2." . a rdf:Property; ; rdfs:label "k2"@en; rdfs:domain ; ; ; rdfs:comment "Fraction of LP shaft power after first boiler pass (K2). Typical value = 0." . a rdf:Property; ; rdfs:label "t5"@en; rdfs:domain ; ; ; rdfs:comment "Time constant of second boiler pass (T5) (>= 0). Typical value = 5." . a rdf:Property; ; rdfs:label "k3"@en; rdfs:domain ; ; ; rdfs:comment "Fraction of HP shaft power after second boiler pass (K3). Typical value = 0,3." . a rdf:Property; ; rdfs:label "k4"@en; rdfs:domain ; ; ; rdfs:comment "Fraction of LP shaft power after second boiler pass (K4). Typical value = 0." . a rdf:Property; ; rdfs:label "t6"@en; rdfs:domain ; ; ; rdfs:comment "Time constant of third boiler pass (T6) (>= 0). Typical value = 0,5." . a rdf:Property; ; rdfs:label "k5"@en; rdfs:domain ; ; ; rdfs:comment "Fraction of HP shaft power after third boiler pass (K5). Typical value = 0,5." . a rdf:Property; ; rdfs:label "k6"@en; rdfs:domain ; ; ; rdfs:comment "Fraction of LP shaft power after third boiler pass (K6). Typical value = 0." . a rdf:Property; ; rdfs:label "t7"@en; rdfs:domain ; ; ; rdfs:comment "Time constant of fourth boiler pass (T7) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "k7"@en; rdfs:domain ; ; ; rdfs:comment "Fraction of HP shaft power after fourth boiler pass (K7). Typical value = 0." . a rdf:Property; ; rdfs:label "k8"@en; rdfs:domain ; ; ; rdfs:comment "Fraction of LP shaft power after fourth boiler pass (K8). Typical value = 0." . a rdfs:Class; rdfs:label "GovCT1"@en; rdfs:subClassOf ; rdfs:comment """General model for any prime mover with a PID governor, used primarily for combustion turbine and combined cycle units. This model can be used to represent a variety of prime movers controlled by PID governors. It is suitable, for example, for the representation of:
  • gas turbine and single shaft combined cycle turbines
  • diesel engines with modern electronic or digital governors
  • steam turbines where steam is supplied from a large boiler drum or a large header whose pressure is substantially constant over the period under study
  • simple hydro turbines in dam configurations where the water column length is short and water inertia effects are minimal.
Additional information on this model is available in the 2012 IEEE report, Dynamic Models for Turbine-Governors in Power System Studies, 3.1.2.3 pages 3-4 (GGOV1)."""; ; . a rdf:Property; ; rdfs:label "mwbase"@en; rdfs:domain ; ; ; rdfs:comment "Base for power values (MWbase) (> 0). Unit = MW." . a rdf:Property; ; rdfs:label "r"@en; rdfs:domain ; ; ; rdfs:comment "Permanent droop (R). Typical value = 0,04." . a rdf:Property; ; rdfs:label "rselect"@en; rdfs:domain ; rdfs:range ; ; rdfs:comment "Feedback signal for droop (Rselect). Typical value = electricalPower." . a rdf:Property; ; rdfs:label "tpelec"@en; rdfs:domain ; ; ; rdfs:comment "Electrical power transducer time constant (Tpelec) (> 0). Typical value = 1." . a rdf:Property; ; rdfs:label "maxerr"@en; rdfs:domain ; ; ; rdfs:comment "Maximum value for speed error signal (maxerr) (> GovCT1.minerr). Typical value = 0,05." . a rdf:Property; ; rdfs:label "minerr"@en; rdfs:domain ; ; ; rdfs:comment "Minimum value for speed error signal (minerr) (< GovCT1.maxerr). Typical value = -0,05." . a rdf:Property; ; rdfs:label "kpgov"@en; rdfs:domain ; ; ; rdfs:comment "Governor proportional gain (Kpgov). Typical value = 10." . a rdf:Property; ; rdfs:label "kigov"@en; rdfs:domain ; ; ; rdfs:comment "Governor integral gain (Kigov). Typical value = 2." . a rdf:Property; ; rdfs:label "kdgov"@en; rdfs:domain ; ; ; rdfs:comment "Governor derivative gain (Kdgov). Typical value = 0." . a rdf:Property; ; rdfs:label "tdgov"@en; rdfs:domain ; ; ; rdfs:comment "Governor derivative controller time constant (Tdgov) (>= 0). Typical value = 1." . a rdf:Property; ; rdfs:label "vmax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum valve position limit (Vmax) (> GovCT1.vmin). Typical value = 1." . a rdf:Property; ; rdfs:label "vmin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum valve position limit (Vmin) (< GovCT1.vmax). Typical value = 0,15." . a rdf:Property; ; rdfs:label "tact"@en; rdfs:domain ; ; ; rdfs:comment "Actuator time constant (Tact) (>= 0). Typical value = 0,5." . a rdf:Property; ; rdfs:label "kturb"@en; rdfs:domain ; ; ; rdfs:comment "Turbine gain (Kturb) (> 0). Typical value = 1,5." . a rdf:Property; ; rdfs:label "wfnl"@en; rdfs:domain ; ; ; rdfs:comment "No load fuel flow (Wfnl). Typical value = 0,2." . a rdf:Property; ; rdfs:label "tb"@en; rdfs:domain ; ; ; rdfs:comment "Turbine lag time constant (Tb) (> 0). Typical value = 0,5." . a rdf:Property; ; rdfs:label "tc"@en; rdfs:domain ; ; ; rdfs:comment "Turbine lead time constant (Tc) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "wfspd"@en; rdfs:domain ; ; ; rdfs:comment """Switch for fuel source characteristic to recognize that fuel flow, for a given fuel valve stroke, can be proportional to engine speed (Wfspd). true = fuel flow proportional to speed (for some gas turbines and diesel engines with positive displacement fuel injectors) false = fuel control system keeps fuel flow independent of engine speed. Typical value = true.""" . a rdf:Property; ; rdfs:label "teng"@en; rdfs:domain ; ; ; rdfs:comment "Transport time delay for diesel engine used in representing diesel engines where there is a small but measurable transport delay between a change in fuel flow setting and the development of torque (Teng) (>= 0). Teng should be zero in all but special cases where this transport delay is of particular concern. Typical value = 0." . a rdf:Property; ; rdfs:label "tfload"@en; rdfs:domain ; ; ; rdfs:comment "Load-limiter time constant (Tfload) (> 0). Typical value = 3." . a rdf:Property; ; rdfs:label "kpload"@en; rdfs:domain ; ; ; rdfs:comment "Load limiter proportional gain for PI controller (Kpload). Typical value = 2." . a rdf:Property; ; rdfs:label "kiload"@en; rdfs:domain ; ; ; rdfs:comment "Load limiter integral gain for PI controller (Kiload). Typical value = 0,67." . a rdf:Property; ; rdfs:label "ldref"@en; rdfs:domain ; ; ; rdfs:comment "Load limiter reference value (Ldref). Typical value = 1." . a rdf:Property; ; rdfs:label "dm"@en; rdfs:domain ; ; ; rdfs:comment "Speed sensitivity coefficient (Dm). Dm can represent either the variation of the engine power with the shaft speed or the variation of maximum power capability with shaft speed. If it is positive it describes the falling slope of the engine speed verses power characteristic as speed increases. A slightly falling characteristic is typical for reciprocating engines and some aero-derivative turbines. If it is negative the engine power is assumed to be unaffected by the shaft speed, but the maximum permissible fuel flow is taken to fall with falling shaft speed. This is characteristic of single-shaft industrial turbines due to exhaust temperature limits. Typical value = 0." . a rdf:Property; ; rdfs:label "ropen"@en; rdfs:domain ; ; ; rdfs:comment "Maximum valve opening rate (Ropen). Unit = PU / s. Typical value = 0.10." . a rdf:Property; ; rdfs:label "rclose"@en; rdfs:domain ; ; ; rdfs:comment "Minimum valve closing rate (Rclose). Unit = PU / s. Typical value = -0,1." . a rdf:Property; ; rdfs:label "kimw"@en; rdfs:domain ; ; ; rdfs:comment "Power controller (reset) gain (Kimw). The default value of 0,01 corresponds to a reset time of 100 s. A value of 0,001 corresponds to a relatively slow-acting load controller. Typical value = 0,01." . a rdf:Property; ; rdfs:label "aset"@en; rdfs:domain ; ; ; rdfs:comment "Acceleration limiter setpoint (Aset). Unit = PU / s. Typical value = 0,01." . a rdf:Property; ; rdfs:label "ka"@en; rdfs:domain ; ; ; rdfs:comment "Acceleration limiter gain (Ka). Typical value = 10." . a rdf:Property; ; rdfs:label "ta"@en; rdfs:domain ; ; ; rdfs:comment "Acceleration limiter time constant (Ta) (> 0). Typical value = 0,1." . a rdf:Property; ; rdfs:label "db"@en; rdfs:domain ; ; ; rdfs:comment "Speed governor deadband in PU speed (db). In the majority of applications, it is recommended that this value be set to zero. Typical value = 0." . a rdf:Property; ; rdfs:label "tsa"@en; rdfs:domain ; ; ; rdfs:comment "Temperature detection lead time constant (Tsa) (>= 0). Typical value = 4." . a rdf:Property; ; rdfs:label "tsb"@en; rdfs:domain ; ; ; rdfs:comment "Temperature detection lag time constant (Tsb) (>= 0). Typical value = 5." . a rdf:Property; ; rdfs:label "rup"@en; rdfs:domain ; ; ; rdfs:comment "Maximum rate of load limit increase (Rup). Typical value = 99." . a rdf:Property; ; rdfs:label "rdown"@en; rdfs:domain ; ; ; rdfs:comment "Maximum rate of load limit decrease (Rdown). Typical value = -99." . a rdfs:Class; rdfs:label "GovCT2"@en; rdfs:subClassOf ; rdfs:comment "General governor with frequency-dependent fuel flow limit. This model is a modification of the GovCT1 model in order to represent the frequency-dependent fuel flow limit of a specific gas turbine manufacturer."; ; . a rdf:Property; ; rdfs:label "mwbase"@en; rdfs:domain ; ; ; rdfs:comment "Base for power values (MWbase) (> 0). Unit = MW." . a rdf:Property; ; rdfs:label "r"@en; rdfs:domain ; ; ; rdfs:comment "Permanent droop (R). Typical value = 0,05." . a rdf:Property; ; rdfs:label "rselect"@en; rdfs:domain ; rdfs:range ; ; rdfs:comment "Feedback signal for droop (Rselect). Typical value = electricalPower." . a rdf:Property; ; rdfs:label "tpelec"@en; rdfs:domain ; ; ; rdfs:comment "Electrical power transducer time constant (Tpelec) (>= 0). Typical value = 2,5." . a rdf:Property; ; rdfs:label "maxerr"@en; rdfs:domain ; ; ; rdfs:comment "Maximum value for speed error signal (Maxerr) (> GovCT2.minerr). Typical value = 1." . a rdf:Property; ; rdfs:label "minerr"@en; rdfs:domain ; ; ; rdfs:comment "Minimum value for speed error signal (Minerr) (< GovCT2.maxerr). Typical value = -1." . a rdf:Property; ; rdfs:label "kpgov"@en; rdfs:domain ; ; ; rdfs:comment "Governor proportional gain (Kpgov). Typical value = 4." . a rdf:Property; ; rdfs:label "kigov"@en; rdfs:domain ; ; ; rdfs:comment "Governor integral gain (Kigov). Typical value = 0,45." . a rdf:Property; ; rdfs:label "kdgov"@en; rdfs:domain ; ; ; rdfs:comment "Governor derivative gain (Kdgov). Typical value = 0." . a rdf:Property; ; rdfs:label "tdgov"@en; rdfs:domain ; ; ; rdfs:comment "Governor derivative controller time constant (Tdgov) (>= 0). Typical value = 1." . a rdf:Property; ; rdfs:label "vmax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum valve position limit (Vmax) (> GovCT2.vmin). Typical value = 1." . a rdf:Property; ; rdfs:label "vmin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum valve position limit (Vmin) (< GovCT2.vmax). Typical value = 0,175." . a rdf:Property; ; rdfs:label "tact"@en; rdfs:domain ; ; ; rdfs:comment "Actuator time constant (Tact) (>= 0). Typical value = 0,4." . a rdf:Property; ; rdfs:label "kturb"@en; rdfs:domain ; ; ; rdfs:comment "Turbine gain (Kturb). Typical value = 1,9168." . a rdf:Property; ; rdfs:label "wfnl"@en; rdfs:domain ; ; ; rdfs:comment "No load fuel flow (Wfnl). Typical value = 0,187." . a rdf:Property; ; rdfs:label "tb"@en; rdfs:domain ; ; ; rdfs:comment "Turbine lag time constant (Tb) (>= 0). Typical value = 0,1." . a rdf:Property; ; rdfs:label "tc"@en; rdfs:domain ; ; ; rdfs:comment "Turbine lead time constant (Tc) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "wfspd"@en; rdfs:domain ; ; ; rdfs:comment """Switch for fuel source characteristic to recognize that fuel flow, for a given fuel valve stroke, can be proportional to engine speed (Wfspd). true = fuel flow proportional to speed (for some gas turbines and diesel engines with positive displacement fuel injectors) false = fuel control system keeps fuel flow independent of engine speed. Typical value = false.""" . a rdf:Property; ; rdfs:label "teng"@en; rdfs:domain ; ; ; rdfs:comment "Transport time delay for diesel engine used in representing diesel engines where there is a small but measurable transport delay between a change in fuel flow setting and the development of torque (Teng) (>= 0). Teng should be zero in all but special cases where this transport delay is of particular concern. Typical value = 0." . a rdf:Property; ; rdfs:label "tfload"@en; rdfs:domain ; ; ; rdfs:comment "Load limiter time constant (Tfload) (>= 0). Typical value = 3." . a rdf:Property; ; rdfs:label "kpload"@en; rdfs:domain ; ; ; rdfs:comment "Load limiter proportional gain for PI controller (Kpload). Typical value = 1." . a rdf:Property; ; rdfs:label "kiload"@en; rdfs:domain ; ; ; rdfs:comment "Load limiter integral gain for PI controller (Kiload). Typical value = 1." . a rdf:Property; ; rdfs:label "ldref"@en; rdfs:domain ; ; ; rdfs:comment "Load limiter reference value (Ldref). Typical value = 1." . a rdf:Property; ; rdfs:label "dm"@en; rdfs:domain ; ; ; rdfs:comment "Speed sensitivity coefficient (Dm). Dm can represent either the variation of the engine power with the shaft speed or the variation of maximum power capability with shaft speed. If it is positive it describes the falling slope of the engine speed verses power characteristic as speed increases. A slightly falling characteristic is typical for reciprocating engines and some aero-derivative turbines. If it is negative the engine power is assumed to be unaffected by the shaft speed, but the maximum permissible fuel flow is taken to fall with falling shaft speed. This is characteristic of single-shaft industrial turbines due to exhaust temperature limits. Typical value = 0." . a rdf:Property; ; rdfs:label "ropen"@en; rdfs:domain ; ; ; rdfs:comment "Maximum valve opening rate (Ropen). Unit = PU / s. Typical value = 99." . a rdf:Property; ; rdfs:label "rclose"@en; rdfs:domain ; ; ; rdfs:comment "Minimum valve closing rate (Rclose). Unit = PU / s. Typical value = -99." . a rdf:Property; ; rdfs:label "kimw"@en; rdfs:domain ; ; ; rdfs:comment "Power controller (reset) gain (Kimw). The default value of 0,01 corresponds to a reset time of 100 seconds. A value of 0,001 corresponds to a relatively slow-acting load controller. Typical value = 0." . a rdf:Property; ; rdfs:label "aset"@en; rdfs:domain ; ; ; rdfs:comment "Acceleration limiter setpoint (Aset). Unit = PU / s. Typical value = 10." . a rdf:Property; ; rdfs:label "ka"@en; rdfs:domain ; ; ; rdfs:comment "Acceleration limiter gain (Ka). Typical value = 10." . a rdf:Property; ; rdfs:label "ta"@en; rdfs:domain ; ; ; rdfs:comment "Acceleration limiter time constant (Ta) (>= 0). Typical value = 1." . a rdf:Property; ; rdfs:label "db"@en; rdfs:domain ; ; ; rdfs:comment "Speed governor deadband in PU speed (db). In the majority of applications, it is recommended that this value be set to zero. Typical value = 0." . a rdf:Property; ; rdfs:label "tsa"@en; rdfs:domain ; ; ; rdfs:comment "Temperature detection lead time constant (Tsa) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "tsb"@en; rdfs:domain ; ; ; rdfs:comment "Temperature detection lag time constant (Tsb) (>= 0). Typical value = 50." . a rdf:Property; ; rdfs:label "rup"@en; rdfs:domain ; ; ; rdfs:comment "Maximum rate of load limit increase (Rup). Typical value = 99." . a rdf:Property; ; rdfs:label "rdown"@en; rdfs:domain ; ; ; rdfs:comment "Maximum rate of load limit decrease (Rdown). Typical value = -99." . a rdf:Property; ; rdfs:label "prate"@en; rdfs:domain ; ; ; rdfs:comment "Ramp rate for frequency-dependent power limit (Prate). Typical value = 0,017." . a rdf:Property; ; rdfs:label "flim1"@en; rdfs:domain ; ; ; rdfs:comment "Frequency threshold 1 (Flim1). Unit = Hz. Typical value = 59." . a rdf:Property; ; rdfs:label "plim1"@en; rdfs:domain ; ; ; rdfs:comment "Power limit 1 (Plim1). Typical value = 0,8325." . a rdf:Property; ; rdfs:label "flim2"@en; rdfs:domain ; ; ; rdfs:comment "Frequency threshold 2 (Flim2). Unit = Hz. Typical value = 0." . a rdf:Property; ; rdfs:label "plim2"@en; rdfs:domain ; ; ; rdfs:comment "Power limit 2 (Plim2). Typical value = 0." . a rdf:Property; ; rdfs:label "flim3"@en; rdfs:domain ; ; ; rdfs:comment "Frequency threshold 3 (Flim3). Unit = Hz. Typical value = 0." . a rdf:Property; ; rdfs:label "plim3"@en; rdfs:domain ; ; ; rdfs:comment "Power limit 3 (Plim3). Typical value = 0." . a rdf:Property; ; rdfs:label "flim4"@en; rdfs:domain ; ; ; rdfs:comment "Frequency threshold 4 (Flim4). Unit = Hz. Typical value = 0." . a rdf:Property; ; rdfs:label "plim4"@en; rdfs:domain ; ; ; rdfs:comment "Power limit 4 (Plim4). Typical value = 0." . a rdf:Property; ; rdfs:label "flim5"@en; rdfs:domain ; ; ; rdfs:comment "Frequency threshold 5 (Flim5). Unit = Hz. Typical value = 0." . a rdf:Property; ; rdfs:label "plim5"@en; rdfs:domain ; ; ; rdfs:comment "Power limit 5 (Plim5). Typical value = 0." . a rdf:Property; ; rdfs:label "flim6"@en; rdfs:domain ; ; ; rdfs:comment "Frequency threshold 6 (Flim6). Unit = Hz. Typical value = 0." . a rdf:Property; ; rdfs:label "plim6"@en; rdfs:domain ; ; ; rdfs:comment "Power limit 6 (Plim6). Typical value = 0." . a rdf:Property; ; rdfs:label "flim7"@en; rdfs:domain ; ; ; rdfs:comment "Frequency threshold 7 (Flim7). Unit = Hz. Typical value = 0." . a rdf:Property; ; rdfs:label "plim7"@en; rdfs:domain ; ; ; rdfs:comment "Power limit 7 (Plim7). Typical value = 0." . a rdf:Property; ; rdfs:label "flim8"@en; rdfs:domain ; ; ; rdfs:comment "Frequency threshold 8 (Flim8). Unit = Hz. Typical value = 0." . a rdf:Property; ; rdfs:label "plim8"@en; rdfs:domain ; ; ; rdfs:comment "Power limit 8 (Plim8). Typical value = 0." . a rdf:Property; ; rdfs:label "flim9"@en; rdfs:domain ; ; ; rdfs:comment "Frequency threshold 9 (Flim9). Unit = Hz. Typical value = 0." . a rdf:Property; ; rdfs:label "plim9"@en; rdfs:domain ; ; ; rdfs:comment "Power Limit 9 (Plim9). Typical value = 0." . a rdf:Property; ; rdfs:label "flim10"@en; rdfs:domain ; ; ; rdfs:comment "Frequency threshold 10 (Flim10). Unit = Hz. Typical value = 0." . a rdf:Property; ; rdfs:label "plim10"@en; rdfs:domain ; ; ; rdfs:comment "Power limit 10 (Plim10). Typical value = 0." . a rdfs:Class; rdfs:label "GovGAST"@en; rdfs:subClassOf ; rdfs:comment "Single shaft gas turbine."; ; . a rdf:Property; ; rdfs:label "mwbase"@en; rdfs:domain ; ; ; rdfs:comment "Base for power values (MWbase) (> 0). Unit = MW." . a rdf:Property; ; rdfs:label "r"@en; rdfs:domain ; ; ; rdfs:comment "Permanent droop (R) (>0). Typical value = 0,04." . a rdf:Property; ; rdfs:label "t1"@en; rdfs:domain ; ; ; rdfs:comment "Governor mechanism time constant (T1) (>= 0). T1 represents the natural valve positioning time constant of the governor for small disturbances, as seen when rate limiting is not in effect. Typical value = 0,5." . a rdf:Property; ; rdfs:label "t2"@en; rdfs:domain ; ; ; rdfs:comment "Turbine power time constant (T2) (>= 0). T2 represents delay due to internal energy storage of the gas turbine engine. T2 can be used to give a rough approximation to the delay associated with acceleration of the compressor spool of a multi-shaft engine, or with the compressibility of gas in the plenum of a free power turbine of an aero-derivative unit, for example. Typical value = 0,5." . a rdf:Property; ; rdfs:label "t3"@en; rdfs:domain ; ; ; rdfs:comment "Turbine exhaust temperature time constant (T3) (>= 0). Typical value = 3." . a rdf:Property; ; rdfs:label "at"@en; rdfs:domain ; ; ; rdfs:comment "Ambient temperature load limit (Load Limit). Typical value = 1." . a rdf:Property; ; rdfs:label "kt"@en; rdfs:domain ; ; ; rdfs:comment "Temperature limiter gain (Kt). Typical value = 3." . a rdf:Property; ; rdfs:label "vmax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum turbine power, PU of MWbase (Vmax) (> GovGAST.vmin). Typical value = 1." . a rdf:Property; ; rdfs:label "vmin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum turbine power, PU of MWbase (Vmin) (< GovGAST.vmax). Typical value = 0." . a rdf:Property; ; rdfs:label "dturb"@en; rdfs:domain ; ; ; rdfs:comment "Turbine damping factor (Dturb). Typical value = 0,18." . a rdfs:Class; rdfs:label "GovGAST1"@en; rdfs:subClassOf ; rdfs:comment "Modified single shaft gas turbine."; ; . a rdf:Property; ; rdfs:label "mwbase"@en; rdfs:domain ; ; ; rdfs:comment "Base for power values (MWbase) (> 0). Unit = MW." . a rdf:Property; ; rdfs:label "r"@en; rdfs:domain ; ; ; rdfs:comment "Permanent droop (R) (>0). Typical value = 0,04." . a rdf:Property; ; rdfs:label "t1"@en; rdfs:domain ; ; ; rdfs:comment "Governor mechanism time constant (T1) (>= 0). T1 represents the natural valve positioning time constant of the governor for small disturbances, as seen when rate limiting is not in effect. Typical value = 0,5." . a rdf:Property; ; rdfs:label "t2"@en; rdfs:domain ; ; ; rdfs:comment "Turbine power time constant (T2) (>= 0). T2 represents delay due to internal energy storage of the gas turbine engine. T2 can be used to give a rough approximation to the delay associated with acceleration of the compressor spool of a multi-shaft engine, or with the compressibility of gas in the plenum of the free power turbine of an aero-derivative unit, for example. Typical value = 0,5." . a rdf:Property; ; rdfs:label "t3"@en; rdfs:domain ; ; ; rdfs:comment "Turbine exhaust temperature time constant (T3) (>= 0). T3 represents delay in the exhaust temperature and load limiting system. Typical value = 3." . a rdf:Property; ; rdfs:label "lmax"@en; rdfs:domain ; ; ; rdfs:comment "Ambient temperature load limit (Lmax). Lmax is the turbine power output corresponding to the limiting exhaust gas temperature. Typical value = 1." . a rdf:Property; ; rdfs:label "kt"@en; rdfs:domain ; ; ; rdfs:comment "Temperature limiter gain (Kt). Typical value = 3." . a rdf:Property; ; rdfs:label "vmax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum turbine power, PU of MWbase (Vmax) (> GovGAST1.vmin). Typical value = 1." . a rdf:Property; ; rdfs:label "vmin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum turbine power, PU of MWbase (Vmin) (< GovGAST1.vmax). Typical value = 0." . a rdf:Property; ; rdfs:label "fidle"@en; rdfs:domain ; ; ; rdfs:comment "Fuel flow at zero power output (Fidle). Typical value = 0,18." . a rdf:Property; ; rdfs:label "rmax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum fuel valve opening rate (Rmax). Unit = PU / s. Typical value = 1." . a rdf:Property; ; rdfs:label "loadinc"@en; rdfs:domain ; ; ; rdfs:comment "Valve position change allowed at fast rate (Loadinc). Typical value = 0,05." . a rdf:Property; ; rdfs:label "tltr"@en; rdfs:domain ; ; ; rdfs:comment "Valve position averaging time constant (Tltr) (>= 0). Typical value = 10." . a rdf:Property; ; rdfs:label "ltrate"@en; rdfs:domain ; ; ; rdfs:comment "Maximum long term fuel valve opening rate (Ltrate). Typical value = 0,02." . a rdf:Property; ; rdfs:label "a"@en; rdfs:domain ; ; ; rdfs:comment "Turbine power time constant numerator scale factor (a). Typical value = 0,8." . a rdf:Property; ; rdfs:label "b"@en; rdfs:domain ; ; ; rdfs:comment "Turbine power time constant denominator scale factor (b) (>0). Typical value = 1." . a rdf:Property; ; rdfs:label "db1"@en; rdfs:domain ; ; ; rdfs:comment "Intentional dead-band width (db1). Unit = Hz. Typical value = 0." . a rdf:Property; ; rdfs:label "eps"@en; rdfs:domain ; ; ; rdfs:comment "Intentional db hysteresis (eps). Unit = Hz. Typical value = 0." . a rdf:Property; ; rdfs:label "db2"@en; rdfs:domain ; ; ; rdfs:comment "Unintentional dead-band (db2). Unit = MW. Typical value = 0." . a rdf:Property; ; rdfs:label "gv1"@en; rdfs:domain ; ; ; rdfs:comment "Nonlinear gain point 1, PU gv (Gv1). Typical value = 0." . a rdf:Property; ; rdfs:label "pgv1"@en; rdfs:domain ; ; ; rdfs:comment "Nonlinear gain point 1, PU power (Pgv1). Typical value = 0." . a rdf:Property; ; rdfs:label "gv2"@en; rdfs:domain ; ; ; rdfs:comment "Nonlinear gain point 2,PU gv (Gv2). Typical value = 0." . a rdf:Property; ; rdfs:label "pgv2"@en; rdfs:domain ; ; ; rdfs:comment "Nonlinear gain point 2, PU power (Pgv2). Typical value = 0." . a rdf:Property; ; rdfs:label "gv3"@en; rdfs:domain ; ; ; rdfs:comment "Nonlinear gain point 3, PU gv (Gv3). Typical value = 0." . a rdf:Property; ; rdfs:label "pgv3"@en; rdfs:domain ; ; ; rdfs:comment "Nonlinear gain point 3, PU power (Pgv3). Typical value = 0." . a rdf:Property; ; rdfs:label "gv4"@en; rdfs:domain ; ; ; rdfs:comment "Nonlinear gain point 4, PU gv (Gv4). Typical value = 0." . a rdf:Property; ; rdfs:label "pgv4"@en; rdfs:domain ; ; ; rdfs:comment "Nonlinear gain point 4, PU power (Pgv4). Typical value = 0." . a rdf:Property; ; rdfs:label "gv5"@en; rdfs:domain ; ; ; rdfs:comment "Nonlinear gain point 5, PU gv (Gv5). Typical value = 0." . a rdf:Property; ; rdfs:label "pgv5"@en; rdfs:domain ; ; ; rdfs:comment "Nonlinear gain point 5, PU power (Pgv5). Typical value = 0." . a rdf:Property; ; rdfs:label "gv6"@en; rdfs:domain ; ; ; rdfs:comment "Nonlinear gain point 6, PU gv (Gv6). Typical value = 0." . a rdf:Property; ; rdfs:label "pgv6"@en; rdfs:domain ; ; ; rdfs:comment "Nonlinear gain point 6, PU power (Pgv6). Typical value = 0." . a rdf:Property; ; rdfs:label "ka"@en; rdfs:domain ; ; ; rdfs:comment "Governor gain (Ka). Typical value = 0." . a rdf:Property; ; rdfs:label "t4"@en; rdfs:domain ; ; ; rdfs:comment "Governor lead time constant (T4) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "t5"@en; rdfs:domain ; ; ; rdfs:comment "Governor lag time constant (T5) (>= 0). If = 0, entire gain and lead-lag block is bypassed. Typical value = 0." . a rdfs:Class; rdfs:label "GovGAST2"@en; rdfs:subClassOf ; rdfs:comment "Gas turbine."; ; . a rdf:Property; ; rdfs:label "mwbase"@en; rdfs:domain ; ; ; rdfs:comment "Base for power values (MWbase) (> 0). Unit = MW." . a rdf:Property; ; rdfs:label "w"@en; rdfs:domain ; ; ; rdfs:comment "Governor gain (1/droop) on turbine rating (W)." . a rdf:Property; ; rdfs:label "x"@en; rdfs:domain ; ; ; rdfs:comment "Governor lead time constant (X) (>= 0)." . a rdf:Property; ; rdfs:label "y"@en; rdfs:domain ; ; ; rdfs:comment "Governor lag time constant (Y) (> 0)." . a rdf:Property; ; rdfs:label "z"@en; rdfs:domain ; ; ; rdfs:comment """Governor mode (Z). 1 = droop 0 = isochronous.""" . a rdf:Property; ; rdfs:label "etd"@en; rdfs:domain ; ; ; rdfs:comment "Turbine and exhaust delay (Etd) (>= 0)." . a rdf:Property; ; rdfs:label "tcd"@en; rdfs:domain ; ; ; rdfs:comment "Compressor discharge time constant (Tcd) (>= 0)." . a rdf:Property; ; rdfs:label "trate"@en; rdfs:domain ; ; ; rdfs:comment "Turbine rating (Trate). Unit = MW." . a rdf:Property; ; rdfs:label "t"@en; rdfs:domain ; ; ; rdfs:comment "Fuel control time constant (T) (>= 0)." . a rdf:Property; ; rdfs:label "tmax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum turbine limit (Tmax) (> GovGAST2.tmin)." . a rdf:Property; ; rdfs:label "tmin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum turbine limit (Tmin) (< GovGAST2.tmax)." . a rdf:Property; ; rdfs:label "ecr"@en; rdfs:domain ; ; ; rdfs:comment "Combustion reaction time delay (Ecr) (>= 0)." . a rdf:Property; ; rdfs:label "k3"@en; rdfs:domain ; ; ; rdfs:comment "Ratio of fuel adjustment (K3)." . a rdf:Property; ; rdfs:label "a"@en; rdfs:domain ; ; ; rdfs:comment "Valve positioner (A)." . a rdf:Property; ; rdfs:label "b"@en; rdfs:domain ; ; ; rdfs:comment "Valve positioner (B). " . a rdf:Property; ; rdfs:label "c"@en; rdfs:domain ; ; ; rdfs:comment "Valve positioner (C). " . a rdf:Property; ; rdfs:label "tf"@en; rdfs:domain ; ; ; rdfs:comment "Fuel system time constant (Tf) (>= 0)." . a rdf:Property; ; rdfs:label "kf"@en; rdfs:domain ; ; ; rdfs:comment "Fuel system feedback (Kf)." . a rdf:Property; ; rdfs:label "k5"@en; rdfs:domain ; ; ; rdfs:comment "Gain of radiation shield (K5)." . a rdf:Property; ; rdfs:label "k4"@en; rdfs:domain ; ; ; rdfs:comment "Gain of radiation shield (K4)." . a rdf:Property; ; rdfs:label "t3"@en; rdfs:domain ; ; ; rdfs:comment "Radiation shield time constant (T3) (>= 0)." . a rdf:Property; ; rdfs:label "t4"@en; rdfs:domain ; ; ; rdfs:comment "Thermocouple time constant (T4) (>= 0)." . a rdf:Property; ; rdfs:label "tt"@en; rdfs:domain ; ; ; rdfs:comment "Temperature controller integration rate (Tt) (>= 0)." . a rdf:Property; ; rdfs:label "t5"@en; rdfs:domain ; ; ; rdfs:comment "Temperature control time constant (T5) (>= 0)." . a rdf:Property; ; rdfs:label "af1"@en; rdfs:domain ; ; ; rdfs:comment "Exhaust temperature parameter (Af1). Unit = PU temperature. Based on temperature in degrees C." . a rdf:Property; ; rdfs:label "bf1"@en; rdfs:domain ; ; ; rdfs:comment "(Bf1). Bf1 = E(1 - W) where E (speed sensitivity coefficient) is 0,55 to 0,65 x Tr. Unit = PU temperature. Based on temperature in degrees C." . a rdf:Property; ; rdfs:label "af2"@en; rdfs:domain ; ; ; rdfs:comment "Coefficient equal to 0,5(1-speed) (Af2)." . a rdf:Property; ; rdfs:label "bf2"@en; rdfs:domain ; ; ; rdfs:comment "Turbine torque coefficient Khhv (depends on heating value of fuel stream in combustion chamber) (Bf2)." . a rdf:Property; ; rdfs:label "cf2"@en; rdfs:domain ; ; ; rdfs:comment "Coefficient defining fuel flow where power output is 0% (Cf2). Synchronous but no output. Typically 0,23 x Khhv (23% fuel flow)." . a rdf:Property; ; rdfs:label "tr"@en; rdfs:domain ; ; ; rdfs:comment "Rated temperature (Tr). Unit = °C depending on parameters Af1 and Bf1." . a rdf:Property; ; rdfs:label "k6"@en; rdfs:domain ; ; ; rdfs:comment "Minimum fuel flow (K6). " . a rdf:Property; ; rdfs:label "tc"@en; rdfs:domain ; ; ; rdfs:comment "Temperature control (Tc). Unit = °F or °C depending on parameters Af1 and Bf1. " . a rdfs:Class; rdfs:label "GovGAST3"@en; rdfs:subClassOf ; rdfs:comment "Generic turbogas with acceleration and temperature controller."; ; . a rdf:Property; ; rdfs:label "bp"@en; rdfs:domain ; ; ; rdfs:comment "Droop (bp). Typical value = 0,05." . a rdf:Property; ; rdfs:label "tg"@en; rdfs:domain ; ; ; rdfs:comment "Time constant of speed governor (Tg) (>= 0). Typical value = 0,05." . a rdf:Property; ; rdfs:label "rcmx"@en; rdfs:domain ; ; ; rdfs:comment "Maximum fuel flow (RCMX). Typical value = 1." . a rdf:Property; ; rdfs:label "rcmn"@en; rdfs:domain ; ; ; rdfs:comment "Minimum fuel flow (RCMN). Typical value = -0,1." . a rdf:Property; ; rdfs:label "ky"@en; rdfs:domain ; ; ; rdfs:comment "Coefficient of transfer function of fuel valve positioner (Ky). Typical value = 1." . a rdf:Property; ; rdfs:label "ty"@en; rdfs:domain ; ; ; rdfs:comment "Time constant of fuel valve positioner (Ty) (>= 0). Typical value = 0,2." . a rdf:Property; ; rdfs:label "tac"@en; rdfs:domain ; ; ; rdfs:comment "Fuel control time constant (Tac) (>= 0). Typical value = 0,1." . a rdf:Property; ; rdfs:label "kac"@en; rdfs:domain ; ; ; rdfs:comment "Fuel system feedback (KAC). Typical value = 0." . a rdf:Property; ; rdfs:label "tc"@en; rdfs:domain ; ; ; rdfs:comment "Compressor discharge volume time constant (Tc) (>= 0). Typical value = 0,2." . a rdf:Property; ; rdfs:label "bca"@en; rdfs:domain ; ; ; rdfs:comment "Acceleration limit set-point (Bca). Unit = 1/s. Typical value = 0,01." . a rdf:Property; ; rdfs:label "kca"@en; rdfs:domain ; ; ; rdfs:comment "Acceleration control integral gain (Kca). Unit = 1/s. Typical value = 100." . a rdf:Property; ; rdfs:label "dtc"@en; rdfs:domain ; ; ; rdfs:comment "Exhaust temperature variation due to fuel flow increasing from 0 to 1 PU (deltaTc). Typical value = 390." . a rdf:Property; ; rdfs:label "ka"@en; rdfs:domain ; ; ; rdfs:comment "Minimum fuel flow (Ka). Typical value = 0,23." . a rdf:Property; ; rdfs:label "tsi"@en; rdfs:domain ; ; ; rdfs:comment "Time constant of radiation shield (Tsi) (>= 0). Typical value = 15." . a rdf:Property; ; rdfs:label "ksi"@en; rdfs:domain ; ; ; rdfs:comment "Gain of radiation shield (Ksi). Typical value = 0,8." . a rdf:Property; ; rdfs:label "ttc"@en; rdfs:domain ; ; ; rdfs:comment "Time constant of thermocouple (Ttc) (>= 0). Typical value = 2,5." . a rdf:Property; ; rdfs:label "tfen"@en; rdfs:domain ; ; ; rdfs:comment "Turbine rated exhaust temperature correspondent to Pm=1 PU (Tfen). Typical value = 540." . a rdf:Property; ; rdfs:label "td"@en; rdfs:domain ; ; ; rdfs:comment "Temperature controller derivative gain (Td) (>= 0). Typical value = 3,3." . a rdf:Property; ; rdfs:label "tt"@en; rdfs:domain ; ; ; rdfs:comment "Temperature controller integration rate (Tt). Typical value = 250." . a rdf:Property; ; rdfs:label "mxef"@en; rdfs:domain ; ; ; rdfs:comment "Fuel flow maximum positive error value (MXef). Typical value = 0,05." . a rdf:Property; ; rdfs:label "mnef"@en; rdfs:domain ; ; ; rdfs:comment "Fuel flow maximum negative error value (MNef). Typical value = -0,05." . a rdfs:Class; rdfs:label "GovGAST4"@en; rdfs:subClassOf ; rdfs:comment "Generic turbogas."; ; . a rdf:Property; ; rdfs:label "bp"@en; rdfs:domain ; ; ; rdfs:comment "Droop (bp). Typical value = 0,05." . a rdf:Property; ; rdfs:label "ty"@en; rdfs:domain ; ; ; rdfs:comment "Time constant of fuel valve positioner (Ty) (>= 0). Typical value = 0,1." . a rdf:Property; ; rdfs:label "ta"@en; rdfs:domain ; ; ; rdfs:comment "Maximum gate opening velocity (TA) (>= 0). Typical value = 3." . a rdf:Property; ; rdfs:label "tc"@en; rdfs:domain ; ; ; rdfs:comment "Maximum gate closing velocity (TC) (>= 0). Typical value = 0,5." . a rdf:Property; ; rdfs:label "tcm"@en; rdfs:domain ; ; ; rdfs:comment "Fuel control time constant (Tcm) (>= 0). Typical value = 0,1." . a rdf:Property; ; rdfs:label "ktm"@en; rdfs:domain ; ; ; rdfs:comment "Compressor gain (Ktm). Typical value = 0." . a rdf:Property; ; rdfs:label "tm"@en; rdfs:domain ; ; ; rdfs:comment "Compressor discharge volume time constant (Tm) (>= 0). Typical value = 0,2." . a rdf:Property; ; rdfs:label "rymx"@en; rdfs:domain ; ; ; rdfs:comment "Maximum valve opening (RYMX). Typical value = 1,1." . a rdf:Property; ; rdfs:label "rymn"@en; rdfs:domain ; ; ; rdfs:comment "Minimum valve opening (RYMN). Typical value = 0." . a rdf:Property; ; rdfs:label "mxef"@en; rdfs:domain ; ; ; rdfs:comment "Fuel flow maximum positive error value (MXef). Typical value = 0,05." . a rdf:Property; ; rdfs:label "mnef"@en; rdfs:domain ; ; ; rdfs:comment "Fuel flow maximum negative error value (MNef). Typical value = -0,05." . a rdfs:Class; rdfs:label "GovGASTWD"@en; rdfs:subClassOf ; rdfs:comment """Woodward™ gas turbine governor. [Footnote: Woodward gas turbines are an example of suitable products available commercially. This information is given for the convenience of users of this document and does not constitute an endorsement by IEC of these products.] """; ; . a rdf:Property; ; rdfs:label "mwbase"@en; rdfs:domain ; ; ; rdfs:comment "Base for power values (MWbase) (> 0). Unit = MW." . a rdf:Property; ; rdfs:label "kdroop"@en; rdfs:domain ; ; ; rdfs:comment "(Kdroop) (>= 0)." . a rdf:Property; ; rdfs:label "kp"@en; rdfs:domain ; ; ; rdfs:comment "PID proportional gain (Kp)." . a rdf:Property; ; rdfs:label "ki"@en; rdfs:domain ; ; ; rdfs:comment "Isochronous Governor Gain (Ki)." . a rdf:Property; ; rdfs:label "kd"@en; rdfs:domain ; ; ; rdfs:comment "Drop governor gain (Kd)." . a rdf:Property; ; rdfs:label "etd"@en; rdfs:domain ; ; ; rdfs:comment "Turbine and exhaust delay (Etd) (>= 0)." . a rdf:Property; ; rdfs:label "tcd"@en; rdfs:domain ; ; ; rdfs:comment "Compressor discharge time constant (Tcd) (>= 0)." . a rdf:Property; ; rdfs:label "trate"@en; rdfs:domain ; ; ; rdfs:comment "Turbine rating (Trate). Unit = MW." . a rdf:Property; ; rdfs:label "t"@en; rdfs:domain ; ; ; rdfs:comment "Fuel control time constant (T) (>= 0)." . a rdf:Property; ; rdfs:label "tmax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum Turbine limit (Tmax) (> GovGASTWD.tmin)." . a rdf:Property; ; rdfs:label "tmin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum turbine limit (Tmin) (< GovGASTWD.tmax)." . a rdf:Property; ; rdfs:label "ecr"@en; rdfs:domain ; ; ; rdfs:comment "Combustion reaction time delay (Ecr) (>= 0)." . a rdf:Property; ; rdfs:label "k3"@en; rdfs:domain ; ; ; rdfs:comment "Ratio of fuel adjustment (K3)." . a rdf:Property; ; rdfs:label "a"@en; rdfs:domain ; ; ; rdfs:comment "Valve positioner (A)." . a rdf:Property; ; rdfs:label "b"@en; rdfs:domain ; ; ; rdfs:comment "Valve positioner (B). " . a rdf:Property; ; rdfs:label "c"@en; rdfs:domain ; ; ; rdfs:comment "Valve positioner (C). " . ; rdfs:label "tf"@en; rdfs:domain ; ; ; a rdf:Property; rdfs:comment "Fuel system time constant (Tf) (>= 0)." . a rdf:Property; ; rdfs:label "kf"@en; rdfs:domain ; ; ; rdfs:comment "Fuel system feedback (Kf)." . a rdf:Property; ; rdfs:label "k5"@en; rdfs:domain ; ; ; rdfs:comment "Gain of radiation shield (K5)." . a rdf:Property; ; rdfs:label "k4"@en; rdfs:domain ; ; ; rdfs:comment "Gain of radiation shield (K4)." . a rdf:Property; ; rdfs:label "t3"@en; rdfs:domain ; ; ; rdfs:comment "Radiation shield time constant (T3) (>= 0)." . a rdf:Property; ; rdfs:label "t4"@en; rdfs:domain ; ; ; rdfs:comment "Thermocouple time constant (T4) (>= 0)." . a rdf:Property; ; rdfs:label "tt"@en; rdfs:domain ; ; ; rdfs:comment "Temperature controller integration rate (Tt) (>= 0)." . a rdf:Property; ; rdfs:label "t5"@en; rdfs:domain ; ; ; rdfs:comment "Temperature control time constant (T5) (>= 0)." . a rdf:Property; ; rdfs:label "af1"@en; rdfs:domain ; ; ; rdfs:comment "Exhaust temperature parameter (Af1)." . a rdf:Property; ; rdfs:label "bf1"@en; rdfs:domain ; ; ; rdfs:comment "(Bf1). Bf1 = E(1-w) where E (speed sensitivity coefficient) is 0,55 to 0,65 x Tr." . a rdf:Property; ; rdfs:label "af2"@en; rdfs:domain ; ; ; rdfs:comment "Coefficient equal to 0,5(1-speed) (Af2)." . a rdf:Property; ; rdfs:label "bf2"@en; rdfs:domain ; ; ; rdfs:comment "Turbine torque coefficient Khhv (depends on heating value of fuel stream in combustion chamber) (Bf2)." . a rdf:Property; ; rdfs:label "cf2"@en; rdfs:domain ; ; ; rdfs:comment "Coefficient defining fuel flow where power output is 0 % (Cf2). Synchronous but no output. Typically 0,23 x Khhv (23 % fuel flow)." . a rdf:Property; ; rdfs:label "tr"@en; rdfs:domain ; ; ; rdfs:comment "Rated temperature (Tr)." . a rdf:Property; ; rdfs:label "k6"@en; rdfs:domain ; ; ; rdfs:comment "Minimum fuel flow (K6). " . a rdf:Property; ; rdfs:label "tc"@en; rdfs:domain ; ; ; rdfs:comment "Temperature control (Tc)." . a rdf:Property; ; rdfs:label "td"@en; rdfs:domain ; ; ; rdfs:comment "Power transducer time constant (Td) (>= 0)." . a rdfs:Class; rdfs:label "GovHydro1"@en; rdfs:subClassOf ; rdfs:comment "Basic hydro turbine governor."; ; . a rdf:Property; ; rdfs:label "mwbase"@en; rdfs:domain ; ; ; rdfs:comment "Base for power values (MWbase) (> 0). Unit = MW." . a rdf:Property; ; rdfs:label "rperm"@en; rdfs:domain ; ; ; rdfs:comment "Permanent droop (R) (> 0). Typical value = 0,04." . a rdf:Property; ; rdfs:label "rtemp"@en; rdfs:domain ; ; ; rdfs:comment "Temporary droop (r) (> GovHydro1.rperm). Typical value = 0,3." . a rdf:Property; ; rdfs:label "tr"@en; rdfs:domain ; ; ; rdfs:comment "Washout time constant (Tr) (> 0). Typical value = 5." . a rdf:Property; ; rdfs:label "tf"@en; rdfs:domain ; ; ; rdfs:comment "Filter time constant (Tf) (> 0). Typical value = 0,05." . a rdf:Property; ; rdfs:label "tg"@en; rdfs:domain ; ; ; rdfs:comment "Gate servo time constant (Tg) (> 0). Typical value = 0,5." . a rdf:Property; ; rdfs:label "velm"@en; rdfs:domain ; ; ; rdfs:comment "Maximum gate velocity (Vlem) (> 0). Typical value = 0,2." . a rdf:Property; ; rdfs:label "gmax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum gate opening (Gmax) (> 0 and > GovHydro.gmin). Typical value = 1." . a rdf:Property; ; rdfs:label "gmin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum gate opening (Gmin) (>= 0 and < GovHydro1.gmax). Typical value = 0." . a rdf:Property; ; rdfs:label "tw"@en; rdfs:domain ; ; ; rdfs:comment "Water inertia time constant (Tw) (> 0). Typical value = 1." . a rdf:Property; ; rdfs:label "at"@en; rdfs:domain ; ; ; rdfs:comment "Turbine gain (At) (> 0). Typical value = 1,2." . a rdf:Property; ; rdfs:label "dturb"@en; rdfs:domain ; ; ; rdfs:comment "Turbine damping factor (Dturb) (>= 0). Typical value = 0,5." . a rdf:Property; ; rdfs:label "qnl"@en; rdfs:domain ; ; ; rdfs:comment "No-load flow at nominal head (qnl) (>= 0). Typical value = 0,08." . a rdf:Property; ; rdfs:label "hdam"@en; rdfs:domain ; ; ; rdfs:comment "Turbine nominal head (hdam). Typical value = 1." . a rdfs:Class; rdfs:label "GovHydro2"@en; rdfs:subClassOf ; rdfs:comment "IEEE hydro turbine governor with straightforward penstock configuration and hydraulic-dashpot governor."; ; . a rdf:Property; ; rdfs:label "mwbase"@en; rdfs:domain ; ; ; rdfs:comment "Base for power values (MWbase) (> 0). Unit = MW." . a rdf:Property; ; rdfs:label "tg"@en; rdfs:domain ; ; ; rdfs:comment "Gate servo time constant (Tg) (> 0). Typical value = 0,5." . a rdf:Property; ; rdfs:label "tp"@en; rdfs:domain ; ; ; rdfs:comment "Pilot servo valve time constant (Tp) (>= 0). Typical value = 0,03." . a rdf:Property; ; rdfs:label "uo"@en; rdfs:domain ; ; ; rdfs:comment "Maximum gate opening velocity (Uo). Unit = PU / s. Typical value = 0,1." . a rdf:Property; ; rdfs:label "uc"@en; rdfs:domain ; ; ; rdfs:comment "Maximum gate closing velocity (Uc) (< 0). Unit = PU / s. Typical value = -0,1." . a rdf:Property; ; rdfs:label "pmax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum gate opening (Pmax) (> GovHydro2.pmin). Typical value = 1." . a rdf:Property; ; rdfs:label "pmin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum gate opening (Pmin) (< GovHydro2.pmax). Typical value = 0." . a rdf:Property; ; rdfs:label "rperm"@en; rdfs:domain ; ; ; rdfs:comment "Permanent droop (Rperm). Typical value = 0,05." . a rdf:Property; ; rdfs:label "rtemp"@en; rdfs:domain ; ; ; rdfs:comment "Temporary droop (Rtemp). Typical value = 0,5." . a rdf:Property; ; rdfs:label "tr"@en; rdfs:domain ; ; ; rdfs:comment "Dashpot time constant (Tr) (>= 0). Typical value = 12." . a rdf:Property; ; rdfs:label "tw"@en; rdfs:domain ; ; ; rdfs:comment "Water inertia time constant (Tw) (>= 0). Typical value = 2." . a rdf:Property; ; rdfs:label "kturb"@en; rdfs:domain ; ; ; rdfs:comment "Turbine gain (Kturb). Typical value = 1." . a rdf:Property; ; rdfs:label "aturb"@en; rdfs:domain ; ; ; rdfs:comment "Turbine numerator multiplier (Aturb). Typical value = -1." . a rdf:Property; ; rdfs:label "bturb"@en; rdfs:domain ; ; ; rdfs:comment "Turbine denominator multiplier (Bturb) (> 0). Typical value = 0,5." . a rdf:Property; ; rdfs:label "db1"@en; rdfs:domain ; ; ; rdfs:comment "Intentional deadband width (db1). Unit = Hz. Typical value = 0." . a rdf:Property; ; rdfs:label "eps"@en; rdfs:domain ; ; ; rdfs:comment "Intentional db hysteresis (eps). Unit = Hz. Typical value = 0." . a rdf:Property; ; rdfs:label "db2"@en; rdfs:domain ; ; ; rdfs:comment "Unintentional deadband (db2). Unit = MW. Typical value = 0." . a rdf:Property; ; rdfs:label "gv1"@en; rdfs:domain ; ; ; rdfs:comment "Nonlinear gain point 1, PU gv (Gv1). Typical value = 0." . a rdf:Property; ; rdfs:label "pgv1"@en; rdfs:domain ; ; ; rdfs:comment "Nonlinear gain point 1, PU power (Pgv1). Typical value = 0." . a rdf:Property; ; rdfs:label "gv2"@en; rdfs:domain ; ; ; rdfs:comment "Nonlinear gain point 2, PU gv (Gv2). Typical value = 0." . a rdf:Property; ; rdfs:label "pgv2"@en; rdfs:domain ; ; ; rdfs:comment "Nonlinear gain point 2, PU power (Pgv2). Typical value = 0." . a rdf:Property; ; rdfs:label "gv3"@en; rdfs:domain ; ; ; rdfs:comment "Nonlinear gain point 3, PU gv (Gv3). Typical value = 0." . a rdf:Property; ; rdfs:label "pgv3"@en; rdfs:domain ; ; ; rdfs:comment "Nonlinear gain point 3, PU power (Pgv3). Typical value = 0." . a rdf:Property; ; rdfs:label "gv4"@en; rdfs:domain ; ; ; rdfs:comment "Nonlinear gain point 4, PU gv (Gv4). Typical value = 0." . a rdf:Property; ; rdfs:label "pgv4"@en; rdfs:domain ; ; ; rdfs:comment "Nonlinear gain point 4, PU power (Pgv4). Typical value = 0." . a rdf:Property; ; rdfs:label "gv5"@en; rdfs:domain ; ; ; rdfs:comment "Nonlinear gain point 5, PU gv (Gv5). Typical value = 0." . a rdf:Property; ; rdfs:label "pgv5"@en; rdfs:domain ; ; ; rdfs:comment "Nonlinear gain point 5, PU power (Pgv5). Typical value = 0." . a rdf:Property; ; rdfs:label "gv6"@en; rdfs:domain ; ; ; rdfs:comment "Nonlinear gain point 6, PU gv (Gv6). Typical value = 0." . a rdf:Property; ; rdfs:label "pgv6"@en; rdfs:domain ; ; ; rdfs:comment "Nonlinear gain point 6, PU power (Pgv6). Typical value = 0." . a rdfs:Class; rdfs:label "GovHydro3"@en; rdfs:subClassOf ; rdfs:comment "Modified IEEE hydro governor-turbine. This model differs from that defined in the IEEE modelling guideline paper in that the limits on gate position and velocity do not permit \"wind up\" of the upstream signals."; ; . a rdf:Property; ; rdfs:label "mwbase"@en; rdfs:domain ; ; ; rdfs:comment "Base for power values (MWbase) (> 0). Unit = MW." . a rdf:Property; ; rdfs:label "pmax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum gate opening, PU of MWbase (Pmax) (> GovHydro3.pmin). Typical value = 1." . a rdf:Property; ; rdfs:label "pmin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum gate opening, PU of MWbase (Pmin) (< GovHydro3.pmax). Typical value = 0." . a rdf:Property; ; rdfs:label "governorControl"@en; rdfs:domain ; ; ; rdfs:comment """Governor control flag (Cflag). true = PID control is active false = double derivative control is active. Typical value = true.""" . a rdf:Property; ; rdfs:label "rgate"@en; rdfs:domain ; ; ; rdfs:comment "Steady-state droop, PU, for governor output feedback (Rgate). Typical value = 0." . a rdf:Property; ; rdfs:label "relec"@en; rdfs:domain ; ; ; rdfs:comment "Steady-state droop, PU, for electrical power feedback (Relec). Typical value = 0,05." . a rdf:Property; ; rdfs:label "td"@en; rdfs:domain ; ; ; rdfs:comment "Input filter time constant (Td) (>= 0). Typical value = 0,05." . a rdf:Property; ; rdfs:label "tf"@en; rdfs:domain ; ; ; rdfs:comment "Washout time constant (Tf) (>= 0). Typical value = 0,1." . a rdf:Property; ; rdfs:label "tp"@en; rdfs:domain ; ; ; rdfs:comment "Gate servo time constant (Tp) (>= 0). Typical value = 0,05." . a rdf:Property; ; rdfs:label "velop"@en; rdfs:domain ; ; ; rdfs:comment "Maximum gate opening velocity (Velop). Unit = PU / s. Typical value = 0,2." . a rdf:Property; ; rdfs:label "velcl"@en; rdfs:domain ; ; ; rdfs:comment "Maximum gate closing velocity (Velcl). Unit = PU / s. Typical value = -0,2." . a rdf:Property; ; rdfs:label "k1"@en; rdfs:domain ; ; ; rdfs:comment "Derivative gain (K1). Typical value = 0,01." . a rdf:Property; ; rdfs:label "k2"@en; rdfs:domain ; ; ; rdfs:comment "Double derivative gain, if Cflag = -1 (K2). Typical value = 2,5." . a rdf:Property; ; rdfs:label "ki"@en; rdfs:domain ; ; ; rdfs:comment "Integral gain (Ki). Typical value = 0,5." . a rdf:Property; ; rdfs:label "kg"@en; rdfs:domain ; ; ; rdfs:comment "Gate servo gain (Kg). Typical value = 2." . a rdf:Property; ; rdfs:label "tt"@en; rdfs:domain ; ; ; rdfs:comment "Power feedback time constant (Tt) (>= 0). Typical value = 0,2." . a rdf:Property; ; rdfs:label "db1"@en; rdfs:domain ; ; ; rdfs:comment "Intentional dead-band width (db1). Unit = Hz. Typical value = 0." . a rdf:Property; ; rdfs:label "eps"@en; rdfs:domain ; ; ; rdfs:comment "Intentional db hysteresis (eps). Unit = Hz. Typical value = 0." . a rdf:Property; ; rdfs:label "db2"@en; rdfs:domain ; ; ; rdfs:comment "Unintentional dead-band (db2). Unit = MW. Typical value = 0." . a rdf:Property; ; rdfs:label "tw"@en; rdfs:domain ; ; ; rdfs:comment "Water inertia time constant (Tw) (>= 0). If = 0, block is bypassed. Typical value = 1." . a rdf:Property; ; rdfs:label "at"@en; rdfs:domain ; ; ; rdfs:comment "Turbine gain (At) (>0). Typical value = 1,2." . a rdf:Property; ; rdfs:label "dturb"@en; rdfs:domain ; ; ; rdfs:comment "Turbine damping factor (Dturb). Typical value = 0,2." . a rdf:Property; ; rdfs:label "qnl"@en; rdfs:domain ; ; ; rdfs:comment "No-load turbine flow at nominal head (Qnl). Typical value = 0,08." . a rdf:Property; ; rdfs:label "h0"@en; rdfs:domain ; ; ; rdfs:comment "Turbine nominal head (H0). Typical value = 1." . a rdf:Property; ; rdfs:label "gv1"@en; rdfs:domain ; ; ; rdfs:comment "Nonlinear gain point 1, PU gv (Gv1). Typical value = 0." . a rdf:Property; ; rdfs:label "pgv1"@en; rdfs:domain ; ; ; rdfs:comment "Nonlinear gain point 1, PU power (Pgv1). Typical value = 0." . a rdf:Property; ; rdfs:label "gv2"@en; rdfs:domain ; ; ; rdfs:comment "Nonlinear gain point 2, PU gv (Gv2). Typical value = 0." . a rdf:Property; ; rdfs:label "pgv2"@en; rdfs:domain ; ; ; rdfs:comment "Nonlinear gain point 2, PU power (Pgv2). Typical value = 0." . a rdf:Property; ; rdfs:label "gv3"@en; rdfs:domain ; ; ; rdfs:comment "Nonlinear gain point 3, PU gv (Gv3). Typical value = 0." . a rdf:Property; ; rdfs:label "pgv3"@en; rdfs:domain ; ; ; rdfs:comment "Nonlinear gain point 3, PU power (Pgv3). Typical value = 0." . a rdf:Property; ; rdfs:label "gv4"@en; rdfs:domain ; ; ; rdfs:comment "Nonlinear gain point 4, PU gv (Gv4). Typical value = 0." . a rdf:Property; ; rdfs:label "pgv4"@en; rdfs:domain ; ; ; rdfs:comment "Nonlinear gain point 4, PU power (Pgv4). Typical value = 0." . a rdf:Property; ; rdfs:label "gv5"@en; rdfs:domain ; ; ; rdfs:comment "Nonlinear gain point 5, PU gv (Gv5). Typical value = 0." . a rdf:Property; ; rdfs:label "pgv5"@en; rdfs:domain ; ; ; rdfs:comment "Nonlinear gain point 5, PU power (Pgv5). Typical value = 0." . a rdf:Property; ; rdfs:label "gv6"@en; rdfs:domain ; ; ; rdfs:comment "Nonlinear gain point 6, PU gv (Gv6). Typical value = 0." . a rdf:Property; ; rdfs:label "pgv6"@en; rdfs:domain ; ; ; rdfs:comment "Nonlinear gain point 6, PU power (Pgv6). Typical value = 0." . a rdfs:Class; rdfs:label "GovHydro4"@en; rdfs:subClassOf ; rdfs:comment "Hydro turbine and governor. Represents plants with straight-forward penstock configurations and hydraulic governors of the traditional 'dashpot' type. This model can be used to represent simple, Francis/Pelton or Kaplan turbines."; ; . a rdf:Property; ; rdfs:label "mwbase"@en; rdfs:domain ; ; ; rdfs:comment "Base for power values (MWbase) (> 0). Unit = MW." . a rdf:Property; ; rdfs:label "tg"@en; rdfs:domain ; ; ; rdfs:comment "Gate servo time constant (Tg) (> 0). Typical value = 0,5." . a rdf:Property; ; rdfs:label "tp"@en; rdfs:domain ; ; ; rdfs:comment "Pilot servo time constant (Tp) (>= 0). Typical value = 0,1." . a rdf:Property; ; rdfs:label "uo"@en; rdfs:domain ; ; ; rdfs:comment "Max gate opening velocity (Uo). Typical value = 0,2." . a rdf:Property; ; rdfs:label "uc"@en; rdfs:domain ; ; ; rdfs:comment "Max gate closing velocity (Uc). Typical value = 0,2." . a rdf:Property; ; rdfs:label "gmax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum gate opening, PU of MWbase (Gmax) (> GovHydro4.gmin). Typical value = 1." . a rdf:Property; ; rdfs:label "gmin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum gate opening, PU of MWbase (Gmin) (< GovHydro4.gmax). Typical value = 0." . a rdf:Property; ; rdfs:label "rperm"@en; rdfs:domain ; ; ; rdfs:comment "Permanent droop (Rperm) (>= 0). Typical value = 0,05." . a rdf:Property; ; rdfs:label "rtemp"@en; rdfs:domain ; ; ; rdfs:comment "Temporary droop (Rtemp) (>= 0). Typical value = 0,3." . a rdf:Property; ; rdfs:label "tr"@en; rdfs:domain ; ; ; rdfs:comment "Dashpot time constant (Tr) (>= 0). Typical value = 5." . a rdf:Property; ; rdfs:label "tw"@en; rdfs:domain ; ; ; rdfs:comment "Water inertia time constant (Tw) (> 0). Typical value = 1." . a rdf:Property; ; rdfs:label "at"@en; rdfs:domain ; ; ; rdfs:comment "Turbine gain (At). Typical value = 1,2." . a rdf:Property; ; rdfs:label "dturb"@en; rdfs:domain ; ; ; rdfs:comment "Turbine damping factor (Dturb). Unit = delta P (PU of MWbase) / delta speed (PU). Typical value for simple = 0,5, Francis/Pelton = 1,1, Kaplan = 1,1." . a rdf:Property; ; rdfs:label "hdam"@en; rdfs:domain ; ; ; rdfs:comment "Head available at dam (hdam). Typical value = 1." . a rdf:Property; ; rdfs:label "qnl"@en; rdfs:domain ; ; ; rdfs:comment """No-load flow at nominal head (Qnl). Typical value for simple = 0,08, Francis/Pelton = 0, Kaplan = 0.""" . a rdf:Property; ; rdfs:label "db1"@en; rdfs:domain ; ; ; rdfs:comment "Intentional deadband width (db1). Unit = Hz. Typical value = 0." . a rdf:Property; ; rdfs:label "eps"@en; rdfs:domain ; ; ; rdfs:comment "Intentional db hysteresis (eps). Unit = Hz. Typical value = 0." . a rdf:Property; ; rdfs:label "db2"@en; rdfs:domain ; ; ; rdfs:comment "Unintentional dead-band (db2). Unit = MW. Typical value = 0." . a rdf:Property; ; rdfs:label "gv0"@en; rdfs:domain ; ; ; rdfs:comment "Nonlinear gain point 0, PU gv (Gv0) (= 0 for simple). Typical for Francis/Pelton = 0,1, Kaplan = 0,1." . a rdf:Property; ; rdfs:label "pgv0"@en; rdfs:domain ; ; ; rdfs:comment "Nonlinear gain point 0, PU power (Pgv0) (= 0 for simple). Typical value = 0." . a rdf:Property; ; rdfs:label "gv1"@en; rdfs:domain ; ; ; rdfs:comment "Nonlinear gain point 1, PU gv (Gv1) (= 0 for simple, > GovHydro4.gv0 for Francis/Pelton and Kaplan). Typical value for Francis/Pelton = 0,4, Kaplan = 0,4." . a rdf:Property; ; rdfs:label "pgv1"@en; rdfs:domain ; ; ; rdfs:comment """Nonlinear gain point 1, PU power (Pgv1) (= 0 for simple). Typical value for Francis/Pelton = 0,42, Kaplan = 0,35.""" . a rdf:Property; ; rdfs:label "gv2"@en; rdfs:domain ; ; ; rdfs:comment "Nonlinear gain point 2, PU gv (Gv2) (= 0 for simple, > GovHydro4.gv1 for Francis/Pelton and Kaplan). Typical value for Francis/Pelton = 0,5, Kaplan = 0,5." . a rdf:Property; ; rdfs:label "pgv2"@en; rdfs:domain ; ; ; rdfs:comment """Nonlinear gain point 2, PU power (Pgv2) (= 0 for simple). Typical value for Francis/Pelton = 0,56, Kaplan = 0,468.""" . a rdf:Property; ; rdfs:label "gv3"@en; rdfs:domain ; ; ; rdfs:comment "Nonlinear gain point 3, PU gv (Gv3) (= 0 for simple, > GovHydro4.gv2 for Francis/Pelton and Kaplan). Typical value for Francis/Pelton = 0,7, Kaplan = 0,7." . a rdf:Property; ; rdfs:label "pgv3"@en; rdfs:domain ; ; ; rdfs:comment """Nonlinear gain point 3, PU power (Pgv3) (= 0 for simple). Typical value for Francis/Pelton = 0,8, Kaplan = 0,796.""" . a rdf:Property; ; rdfs:label "gv4"@en; rdfs:domain ; ; ; rdfs:comment "Nonlinear gain point 4, PU gv (Gv4) (= 0 for simple, > GovHydro4.gv3 for Francis/Pelton and Kaplan). Typical value for Francis/Pelton = 0,8, Kaplan = 0,8." . a rdf:Property; ; rdfs:label "pgv4"@en; rdfs:domain ; ; ; rdfs:comment """Nonlinear gain point 4, PU power (Pgv4) (= 0 for simple). Typical value for Francis/Pelton = 0,9, Kaplan = 0,917.""" . a rdf:Property; ; rdfs:label "gv5"@en; rdfs:domain ; ; ; rdfs:comment "Nonlinear gain point 5, PU gv (Gv5) (= 0 for simple, < 1 and > GovHydro4.gv4 for Francis/Pelton and Kaplan). Typical value for Francis/Pelton = 0,9, Kaplan = 0,9." . a rdf:Property; ; rdfs:label "pgv5"@en; rdfs:domain ; ; ; rdfs:comment """Nonlinear gain point 5, PU power (Pgv5) (= 0 for simple). Typical value for Francis/Pelton = 0,97, Kaplan = 0,99.""" . a rdf:Property; ; rdfs:label "bgv0"@en; rdfs:domain ; ; ; rdfs:comment "Kaplan blade servo point 0 (Bgv0) (= 0 for simple, = 0 for Francis/Pelton). Typical value for Kaplan = 0." . a rdf:Property; ; rdfs:label "bgv1"@en; rdfs:domain ; ; ; rdfs:comment "Kaplan blade servo point 1 (Bgv1) (= 0 for simple, = 0 for Francis/Pelton). Typical value for Kaplan = 0." . a rdf:Property; ; rdfs:label "bgv2"@en; rdfs:domain ; ; ; rdfs:comment "Kaplan blade servo point 2 (Bgv2) (= 0 for simple, = 0 for Francis/Pelton). Typical value for Kaplan = 0,1." . a rdf:Property; ; rdfs:label "bgv3"@en; rdfs:domain ; ; ; rdfs:comment "Kaplan blade servo point 3 (Bgv3) (= 0 for simple, = 0 for Francis/Pelton). Typical value for Kaplan = 0,667." . a rdf:Property; ; rdfs:label "bgv4"@en; rdfs:domain ; ; ; rdfs:comment "Kaplan blade servo point 4 (Bgv4) (= 0 for simple, = 0 for Francis/Pelton). Typical value for Kaplan = 0,9." . a rdf:Property; ; rdfs:label "bgv5"@en; rdfs:domain ; ; ; rdfs:comment "Kaplan blade servo point 5 (Bgv5) (= 0 for simple, = 0 for Francis/Pelton). Typical value for Kaplan = 1." . a rdf:Property; ; rdfs:label "bmax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum blade adjustment factor (Bmax) (= 0 for simple, = 0 for Francis/Pelton). Typical value for Kaplan = 1,1276." . a rdf:Property; ; rdfs:label "tblade"@en; rdfs:domain ; ; ; rdfs:comment "Blade servo time constant (Tblade) (>= 0). Typical value = 100." . a rdf:Property; ; rdfs:label "model"@en; rdfs:domain ; rdfs:range ; ; rdfs:comment "The kind of model being represented (simple, Francis/Pelton or Kaplan)." . a rdfs:Class; rdfs:label "GovHydroDD"@en; rdfs:subClassOf ; rdfs:comment "Double derivative hydro governor and turbine."; ; . a rdf:Property; ; rdfs:label "mwbase"@en; rdfs:domain ; ; ; rdfs:comment "Base for power values (MWbase) (>0). Unit = MW." . a rdf:Property; ; rdfs:label "pmax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum gate opening, PU of MWbase (Pmax) (> GovHydroDD.pmin). Typical value = 1." . a rdf:Property; ; rdfs:label "pmin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum gate opening, PU of MWbase (Pmin) (> GovHydroDD.pmax). Typical value = 0." . a rdf:Property; ; rdfs:label "r"@en; rdfs:domain ; ; ; rdfs:comment "Steady state droop (R). Typical value = 0,05." . ; rdfs:label "td"@en; a rdf:Property; rdfs:domain ; ; ; rdfs:comment "Input filter time constant (Td) (>= 0). If = 0, block is bypassed. Typical value = 0." . a rdf:Property; ; rdfs:label "tf"@en; rdfs:domain ; ; ; rdfs:comment "Washout time constant (Tf) (>= 0). Typical value = 0,1." . a rdf:Property; ; rdfs:label "tp"@en; rdfs:domain ; ; ; rdfs:comment "Gate servo time constant (Tp) (>= 0). If = 0, block is bypassed. Typical value = 0,35." . a rdf:Property; ; rdfs:label "velop"@en; rdfs:domain ; ; ; rdfs:comment "Maximum gate opening velocity (Velop). Unit = PU / s. Typical value = 0,09." . a rdf:Property; ; rdfs:label "velcl"@en; rdfs:domain ; ; ; rdfs:comment "Maximum gate closing velocity (Velcl). Unit = PU / s. Typical value = -0,14." . a rdf:Property; ; rdfs:label "k1"@en; rdfs:domain ; ; ; rdfs:comment "Single derivative gain (K1). Typical value = 3,6." . a rdf:Property; ; rdfs:label "k2"@en; rdfs:domain ; ; ; rdfs:comment "Double derivative gain (K2). Typical value = 0,2." . a rdf:Property; ; rdfs:label "ki"@en; rdfs:domain ; ; ; rdfs:comment "Integral gain (Ki). Typical value = 1." . a rdf:Property; ; rdfs:label "kg"@en; rdfs:domain ; ; ; rdfs:comment "Gate servo gain (Kg). Typical value = 3." . a rdf:Property; ; rdfs:label "tturb"@en; rdfs:domain ; ; ; rdfs:comment "Turbine time constant (Tturb) (>= 0). See parameter detail 3. Typical value = 0,8." . a rdf:Property; ; rdfs:label "aturb"@en; rdfs:domain ; ; ; rdfs:comment "Turbine numerator multiplier (Aturb) (see parameter detail 3). Typical value = -1." . a rdf:Property; ; rdfs:label "bturb"@en; rdfs:domain ; ; ; rdfs:comment "Turbine denominator multiplier (Bturb) (see parameter detail 3). Typical value = 0,5." . a rdf:Property; ; rdfs:label "tt"@en; rdfs:domain ; ; ; rdfs:comment "Power feedback time constant (Tt) (>= 0). If = 0, block is bypassed. Typical value = 0,02." . a rdf:Property; ; rdfs:label "db1"@en; rdfs:domain ; ; ; rdfs:comment "Intentional dead-band width (db1). Unit = Hz. Typical value = 0." . a rdf:Property; ; rdfs:label "eps"@en; rdfs:domain ; ; ; rdfs:comment "Intentional db hysteresis (eps). Unit = Hz. Typical value = 0." . a rdf:Property; ; rdfs:label "db2"@en; rdfs:domain ; ; ; rdfs:comment "Unintentional dead-band (db2). Unit = MW. Typical value = 0." . a rdf:Property; ; rdfs:label "gv1"@en; rdfs:domain ; ; ; rdfs:comment "Nonlinear gain point 1, PU gv (Gv1). Typical value = 0." . a rdf:Property; ; rdfs:label "pgv1"@en; rdfs:domain ; ; ; rdfs:comment "Nonlinear gain point 1, PU power (Pgv1). Typical value = 0." . a rdf:Property; ; rdfs:label "gv2"@en; rdfs:domain ; ; ; rdfs:comment "Nonlinear gain point 2, PU gv (Gv2). Typical value = 0." . a rdf:Property; ; rdfs:label "pgv2"@en; rdfs:domain ; ; ; rdfs:comment "Nonlinear gain point 2, PU power (Pgv2). Typical value = 0." . a rdf:Property; ; rdfs:label "gv3"@en; rdfs:domain ; ; ; rdfs:comment "Nonlinear gain point 3, PU gv (Gv3). Typical value = 0." . a rdf:Property; ; rdfs:label "pgv3"@en; rdfs:domain ; ; ; rdfs:comment "Nonlinear gain point 3, PU power (Pgv3). Typical value = 0." . a rdf:Property; ; rdfs:label "gv4"@en; rdfs:domain ; ; ; rdfs:comment "Nonlinear gain point 4, PU gv (Gv4). Typical value = 0." . a rdf:Property; ; rdfs:label "pgv4"@en; rdfs:domain ; ; ; rdfs:comment "Nonlinear gain point 4, PU power (Pgv4). Typical value = 0." . a rdf:Property; ; rdfs:label "gv5"@en; rdfs:domain ; ; ; rdfs:comment "Nonlinear gain point 5, PU gv (Gv5). Typical value = 0." . a rdf:Property; ; rdfs:label "pgv5"@en; rdfs:domain ; ; ; rdfs:comment "Nonlinear gain point 5, PU power (Pgv5). Typical value = 0." . a rdf:Property; ; rdfs:label "gv6"@en; rdfs:domain ; ; ; rdfs:comment "Nonlinear gain point 6, PU gv (Gv6). Typical value = 0." . a rdf:Property; ; rdfs:label "pgv6"@en; rdfs:domain ; ; ; rdfs:comment "Nonlinear gain point 6, PU power (Pgv6). Typical value = 0." . a rdf:Property; ; rdfs:label "gmax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum gate opening (Gmax) (> GovHydroDD.gmin). Typical value = 0." . a rdf:Property; ; rdfs:label "gmin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum gate opening (Gmin) (< GovHydroDD.gmax). Typical value = 0." . a rdf:Property; ; rdfs:label "inputSignal"@en; rdfs:domain ; ; ; rdfs:comment """Input signal switch (Flag). true = Pe input is used false = feedback is received from CV. Flag is normally dependent on Tt. If Tt is zero, Flag is set to false. If Tt is not zero, Flag is set to true. Typical value = true.""" . a rdfs:Class; rdfs:label "GovHydroFrancis"@en; rdfs:subClassOf ; rdfs:comment """Detailed hydro unit - Francis model. This model can be used to represent three types of governors. A schematic of the hydraulic system of detailed hydro unit models, such as Francis and Pelton, is provided in the DetailedHydroModelHydraulicSystem diagram."""; ; . a rdf:Property; ; rdfs:label "am"@en; rdfs:domain ; ; ; rdfs:comment "Opening section SEFF at the maximum efficiency (Am). Typical value = 0,7." . a rdf:Property; ; rdfs:label "av0"@en; rdfs:domain ; ; ; rdfs:comment "Area of the surge tank (AV0). Unit = m2. Typical value = 30." . a rdf:Property; ; rdfs:label "av1"@en; rdfs:domain ; ; ; rdfs:comment "Area of the compensation tank (AV1). Unit = m2. Typical value = 700." . a rdf:Property; ; rdfs:label "bp"@en; rdfs:domain ; ; ; rdfs:comment "Droop (Bp). Typical value = 0,05." . a rdf:Property; ; rdfs:label "db1"@en; rdfs:domain ; ; ; rdfs:comment "Intentional dead-band width (DB1). Unit = Hz. Typical value = 0." . a rdf:Property; ; rdfs:label "etamax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum efficiency (EtaMax). Typical value = 1,05." . a rdf:Property; ; rdfs:label "governorControl"@en; rdfs:domain ; rdfs:range ; ; rdfs:comment "Governor control flag (Cflag). Typical value = mechanicHydrolicTachoAccelerator." . a rdf:Property; ; rdfs:label "h1"@en; rdfs:domain ; ; ; rdfs:comment "Head of compensation chamber water level with respect to the level of penstock (H1). Unit = km. Typical value = 0,004." . a rdf:Property; ; rdfs:label "h2"@en; rdfs:domain ; ; ; rdfs:comment "Head of surge tank water level with respect to the level of penstock (H2). Unit = km. Typical value = 0,040." . a rdf:Property; ; rdfs:label "hn"@en; rdfs:domain ; ; ; rdfs:comment "Rated hydraulic head (Hn). Unit = km. Typical value = 0,250." . a rdf:Property; ; rdfs:label "kc"@en; rdfs:domain ; ; ; rdfs:comment "Penstock loss coefficient (due to friction) (Kc). Typical value = 0,025." . a rdf:Property; ; rdfs:label "kg"@en; rdfs:domain ; ; ; rdfs:comment "Water tunnel and surge chamber loss coefficient (due to friction) (Kg). Typical value = 0,025." . a rdf:Property; ; rdfs:label "kt"@en; rdfs:domain ; ; ; rdfs:comment "Washout gain (Kt). Typical value = 0,25." . a rdf:Property; ; rdfs:label "qc0"@en; rdfs:domain ; ; ; rdfs:comment "No-load turbine flow at nominal head (Qc0). Typical value = 0,1." . a rdf:Property; ; rdfs:label "qn"@en; rdfs:domain ; ; ; rdfs:comment "Rated flow (Qn). Unit = m3/s. Typical value = 250." . a rdf:Property; ; rdfs:label "ta"@en; rdfs:domain ; ; ; rdfs:comment "Derivative gain (Ta) (>= 0). Typical value = 3." . a rdf:Property; ; rdfs:label "td"@en; rdfs:domain ; ; ; rdfs:comment "Washout time constant (Td) (>= 0). Typical value = 6." . a rdf:Property; ; rdfs:label "ts"@en; rdfs:domain ; ; ; rdfs:comment "Gate servo time constant (Ts) (>= 0). Typical value = 0,5." . a rdf:Property; ; rdfs:label "twnc"@en; rdfs:domain ; ; ; rdfs:comment "Water inertia time constant (Twnc) (>= 0). Typical value = 1." . a rdf:Property; ; rdfs:label "twng"@en; rdfs:domain ; ; ; rdfs:comment "Water tunnel and surge chamber inertia time constant (Twng) (>= 0). Typical value = 3." . a rdf:Property; ; rdfs:label "tx"@en; rdfs:domain ; ; ; rdfs:comment "Derivative feedback gain (Tx) (>= 0). Typical value = 1." . a rdf:Property; ; rdfs:label "va"@en; rdfs:domain ; ; ; rdfs:comment "Maximum gate opening velocity (Va). Unit = PU / s. Typical value = 0,06." . a rdf:Property; ; rdfs:label "valvmax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum gate opening (ValvMax) (> GovHydroFrancis.valvmin). Typical value = 1,1." . a rdf:Property; ; rdfs:label "valvmin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum gate opening (ValvMin) (< GovHydroFrancis.valvmax). Typical value = 0." . a rdf:Property; ; rdfs:label "vc"@en; rdfs:domain ; ; ; rdfs:comment "Maximum gate closing velocity (Vc). Unit = PU / s. Typical value = -0,06." . a rdf:Property; ; rdfs:label "waterTunnelSurgeChamberSimulation"@en; rdfs:domain ; ; ; rdfs:comment """Water tunnel and surge chamber simulation (Tflag). true = enable of water tunnel and surge chamber simulation false = inhibit of water tunnel and surge chamber simulation. Typical value = false.""" . a rdf:Property; ; rdfs:label "zsfc"@en; rdfs:domain ; ; ; rdfs:comment "Head of upper water level with respect to the level of penstock (Zsfc). Unit = km. Typical value = 0,025." . a rdfs:Class; rdfs:label "GovHydroPelton"@en; rdfs:subClassOf ; rdfs:comment """Detailed hydro unit - Pelton model. This model can be used to represent the dynamic related to water tunnel and surge chamber. The DetailedHydroModelHydraulicSystem diagram, located under the GovHydroFrancis class, provides a schematic of the hydraulic system of detailed hydro unit models, such as Francis and Pelton."""; ; . a rdf:Property; ; rdfs:label "av0"@en; rdfs:domain ; ; ; rdfs:comment "Area of the surge tank (AV0). Unit = m2. Typical value = 30." . a rdf:Property; ; rdfs:label "av1"@en; rdfs:domain ; ; ; rdfs:comment "Area of the compensation tank (AV1). Unit = m2. Typical value = 700." . a rdf:Property; ; rdfs:label "bp"@en; rdfs:domain ; ; ; rdfs:comment "Droop (bp). Typical value = 0,05." . a rdf:Property; ; rdfs:label "db1"@en; rdfs:domain ; ; ; rdfs:comment "Intentional dead-band width (DB1). Unit = Hz. Typical value = 0." . a rdf:Property; ; rdfs:label "db2"@en; rdfs:domain ; ; ; rdfs:comment "Intentional dead-band width of valve opening error (DB2). Unit = Hz. Typical value = 0,01." . a rdf:Property; ; rdfs:label "h1"@en; rdfs:domain ; ; ; rdfs:comment "Head of compensation chamber water level with respect to the level of penstock (H1). Unit = km. Typical value = 0,004." . a rdf:Property; ; rdfs:label "h2"@en; rdfs:domain ; ; ; rdfs:comment "Head of surge tank water level with respect to the level of penstock (H2). Unit = km. Typical value = 0,040." . a rdf:Property; ; rdfs:label "hn"@en; rdfs:domain ; ; ; rdfs:comment "Rated hydraulic head (Hn). Unit = km. Typical value = 0,250." . a rdf:Property; ; rdfs:label "kc"@en; rdfs:domain ; ; ; rdfs:comment "Penstock loss coefficient (due to friction) (Kc). Typical value = 0,025." . a rdf:Property; ; rdfs:label "kg"@en; rdfs:domain ; ; ; rdfs:comment "Water tunnel and surge chamber loss coefficient (due to friction) (Kg). Typical value = 0,025." . a rdf:Property; ; rdfs:label "qc0"@en; rdfs:domain ; ; ; rdfs:comment "No-load turbine flow at nominal head (Qc0). Typical value = 0,05." . a rdf:Property; ; rdfs:label "qn"@en; rdfs:domain ; ; ; rdfs:comment "Rated flow (Qn). Unit = m3/s. Typical value = 250." . a rdf:Property; ; rdfs:label "simplifiedPelton"@en; rdfs:domain ; ; ; rdfs:comment """Simplified Pelton model simulation (Sflag). true = enable of simplified Pelton model simulation false = enable of complete Pelton model simulation (non-linear gain). Typical value = true.""" . a rdf:Property; ; rdfs:label "staticCompensating"@en; rdfs:domain ; ; ; rdfs:comment """Static compensating characteristic (Cflag). It should be true if simplifiedPelton = false. true = enable of static compensating characteristic false = inhibit of static compensating characteristic. Typical value = false.""" . a rdf:Property; ; rdfs:label "ta"@en; rdfs:domain ; ; ; rdfs:comment "Derivative gain (accelerometer time constant) (Ta) (>= 0). Typical value = 3." . a rdf:Property; ; rdfs:label "ts"@en; rdfs:domain ; ; ; rdfs:comment "Gate servo time constant (Ts) (>= 0). Typical value = 0,15." . a rdf:Property; ; rdfs:label "tv"@en; rdfs:domain ; ; ; rdfs:comment "Servomotor integrator time constant (Tv) (>= 0). Typical value = 0,3." . a rdf:Property; ; rdfs:label "twnc"@en; rdfs:domain ; ; ; rdfs:comment "Water inertia time constant (Twnc) (>= 0). Typical value = 1." . a rdf:Property; ; rdfs:label "twng"@en; rdfs:domain ; ; ; rdfs:comment "Water tunnel and surge chamber inertia time constant (Twng) (>= 0). Typical value = 3." . a rdf:Property; ; rdfs:label "tx"@en; rdfs:domain ; ; ; rdfs:comment "Electronic integrator time constant (Tx) (>= 0). Typical value = 0,5." . a rdf:Property; ; rdfs:label "va"@en; rdfs:domain ; ; ; rdfs:comment "Maximum gate opening velocity (Va). Unit = PU / s. Typical value = 0,06." . a rdf:Property; ; rdfs:label "valvmax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum gate opening (ValvMax) (> GovHydroPelton.valvmin). Typical value = 1,1." . a rdf:Property; ; rdfs:label "valvmin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum gate opening (ValvMin) (< GovHydroPelton.valvmax). Typical value = 0." . a rdf:Property; ; rdfs:label "vav"@en; rdfs:domain ; ; ; rdfs:comment "Maximum servomotor valve opening velocity (Vav). Typical value = 0,1." . a rdf:Property; ; rdfs:label "vc"@en; rdfs:domain ; ; ; rdfs:comment "Maximum gate closing velocity (Vc). Unit = PU / s. Typical value = -0,06." . a rdf:Property; ; rdfs:label "vcv"@en; rdfs:domain ; ; ; rdfs:comment "Maximum servomotor valve closing velocity (Vcv). Typical value = -0,1." . a rdf:Property; ; rdfs:label "waterTunnelSurgeChamberSimulation"@en; rdfs:domain ; ; ; rdfs:comment """Water tunnel and surge chamber simulation (Tflag). true = enable of water tunnel and surge chamber simulation false = inhibit of water tunnel and surge chamber simulation. Typical value = false.""" . a rdf:Property; ; rdfs:label "zsfc"@en; rdfs:domain ; ; ; rdfs:comment "Head of upper water level with respect to the level of penstock (Zsfc). Unit = km. Typical value = 0,025." . a rdfs:Class; rdfs:label "GovHydroPID"@en; rdfs:subClassOf ; rdfs:comment "PID governor and turbine."; ; . a rdf:Property; ; rdfs:label "mwbase"@en; rdfs:domain ; ; ; rdfs:comment "Base for power values (MWbase) (> 0). Unit = MW." . a rdf:Property; ; rdfs:label "pmax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum gate opening, PU of MWbase (Pmax) (> GovHydroPID.pmin). Typical value = 1." . a rdf:Property; ; rdfs:label "pmin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum gate opening, PU of MWbase (Pmin) (< GovHydroPID.pmax). Typical value = 0." . a rdf:Property; ; rdfs:label "r"@en; rdfs:domain ; ; ; rdfs:comment "Steady state droop (R). Typical value = 0,05." . a rdf:Property; ; rdfs:label "td"@en; rdfs:domain ; ; ; rdfs:comment "Input filter time constant (Td) (>= 0). If = 0, block is bypassed. Typical value = 0." . a rdf:Property; ; rdfs:label "tf"@en; rdfs:domain ; ; ; rdfs:comment "Washout time constant (Tf) (>= 0). Typical value = 0,1." . a rdf:Property; ; rdfs:label "tp"@en; rdfs:domain ; ; ; rdfs:comment "Gate servo time constant (Tp) (>= 0). If = 0, block is bypassed. Typical value = 0,35." . a rdf:Property; ; rdfs:label "velop"@en; rdfs:domain ; ; ; rdfs:comment "Maximum gate opening velocity (Velop). Unit = PU / s. Typical value = 0,09." . a rdf:Property; ; rdfs:label "velcl"@en; rdfs:domain ; ; ; rdfs:comment "Maximum gate closing velocity (Velcl). Unit = PU / s. Typical value = -0,14." . a rdf:Property; ; rdfs:label "kd"@en; rdfs:domain ; ; ; rdfs:comment "Derivative gain (Kd). Typical value = 1,11." . a rdf:Property; ; rdfs:label "kp"@en; rdfs:domain ; ; ; rdfs:comment "Proportional gain (Kp). Typical value = 0,1." . a rdf:Property; ; rdfs:label "ki"@en; rdfs:domain ; ; ; rdfs:comment "Integral gain (Ki). Typical value = 0,36." . a rdf:Property; ; rdfs:label "kg"@en; rdfs:domain ; ; ; rdfs:comment "Gate servo gain (Kg). Typical value = 2,5." . a rdf:Property; ; rdfs:label "tturb"@en; rdfs:domain ; ; ; rdfs:comment "Turbine time constant (Tturb) (>= 0). See Parameter detail 3. Typical value = 0,8." . a rdf:Property; ; rdfs:label "aturb"@en; rdfs:domain ; ; ; rdfs:comment "Turbine numerator multiplier (Aturb) (see parameter detail 3). Typical value -1." . a rdf:Property; ; rdfs:label "bturb"@en; rdfs:domain ; ; ; rdfs:comment "Turbine denominator multiplier (Bturb) (see parameter detail 3). Typical value = 0,5." . a rdf:Property; ; rdfs:label "tt"@en; rdfs:domain ; ; ; rdfs:comment "Power feedback time constant (Tt) (>= 0). If = 0, block is bypassed. Typical value = 0,02." . a rdf:Property; ; rdfs:label "db1"@en; rdfs:domain ; ; ; rdfs:comment "Intentional dead-band width (db1). Unit = Hz. Typical value = 0." . a rdf:Property; ; rdfs:label "inputSignal"@en; rdfs:domain ; ; ; rdfs:comment """Input signal switch (Flag). true = Pe input is used false = feedback is received from CV. Flag is normally dependent on Tt. If Tt is zero, Flag is set to false. If Tt is not zero, Flag is set to true. Typical value = true.""" . a rdf:Property; ; rdfs:label "eps"@en; rdfs:domain ; ; ; rdfs:comment "Intentional db hysteresis (eps). Unit = Hz. Typical value = 0." . a rdf:Property; ; rdfs:label "db2"@en; rdfs:domain ; ; ; rdfs:comment "Unintentional dead-band (db2). Unit = MW. Typical value = 0." . a rdf:Property; ; rdfs:label "gv1"@en; rdfs:domain ; ; ; rdfs:comment "Nonlinear gain point 1, PU gv (Gv1). Typical value = 0." . a rdf:Property; ; rdfs:label "pgv1"@en; rdfs:domain ; ; ; rdfs:comment "Nonlinear gain point 1, PU power (Pgv1). Typical value = 0." . a rdf:Property; ; rdfs:label "gv2"@en; rdfs:domain ; ; ; rdfs:comment "Nonlinear gain point 2, PU gv (Gv2). Typical value = 0." . a rdf:Property; ; rdfs:label "pgv2"@en; rdfs:domain ; ; ; rdfs:comment "Nonlinear gain point 2, PU power (Pgv2). Typical value = 0." . a rdf:Property; ; rdfs:label "gv3"@en; rdfs:domain ; ; ; rdfs:comment "Nonlinear gain point 3, PU gv (Gv3). Typical value = 0." . a rdf:Property; ; rdfs:label "pgv3"@en; rdfs:domain ; ; ; rdfs:comment "Nonlinear gain point 3, PU power (Pgv3). Typical value = 0." . a rdf:Property; ; rdfs:label "gv4"@en; rdfs:domain ; ; ; rdfs:comment "Nonlinear gain point 4, PU gv (Gv4). Typical value = 0." . a rdf:Property; ; rdfs:label "pgv4"@en; rdfs:domain ; ; ; rdfs:comment "Nonlinear gain point 4, PU power (Pgv4). Typical value = 0." . a rdf:Property; ; rdfs:label "gv5"@en; rdfs:domain ; ; ; rdfs:comment "Nonlinear gain point 5, PU gv (Gv5). Typical value = 0." . a rdf:Property; ; rdfs:label "pgv5"@en; rdfs:domain ; ; ; rdfs:comment "Nonlinear gain point 5, PU power (Pgv5). Typical value = 0." . a rdf:Property; ; rdfs:label "gv6"@en; rdfs:domain ; ; ; rdfs:comment "Nonlinear gain point 6, PU gv (Gv6). Typical value = 0." . a rdf:Property; ; rdfs:label "pgv6"@en; rdfs:domain ; ; ; rdfs:comment "Nonlinear gain point 6, PU power (Pgv6). Typical value = 0." . a rdfs:Class; rdfs:label "GovHydroPID2"@en; rdfs:subClassOf ; rdfs:comment """Hydro turbine and governor. Represents plants with straightforward penstock configurations and \"three term\" electro-hydraulic governors (i.e. WoodwardTM electronic). [Footnote: Woodward electronic governors are an example of suitable products available commercially. This information is given for the convenience of users of this document and does not constitute an endorsement by IEC of these products.] """; ; . a rdf:Property; ; rdfs:label "mwbase"@en; rdfs:domain ; ; ; rdfs:comment "Base for power values (MWbase) (>0). Unit = MW." . a rdf:Property; ; rdfs:label "treg"@en; rdfs:domain ; ; ; rdfs:comment "Speed detector time constant (Treg) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "rperm"@en; rdfs:domain ; ; ; rdfs:comment "Permanent drop (Rperm). Typical value = 0." . a rdf:Property; ; rdfs:label "kp"@en; rdfs:domain ; ; ; rdfs:comment "Proportional gain (Kp). Typical value = 0." . a rdf:Property; ; rdfs:label "ki"@en; rdfs:domain ; ; ; rdfs:comment "Reset gain (Ki). Unit = PU/s. Typical value = 0." . a rdf:Property; ; rdfs:label "kd"@en; rdfs:domain ; ; ; rdfs:comment "Derivative gain (Kd). Typical value = 0." . a rdf:Property; ; rdfs:label "ta"@en; rdfs:domain ; ; ; rdfs:comment "Controller time constant (Ta) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "tb"@en; rdfs:domain ; ; ; rdfs:comment "Gate servo time constant (Tb) (> 0). " . a rdf:Property; ; rdfs:label "velmax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum gate opening velocity (Velmax) (< GovHydroPID2.velmin). Unit = PU / s. Typical value = 0." . a rdf:Property; ; rdfs:label "velmin"@en; rdfs:domain ; ; ; rdfs:comment "Maximum gate closing velocity (Velmin) (> GovHydroPID2.velmax). Unit = PU / s. Typical value = 0." . a rdf:Property; ; rdfs:label "gmax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum gate opening (Gmax) (> GovHydroPID2.gmin). Typical value = 0." . a rdf:Property; ; rdfs:label "gmin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum gate opening (Gmin) (> GovHydroPID2.gmax). Typical value = 0." . a rdf:Property; ; rdfs:label "tw"@en; rdfs:domain ; ; ; rdfs:comment "Water inertia time constant (Tw) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "d"@en; rdfs:domain ; ; ; rdfs:comment "Turbine damping factor (D). Unit = delta P / delta speed. Typical value = 0." . a rdf:Property; ; rdfs:label "g0"@en; rdfs:domain ; ; ; rdfs:comment "Gate opening at speed no load (G0). Typical value = 0." . a rdf:Property; ; rdfs:label "g1"@en; rdfs:domain ; ; ; rdfs:comment "Intermediate gate opening (G1). Typical value = 0." . a rdf:Property; ; rdfs:label "p1"@en; rdfs:domain ; ; ; rdfs:comment "Power at gate opening G1 (P1). Typical value = 0." . a rdf:Property; ; rdfs:label "g2"@en; rdfs:domain ; ; ; rdfs:comment "Intermediate gate opening (G2). Typical value = 0." . a rdf:Property; ; rdfs:label "p2"@en; rdfs:domain ; ; ; rdfs:comment "Power at gate opening G2 (P2). Typical value = 0." . a rdf:Property; ; rdfs:label "p3"@en; rdfs:domain ; ; ; rdfs:comment "Power at full opened gate (P3). Typical value = 0." . ; rdfs:label "atw"@en; rdfs:domain ; ; ; a rdf:Property; rdfs:comment "Factor multiplying Tw (Atw). Typical value = 0." . a rdf:Property; ; rdfs:label "feedbackSignal"@en; rdfs:domain ; ; ; rdfs:comment """Feedback signal type flag (Flag). true = use gate position feedback signal false = use Pe.""" . a rdfs:Class; rdfs:label "GovHydroR"@en; rdfs:subClassOf ; rdfs:comment "Fourth order lead-lag governor and hydro turbine. "; ; . a rdf:Property; ; rdfs:label "mwbase"@en; rdfs:domain ; ; ; rdfs:comment "Base for power values (MWbase) (> 0). Unit = MW." . a rdf:Property; ; rdfs:label "pmax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum gate opening, PU of MWbase (Pmax) (> GovHydroR.pmin). Typical value = 1." . a rdf:Property; ; rdfs:label "pmin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum gate opening, PU of MWbase (Pmin) (< GovHydroR.pmax). Typical value = 0." . a rdf:Property; ; rdfs:label "r"@en; rdfs:domain ; ; ; rdfs:comment "Steady-state droop (R). Typical value = 0,05." . a rdf:Property; ; rdfs:label "td"@en; rdfs:domain ; ; ; rdfs:comment "Input filter time constant (Td) (>= 0). Typical value = 0,05." . a rdf:Property; ; rdfs:label "t1"@en; rdfs:domain ; ; ; rdfs:comment "Lead time constant 1 (T1) (>= 0). Typical value = 1,5." . a rdf:Property; ; rdfs:label "t2"@en; rdfs:domain ; ; ; rdfs:comment "Lag time constant 1 (T2) (>= 0). Typical value = 0,1." . a rdf:Property; ; rdfs:label "t3"@en; rdfs:domain ; ; ; rdfs:comment "Lead time constant 2 (T3) (>= 0). Typical value = 1,5." . a rdf:Property; ; rdfs:label "t4"@en; rdfs:domain ; ; ; rdfs:comment "Lag time constant 2 (T4) (>= 0). Typical value = 0,1." . a rdf:Property; ; rdfs:label "t5"@en; rdfs:domain ; ; ; rdfs:comment "Lead time constant 3 (T5) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "t6"@en; rdfs:domain ; ; ; rdfs:comment "Lag time constant 3 (T6) (>= 0). Typical value = 0,05." . a rdf:Property; ; rdfs:label "t7"@en; rdfs:domain ; ; ; rdfs:comment "Lead time constant 4 (T7) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "t8"@en; rdfs:domain ; ; ; rdfs:comment "Lag time constant 4 (T8) (>= 0). Typical value = 0,05." . a rdf:Property; ; rdfs:label "tp"@en; rdfs:domain ; ; ; rdfs:comment "Gate servo time constant (Tp) (>= 0). Typical value = 0,05." . a rdf:Property; ; rdfs:label "velop"@en; rdfs:domain ; ; ; rdfs:comment "Maximum gate opening velocity (Velop). Unit = PU / s. Typical value = 0,2." . a rdf:Property; ; rdfs:label "velcl"@en; rdfs:domain ; ; ; rdfs:comment "Maximum gate closing velocity (Velcl). Unit = PU / s. Typical value = -0,2." . a rdf:Property; ; rdfs:label "ki"@en; rdfs:domain ; ; ; rdfs:comment "Integral gain (Ki). Typical value = 0,5." . a rdf:Property; ; rdfs:label "kg"@en; rdfs:domain ; ; ; rdfs:comment "Gate servo gain (Kg). Typical value = 2." . a rdf:Property; ; rdfs:label "gmax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum governor output (Gmax) (> GovHydroR.gmin). Typical value = 1,05." . a rdf:Property; ; rdfs:label "gmin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum governor output (Gmin) (< GovHydroR.gmax). Typical value = -0,05." . a rdf:Property; ; rdfs:label "tt"@en; rdfs:domain ; ; ; rdfs:comment "Power feedback time constant (Tt) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "inputSignal"@en; rdfs:domain ; ; ; rdfs:comment """Input signal switch (Flag). true = Pe input is used false = feedback is received from CV. Flag is normally dependent on Tt. If Tt is zero, Flag is set to false. If Tt is not zero, Flag is set to true. Typical value = true.""" . a rdf:Property; ; rdfs:label "db1"@en; rdfs:domain ; ; ; rdfs:comment "Intentional dead-band width (db1). Unit = Hz. Typical value = 0." . a rdf:Property; ; rdfs:label "eps"@en; rdfs:domain ; ; ; rdfs:comment "Intentional db hysteresis (eps). Unit = Hz. Typical value = 0." . a rdf:Property; ; rdfs:label "db2"@en; rdfs:domain ; ; ; rdfs:comment "Unintentional dead-band (db2). Unit = MW. Typical value = 0." . a rdf:Property; ; rdfs:label "tw"@en; rdfs:domain ; ; ; rdfs:comment "Water inertia time constant (Tw) (> 0). Typical value = 1." . a rdf:Property; ; rdfs:label "at"@en; rdfs:domain ; ; ; rdfs:comment "Turbine gain (At). Typical value = 1,2." . a rdf:Property; ; rdfs:label "dturb"@en; rdfs:domain ; ; ; rdfs:comment "Turbine damping factor (Dturb). Typical value = 0,2." . a rdf:Property; ; rdfs:label "qnl"@en; rdfs:domain ; ; ; rdfs:comment "No-load turbine flow at nominal head (Qnl). Typical value = 0,08." . a rdf:Property; ; rdfs:label "h0"@en; rdfs:domain ; ; ; rdfs:comment "Turbine nominal head (H0). Typical value = 1." . a rdf:Property; ; rdfs:label "gv1"@en; rdfs:domain ; ; ; rdfs:comment "Nonlinear gain point 1, PU gv (Gv1). Typical value = 0." . a rdf:Property; ; rdfs:label "pgv1"@en; rdfs:domain ; ; ; rdfs:comment "Nonlinear gain point 1, PU power (Pgv1). Typical value = 0." . a rdf:Property; ; rdfs:label "gv2"@en; rdfs:domain ; ; ; rdfs:comment "Nonlinear gain point 2, PU gv (Gv2). Typical value = 0." . a rdf:Property; ; rdfs:label "pgv2"@en; rdfs:domain ; ; ; rdfs:comment "Nonlinear gain point 2, PU power (Pgv2). Typical value = 0." . a rdf:Property; ; rdfs:label "gv3"@en; rdfs:domain ; ; ; rdfs:comment "Nonlinear gain point 3, PU gv (Gv3). Typical value = 0." . a rdf:Property; ; rdfs:label "pgv3"@en; rdfs:domain ; ; ; rdfs:comment "Nonlinear gain point 3, PU power (Pgv3). Typical value = 0." . a rdf:Property; ; rdfs:label "gv4"@en; rdfs:domain ; ; ; rdfs:comment "Nonlinear gain point 4, PU gv (Gv4). Typical value = 0." . a rdf:Property; ; rdfs:label "pgv4"@en; rdfs:domain ; ; ; rdfs:comment "Nonlinear gain point 4, PU power (Pgv4). Typical value = 0." . a rdf:Property; ; rdfs:label "gv5"@en; rdfs:domain ; ; ; rdfs:comment "Nonlinear gain point 5, PU gv (Gv5). Typical value = 0." . a rdf:Property; ; rdfs:label "pgv5"@en; rdfs:domain ; ; ; rdfs:comment "Nonlinear gain point 5, PU power (Pgv5). Typical value = 0." . a rdf:Property; ; rdfs:label "gv6"@en; rdfs:domain ; ; ; rdfs:comment "Nonlinear gain point 6, PU gv (Gv6). Typical value = 0." . a rdf:Property; ; rdfs:label "pgv6"@en; rdfs:domain ; ; ; rdfs:comment "Nonlinear gain point 6, PU power (Pgv6). Typical value = 0." . a rdfs:Class; rdfs:label "GovHydroWEH"@en; rdfs:subClassOf ; rdfs:comment """WoodwardTM electric hydro governor. [Footnote: Woodward electric hydro governors are an example of suitable products available commercially. This information is given for the convenience of users of this document and does not constitute an endorsement by IEC of these products.]"""; ; . a rdf:Property; ; rdfs:label "mwbase"@en; rdfs:domain ; ; ; rdfs:comment "Base for power values (MWbase) (> 0). Unit = MW." . a rdf:Property; ; rdfs:label "rpg"@en; rdfs:domain ; ; ; rdfs:comment "Permanent droop for governor output feedback (R-Perm-Gate)." . a rdf:Property; ; rdfs:label "rpp"@en; rdfs:domain ; ; ; rdfs:comment "Permanent droop for electrical power feedback (R-Perm-Pe)." . a rdf:Property; ; rdfs:label "tpe"@en; rdfs:domain ; ; ; rdfs:comment "Electrical power droop time constant (Tpe) (>= 0)." . a rdf:Property; ; rdfs:label "kp"@en; rdfs:domain ; ; ; rdfs:comment "Derivative control gain (Kp)." . a rdf:Property; ; rdfs:label "ki"@en; rdfs:domain ; ; ; rdfs:comment "Derivative controller Integral gain (Ki)." . a rdf:Property; ; rdfs:label "kd"@en; rdfs:domain ; ; ; rdfs:comment "Derivative controller derivative gain (Kd)." . a rdf:Property; ; rdfs:label "td"@en; rdfs:domain ; ; ; rdfs:comment "Derivative controller time constant (Td) (>= 0). Limits the derivative characteristic beyond a breakdown frequency to avoid amplification of high-frequency noise." . a rdf:Property; ; rdfs:label "tp"@en; rdfs:domain ; ; ; rdfs:comment "Pilot valve time lag time constant (Tp) (>= 0)." . a rdf:Property; ; rdfs:label "tdv"@en; rdfs:domain ; ; ; rdfs:comment "Distributive valve time lag time constant (Tdv) (>= 0)." . a rdf:Property; ; rdfs:label "tg"@en; rdfs:domain ; ; ; rdfs:comment "Value to allow the distribution valve controller to advance beyond the gate movement rate limit (Tg) (>= 0)." . a rdf:Property; ; rdfs:label "gtmxop"@en; rdfs:domain ; ; ; rdfs:comment "Maximum gate opening rate (Gtmxop)." . a rdf:Property; ; rdfs:label "gtmxcl"@en; rdfs:domain ; ; ; rdfs:comment "Maximum gate closing rate (Gtmxcl)." . a rdf:Property; ; rdfs:label "gmax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum gate position (Gmax) (> GovHydroWEH.gmin)." . a rdf:Property; ; rdfs:label "gmin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum gate position (Gmin) (< GovHydroWEH.gmax)." . a rdf:Property; ; rdfs:label "dturb"@en; rdfs:domain ; ; ; rdfs:comment "Turbine damping factor (Dturb). Unit = delta P (PU of MWbase) / delta speed (PU)." . a rdf:Property; ; rdfs:label "tw"@en; rdfs:domain ; ; ; rdfs:comment "Water inertia time constant (Tw) (> 0)." . a rdf:Property; ; rdfs:label "db"@en; rdfs:domain ; ; ; rdfs:comment "Speed deadband (db)." . a rdf:Property; ; rdfs:label "dpv"@en; rdfs:domain ; ; ; rdfs:comment "Value to allow the pilot valve controller to advance beyond the gate limits (Dpv)." . a rdf:Property; ; rdfs:label "dicn"@en; rdfs:domain ; ; ; rdfs:comment "Value to allow the integral controller to advance beyond the gate limits (Dicn)." . a rdf:Property; ; rdfs:label "feedbackSignal"@en; rdfs:domain ; ; ; rdfs:comment """Feedback signal selection (Sw). true = PID output (if R-Perm-Gate = droop and R-Perm-Pe = 0) false = electrical power (if R-Perm-Gate = 0 and R-Perm-Pe = droop) or false = gate position (if R-Perm-Gate = droop and R-Perm-Pe = 0). Typical value = false.""" . a rdf:Property; ; rdfs:label "gv1"@en; rdfs:domain ; ; ; rdfs:comment "Gate 1 (Gv1). Gate Position value for point 1 for lookup table representing water flow through the turbine as a function of gate position to produce steady state flow." . a rdf:Property; ; rdfs:label "gv2"@en; rdfs:domain ; ; ; rdfs:comment "Gate 2 (Gv2). Gate Position value for point 2 for lookup table representing water flow through the turbine as a function of gate position to produce steady state flow." . a rdf:Property; ; rdfs:label "gv3"@en; rdfs:domain ; ; ; rdfs:comment "Gate 3 (Gv3). Gate Position value for point 3 for lookup table representing water flow through the turbine as a function of gate position to produce steady state flow." . a rdf:Property; ; rdfs:label "gv4"@en; rdfs:domain ; ; ; rdfs:comment "Gate 4 (Gv4). Gate Position value for point 4 for lookup table representing water flow through the turbine as a function of gate position to produce steady state flow." . a rdf:Property; ; rdfs:label "gv5"@en; rdfs:domain ; ; ; rdfs:comment "Gate 5 (Gv5). Gate Position value for point 5 for lookup table representing water flow through the turbine as a function of gate position to produce steady state flow." . a rdf:Property; ; rdfs:label "fl1"@en; rdfs:domain ; ; ; rdfs:comment "Flowgate 1 (Fl1). Flow value for gate position point 1 for lookup table representing water flow through the turbine as a function of gate position to produce steady state flow." . a rdf:Property; ; rdfs:label "fl2"@en; rdfs:domain ; ; ; rdfs:comment "Flowgate 2 (Fl2). Flow value for gate position point 2 for lookup table representing water flow through the turbine as a function of gate position to produce steady state flow." . a rdf:Property; ; rdfs:label "fl3"@en; rdfs:domain ; ; ; rdfs:comment "Flowgate 3 (Fl3). Flow value for gate position point 3 for lookup table representing water flow through the turbine as a function of gate position to produce steady state flow." . a rdf:Property; ; rdfs:label "fl4"@en; rdfs:domain ; ; ; rdfs:comment "Flowgate 4 (Fl4). Flow value for gate position point 4 for lookup table representing water flow through the turbine as a function of gate position to produce steady state flow." . a rdf:Property; ; rdfs:label "fl5"@en; rdfs:domain ; ; ; rdfs:comment "Flowgate 5 (Fl5). Flow value for gate position point 5 for lookup table representing water flow through the turbine as a function of gate position to produce steady state flow." . a rdf:Property; ; rdfs:label "fp1"@en; rdfs:domain ; ; ; rdfs:comment "Flow P1 (Fp1). Turbine flow value for point 1 for lookup table representing PU mechanical power on machine MVA rating as a function of turbine flow." . a rdf:Property; ; rdfs:label "fp2"@en; rdfs:domain ; ; ; rdfs:comment "Flow P2 (Fp2). Turbine flow value for point 2 for lookup table representing PU mechanical power on machine MVA rating as a function of turbine flow." . a rdf:Property; ; rdfs:label "fp3"@en; rdfs:domain ; ; ; rdfs:comment "Flow P3 (Fp3). Turbine flow value for point 3 for lookup table representing PU mechanical power on machine MVA rating as a function of turbine flow." . a rdf:Property; ; rdfs:label "fp4"@en; rdfs:domain ; ; ; rdfs:comment "Flow P4 (Fp4). Turbine flow value for point 4 for lookup table representing PU mechanical power on machine MVA rating as a function of turbine flow." . a rdf:Property; ; rdfs:label "fp5"@en; rdfs:domain ; ; ; rdfs:comment "Flow P5 (Fp5). Turbine flow value for point 5 for lookup table representing PU mechanical power on machine MVA rating as a function of turbine flow." . a rdf:Property; ; rdfs:label "fp6"@en; rdfs:domain ; ; ; rdfs:comment "Flow P6 (Fp6). Turbine flow value for point 6 for lookup table representing PU mechanical power on machine MVA rating as a function of turbine flow." . a rdf:Property; ; rdfs:label "fp7"@en; rdfs:domain ; ; ; rdfs:comment "Flow P7 (Fp7). Turbine flow value for point 7 for lookup table representing PU mechanical power on machine MVA rating as a function of turbine flow." . a rdf:Property; ; rdfs:label "fp8"@en; rdfs:domain ; ; ; rdfs:comment "Flow P8 (Fp8). Turbine flow value for point 8 for lookup table representing PU mechanical power on machine MVA rating as a function of turbine flow." . a rdf:Property; ; rdfs:label "fp9"@en; rdfs:domain ; ; ; rdfs:comment "Flow P9 (Fp9). Turbine flow value for point 9 for lookup table representing PU mechanical power on machine MVA rating as a function of turbine flow." . a rdf:Property; ; rdfs:label "fp10"@en; rdfs:domain ; ; ; rdfs:comment "Flow P10 (Fp10). Turbine flow value for point 10 for lookup table representing PU mechanical power on machine MVA rating as a function of turbine flow." . a rdf:Property; ; rdfs:label "pmss1"@en; rdfs:domain ; ; ; rdfs:comment "Pmss flow P1 (Pmss1). Mechanical power output for turbine flow point 1 for lookup table representing PU mechanical power on machine MVA rating as a function of turbine flow." . a rdf:Property; ; rdfs:label "pmss2"@en; rdfs:domain ; ; ; rdfs:comment "Pmss flow P2 (Pmss2). Mechanical power output for turbine flow point 2 for lookup table representing PU mechanical power on machine MVA rating as a function of turbine flow." . a rdf:Property; ; rdfs:label "pmss3"@en; rdfs:domain ; ; ; rdfs:comment "Pmss flow P3 (Pmss3). Mechanical power output for turbine flow point 3 for lookup table representing PU mechanical power on machine MVA rating as a function of turbine flow." . a rdf:Property; ; rdfs:label "pmss4"@en; rdfs:domain ; ; ; rdfs:comment "Pmss flow P4 (Pmss4). Mechanical power output for turbine flow point 4 for lookup table representing PU mechanical power on machine MVA rating as a function of turbine flow." . a rdf:Property; ; rdfs:label "pmss5"@en; rdfs:domain ; ; ; rdfs:comment "Pmss flow P5 (Pmss5). Mechanical power output for turbine flow point 5 for lookup table representing PU mechanical power on machine MVA rating as a function of turbine flow." . a rdf:Property; ; rdfs:label "pmss6"@en; rdfs:domain ; ; ; rdfs:comment "Pmss flow P6 (Pmss6). Mechanical power output for turbine flow point 6 for lookup table representing PU mechanical power on machine MVA rating as a function of turbine flow." . a rdf:Property; ; rdfs:label "pmss7"@en; rdfs:domain ; ; ; rdfs:comment "Pmss flow P7 (Pmss7). Mechanical power output for turbine flow point 7 for lookup table representing PU mechanical power on machine MVA rating as a function of turbine flow." . a rdf:Property; ; rdfs:label "pmss8"@en; rdfs:domain ; ; ; rdfs:comment "Pmss flow P8 (Pmss8). Mechanical power output for turbine flow point 8 for lookup table representing PU mechanical power on machine MVA rating as a function of turbine flow." . a rdf:Property; ; rdfs:label "pmss9"@en; rdfs:domain ; ; ; rdfs:comment "Pmss flow P9 (Pmss9). Mechanical power output for turbine flow point 9 for lookup table representing PU mechanical power on machine MVA rating as a function of turbine flow." . a rdf:Property; ; rdfs:label "pmss10"@en; rdfs:domain ; ; ; rdfs:comment "Pmss flow P10 (Pmss10). Mechanical power output for turbine flow point 10 for lookup table representing PU mechanical power on machine MVA rating as a function of turbine flow." . a rdfs:Class; rdfs:label "GovHydroWPID"@en; rdfs:subClassOf ; rdfs:comment """WoodwardTM PID hydro governor. [Footnote: Woodward PID hydro governors are an example of suitable products available commercially. This information is given for the convenience of users of this document and does not constitute an endorsement by IEC of these products.]"""; ; . a rdf:Property; ; rdfs:label "mwbase"@en; rdfs:domain ; ; ; rdfs:comment "Base for power values (MWbase) (> 0). Unit = MW." . a rdf:Property; ; rdfs:label "treg"@en; rdfs:domain ; ; ; rdfs:comment "Speed detector time constant (Treg) (>= 0)." . a rdf:Property; ; rdfs:label "reg"@en; rdfs:domain ; ; ; rdfs:comment "Permanent drop (Reg)." . a rdf:Property; ; rdfs:label "kp"@en; rdfs:domain ; ; ; rdfs:comment "Proportional gain (Kp). Typical value = 0,1." . a rdf:Property; ; rdfs:label "ki"@en; rdfs:domain ; ; ; rdfs:comment "Reset gain (Ki). Typical value = 0,36." . a rdf:Property; ; rdfs:label "kd"@en; rdfs:domain ; ; ; rdfs:comment "Derivative gain (Kd). Typical value = 1,11." . a rdf:Property; ; rdfs:label "ta"@en; rdfs:domain ; ; ; rdfs:comment "Controller time constant (Ta) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "tb"@en; rdfs:domain ; ; ; rdfs:comment "Gate servo time constant (Tb) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "velmax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum gate opening velocity (Velmax) (> GovHydroWPID.velmin). Unit = PU / s. Typical value = 0." . a rdf:Property; ; rdfs:label "velmin"@en; rdfs:domain ; ; ; rdfs:comment "Maximum gate closing velocity (Velmin) (< GovHydroWPID.velmax). Unit = PU / s. Typical value = 0." . a rdf:Property; ; rdfs:label "gatmax"@en; rdfs:domain ; ; ; rdfs:comment "Gate opening limit maximum (Gatmax) (> GovHydroWPID.gatmin)." . a rdf:Property; ; rdfs:label "gatmin"@en; rdfs:domain ; ; ; rdfs:comment "Gate opening limit minimum (Gatmin) (< GovHydroWPID.gatmax)." . a rdf:Property; ; rdfs:label "tw"@en; rdfs:domain ; ; ; rdfs:comment "Water inertia time constant (Tw) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "pmax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum power output (Pmax) (> GovHydroWPID.pmin)." . a rdf:Property; ; rdfs:label "pmin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum power output (Pmin) (< GovHydroWPID.pmax)." . a rdf:Property; ; rdfs:label "d"@en; rdfs:domain ; ; ; rdfs:comment "Turbine damping factor (D). Unit = delta P / delta speed." . a rdf:Property; ; rdfs:label "gv3"@en; rdfs:domain ; ; ; rdfs:comment "Gate position 3 (Gv3) (= 1,0)." . a rdf:Property; ; rdfs:label "gv1"@en; rdfs:domain ; ; ; rdfs:comment "Gate position 1 (Gv1)." . a rdf:Property; ; rdfs:label "pgv1"@en; rdfs:domain ; ; ; rdfs:comment "Output at Gv1 PU of MWbase (Pgv1)." . a rdf:Property; ; rdfs:label "gv2"@en; rdfs:domain ; ; ; rdfs:comment "Gate position 2 (Gv2). " . a rdf:Property; ; rdfs:label "pgv2"@en; rdfs:domain ; ; ; rdfs:comment "Output at Gv2 PU of MWbase (Pgv2)." . a rdf:Property; ; rdfs:label "pgv3"@en; rdfs:domain ; ; ; rdfs:comment "Output at Gv3 PU of MWbase (Pgv3). " . a rdfs:Class; rdfs:label "GovSteam0"@en; rdfs:subClassOf ; rdfs:comment "A simplified steam turbine governor."; ; . a rdf:Property; ; rdfs:label "mwbase"@en; rdfs:domain ; ; ; rdfs:comment "Base for power values (MWbase) (> 0). Unit = MW." . a rdf:Property; ; rdfs:label "r"@en; rdfs:domain ; ; ; rdfs:comment "Permanent droop (R). Typical value = 0,05." . a rdf:Property; ; rdfs:label "t1"@en; rdfs:domain ; ; ; rdfs:comment "Steam bowl time constant (T1) (> 0). Typical value = 0,5." . a rdf:Property; ; rdfs:label "vmax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum valve position, PU of mwcap (Vmax) (> GovSteam0.vmin). Typical value = 1." . a rdf:Property; ; rdfs:label "vmin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum valve position, PU of mwcap (Vmin) (< GovSteam0.vmax). Typical value = 0." . a rdf:Property; ; rdfs:label "t2"@en; rdfs:domain ; ; ; rdfs:comment "Numerator time constant of T2/T3 block (T2) (>= 0). Typical value = 3." . a rdf:Property; ; rdfs:label "t3"@en; rdfs:domain ; ; ; rdfs:comment "Reheater time constant (T3) (> 0). Typical value = 10." . a rdf:Property; ; rdfs:label "dt"@en; rdfs:domain ; ; ; rdfs:comment "Turbine damping coefficient (Dt). Unit = delta P / delta speed. Typical value = 0." . a rdfs:Class; rdfs:label "GovSteam1"@en; rdfs:subClassOf ; rdfs:comment "Steam turbine governor, based on the GovSteamIEEE1 (with optional deadband and nonlinear valve gain added). "; ; . a rdf:Property; ; rdfs:label "mwbase"@en; rdfs:domain ; ; ; rdfs:comment "Base for power values (MWbase) (> 0). Unit = MW." . a rdf:Property; ; rdfs:label "k"@en; rdfs:domain ; ; ; rdfs:comment "Governor gain (reciprocal of droop) (K) (> 0). Typical value = 25." . a rdf:Property; ; rdfs:label "t1"@en; rdfs:domain ; ; ; rdfs:comment "Governor lag time constant (T1) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "t2"@en; rdfs:domain ; ; ; rdfs:comment "Governor lead time constant (T2) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "t3"@en; rdfs:domain ; ; ; rdfs:comment "Valve positioner time constant (T3) (> 0). Typical value = 0,1." . a rdf:Property; ; rdfs:label "uo"@en; rdfs:domain ; ; ; rdfs:comment "Maximum valve opening velocity (Uo) (> 0). Unit = PU / s. Typical value = 1." . a rdf:Property; ; rdfs:label "uc"@en; rdfs:domain ; ; ; rdfs:comment "Maximum valve closing velocity (Uc) (< 0). Unit = PU / s. Typical value = -10." . a rdf:Property; ; rdfs:label "pmax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum valve opening (Pmax) (> GovSteam1.pmin). Typical value = 1." . a rdf:Property; ; rdfs:label "pmin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum valve opening (Pmin) (>= 0 and < GovSteam1.pmax). Typical value = 0." . a rdf:Property; ; rdfs:label "t4"@en; rdfs:domain ; ; ; rdfs:comment "Inlet piping/steam bowl time constant (T4) (>= 0). Typical value = 0,3." . a rdf:Property; ; rdfs:label "k1"@en; rdfs:domain ; ; ; rdfs:comment "Fraction of HP shaft power after first boiler pass (K1). Typical value = 0,2." . a rdf:Property; ; rdfs:label "k2"@en; rdfs:domain ; ; ; rdfs:comment "Fraction of LP shaft power after first boiler pass (K2). Typical value = 0." . a rdf:Property; ; rdfs:label "t5"@en; rdfs:domain ; ; ; rdfs:comment "Time constant of second boiler pass (T5) (>= 0). Typical value = 5." . a rdf:Property; ; rdfs:label "k3"@en; rdfs:domain ; ; ; rdfs:comment "Fraction of HP shaft power after second boiler pass (K3). Typical value = 0,3." . ; rdfs:label "k4"@en; a rdf:Property; rdfs:domain ; ; ; rdfs:comment "Fraction of LP shaft power after second boiler pass (K4). Typical value = 0." . a rdf:Property; ; rdfs:label "t6"@en; rdfs:domain ; ; ; rdfs:comment "Time constant of third boiler pass (T6) (>= 0). Typical value = 0,5." . a rdf:Property; ; rdfs:label "k5"@en; rdfs:domain ; ; ; rdfs:comment "Fraction of HP shaft power after third boiler pass (K5). Typical value = 0,5." . a rdf:Property; ; rdfs:label "k6"@en; rdfs:domain ; ; ; rdfs:comment "Fraction of LP shaft power after third boiler pass (K6). Typical value = 0." . a rdf:Property; ; rdfs:label "t7"@en; rdfs:domain ; ; ; rdfs:comment "Time constant of fourth boiler pass (T7) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "k7"@en; rdfs:domain ; ; ; rdfs:comment "Fraction of HP shaft power after fourth boiler pass (K7). Typical value = 0." . a rdf:Property; ; rdfs:label "k8"@en; rdfs:domain ; ; ; rdfs:comment "Fraction of LP shaft power after fourth boiler pass (K8). Typical value = 0." . a rdf:Property; ; rdfs:label "db1"@en; rdfs:domain ; ; ; rdfs:comment "Intentional deadband width (db1). Unit = Hz. Typical value = 0." . a rdf:Property; ; rdfs:label "eps"@en; rdfs:domain ; ; ; rdfs:comment "Intentional db hysteresis (eps). Unit = Hz. Typical value = 0." . a rdf:Property; ; rdfs:label "sdb1"@en; rdfs:domain ; ; ; rdfs:comment """Intentional deadband indicator. true = intentional deadband is applied false = intentional deadband is not applied. Typical value = true.""" . a rdf:Property; ; rdfs:label "sdb2"@en; rdfs:domain ; ; ; rdfs:comment """Unintentional deadband location. true = intentional deadband is applied before point \"A\" false = intentional deadband is applied after point \"A\". Typical value = true.""" . a rdf:Property; ; rdfs:label "db2"@en; rdfs:domain ; ; ; rdfs:comment "Unintentional deadband (db2). Unit = MW. Typical value = 0." . a rdf:Property; ; rdfs:label "valve"@en; rdfs:domain ; ; ; rdfs:comment """Nonlinear valve characteristic. true = nonlinear valve characteristic is used false = nonlinear valve characteristic is not used. Typical value = true.""" . a rdf:Property; ; rdfs:label "gv1"@en; rdfs:domain ; ; ; rdfs:comment "Nonlinear gain valve position point 1 (GV1). Typical value = 0." . a rdf:Property; ; rdfs:label "pgv1"@en; rdfs:domain ; ; ; rdfs:comment "Nonlinear gain power value point 1 (Pgv1). Typical value = 0." . a rdf:Property; ; rdfs:label "gv2"@en; rdfs:domain ; ; ; rdfs:comment "Nonlinear gain valve position point 2 (GV2). Typical value = 0,4." . a rdf:Property; ; rdfs:label "pgv2"@en; rdfs:domain ; ; ; rdfs:comment "Nonlinear gain power value point 2 (Pgv2). Typical value = 0,75." . a rdf:Property; ; rdfs:label "gv3"@en; rdfs:domain ; ; ; rdfs:comment "Nonlinear gain valve position point 3 (GV3). Typical value = 0,5." . a rdf:Property; ; rdfs:label "pgv3"@en; rdfs:domain ; ; ; rdfs:comment "Nonlinear gain power value point 3 (Pgv3). Typical value = 0,91." . a rdf:Property; ; rdfs:label "gv4"@en; rdfs:domain ; ; ; rdfs:comment "Nonlinear gain valve position point 4 (GV4). Typical value = 0,6." . a rdf:Property; ; rdfs:label "pgv4"@en; rdfs:domain ; ; ; rdfs:comment "Nonlinear gain power value point 4 (Pgv4). Typical value = 0,98." . a rdf:Property; ; rdfs:label "gv5"@en; rdfs:domain ; ; ; rdfs:comment "Nonlinear gain valve position point 5 (GV5). Typical value = 1." . a rdf:Property; ; rdfs:label "pgv5"@en; rdfs:domain ; ; ; rdfs:comment "Nonlinear gain power value point 5 (Pgv5). Typical value = 1." . a rdf:Property; ; rdfs:label "gv6"@en; rdfs:domain ; ; ; rdfs:comment "Nonlinear gain valve position point 6 (GV6). Typical value = 0." . a rdf:Property; ; rdfs:label "pgv6"@en; rdfs:domain ; ; ; rdfs:comment "Nonlinear gain power value point 6 (Pgv6). Typical value = 0." . a rdfs:Class; rdfs:label "GovSteam2"@en; rdfs:subClassOf ; rdfs:comment "Simplified governor."; ; . a rdf:Property; ; rdfs:label "k"@en; rdfs:domain ; ; ; rdfs:comment "Governor gain (reciprocal of droop) (K). Typical value = 20." . a rdf:Property; ; rdfs:label "dbf"@en; rdfs:domain ; ; ; rdfs:comment "Frequency deadband (DBF). Typical value = 0." . a rdf:Property; ; rdfs:label "t1"@en; rdfs:domain ; ; ; rdfs:comment "Governor lag time constant (T1) (> 0). Typical value = 0,45." . a rdf:Property; ; rdfs:label "t2"@en; rdfs:domain ; ; ; rdfs:comment "Governor lead time constant (T2) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "pmax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum fuel flow (PMAX) (> GovSteam2.pmin). Typical value = 1." . a rdf:Property; ; rdfs:label "pmin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum fuel flow (PMIN) (< GovSteam2.pmax). Typical value = 0." . a rdf:Property; ; rdfs:label "mxef"@en; rdfs:domain ; ; ; rdfs:comment "Fuel flow maximum positive error value (MXEF). Typical value = 1." . a rdf:Property; ; rdfs:label "mnef"@en; rdfs:domain ; ; ; rdfs:comment "Fuel flow maximum negative error value (MNEF). Typical value = -1." . a rdfs:Class; rdfs:label "GovSteamBB"@en; rdfs:subClassOf ; rdfs:comment "European governor model."; ; . a rdf:Property; ; rdfs:label "fcut"@en; rdfs:domain ; ; ; rdfs:comment "Frequency deadband (fcut) (>= 0). Typical value = 0,002." . a rdf:Property; ; rdfs:label "ks"@en; rdfs:domain ; ; ; rdfs:comment "Gain (Ks). Typical value = 21,0." . a rdf:Property; ; rdfs:label "kls"@en; rdfs:domain ; ; ; rdfs:comment "Gain (Kls) (> 0). Typical value = 0,1." . a rdf:Property; ; rdfs:label "kg"@en; rdfs:domain ; ; ; rdfs:comment "Gain (Kg). Typical value = 1,0." . a rdf:Property; ; rdfs:label "t1"@en; rdfs:domain ; ; ; rdfs:comment "Time constant (T1). Typical value = 0,05." . a rdf:Property; ; rdfs:label "kp"@en; rdfs:domain ; ; ; rdfs:comment "Gain (Kp). Typical value = 1,0." . a rdf:Property; ; rdfs:label "tn"@en; rdfs:domain ; ; ; rdfs:comment "Time constant (Tn) (> 0). Typical value = 1,0." . a rdf:Property; ; rdfs:label "kd"@en; rdfs:domain ; ; ; rdfs:comment "Gain (Kd). Typical value = 1,0." . a rdf:Property; ; rdfs:label "td"@en; rdfs:domain ; ; ; rdfs:comment "Time constant (Td) (> 0). Typical value = 1,0." . a rdf:Property; ; rdfs:label "pmax"@en; rdfs:domain ; ; ; rdfs:comment "High power limit (Pmax) (> GovSteamBB.pmin). Typical value = 1,0." . a rdf:Property; ; rdfs:label "pmin"@en; rdfs:domain ; ; ; rdfs:comment "Low power limit (Pmin) (< GovSteamBB.pmax). Typical value = 0." . a rdf:Property; ; rdfs:label "t4"@en; rdfs:domain ; ; ; rdfs:comment "Time constant (T4). Typical value = 0,15." . a rdf:Property; ; rdfs:label "k2"@en; rdfs:domain ; ; ; rdfs:comment "Gain (K2). Typical value = 0,75." . a rdf:Property; ; rdfs:label "t5"@en; rdfs:domain ; ; ; rdfs:comment "Time constant (T5). Typical value = 12,0." . a rdf:Property; ; rdfs:label "k3"@en; rdfs:domain ; ; ; rdfs:comment "Gain (K3). Typical value = 0,5." . a rdf:Property; ; rdfs:label "t6"@en; rdfs:domain ; ; ; rdfs:comment "Time constant (T6). Typical value = 0,75." . a rdf:Property; ; rdfs:label "peflag"@en; rdfs:domain ; ; ; rdfs:comment """Electric power input selection (Peflag). true = electric power input false = feedback signal. Typical value = false.""" . a rdfs:Class; rdfs:label "GovSteamCC"@en; rdfs:subClassOf ; rdfs:comment "Cross compound turbine governor. Unlike tandem compound units, cross compound units are not on the same shaft."; ; . a rdf:Property; ; rdfs:label "mwbase"@en; rdfs:domain ; ; ; rdfs:comment "Base for power values (MWbase) (> 0). Unit = MW." . a rdf:Property; ; rdfs:label "pmaxhp"@en; rdfs:domain ; ; ; rdfs:comment "Maximum HP value position (Pmaxhp). Typical value = 1." . a rdf:Property; ; rdfs:label "rhp"@en; rdfs:domain ; ; ; rdfs:comment "HP governor droop (Rhp) (> 0). Typical value = 0,05." . a rdf:Property; ; rdfs:label "t1hp"@en; rdfs:domain ; ; ; rdfs:comment "HP governor time constant (T1hp) (>= 0). Typical value = 0,1." . a rdf:Property; ; rdfs:label "t3hp"@en; rdfs:domain ; ; ; rdfs:comment "HP turbine time constant (T3hp) (>= 0). Typical value = 0,1." . a rdf:Property; ; rdfs:label "t4hp"@en; rdfs:domain ; ; ; rdfs:comment "HP turbine time constant (T4hp) (>= 0). Typical value = 0,1." . a rdf:Property; ; rdfs:label "t5hp"@en; rdfs:domain ; ; ; rdfs:comment "HP reheater time constant (T5hp) (>= 0). Typical value = 10." . a rdf:Property; ; rdfs:label "fhp"@en; rdfs:domain ; ; ; rdfs:comment "Fraction of HP power ahead of reheater (Fhp). Typical value = 0,3." . a rdf:Property; ; rdfs:label "dhp"@en; rdfs:domain ; ; ; rdfs:comment "HP damping factor (Dhp). Typical value = 0." . a rdf:Property; ; rdfs:label "pmaxlp"@en; rdfs:domain ; ; ; rdfs:comment "Maximum LP value position (Pmaxlp). Typical value = 1." . a rdf:Property; ; rdfs:label "rlp"@en; rdfs:domain ; ; ; rdfs:comment "LP governor droop (Rlp) (> 0). Typical value = 0,05." . a rdf:Property; ; rdfs:label "t1lp"@en; rdfs:domain ; ; ; rdfs:comment "LP governor time constant (T1lp) (>= 0). Typical value = 0,1." . a rdf:Property; ; rdfs:label "t3lp"@en; rdfs:domain ; ; ; rdfs:comment "LP turbine time constant (T3lp) (>= 0). Typical value = 0,1." . a rdf:Property; ; rdfs:label "t4lp"@en; rdfs:domain ; ; ; rdfs:comment "LP turbine time constant (T4lp) (>= 0). Typical value = 0,1." . a rdf:Property; ; rdfs:label "t5lp"@en; rdfs:domain ; ; ; rdfs:comment "LP reheater time constant (T5lp) (>= 0). Typical value = 10." . a rdf:Property; ; rdfs:label "flp"@en; rdfs:domain ; ; ; rdfs:comment "Fraction of LP power ahead of reheater (Flp). Typical value = 0,7." . a rdf:Property; ; rdfs:label "dlp"@en; rdfs:domain ; ; ; rdfs:comment "LP damping factor (Dlp). Typical value = 0." . a rdfs:Class; rdfs:label "GovSteamEU"@en; rdfs:subClassOf ; rdfs:comment "Simplified boiler and steam turbine with PID governor."; ; . a rdf:Property; ; rdfs:label "mwbase"@en; rdfs:domain ; ; ; rdfs:comment "Base for power values (MWbase) (> 0). Unit = MW." . a rdf:Property; ; rdfs:label "tp"@en; rdfs:domain ; ; ; rdfs:comment "Power transducer time constant (Tp) (>= 0). Typical value = 0,07." . a rdf:Property; ; rdfs:label "ke"@en; rdfs:domain ; ; ; rdfs:comment "Gain of the power controller (Ke). Typical value = 0,65." . a rdf:Property; ; rdfs:label "tip"@en; rdfs:domain ; ; ; rdfs:comment "Integral time constant of the power controller (Tip) (>= 0). Typical value = 2." . a rdf:Property; ; rdfs:label "tdp"@en; rdfs:domain ; ; ; rdfs:comment "Derivative time constant of the power controller (Tdp) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "tfp"@en; rdfs:domain ; ; ; rdfs:comment "Time constant of the power controller (Tfp) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "tf"@en; rdfs:domain ; ; ; rdfs:comment "Frequency transducer time constant (Tf) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "kfcor"@en; rdfs:domain ; ; ; rdfs:comment "Gain of the frequency corrector (Kfcor). Typical value = 20." . a rdf:Property; ; rdfs:label "db1"@en; rdfs:domain ; ; ; rdfs:comment "Deadband of the frequency corrector (db1). Typical value = 0." . a rdf:Property; ; rdfs:label "wfmax"@en; rdfs:domain ; ; ; rdfs:comment "Upper limit for frequency correction (Wfmax) (> GovSteamEU.wfmin). Typical value = 0,05." . a rdf:Property; ; rdfs:label "wfmin"@en; rdfs:domain ; ; ; rdfs:comment "Lower limit for frequency correction (Wfmin) (< GovSteamEU.wfmax). Typical value = -0,05." . a rdf:Property; ; rdfs:label "pmax"@en; rdfs:domain ; ; ; rdfs:comment "Maximal active power of the turbine (Pmax). Typical value = 1." . a rdf:Property; ; rdfs:label "ten"@en; rdfs:domain ; ; ; rdfs:comment "Electro hydraulic transducer (Ten) (>= 0). Typical value = 0,1." . a rdf:Property; ; rdfs:label "tw"@en; rdfs:domain ; ; ; rdfs:comment "Speed transducer time constant (Tw) (>= 0). Typical value = 0,02." . a rdf:Property; ; rdfs:label "komegacor"@en; rdfs:domain ; ; ; rdfs:comment "Gain of the speed governor (Kwcor). Typical value = 20." . a rdf:Property; ; rdfs:label "db2"@en; rdfs:domain ; ; ; rdfs:comment "Deadband of the speed governor (db2). Typical value = 0,0004." . a rdf:Property; ; rdfs:label "wwmax"@en; rdfs:domain ; ; ; rdfs:comment "Upper limit for the speed governor (Wwmax) (> GovSteamEU.wwmin). Typical value = 0,1." . a rdf:Property; ; rdfs:label "wwmin"@en; rdfs:domain ; ; ; rdfs:comment "Lower limit for the speed governor frequency correction (Wwmin) (< GovSteamEU.wwmax). Typical value = -1." . a rdf:Property; ; rdfs:label "wmax1"@en; rdfs:domain ; ; ; rdfs:comment "Emergency speed control lower limit (wmax1). Typical value = 1,025." . a rdf:Property; ; rdfs:label "wmax2"@en; rdfs:domain ; ; ; rdfs:comment "Emergency speed control upper limit (wmax2). Typical value = 1,05." . a rdf:Property; ; rdfs:label "tvhp"@en; rdfs:domain ; ; ; rdfs:comment "Control valves servo time constant (Tvhp) (>= 0). Typical value = 0,1." . a rdf:Property; ; rdfs:label "cho"@en; rdfs:domain ; ; ; rdfs:comment "Control valves rate opening limit (Cho). Unit = PU / s. Typical value = 0,17." . a rdf:Property; ; rdfs:label "chc"@en; rdfs:domain ; ; ; rdfs:comment "Control valves rate closing limit (Chc). Unit = PU / s. Typical value = -3,3." . a rdf:Property; ; rdfs:label "hhpmax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum control valve position (Hhpmax). Typical value = 1." . a rdf:Property; ; rdfs:label "tvip"@en; rdfs:domain ; ; ; rdfs:comment "Intercept valves servo time constant (Tvip) (>= 0). Typical value = 0,15." . a rdf:Property; ; rdfs:label "cio"@en; rdfs:domain ; ; ; rdfs:comment "Intercept valves rate opening limit (Cio). Typical value = 0,123." . a rdf:Property; ; rdfs:label "cic"@en; rdfs:domain ; ; ; rdfs:comment "Intercept valves rate closing limit (Cic). Typical value = -2,2." . a rdf:Property; ; rdfs:label "simx"@en; rdfs:domain ; ; ; rdfs:comment "Intercept valves transfer limit (Simx). Typical value = 0,425." . a rdf:Property; ; rdfs:label "thp"@en; rdfs:domain ; ; ; rdfs:comment "High pressure (HP) time constant of the turbine (Thp) (>= 0). Typical value = 0,31." . a rdf:Property; ; rdfs:label "trh"@en; rdfs:domain ; ; ; rdfs:comment "Reheater time constant of the turbine (Trh) (>= 0). Typical value = 8." . a rdf:Property; ; rdfs:label "tlp"@en; rdfs:domain ; ; ; rdfs:comment "Low pressure (LP) time constant of the turbine (Tlp) (>= 0). Typical value = 0,45." . a rdf:Property; ; rdfs:label "prhmax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum low pressure limit (Prhmax). Typical value = 1,4." . a rdf:Property; ; rdfs:label "khp"@en; rdfs:domain ; ; ; rdfs:comment "Fraction of total turbine output generated by HP part (Khp). Typical value = 0,277." . a rdf:Property; ; rdfs:label "klp"@en; rdfs:domain ; ; ; rdfs:comment "Fraction of total turbine output generated by HP part (Klp). Typical value = 0,723." . a rdf:Property; ; rdfs:label "tb"@en; rdfs:domain ; ; ; rdfs:comment "Boiler time constant (Tb) (>= 0). Typical value = 100." . a rdfs:Class; rdfs:label "GovSteamFV2"@en; rdfs:subClassOf ; rdfs:comment "Steam turbine governor with reheat time constants and modelling of the effects of fast valve closing to reduce mechanical power."; ; . a rdf:Property; ; rdfs:label "mwbase"@en; rdfs:domain ; ; ; rdfs:comment "Alternate base used instead of machine base in equipment model if necessary (MWbase) (> 0). Unit = MW." . a rdf:Property; ; rdfs:label "t1"@en; rdfs:domain ; ; ; rdfs:comment "Governor time constant (T1) (>= 0)." . a rdf:Property; ; rdfs:label "vmax"@en; rdfs:domain ; ; ; rdfs:comment "(Vmax) (> GovSteamFV2.vmin)." . a rdf:Property; ; rdfs:label "vmin"@en; rdfs:domain ; ; ; rdfs:comment "(Vmin) (< GovSteamFV2.vmax)." . a rdf:Property; ; rdfs:label "k"@en; rdfs:domain ; ; ; rdfs:comment "Fraction of the turbine power developed by turbine sections not involved in fast valving (K)." . a rdf:Property; ; rdfs:label "t3"@en; rdfs:domain ; ; ; rdfs:comment "Reheater time constant (T3) (>= 0)." . a rdf:Property; ; rdfs:label "dt"@en; rdfs:domain ; ; ; rdfs:comment "(Dt)." . a rdf:Property; ; rdfs:label "tt"@en; rdfs:domain ; ; ; rdfs:comment "Time constant with which power falls off after intercept valve closure (Tt) (>= 0)." . a rdf:Property; ; rdfs:label "r"@en; rdfs:domain ; ; ; rdfs:comment "(R)." . a rdf:Property; ; rdfs:label "ta"@en; rdfs:domain ; ; ; rdfs:comment "Time after initial time for valve to close (Ta) (>= 0)." . a rdf:Property; ; rdfs:label "tb"@en; rdfs:domain ; ; ; rdfs:comment "Time after initial time for valve to begin opening (Tb) (>= 0)." . a rdf:Property; ; rdfs:label "tc"@en; rdfs:domain ; ; ; rdfs:comment "Time after initial time for valve to become fully open (Tc) (>= 0)." . a rdfs:Class; rdfs:label "GovSteamFV3"@en; rdfs:subClassOf ; rdfs:comment "Simplified GovSteamIEEE1 steam turbine governor with Prmax limit and fast valving."; ; . a rdf:Property; ; rdfs:label "mwbase"@en; rdfs:domain ; ; ; rdfs:comment "Base for power values (MWbase) (> 0). Unit = MW." . a rdf:Property; ; rdfs:label "k"@en; rdfs:domain ; ; ; rdfs:comment "Governor gain, (reciprocal of droop) (K). Typical value = 20." . a rdf:Property; ; rdfs:label "t1"@en; rdfs:domain ; ; ; rdfs:comment "Governor lead time constant (T1) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "t2"@en; rdfs:domain ; ; ; rdfs:comment "Governor lag time constant (T2) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "t3"@en; rdfs:domain ; ; ; rdfs:comment "Valve positioner time constant (T3) (> 0). Typical value = 0." . a rdf:Property; ; rdfs:label "uo"@en; rdfs:domain ; ; ; rdfs:comment "Maximum valve opening velocity (Uo). Unit = PU / s. Typical value = 0,1." . a rdf:Property; ; rdfs:label "uc"@en; rdfs:domain ; ; ; rdfs:comment "Maximum valve closing velocity (Uc). Unit = PU / s. Typical value = -1." . a rdf:Property; ; rdfs:label "pmax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum valve opening, PU of MWbase (Pmax) (> GovSteamFV3.pmin). Typical value = 1." . a rdf:Property; ; rdfs:label "pmin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum valve opening, PU of MWbase (Pmin) (< GovSteamFV3.pmax). Typical value = 0." . a rdf:Property; ; rdfs:label "t4"@en; rdfs:domain ; ; ; rdfs:comment "Inlet piping/steam bowl time constant (T4) (>= 0). Typical value = 0,2." . a rdf:Property; ; rdfs:label "k1"@en; rdfs:domain ; ; ; rdfs:comment "Fraction of turbine power developed after first boiler pass (K1). Typical value = 0,2." . a rdf:Property; ; rdfs:label "t5"@en; rdfs:domain ; ; ; rdfs:comment "Time constant of second boiler pass (i.e. reheater) (T5) (> 0 if fast valving is used, otherwise >= 0). Typical value = 0,5." . a rdf:Property; ; rdfs:label "k2"@en; rdfs:domain ; ; ; rdfs:comment "Fraction of turbine power developed after second boiler pass (K2). Typical value = 0,2." . a rdf:Property; ; rdfs:label "t6"@en; rdfs:domain ; ; ; rdfs:comment "Time constant of crossover or third boiler pass (T6) (>= 0). Typical value = 10." . a rdf:Property; ; rdfs:label "k3"@en; rdfs:domain ; ; ; rdfs:comment "Fraction of hp turbine power developed after crossover or third boiler pass (K3). Typical value = 0,6." . a rdf:Property; ; rdfs:label "ta"@en; rdfs:domain ; ; ; rdfs:comment "Time to close intercept valve (IV) (Ta) (>= 0). Typical value = 0,97." . a rdf:Property; ; rdfs:label "tb"@en; rdfs:domain ; ; ; rdfs:comment "Time until IV starts to reopen (Tb) (>= 0). Typical value = 0,98." . a rdf:Property; ; rdfs:label "tc"@en; rdfs:domain ; ; ; rdfs:comment "Time until IV is fully open (Tc) (>= 0). Typical value = 0,99." . a rdf:Property; ; rdfs:label "prmax"@en; rdfs:domain ; ; ; rdfs:comment "Max. pressure in reheater (Prmax). Typical value = 1." . a rdf:Property; ; rdfs:label "gv1"@en; rdfs:domain ; ; ; rdfs:comment "Nonlinear gain valve position point 1 (GV1). Typical value = 0." . a rdf:Property; ; rdfs:label "pgv1"@en; rdfs:domain ; ; ; rdfs:comment "Nonlinear gain power value point 1 (Pgv1). Typical value = 0." . a rdf:Property; ; rdfs:label "gv2"@en; rdfs:domain ; ; ; rdfs:comment "Nonlinear gain valve position point 2 (GV2). Typical value = 0,4." . a rdf:Property; ; rdfs:label "pgv2"@en; rdfs:domain ; ; ; rdfs:comment "Nonlinear gain power value point 2 (Pgv2). Typical value = 0,75." . a rdf:Property; ; rdfs:label "gv3"@en; rdfs:domain ; ; ; rdfs:comment "Nonlinear gain valve position point 3 (GV3). Typical value = 0,5." . a rdf:Property; ; rdfs:label "pgv3"@en; rdfs:domain ; ; ; rdfs:comment "Nonlinear gain power value point 3 (Pgv3). Typical value = 0,91." . a rdf:Property; ; rdfs:label "gv4"@en; rdfs:domain ; ; ; rdfs:comment "Nonlinear gain valve position point 4 (GV4). Typical value = 0,6." . a rdf:Property; ; rdfs:label "pgv4"@en; rdfs:domain ; ; ; rdfs:comment "Nonlinear gain power value point 4 (Pgv4). Typical value = 0,98." . a rdf:Property; ; rdfs:label "gv5"@en; rdfs:domain ; ; ; rdfs:comment "Nonlinear gain valve position point 5 (GV5). Typical value = 1." . a rdf:Property; ; rdfs:label "pgv5"@en; rdfs:domain ; ; ; rdfs:comment "Nonlinear gain power value point 5 (Pgv5). Typical value = 1." . a rdf:Property; ; rdfs:label "gv6"@en; rdfs:domain ; ; ; rdfs:comment "Nonlinear gain valve position point 6 (GV6). Typical value = 0." . a rdf:Property; ; rdfs:label "pgv6"@en; rdfs:domain ; ; ; rdfs:comment "Nonlinear gain power value point 6 (Pgv6). Typical value = 0." . a rdfs:Class; rdfs:label "GovSteamFV4"@en; rdfs:subClassOf ; rdfs:comment "Detailed electro-hydraulic governor for steam unit."; ; . a rdf:Property; ; rdfs:label "kf1"@en; rdfs:domain ; ; ; rdfs:comment "Frequency bias (reciprocal of droop) (Kf1). Typical value = 20." . a rdf:Property; ; rdfs:label "kf3"@en; rdfs:domain ; ; ; rdfs:comment "Frequency control (reciprocal of droop) (Kf3). Typical value = 20." . a rdf:Property; ; rdfs:label "lps"@en; rdfs:domain ; ; ; rdfs:comment "Maximum positive power error (Lps). Typical value = 0,03." . a rdf:Property; ; rdfs:label "lpi"@en; rdfs:domain ; ; ; rdfs:comment "Maximum negative power error (Lpi). Typical value = -0,15." . a rdf:Property; ; rdfs:label "mxef"@en; rdfs:domain ; ; ; rdfs:comment "Upper limit for frequency correction (MXEF). Typical value = 0,05." . a rdf:Property; ; rdfs:label "mnef"@en; rdfs:domain ; ; ; rdfs:comment "Lower limit for frequency correction (MNEF). Typical value = -0,05." . a rdf:Property; ; rdfs:label "crmx"@en; rdfs:domain ; ; ; rdfs:comment "Maximum value of regulator set-point (Crmx). Typical value = 1,2." . a rdf:Property; ; rdfs:label "crmn"@en; rdfs:domain ; ; ; rdfs:comment "Minimum value of regulator set-point (Crmn). Typical value = 0." . a rdf:Property; ; rdfs:label "kpt"@en; rdfs:domain ; ; ; rdfs:comment "Proportional gain of electro-hydraulic regulator (Kpt). Typical value = 0,3." . a rdf:Property; ; rdfs:label "kit"@en; rdfs:domain ; ; ; rdfs:comment "Integral gain of electro-hydraulic regulator (Kit). Typical value = 0,04." . a rdf:Property; ; rdfs:label "rvgmx"@en; rdfs:domain ; ; ; rdfs:comment "Maximum value of integral regulator (Rvgmx). Typical value = 1,2." . a rdf:Property; ; rdfs:label "rvgmn"@en; rdfs:domain ; ; ; rdfs:comment "Minimum value of integral regulator (Rvgmn). Typical value = 0." . a rdf:Property; ; rdfs:label "svmx"@en; rdfs:domain ; ; ; rdfs:comment "Maximum regulator gate opening velocity (Svmx). Typical value = 0,0333." . a rdf:Property; ; rdfs:label "svmn"@en; rdfs:domain ; ; ; rdfs:comment "Maximum regulator gate closing velocity (Svmn). Typical value = -0,0333." . a rdf:Property; ; rdfs:label "srmx"@en; rdfs:domain ; ; ; rdfs:comment "Maximum valve opening (Srmx). Typical value = 1,1." . a rdf:Property; ; rdfs:label "srmn"@en; rdfs:domain ; ; ; rdfs:comment "Minimum valve opening (Srmn). Typical value = 0." . a rdf:Property; ; rdfs:label "kpp"@en; rdfs:domain ; ; ; rdfs:comment "Proportional gain of pressure feedback regulator (Kpp). Typical value = 1." . a rdf:Property; ; rdfs:label "kip"@en; rdfs:domain ; ; ; rdfs:comment "Integral gain of pressure feedback regulator (Kip). Typical value = 0,5." . a rdf:Property; ; rdfs:label "rsmimx"@en; rdfs:domain ; ; ; rdfs:comment "Maximum value of integral regulator (Rsmimx). Typical value = 1,1." . a rdf:Property; ; rdfs:label "rsmimn"@en; rdfs:domain ; ; ; rdfs:comment "Minimum value of integral regulator (Rsmimn). Typical value = 0." . a rdf:Property; ; rdfs:label "kmp1"@en; rdfs:domain ; ; ; rdfs:comment "First gain coefficient of intercept valves characteristic (Kmp1). Typical value = 0,5." . a rdf:Property; ; rdfs:label "kmp2"@en; rdfs:domain ; ; ; rdfs:comment "Second gain coefficient of intercept valves characteristic (Kmp2). Typical value = 3,5." . a rdf:Property; ; rdfs:label "srsmp"@en; rdfs:domain ; ; ; rdfs:comment "Intercept valves characteristic discontinuity point (Srsmp). Typical value = 0,43." . a rdf:Property; ; rdfs:label "ta"@en; rdfs:domain ; ; ; rdfs:comment "Control valves rate opening time (Ta) (>= 0). Typical value = 0,8." . a rdf:Property; ; rdfs:label "tc"@en; rdfs:domain ; ; ; rdfs:comment "Control valves rate closing time (Tc) (>= 0). Typical value = 0,5." . a rdf:Property; ; rdfs:label "ty"@en; rdfs:domain ; ; ; rdfs:comment "Control valves servo time constant (Ty) (>= 0). Typical value = 0,1." . a rdf:Property; ; rdfs:label "yhpmx"@en; rdfs:domain ; ; ; rdfs:comment "Maximum control valve position (Yhpmx). Typical value = 1,1." . a rdf:Property; ; rdfs:label "yhpmn"@en; rdfs:domain ; ; ; rdfs:comment "Minimum control valve position (Yhpmn). Typical value = 0." . a rdf:Property; ; rdfs:label "tam"@en; rdfs:domain ; ; ; rdfs:comment "Intercept valves rate opening time (Tam) (>= 0). Typical value = 0,8." . a rdf:Property; ; rdfs:label "tcm"@en; rdfs:domain ; ; ; rdfs:comment "Intercept valves rate closing time (Tcm) (>= 0). Typical value = 0,5." . a rdf:Property; ; rdfs:label "ympmx"@en; rdfs:domain ; ; ; rdfs:comment "Maximum intercept valve position (Ympmx). Typical value = 1,1." . a rdf:Property; ; rdfs:label "ympmn"@en; rdfs:domain ; ; ; rdfs:comment "Minimum intercept valve position (Ympmn). Typical value = 0." . a rdf:Property; ; rdfs:label "y"@en; rdfs:domain ; ; ; rdfs:comment "Coefficient of linearized equations of turbine (Stodola formulation) (Y). Typical value = 0,13." . a rdf:Property; ; rdfs:label "thp"@en; rdfs:domain ; ; ; rdfs:comment "High pressure (HP) time constant of the turbine (Thp) (>= 0). Typical value = 0,15." . a rdf:Property; ; rdfs:label "trh"@en; rdfs:domain ; ; ; rdfs:comment "Reheater time constant of the turbine (Trh) (>= 0). Typical value = 10." . a rdf:Property; ; rdfs:label "tmp"@en; rdfs:domain ; ; ; rdfs:comment "Low pressure (LP) time constant of the turbine (Tmp) (>= 0). Typical value = 0,4." . a rdf:Property; ; rdfs:label "khp"@en; rdfs:domain ; ; ; rdfs:comment "Fraction of total turbine output generated by HP part (Khp). Typical value = 0,35." . a rdf:Property; ; rdfs:label "pr1"@en; rdfs:domain ; ; ; rdfs:comment "First value of pressure set point static characteristic (Pr1). Typical value = 0,2." . a rdf:Property; ; rdfs:label "pr2"@en; rdfs:domain ; ; ; rdfs:comment "Second value of pressure set point static characteristic, corresponding to Ps0 = 1,0 PU (Pr2). Typical value = 0,75." . a rdf:Property; ; rdfs:label "psmn"@en; rdfs:domain ; ; ; rdfs:comment "Minimum value of pressure set point static characteristic (Psmn). Typical value = 1." . a rdf:Property; ; rdfs:label "kpc"@en; rdfs:domain ; ; ; rdfs:comment "Proportional gain of pressure regulator (Kpc). Typical value = 0,5." . a rdf:Property; ; rdfs:label "kic"@en; rdfs:domain ; ; ; rdfs:comment "Integral gain of pressure regulator (Kic). Typical value = 0,0033." . a rdf:Property; ; rdfs:label "kdc"@en; rdfs:domain ; ; ; rdfs:comment "Derivative gain of pressure regulator (Kdc). Typical value = 1." . a rdf:Property; ; rdfs:label "tdc"@en; rdfs:domain ; ; ; rdfs:comment "Derivative time constant of pressure regulator (Tdc) (>= 0). Typical value = 90." . a rdf:Property; ; rdfs:label "cpsmx"@en; rdfs:domain ; ; ; rdfs:comment "Maximum value of pressure regulator output (Cpsmx). Typical value = 1." . a rdf:Property; ; rdfs:label "cpsmn"@en; rdfs:domain ; ; ; rdfs:comment "Minimum value of pressure regulator output (Cpsmn). Typical value = -1." . a rdf:Property; ; rdfs:label "krc"@en; rdfs:domain ; ; ; rdfs:comment "Maximum variation of fuel flow (Krc). Typical value = 0,05." . a rdf:Property; ; rdfs:label "tf1"@en; rdfs:domain ; ; ; rdfs:comment "Time constant of fuel regulation (Tf1) (>= 0). Typical value = 10." . a rdf:Property; ; rdfs:label "tf2"@en; rdfs:domain ; ; ; rdfs:comment "Time constant of steam chest (Tf2) (>= 0). Typical value = 10." . a rdf:Property; ; rdfs:label "tv"@en; rdfs:domain ; ; ; rdfs:comment "Boiler time constant (Tv) (>= 0). Typical value = 60." . a rdf:Property; ; rdfs:label "ksh"@en; rdfs:domain ; ; ; rdfs:comment "Pressure loss due to flow friction in the boiler tubes (Ksh). Typical value = 0,08." . a rdfs:Class; rdfs:label "GovSteamSGO"@en; rdfs:subClassOf ; rdfs:comment "Simplified steam turbine governor."; ; . a rdf:Property; ; rdfs:label "mwbase"@en; rdfs:domain ; ; ; rdfs:comment "Base for power values (MWbase) (> 0). Unit = MW." . a rdf:Property; ; rdfs:label "t1"@en; rdfs:domain ; ; ; rdfs:comment "Controller lag (T1) (>= 0)." . a rdf:Property; ; rdfs:label "t2"@en; rdfs:domain ; ; ; rdfs:comment "Controller lead compensation (T2) (>= 0)." . a rdf:Property; ; rdfs:label "t3"@en; rdfs:domain ; ; ; rdfs:comment "Governor lag (T3) (> 0). " . a rdf:Property; ; rdfs:label "t4"@en; rdfs:domain ; ; ; rdfs:comment "Delay due to steam inlet volumes associated with steam chest and inlet piping (T4) (>= 0). " . a rdf:Property; ; rdfs:label "t5"@en; rdfs:domain ; ; ; rdfs:comment "Reheater delay including hot and cold leads (T5) (>= 0). " . a rdf:Property; ; rdfs:label "t6"@en; rdfs:domain ; ; ; rdfs:comment "Delay due to IP-LP turbine, crossover pipes and LP end hoods (T6) (>= 0). " . a rdf:Property; ; rdfs:label "k1"@en; rdfs:domain ; ; ; rdfs:comment "One / PU regulation (K1). " . a rdf:Property; ; rdfs:label "k2"@en; rdfs:domain ; ; ; rdfs:comment "Fraction (K2). " . a rdf:Property; ; rdfs:label "k3"@en; rdfs:domain ; ; ; rdfs:comment "Fraction (K3)." . a rdf:Property; ; rdfs:label "pmax"@en; rdfs:domain ; ; ; rdfs:comment "Upper power limit (Pmax) (> GovSteamSGO.pmin). " . a rdf:Property; ; rdfs:label "pmin"@en; rdfs:domain ; ; ; rdfs:comment "Lower power limit (Pmin) (>= 0 and < GovSteamSGO.pmax)." . a ; rdfs:label "TurbineLoadControllerDynamics"@en; rdfs:comment "A turbine load controller acts to maintain turbine power at a set value by continuous adjustment of the turbine governor speed-load reference." . a rdfs:Class; rdfs:label "TurbineLoadControllerDynamics"@en; rdfs:subClassOf ; rdfs:comment "Turbine load controller function block whose behaviour is described by reference to a standard model or by definition of a user-defined model."; . a rdfs:Class; rdfs:label "TurbLCFB1"@en; rdfs:subClassOf ; rdfs:comment "Turbine load controller model developed by WECC. This model represents a supervisory turbine load controller that acts to maintain turbine power at a set value by continuous adjustment of the turbine governor speed-load reference. This model is intended to represent slow reset 'outer loop' controllers managing the action of the turbine governor."; ; . a rdf:Property; ; rdfs:label "mwbase"@en; rdfs:domain ; ; ; rdfs:comment "Base for power values (MWbase) (> 0). Unit = MW." . a rdf:Property; ; rdfs:label "speedReferenceGovernor"@en; rdfs:domain ; ; ; rdfs:comment """Type of turbine governor reference (Type). true = speed reference governor false = load reference governor. Typical value = true.""" . a rdf:Property; ; rdfs:label "db"@en; rdfs:domain ; ; ; rdfs:comment "Controller deadband (db). Typical value = 0." . a rdf:Property; ; rdfs:label "emax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum control error (Emax) (see parameter detail 4). Typical value = 0,02." . a rdf:Property; ; rdfs:label "fb"@en; rdfs:domain ; ; ; rdfs:comment "Frequency bias gain (Fb). Typical value = 0." . a rdf:Property; ; rdfs:label "kp"@en; rdfs:domain ; ; ; rdfs:comment "Proportional gain (Kp). Typical value = 0." . a rdf:Property; ; rdfs:label "ki"@en; rdfs:domain ; ; ; rdfs:comment "Integral gain (Ki). Typical value = 0." . a rdf:Property; ; rdfs:label "fbf"@en; rdfs:domain ; ; ; rdfs:comment """Frequency bias flag (Fbf). true = enable frequency bias false = disable frequency bias. Typical value = false.""" . a rdf:Property; ; rdfs:label "pbf"@en; rdfs:domain ; ; ; rdfs:comment """Power controller flag (Pbf). true = enable load controller false = disable load controller. Typical value = false.""" . a rdf:Property; ; rdfs:label "tpelec"@en; rdfs:domain ; ; ; rdfs:comment "Power transducer time constant (Tpelec) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "irmax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum turbine speed/load reference bias (Irmax) (see parameter detail 3). Typical value = 0." . a rdf:Property; ; rdfs:label "pmwset"@en; rdfs:domain ; ; ; rdfs:comment "Power controller setpoint (Pmwset) (see parameter detail 1). Unit = MW. Typical value = 0." . a ; rdfs:label "MechanicalLoadDynamics"@en; rdfs:comment "A mechanical load represents the variation in a motor's shaft torque or power as a function of shaft speed." . a rdfs:Class; rdfs:label "MechanicalLoadDynamics"@en; rdfs:subClassOf ; rdfs:comment "Mechanical load function block whose behaviour is described by reference to a standard model or by definition of a user-defined model."; . a rdfs:Class; rdfs:label "MechLoad1"@en; rdfs:subClassOf ; rdfs:comment "Mechanical load model type 1."; ; . a rdf:Property; ; rdfs:label "a"@en; rdfs:domain ; ; ; rdfs:comment "Speed squared coefficient (a)." . a rdf:Property; ; rdfs:label "b"@en; rdfs:domain ; ; ; rdfs:comment "Speed coefficient (b)." . a rdf:Property; ; rdfs:label "d"@en; rdfs:domain ; ; ; rdfs:comment "Speed to the exponent coefficient (d)." . a rdf:Property; ; rdfs:label "e"@en; rdfs:domain ; ; ; rdfs:comment "Exponent (e)." . a ; rdfs:label "ExcitationSystemDynamics"@en; rdfs:comment """The excitation system model provides the field voltage (Efd) for a synchronous machine model. It is linked to a specific generator (synchronous machine). The representation of all limits used by the models (not including IEEE standard models) shall comply with the representation defined in the Annex E of the IEEE 421.5-2005, unless specified differently in the documentation of the model. The parameters are different for each excitation system model; the same parameter name can have different meaning in different models.""" . a rdfs:Class; rdfs:label "ExcitationSystemDynamics"@en; rdfs:subClassOf ; rdfs:comment "Excitation system function block whose behaviour is described by reference to a standard model or by definition of a user-defined model."; . a rdf:Property; rdfs:label "ExcitationSystemDynamics"@en; rdfs:comment "Excitation system model with which this voltage compensator is associated."; rdfs:domain ; rdfs:range ; ; ; "Yes" . a rdf:Property; rdfs:label "VoltageCompensatorDynamics"@en; rdfs:comment "Voltage compensator model associated with this excitation system model."; rdfs:domain ; rdfs:range ; ; ; "No" . a rdf:Property; rdfs:label "ExcitationSystemDynamics"@en; rdfs:comment "Excitation system model with which this overexcitation limiter model is associated."; rdfs:domain ; rdfs:range ; ; ; "Yes" . a rdf:Property; rdfs:label "OverexcitationLimiterDynamics"@en; rdfs:comment "Overexcitation limiter model associated with this excitation system model."; rdfs:domain ; rdfs:range ; ; ; "No" . a rdf:Property; rdfs:label "ExcitationSystemDynamics"@en; rdfs:comment "Excitation system model with which this power factor or VAr controller type 2 is associated."; rdfs:domain ; rdfs:range ; ; ; "Yes" . a rdf:Property; rdfs:label "PFVArControllerType2Dynamics"@en; rdfs:comment "Power factor or VAr controller type 2 model associated with this excitation system model."; rdfs:domain ; rdfs:range ; ; ; "No" . a rdf:Property; rdfs:label "ExcitationSystemDynamics"@en; rdfs:comment "Excitation system model with which this discontinuous excitation control model is associated."; rdfs:domain ; rdfs:range ; ; ; "Yes" . a rdf:Property; rdfs:label "DiscontinuousExcitationControlDynamics"@en; rdfs:comment "Discontinuous excitation control model associated with this excitation system model."; rdfs:domain ; rdfs:range ; ; ; "No" . a rdf:Property; rdfs:label "ExcitationSystemDynamics"@en; rdfs:comment "Excitation system model with which this power system stabilizer model is associated."; rdfs:domain ; rdfs:range ; ; ; "Yes" . a rdf:Property; rdfs:label "PowerSystemStabilizerDynamics"@en; rdfs:comment "Power system stabilizer model associated with this excitation system model."; rdfs:domain ; rdfs:range ; ; ; "No" . a rdf:Property; rdfs:label "ExcitationSystemDynamics"@en; rdfs:comment "Excitation system model with which this underexcitation limiter model is associated."; rdfs:domain ; rdfs:range ; ; ; "Yes" . a rdf:Property; rdfs:label "UnderexcitationLimiterDynamics"@en; rdfs:comment "Undrexcitation limiter model associated with this excitation system model."; rdfs:domain ; rdfs:range ; ; ; "No" . a rdf:Property; rdfs:label "ExcitationSystemDynamics"@en; rdfs:comment "Excitation system model with which this power actor or VAr controller type 1 model is associated."; rdfs:domain ; rdfs:range ; ; ; "Yes" . a rdf:Property; rdfs:label "PFVArControllerType1Dynamics"@en; rdfs:comment "Power factor or VAr controller type 1 model associated with this excitation system model."; rdfs:domain ; rdfs:range ; ; ; "No" . a rdfs:Class; rdfs:label "ExcIEEEAC1A"@en; rdfs:subClassOf ; rdfs:comment """IEEE 421.5-2005 type AC1A model. The model represents the field-controlled alternator-rectifier excitation systems designated type AC1A. These excitation systems consist of an alternator main exciter with non-controlled rectifiers. Reference: IEEE 421.5-2005, 6.1."""; ; . a rdf:Property; ; rdfs:label "tb"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator time constant (TB) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "tc"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator time constant (TC) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "ka"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator gain (KA) (> 0). Typical value = 400." . a rdf:Property; ; rdfs:label "ta"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator time constant (TA) (> 0). Typical value = 0,02." . a rdf:Property; ; rdfs:label "vamax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum voltage regulator output (VAMAX) (> 0). Typical value = 14,5." . a rdf:Property; ; rdfs:label "vamin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum voltage regulator output (VAMIN) (< 0). Typical value = -14,5." . a rdf:Property; ; rdfs:label "te"@en; rdfs:domain ; ; ; rdfs:comment "Exciter time constant, integration rate associated with exciter control (TE) (> 0). Typical value = 0,8." . a rdf:Property; ; rdfs:label "kf"@en; rdfs:domain ; ; ; rdfs:comment "Excitation control system stabilizer gains (KF) (>= 0). Typical value = 0,03." . a rdf:Property; ; rdfs:label "tf"@en; rdfs:domain ; ; ; rdfs:comment "Excitation control system stabilizer time constant (TF) (> 0). Typical value = 1." . a rdf:Property; ; rdfs:label "kc"@en; rdfs:domain ; ; ; rdfs:comment "Rectifier loading factor proportional to commutating reactance (KC) (>= 0). Typical value = 0,2." . a rdf:Property; ; rdfs:label "kd"@en; rdfs:domain ; ; ; rdfs:comment "Demagnetizing factor, a function of exciter alternator reactances (KD) (>= 0). Typical value = 0,38." . a rdf:Property; ; rdfs:label "ke"@en; rdfs:domain ; ; ; rdfs:comment "Exciter constant related to self-excited field (KE). Typical value = 1." . a rdf:Property; ; rdfs:label "ve1"@en; rdfs:domain ; ; ; rdfs:comment "Exciter alternator output voltages back of commutating reactance at which saturation is defined (VE1) (> 0). Typical value = 4,18." . a rdf:Property; ; rdfs:label "seve1"@en; rdfs:domain ; ; ; rdfs:comment "Exciter saturation function value at the corresponding exciter voltage, VE1, back of commutating reactance (SE[VE1]) (>= 0). Typical value = 0,1." . a rdf:Property; ; rdfs:label "ve2"@en; rdfs:domain ; ; ; rdfs:comment "Exciter alternator output voltages back of commutating reactance at which saturation is defined (VE2) (> 0). Typical value = 3,14." . a rdf:Property; ; rdfs:label "seve2"@en; rdfs:domain ; ; ; rdfs:comment "Exciter saturation function value at the corresponding exciter voltage, VE2, back of commutating reactance (SE[VE2]) (>= 0). Typical value = 0,03." . a rdf:Property; ; rdfs:label "vrmax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum voltage regulator outputs (VRMAX) (> 0). Typical value = 6,03." . a rdf:Property; ; rdfs:label "vrmin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum voltage regulator outputs (VRMIN) (< 0). Typical value = -5,43." . a rdfs:Class; rdfs:label "ExcIEEEAC2A"@en; rdfs:subClassOf ; rdfs:comment """IEEE 421.5-2005 type AC2A model. The model represents a high initial response field-controlled alternator-rectifier excitation system. The alternator main exciter is used with non-controlled rectifiers. The type AC2A model is similar to that of type AC1A except for the inclusion of exciter time constant compensation and exciter field current limiting elements. Reference: IEEE 421.5-2005, 6.2."""; ; . a rdf:Property; ; rdfs:label "tb"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator time constant (TB) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "tc"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator time constant (TC) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "ka"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator gain (KA) (> 0). Typical value = 400." . a rdf:Property; ; rdfs:label "ta"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator time constant (TA) (> 0). Typical value = 0,02." . a rdf:Property; ; rdfs:label "vamax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum voltage regulator output (VAMAX) (> 0). Typical value = 8." . a rdf:Property; ; rdfs:label "vamin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum voltage regulator output (VAMIN) (< 0). Typical value = -8." . a rdf:Property; ; rdfs:label "kb"@en; rdfs:domain ; ; ; rdfs:comment "Second stage regulator gain (KB) (> 0). Typical value = 25." . a rdf:Property; ; rdfs:label "vrmax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum voltage regulator outputs (VRMAX) (> 0). Typical value = 105." . a rdf:Property; ; rdfs:label "vrmin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum voltage regulator outputs (VRMIN) (< 0). Typical value = -95." . a rdf:Property; ; rdfs:label "te"@en; rdfs:domain ; ; ; rdfs:comment "Exciter time constant, integration rate associated with exciter control (TE) (> 0). Typical value = 0,6." . a rdf:Property; ; rdfs:label "vfemax"@en; rdfs:domain ; ; ; rdfs:comment "Exciter field current limit reference (VFEMAX) (> 0). Typical value = 4,4." . a rdf:Property; ; rdfs:label "kh"@en; rdfs:domain ; ; ; rdfs:comment "Exciter field current feedback gain (KH) (>= 0). Typical value = 1." . a rdf:Property; ; rdfs:label "kf"@en; rdfs:domain ; ; ; rdfs:comment "Excitation control system stabilizer gains (KF) (>= 0). Typical value = 0,03." . a rdf:Property; ; rdfs:label "tf"@en; rdfs:domain ; ; ; rdfs:comment "Excitation control system stabilizer time constant (TF) (> 0). Typical value = 1." . ; rdfs:label "kc"@en; a rdf:Property; rdfs:domain ; ; ; rdfs:comment "Rectifier loading factor proportional to commutating reactance (KC) (>= 0). Typical value = 0,28." . a rdf:Property; ; rdfs:label "kd"@en; rdfs:domain ; ; ; rdfs:comment "Demagnetizing factor, a function of exciter alternator reactances (KD) (>= 0). Typical value = 0,35." . a rdf:Property; ; rdfs:label "ke"@en; rdfs:domain ; ; ; rdfs:comment "Exciter constant related to self-excited field (KE) (>= 0). Typical value = 1." . a rdf:Property; ; rdfs:label "ve1"@en; rdfs:domain ; ; ; rdfs:comment "Exciter alternator output voltages back of commutating reactance at which saturation is defined (VE1) (> 0). Typical value = 4,4." . a rdf:Property; ; rdfs:label "seve1"@en; rdfs:domain ; ; ; rdfs:comment "Exciter saturation function value at the corresponding exciter voltage, VE1, back of commutating reactance (SE[VE1]) (>= 0). Typical value = 0,037." . a rdf:Property; ; rdfs:label "ve2"@en; rdfs:domain ; ; ; rdfs:comment "Exciter alternator output voltages back of commutating reactance at which saturation is defined (VE2) (> 0). Typical value = 3,3." . a rdf:Property; ; rdfs:label "seve2"@en; rdfs:domain ; ; ; rdfs:comment "Exciter saturation function value at the corresponding exciter voltage, VE2, back of commutating reactance (SE[VE2]) (>= 0). Typical value = 0,012." . a rdfs:Class; rdfs:label "ExcIEEEAC3A"@en; rdfs:subClassOf ; rdfs:comment """IEEE 421.5-2005 type AC3A model. The model represents the field-controlled alternator-rectifier excitation systems designated type AC3A. These excitation systems include an alternator main exciter with non-controlled rectifiers. The exciter employs self-excitation, and the voltage regulator power is derived from the exciter output voltage. Therefore, this system has an additional nonlinearity, simulated by the use of a multiplier whose inputs are the voltage regulator command signal, Va, and the exciter output voltage, Efd, times KR. This model is applicable to excitation systems employing static voltage regulators. Reference: IEEE 421.5-2005, 6.3."""; ; . a rdf:Property; ; rdfs:label "tb"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator time constant (TB) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "tc"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator time constant (TC) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "ka"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator gain (KA) (> 0). Typical value = 45,62." . a rdf:Property; ; rdfs:label "ta"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator time constant (TA) (> 0). Typical value = 0,013." . a rdf:Property; ; rdfs:label "vamax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum voltage regulator output (VAMAX) (> 0). Typical value = 1." . a rdf:Property; ; rdfs:label "vamin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum voltage regulator output (VAMIN) (< 0). Typical value = -0,95." . a rdf:Property; ; rdfs:label "te"@en; rdfs:domain ; ; ; rdfs:comment "Exciter time constant, integration rate associated with exciter control (TE) (> 0). Typical value = 1,17." . a rdf:Property; ; rdfs:label "vemin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum exciter voltage output (VEMIN) (<= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "kr"@en; rdfs:domain ; ; ; rdfs:comment "Constant associated with regulator and alternator field power supply (KR) (> 0). Typical value = 3,77." . a rdf:Property; ; rdfs:label "kf"@en; rdfs:domain ; ; ; rdfs:comment "Excitation control system stabilizer gains (KF) (>= 0). Typical value = 0,143." . a rdf:Property; ; rdfs:label "tf"@en; rdfs:domain ; ; ; rdfs:comment "Excitation control system stabilizer time constant (TF) (> 0). Typical value = 1." . a rdf:Property; ; rdfs:label "kn"@en; rdfs:domain ; ; ; rdfs:comment "Excitation control system stabilizer gain (KN) (>= 0). Typical value = 0,05." . a rdf:Property; ; rdfs:label "efdn"@en; rdfs:domain ; ; ; rdfs:comment "Value of Efd at which feedback gain changes (EFDN) (> 0). Typical value = 2,36." . a rdf:Property; ; rdfs:label "kc"@en; rdfs:domain ; ; ; rdfs:comment "Rectifier loading factor proportional to commutating reactance (KC) (>= 0). Typical value = 0,104." . a rdf:Property; ; rdfs:label "kd"@en; rdfs:domain ; ; ; rdfs:comment "Demagnetizing factor, a function of exciter alternator reactances (KD) (>= 0). Typical value = 0,499." . a rdf:Property; ; rdfs:label "ke"@en; rdfs:domain ; ; ; rdfs:comment "Exciter constant related to self-excited field (KE). Typical value = 1." . a rdf:Property; ; rdfs:label "vfemax"@en; rdfs:domain ; ; ; rdfs:comment "Exciter field current limit reference (VFEMAX) (>= 0). Typical value = 16." . a rdf:Property; ; rdfs:label "ve1"@en; rdfs:domain ; ; ; rdfs:comment "Exciter alternator output voltages back of commutating reactance at which saturation is defined (VE1) (> 0). Typical value = 6,24." . a rdf:Property; ; rdfs:label "seve1"@en; rdfs:domain ; ; ; rdfs:comment "Exciter saturation function value at the corresponding exciter voltage, VE1, back of commutating reactance (SE[VE1]) (>= 0). Typical value = 1,143." . a rdf:Property; ; rdfs:label "ve2"@en; rdfs:domain ; ; ; rdfs:comment "Exciter alternator output voltages back of commutating reactance at which saturation is defined (VE2) (> 0). Typical value = 4,68." . a rdf:Property; ; rdfs:label "seve2"@en; rdfs:domain ; ; ; rdfs:comment "Exciter saturation function value at the corresponding exciter voltage, VE2, back of commutating reactance (SE[VE2]) (>= 0). Typical value = 0,1." . a rdfs:Class; rdfs:label "ExcIEEEAC4A"@en; rdfs:subClassOf ; rdfs:comment """IEEE 421.5-2005 type AC4A model. The model represents type AC4A alternator-supplied controlled-rectifier excitation system which is quite different from the other types of AC systems. This high initial response excitation system utilizes a full thyristor bridge in the exciter output circuit. The voltage regulator controls the firing of the thyristor bridges. The exciter alternator uses an independent voltage regulator to control its output voltage to a constant value. These effects are not modelled; however, transient loading effects on the exciter alternator are included. Reference: IEEE 421.5-2005, 6.4."""; ; . a rdf:Property; ; rdfs:label "vimax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum voltage regulator input limit (VIMAX) (> 0). Typical value = 10." . a rdf:Property; ; rdfs:label "vimin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum voltage regulator input limit (VIMIN) (< 0). Typical value = -10." . a rdf:Property; ; rdfs:label "tc"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator time constant (TC) (>= 0). Typical value = 1." . a rdf:Property; ; rdfs:label "tb"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator time constant (TB) (>= 0). Typical value = 10." . a rdf:Property; ; rdfs:label "ka"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator gain (KA) (> 0). Typical value = 200." . a rdf:Property; ; rdfs:label "ta"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator time constant (TA) (> 0). Typical value = 0,015." . a rdf:Property; ; rdfs:label "vrmax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum voltage regulator output (VRMAX) (> 0). Typical value = 5,64." . a rdf:Property; ; rdfs:label "vrmin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum voltage regulator output (VRMIN) (< 0). Typical value = -4,53." . a rdf:Property; ; rdfs:label "kc"@en; rdfs:domain ; ; ; rdfs:comment "Rectifier loading factor proportional to commutating reactance (KC) (>= 0). Typical value = 0." . a rdfs:Class; rdfs:label "ExcIEEEAC5A"@en; rdfs:subClassOf ; rdfs:comment """IEEE 421.5-2005 type AC5A model. The model represents a simplified model for brushless excitation systems. The regulator is supplied from a source, such as a permanent magnet generator, which is not affected by system disturbances. Unlike other AC models, this model uses loaded rather than open circuit exciter saturation data in the same way as it is used for the DC models. Because the model has been widely implemented by the industry, it is sometimes used to represent other types of systems when either detailed data for them are not available or simplified models are required. Reference: IEEE 421.5-2005, 6.5."""; ; . a rdf:Property; ; rdfs:label "ka"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator gain (KA) (> 0). Typical value = 400." . a rdf:Property; ; rdfs:label "ta"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator time constant (TA) (> 0). Typical value = 0,02." . a rdf:Property; ; rdfs:label "vrmax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum voltage regulator output (VRMAX) (> 0). Typical value = 7,3." . a rdf:Property; ; rdfs:label "vrmin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum voltage regulator output (VRMIN) (< 0). Typical value = -7,3." . a rdf:Property; ; rdfs:label "ke"@en; rdfs:domain ; ; ; rdfs:comment "Exciter constant related to self-excited field (KE). Typical value = 1." . a rdf:Property; ; rdfs:label "te"@en; rdfs:domain ; ; ; rdfs:comment "Exciter time constant, integration rate associated with exciter control (TE) (> 0). Typical value = 0,8." . a rdf:Property; ; rdfs:label "kf"@en; rdfs:domain ; ; ; rdfs:comment "Excitation control system stabilizer gains (KF) (>= 0). Typical value = 0,03." . a rdf:Property; ; rdfs:label "tf1"@en; rdfs:domain ; ; ; rdfs:comment "Excitation control system stabilizer time constant (TF1) (> 0). Typical value = 1." . a rdf:Property; ; rdfs:label "tf2"@en; rdfs:domain ; ; ; rdfs:comment "Excitation control system stabilizer time constant (TF2) (>= 0). Typical value = 1." . a rdf:Property; ; rdfs:label "tf3"@en; rdfs:domain ; ; ; rdfs:comment "Excitation control system stabilizer time constant (TF3) (>= 0). Typical value = 1." . a rdf:Property; ; rdfs:label "efd1"@en; rdfs:domain ; ; ; rdfs:comment "Exciter voltage at which exciter saturation is defined (EFD1) (> 0). Typical value = 5,6." . a rdf:Property; ; rdfs:label "seefd1"@en; rdfs:domain ; ; ; rdfs:comment "Exciter saturation function value at the corresponding exciter voltage, EFD1 (SE[EFD1]) (>= 0). Typical value = 0,86." . a rdf:Property; ; rdfs:label "efd2"@en; rdfs:domain ; ; ; rdfs:comment "Exciter voltage at which exciter saturation is defined (EFD2) (> 0). Typical value = 4,2." . a rdf:Property; ; rdfs:label "seefd2"@en; rdfs:domain ; ; ; rdfs:comment "Exciter saturation function value at the corresponding exciter voltage, EFD2 (SE[EFD2]) (>= 0). Typical value = 0,5." . a rdfs:Class; rdfs:label "ExcIEEEAC6A"@en; rdfs:subClassOf ; rdfs:comment """IEEE 421.5-2005 type AC6A model. The model represents field-controlled alternator-rectifier excitation systems with system-supplied electronic voltage regulators. The maximum output of the regulator, VR, is a function of terminal voltage, VT. The field current limiter included in the original model AC6A remains in the 2005 update. Reference: IEEE 421.5-2005, 6.6. """; ; . a rdf:Property; ; rdfs:label "ka"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator gain (KA) (> 0). Typical value = 536." . a rdf:Property; ; rdfs:label "ta"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator time constant (TA) (>= 0). Typical value = 0,086." . a rdf:Property; ; rdfs:label "tk"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator time constant (TK) (>= 0). Typical value = 0,18." . a rdf:Property; ; rdfs:label "tb"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator time constant (TB) (>= 0). Typical value = 9." . a rdf:Property; ; rdfs:label "tc"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator time constant (TC) (>= 0). Typical value = 3." . a rdf:Property; ; rdfs:label "vamax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum voltage regulator output (VAMAX) (> 0). Typical value = 75." . a rdf:Property; ; rdfs:label "vamin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum voltage regulator output (VAMIN) (< 0). Typical value = -75." . a rdf:Property; ; rdfs:label "vrmax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum voltage regulator output (VRMAX) (> 0). Typical value = 44." . a rdf:Property; ; rdfs:label "vrmin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum voltage regulator output (VRMIN) (< 0). Typical value = -36." . a rdf:Property; ; rdfs:label "te"@en; rdfs:domain ; ; ; rdfs:comment "Exciter time constant, integration rate associated with exciter control (TE) (> 0). Typical value = 1." . a rdf:Property; ; rdfs:label "kh"@en; rdfs:domain ; ; ; rdfs:comment "Exciter field current limiter gain (KH) (>= 0). Typical value = 92." . a rdf:Property; ; rdfs:label "tj"@en; rdfs:domain ; ; ; rdfs:comment "Exciter field current limiter time constant (TJ) (>= 0). Typical value = 0,02." . a rdf:Property; ; rdfs:label "th"@en; rdfs:domain ; ; ; rdfs:comment "Exciter field current limiter time constant (TH) (> 0). Typical value = 0,08." . a rdf:Property; ; rdfs:label "vfelim"@en; rdfs:domain ; ; ; rdfs:comment "Exciter field current limit reference (VFELIM) (> 0). Typical value = 19." . a rdf:Property; ; rdfs:label "vhmax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum field current limiter signal reference (VHMAX) (> 0). Typical value = 75." . a rdf:Property; ; rdfs:label "kc"@en; rdfs:domain ; ; ; rdfs:comment "Rectifier loading factor proportional to commutating reactance (KC) (>= 0). Typical value = 0,173." . a rdf:Property; ; rdfs:label "kd"@en; rdfs:domain ; ; ; rdfs:comment "Demagnetizing factor, a function of exciter alternator reactances (KD) (>= 0). Typical value = 1,91." . a rdf:Property; ; rdfs:label "ke"@en; rdfs:domain ; ; ; rdfs:comment "Exciter constant related to self-excited field (KE). Typical value = 1,6." . a rdf:Property; ; rdfs:label "ve1"@en; rdfs:domain ; ; ; rdfs:comment "Exciter alternator output voltages back of commutating reactance at which saturation is defined (VE1) (> 0). Typical value = 7,4." . a rdf:Property; ; rdfs:label "seve1"@en; rdfs:domain ; ; ; rdfs:comment "Exciter saturation function value at the corresponding exciter voltage, VE1, back of commutating reactance (SE[VE1]) (>= 0). Typical value = 0,214." . a rdf:Property; ; rdfs:label "ve2"@en; rdfs:domain ; ; ; rdfs:comment "Exciter alternator output voltages back of commutating reactance at which saturation is defined (VE2) (> 0). Typical value = 5,55." . a rdf:Property; ; rdfs:label "seve2"@en; rdfs:domain ; ; ; rdfs:comment "Exciter saturation function value at the corresponding exciter voltage, VE2, back of commutating reactance (SE[VE2]) (>= 0). Typical value = 0,044." . a rdfs:Class; rdfs:label "ExcIEEEAC7B"@en; rdfs:subClassOf ; rdfs:comment """IEEE 421.5-2005 type AC7B model. The model represents excitation systems which consist of an AC alternator with either stationary or rotating rectifiers to produce the DC field requirements. It is an upgrade to earlier AC excitation systems, which replace only the controls but retain the AC alternator and diode rectifier bridge. Reference: IEEE 421.5-2005, 6.7. Note, however, that in IEEE 421.5-2005, the [1 / sTE] block is shown as [1 / (1 + sTE)], which is incorrect."""; ; . a rdf:Property; ; rdfs:label "kpr"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator proportional gain (KPR) (> 0 if ExcIEEEAC7B.kir = 0). Typical value = 4,24." . a rdf:Property; ; rdfs:label "kir"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator integral gain (KIR) (>= 0). Typical value = 4,24." . a rdf:Property; ; rdfs:label "kdr"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator derivative gain (KDR) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "tdr"@en; rdfs:domain ; ; ; rdfs:comment "Lag time constant (TDR) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "vrmax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum voltage regulator output (VRMAX) (> 0). Typical value = 5,79." . a rdf:Property; ; rdfs:label "vrmin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum voltage regulator output (VRMIN) (< 0). Typical value = -5,79." . a rdf:Property; ; rdfs:label "kpa"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator proportional gain (KPA) (> 0 if ExcIEEEAC7B.kia = 0). Typical value = 65,36." . a rdf:Property; ; rdfs:label "kia"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator integral gain (KIA) (>= 0). Typical value = 59,69." . a rdf:Property; ; rdfs:label "vamax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum voltage regulator output (VAMAX) (> 0). Typical value = 1." . a rdf:Property; ; rdfs:label "vamin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum voltage regulator output (VAMIN) (< 0). Typical value = -0,95." . a rdf:Property; ; rdfs:label "kp"@en; rdfs:domain ; ; ; rdfs:comment "Potential circuit gain coefficient (KP) (> 0). Typical value = 4,96." . a rdf:Property; ; rdfs:label "kl"@en; rdfs:domain ; ; ; rdfs:comment "Exciter field voltage lower limit parameter (KL). Typical value = 10." . a rdf:Property; ; rdfs:label "te"@en; rdfs:domain ; ; ; rdfs:comment "Exciter time constant, integration rate associated with exciter control (TE) (> 0). Typical value = 1,1." . a rdf:Property; ; rdfs:label "vfemax"@en; rdfs:domain ; ; ; rdfs:comment "Exciter field current limit reference (VFEMAX). Typical value = 6,9." . a rdf:Property; ; rdfs:label "vemin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum exciter voltage output (VEMIN) (<= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "ke"@en; rdfs:domain ; ; ; rdfs:comment "Exciter constant related to self-excited field (KE). Typical value = 1." . a rdf:Property; ; rdfs:label "kc"@en; rdfs:domain ; ; ; rdfs:comment "Rectifier loading factor proportional to commutating reactance (KC) (>= 0). Typical value = 0,18." . a rdf:Property; ; rdfs:label "kd"@en; rdfs:domain ; ; ; rdfs:comment "Demagnetizing factor, a function of exciter alternator reactances (KD) (>= 0). Typical value = 0,02." . a rdf:Property; ; rdfs:label "kf1"@en; rdfs:domain ; ; ; rdfs:comment "Excitation control system stabilizer gain (KF1) (>= 0). Typical value = 0,212." . a rdf:Property; ; rdfs:label "kf2"@en; rdfs:domain ; ; ; rdfs:comment "Excitation control system stabilizer gain (KF2) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "kf3"@en; rdfs:domain ; ; ; rdfs:comment "Excitation control system stabilizer gain (KF3) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "tf"@en; rdfs:domain ; ; ; rdfs:comment "Excitation control system stabilizer time constant (TF) (> 0). Typical value = 1." . a rdf:Property; ; rdfs:label "ve1"@en; rdfs:domain ; ; ; rdfs:comment "Exciter alternator output voltages back of commutating reactance at which saturation is defined (VE1) (> 0). Typical value = 6,3." . a rdf:Property; ; rdfs:label "seve1"@en; rdfs:domain ; ; ; rdfs:comment "Exciter saturation function value at the corresponding exciter voltage, VE1, back of commutating reactance (SE[VE1]) (>= 0). Typical value = 0,44." . a rdf:Property; ; rdfs:label "ve2"@en; rdfs:domain ; ; ; rdfs:comment "Exciter alternator output voltages back of commutating reactance at which saturation is defined (VE2) (> 0). Typical value = 3,02." . a rdf:Property; ; rdfs:label "seve2"@en; rdfs:domain ; ; ; rdfs:comment "Exciter saturation function value at the corresponding exciter voltage, VE2, back of commutating reactance (SE[VE2]) (>= 0). Typical value = 0,075." . a rdfs:Class; rdfs:label "ExcIEEEAC8B"@en; rdfs:subClassOf ; rdfs:comment """IEEE 421.5-2005 type AC8B model. This model represents a PID voltage regulator with either a brushless exciter or DC exciter. The AVR in this model consists of PID control, with separate constants for the proportional (KPR), integral (KIR), and derivative (KDR) gains. The representation of the brushless exciter (TE, KE, SE, KC, KD) is similar to the model type AC2A. The type AC8B model can be used to represent static voltage regulators applied to brushless excitation systems. Digitally based voltage regulators feeding DC rotating main exciters can be represented with the AC type AC8B model with the parameters KC and KD set to 0. For thyristor power stages fed from the generator terminals, the limits VRMAX and VRMIN should be a function of terminal voltage: VT x VRMAX and VT x VRMIN. Reference: IEEE 421.5-2005, 6.8. """; ; . a rdf:Property; ; rdfs:label "kpr"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator proportional gain (KPR) (> 0 if ExcIEEEAC8B.kir = 0). Typical value = 80." . a rdf:Property; ; rdfs:label "kir"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator integral gain (KIR) (>= 0). Typical value = 5." . a rdf:Property; ; rdfs:label "kdr"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator derivative gain (KDR) (>= 0). Typical value = 10." . a rdf:Property; ; rdfs:label "tdr"@en; rdfs:domain ; ; ; rdfs:comment "Lag time constant (TDR) (> 0). Typical value = 0,1." . a rdf:Property; ; rdfs:label "vrmax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum voltage regulator output (VRMAX) (> 0). Typical value = 35." . a rdf:Property; ; rdfs:label "vrmin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum voltage regulator output (VRMIN) (<= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "ka"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator gain (KA) (> 0). Typical value = 1." . a rdf:Property; ; rdfs:label "ta"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator time constant (TA) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "te"@en; rdfs:domain ; ; ; rdfs:comment "Exciter time constant, integration rate associated with exciter control (TE) (> 0). Typical value = 1,2." . a rdf:Property; ; rdfs:label "vfemax"@en; rdfs:domain ; ; ; rdfs:comment "Exciter field current limit reference (VFEMAX). Typical value = 6." . a rdf:Property; ; rdfs:label "vemin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum exciter voltage output (VEMIN) (<= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "ke"@en; rdfs:domain ; ; ; rdfs:comment "Exciter constant related to self-excited field (KE). Typical value = 1." . a rdf:Property; ; rdfs:label "kc"@en; rdfs:domain ; ; ; rdfs:comment "Rectifier loading factor proportional to commutating reactance (KC) (>= 0). Typical value = 0,55." . a rdf:Property; ; rdfs:label "kd"@en; rdfs:domain ; ; ; rdfs:comment "Demagnetizing factor, a function of exciter alternator reactances (KD) (>= 0). Typical value = 1,1." . a rdf:Property; ; rdfs:label "ve1"@en; rdfs:domain ; ; ; rdfs:comment "Exciter alternator output voltages back of commutating reactance at which saturation is defined (VE1) (> 0). Typical value = 6,5." . a rdf:Property; ; rdfs:label "seve1"@en; rdfs:domain ; ; ; rdfs:comment "Exciter saturation function value at the corresponding exciter voltage, VE1, back of commutating reactance (SE[VE1]) (>= 0). Typical value = 0,3." . a rdf:Property; ; rdfs:label "ve2"@en; rdfs:domain ; ; ; rdfs:comment "Exciter alternator output voltages back of commutating reactance at which saturation is defined (VE2) (> 0). Typical value = 9." . a rdf:Property; ; rdfs:label "seve2"@en; rdfs:domain ; ; ; rdfs:comment "Exciter saturation function value at the corresponding exciter voltage, VE2, back of commutating reactance (SE[VE2]) (>= 0). Typical value = 3." . a rdfs:Class; rdfs:label "ExcIEEEDC1A"@en; rdfs:subClassOf ; rdfs:comment """IEEE 421.5-2005 type DC1A model. This model represents field-controlled DC commutator exciters with continuously acting voltage regulators (especially the direct-acting rheostatic, rotating amplifier, and magnetic amplifier types). Because this model has been widely implemented by the industry, it is sometimes used to represent other types of systems when detailed data for them are not available or when a simplified model is required. Reference: IEEE 421.5-2005, 5.1. """; ; . a rdf:Property; ; rdfs:label "ka"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator gain (KA) (> 0). Typical value = 46." . a rdf:Property; ; rdfs:label "ta"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator time constant (TA) (> 0). Typical value = 0,06." . a rdf:Property; ; rdfs:label "tb"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator time constant (TB) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "tc"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator time constant (TC) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "vrmax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum voltage regulator output (VRMAX) (> ExcIEEEDC1A.vrmin). Typical value = 1." . a rdf:Property; ; rdfs:label "vrmin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum voltage regulator output (VRMIN) (< 0 and < ExcIEEEDC1A.vrmax). Typical value = -0,9." . a rdf:Property; ; rdfs:label "ke"@en; rdfs:domain ; ; ; rdfs:comment "Exciter constant related to self-excited field (KE). Typical value = 0." . a rdf:Property; ; rdfs:label "te"@en; rdfs:domain ; ; ; rdfs:comment "Exciter time constant, integration rate associated with exciter control (TE) (> 0). Typical value = 0,46." . a rdf:Property; ; rdfs:label "kf"@en; rdfs:domain ; ; ; rdfs:comment "Excitation control system stabilizer gain (KF) (>= 0). Typical value = 0.1." . a rdf:Property; ; rdfs:label "tf"@en; rdfs:domain ; ; ; rdfs:comment "Excitation control system stabilizer time constant (TF) (> 0). Typical value = 1." . a rdf:Property; ; rdfs:label "efd1"@en; rdfs:domain ; ; ; rdfs:comment "Exciter voltage at which exciter saturation is defined (EFD1) (> 0). Typical value = 3,1." . a rdf:Property; ; rdfs:label "seefd1"@en; rdfs:domain ; ; ; rdfs:comment "Exciter saturation function value at the corresponding exciter voltage, EFD1 (SE[EFD1]) (>= 0). Typical value = 0.33." . a rdf:Property; ; rdfs:label "efd2"@en; rdfs:domain ; ; ; rdfs:comment "Exciter voltage at which exciter saturation is defined (EFD2) (> 0). Typical value = 2,3." . a rdf:Property; ; rdfs:label "seefd2"@en; rdfs:domain ; ; ; rdfs:comment "Exciter saturation function value at the corresponding exciter voltage, EFD2 (SE[EFD2]) (>= 0). Typical value = 0,1." . a rdf:Property; ; rdfs:label "uelin"@en; rdfs:domain ; ; ; rdfs:comment """UEL input (uelin). true = input is connected to the HV gate false = input connects to the error signal. Typical value = true.""" . a rdf:Property; ; rdfs:label "exclim"@en; rdfs:domain ; ; ; rdfs:comment """(exclim). IEEE standard is ambiguous about lower limit on exciter output. true = a lower limit of zero is applied to integrator output false = a lower limit of zero is not applied to integrator output. Typical value = true.""" . a rdfs:Class; rdfs:label "ExcIEEEDC2A"@en; rdfs:subClassOf ; rdfs:comment """IEEE 421.5-2005 type DC2A model. This model represents field-controlled DC commutator exciters with continuously acting voltage regulators having supplies obtained from the generator or auxiliary bus. It differs from the type DC1A model only in the voltage regulator output limits, which are now proportional to terminal voltage VT. It is representative of solid-state replacements for various forms of older mechanical and rotating amplifier regulating equipment connected to DC commutator exciters. Reference: IEEE 421.5-2005, 5.2. """; ; . a rdf:Property; ; rdfs:label "efd1"@en; rdfs:domain ; ; ; rdfs:comment "Exciter voltage at which exciter saturation is defined (EFD1) (> 0). Typical value = 3,05." . a rdf:Property; ; rdfs:label "efd2"@en; rdfs:domain ; ; ; rdfs:comment "Exciter voltage at which exciter saturation is defined (EFD2) (> 0). Typical value = 2,29." . a rdf:Property; ; rdfs:label "exclim"@en; rdfs:domain ; ; ; rdfs:comment "(exclim). IEEE standard is ambiguous about lower limit on exciter output. Typical value = - 999 which means that there is no limit applied." . ; rdfs:label "ka"@en; a rdf:Property; rdfs:domain ; ; ; rdfs:comment "Voltage regulator gain (KA) (> 0). Typical value = 300." . a rdf:Property; ; rdfs:label "ke"@en; rdfs:domain ; ; ; rdfs:comment "Exciter constant related to self-excited field (KE). Typical value = 1." . a rdf:Property; ; rdfs:label "kf"@en; rdfs:domain ; ; ; rdfs:comment "Excitation control system stabilizer gain (KF) (>= 0). Typical value = 0,1." . a rdf:Property; ; rdfs:label "seefd1"@en; rdfs:domain ; ; ; rdfs:comment "Exciter saturation function value at the corresponding exciter voltage, EFD1 (SE[EFD1]) (>= 0). Typical value = 0,279." . a rdf:Property; ; rdfs:label "seefd2"@en; rdfs:domain ; ; ; rdfs:comment "Exciter saturation function value at the corresponding exciter voltage, EFD2 (SE[EFD2]) (>= 0). Typical value = 0,117." . a rdf:Property; ; rdfs:label "ta"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator time constant (TA) (> 0). Typical value = 0,01." . a rdf:Property; ; rdfs:label "tb"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator time constant (TB) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "tc"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator time constant (TC) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "te"@en; rdfs:domain ; ; ; rdfs:comment "Exciter time constant, integration rate associated with exciter control (TE) (> 0). Typical value = 1,33." . a rdf:Property; ; rdfs:label "tf"@en; rdfs:domain ; ; ; rdfs:comment "Excitation control system stabilizer time constant (TF) (> 0). Typical value = 0,675." . a rdf:Property; ; rdfs:label "uelin"@en; rdfs:domain ; ; ; rdfs:comment """UEL input (uelin). true = input is connected to the HV gate false = input connects to the error signal. Typical value = true.""" . a rdf:Property; ; rdfs:label "vrmax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum voltage regulator output (VRMAX)(> ExcIEEEDC2A.vrmin). Typical value = 4,95." . a rdf:Property; ; rdfs:label "vrmin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum voltage regulator output (VRMIN) (< 0 and < ExcIEEEDC2A.vrmax). Typical value = -4,9." . a rdfs:Class; rdfs:label "ExcIEEEDC3A"@en; rdfs:subClassOf ; rdfs:comment """IEEE 421.5-2005 type DC3A model. This model represents older systems, in particular those DC commutator exciters with non-continuously acting regulators that were commonly used before the development of the continuously acting varieties. These systems respond at basically two different rates, depending upon the magnitude of voltage error. For small errors, adjustment is made periodically with a signal to a motor-operated rheostat. Larger errors cause resistors to be quickly shorted or inserted and a strong forcing signal applied to the exciter. Continuous motion of the motor-operated rheostat occurs for these larger error signals, even though it is bypassed by contactor action. Reference: IEEE 421.5-2005, 5.3. """; ; . a rdf:Property; ; rdfs:label "trh"@en; rdfs:domain ; ; ; rdfs:comment "Rheostat travel time (TRH) (> 0). Typical value = 20." . a rdf:Property; ; rdfs:label "kv"@en; rdfs:domain ; ; ; rdfs:comment "Fast raise/lower contact setting (KV) (> 0). Typical value = 0,05." . a rdf:Property; ; rdfs:label "vrmax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum voltage regulator output (VRMAX) (> 0). Typical value = 1." . a rdf:Property; ; rdfs:label "vrmin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum voltage regulator output (VRMIN) (<= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "te"@en; rdfs:domain ; ; ; rdfs:comment "Exciter time constant, integration rate associated with exciter control (TE) (> 0). Typical value = 0,5." . a rdf:Property; ; rdfs:label "ke"@en; rdfs:domain ; ; ; rdfs:comment "Exciter constant related to self-excited field (KE). Typical value = 0,05." . a rdf:Property; ; rdfs:label "efd1"@en; rdfs:domain ; ; ; rdfs:comment "Exciter voltage at which exciter saturation is defined (EFD1) (> 0). Typical value = 3,375." . a rdf:Property; ; rdfs:label "seefd1"@en; rdfs:domain ; ; ; rdfs:comment "Exciter saturation function value at the corresponding exciter voltage, EFD1 (SE[EFD1]) (>= 0). Typical value = 0,267." . a rdf:Property; ; rdfs:label "efd2"@en; rdfs:domain ; ; ; rdfs:comment "Exciter voltage at which exciter saturation is defined (EFD2) (> 0). Typical value = 3,15." . a rdf:Property; ; rdfs:label "seefd2"@en; rdfs:domain ; ; ; rdfs:comment "Exciter saturation function value at the corresponding exciter voltage, EFD2 (SE[EFD2]) (>= 0). Typical value = 0,068." . a rdf:Property; ; rdfs:label "exclim"@en; rdfs:domain ; ; ; rdfs:comment """(exclim). IEEE standard is ambiguous about lower limit on exciter output. true = a lower limit of zero is applied to integrator output false = a lower limit of zero is not applied to integrator output. Typical value = true.""" . a rdfs:Class; rdfs:label "ExcIEEEDC4B"@en; rdfs:subClassOf ; rdfs:comment """IEEE 421.5-2005 type DC4B model. These excitation systems utilize a field-controlled DC commutator exciter with a continuously acting voltage regulator having supplies obtained from the generator or auxiliary bus. Reference: IEEE 421.5-2005, 5.4. """; ; . a rdf:Property; ; rdfs:label "ka"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator gain (KA) (> 0). Typical value = 1." . a rdf:Property; ; rdfs:label "ta"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator time constant (TA) (> 0). Typical value = 0,2." . a rdf:Property; ; rdfs:label "kp"@en; rdfs:domain ; ; ; rdfs:comment "Regulator proportional gain (KP) (>= 0). Typical value = 20." . a rdf:Property; ; rdfs:label "ki"@en; rdfs:domain ; ; ; rdfs:comment "Regulator integral gain (KI) (>= 0). Typical value = 20." . a rdf:Property; ; rdfs:label "kd"@en; rdfs:domain ; ; ; rdfs:comment "Regulator derivative gain (KD) (>= 0). Typical value = 20." . a rdf:Property; ; rdfs:label "td"@en; rdfs:domain ; ; ; rdfs:comment "Regulator derivative filter time constant (TD) (> 0 if ExcIEEEDC4B.kd > 0). Typical value = 0,01." . a rdf:Property; ; rdfs:label "vrmax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum voltage regulator output (VRMAX) (> ExcIEEEDC4B.vrmin). Typical value = 2,7." . a rdf:Property; ; rdfs:label "vrmin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum voltage regulator output (VRMIN) (<= 0 and < ExcIEEEDC4B.vrmax). Typical value = -0,9." . a rdf:Property; ; rdfs:label "ke"@en; rdfs:domain ; ; ; rdfs:comment "Exciter constant related to self-excited field (KE). Typical value = 1." . a rdf:Property; ; rdfs:label "te"@en; rdfs:domain ; ; ; rdfs:comment "Exciter time constant, integration rate associated with exciter control (TE) (> 0). Typical value = 0,8." . a rdf:Property; ; rdfs:label "kf"@en; rdfs:domain ; ; ; rdfs:comment "Excitation control system stabilizer gain (KF) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "tf"@en; rdfs:domain ; ; ; rdfs:comment "Excitation control system stabilizer time constant (TF) (>= 0). Typical value = 1." . a rdf:Property; ; rdfs:label "efd1"@en; rdfs:domain ; ; ; rdfs:comment "Exciter voltage at which exciter saturation is defined (EFD1) (> 0). Typical value = 1,75." . a rdf:Property; ; rdfs:label "seefd1"@en; rdfs:domain ; ; ; rdfs:comment "Exciter saturation function value at the corresponding exciter voltage, EFD1 (SE[EFD1]) (>= 0). Typical value = 0,08." . a rdf:Property; ; rdfs:label "efd2"@en; rdfs:domain ; ; ; rdfs:comment "Exciter voltage at which exciter saturation is defined (EFD2) (> 0). Typical value = 2,33." . a rdf:Property; ; rdfs:label "seefd2"@en; rdfs:domain ; ; ; rdfs:comment "Exciter saturation function value at the corresponding exciter voltage, EFD2 (SE[EFD2]) (>= 0). Typical value = 0,27." . a rdf:Property; ; rdfs:label "vemin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum exciter voltage output (VEMIN) (<= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "oelin"@en; rdfs:domain ; ; ; rdfs:comment """OEL input (OELin). true = LV gate false = subtract from error signal. Typical value = true.""" . a rdf:Property; ; rdfs:label "uelin"@en; rdfs:domain ; ; ; rdfs:comment """UEL input (UELin). true = HV gate false = add to error signal. Typical value = true.""" . a rdfs:Class; rdfs:label "ExcIEEEST1A"@en; rdfs:subClassOf ; rdfs:comment """IEEE 421.5-2005 type ST1A model. This model represents systems in which excitation power is supplied through a transformer from the generator terminals (or the unit’s auxiliary bus) and is regulated by a controlled rectifier. The maximum exciter voltage available from such systems is directly related to the generator terminal voltage. Reference: IEEE 421.5-2005, 7.1. """; ; . a rdf:Property; ; rdfs:label "ilr"@en; rdfs:domain ; ; ; rdfs:comment "Exciter output current limit reference (ILR). Typical value = 0." . a rdf:Property; ; rdfs:label "ka"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator gain (KA) (> 0). Typical value = 190." . a rdf:Property; ; rdfs:label "kc"@en; rdfs:domain ; ; ; rdfs:comment "Rectifier loading factor proportional to commutating reactance (KC) (>= 0). Typical value = 0,08." . a rdf:Property; ; rdfs:label "kf"@en; rdfs:domain ; ; ; rdfs:comment "Excitation control system stabilizer gains (KF) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "klr"@en; rdfs:domain ; ; ; rdfs:comment "Exciter output current limiter gain (KLR). Typical value = 0." . a rdf:Property; ; rdfs:label "pssin"@en; rdfs:domain ; ; ; rdfs:comment """Selector of the Power System Stabilizer (PSS) input (PSSin). true = PSS input (Vs) added to error signal false = PSS input (Vs) added to voltage regulator output. Typical value = true.""" . a rdf:Property; ; rdfs:label "ta"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator time constant (TA) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "tb"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator time constant (TB) (>= 0). Typical value = 10." . a rdf:Property; ; rdfs:label "tb1"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator time constant (TB1) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "tc"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator time constant (TC) (>= 0). Typical value = 1." . a rdf:Property; ; rdfs:label "tc1"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator time constant (TC1) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "tf"@en; rdfs:domain ; ; ; rdfs:comment "Excitation control system stabilizer time constant (TF) (>= 0). Typical value = 1." . a rdf:Property; ; rdfs:label "uelin"@en; rdfs:domain ; rdfs:range ; ; rdfs:comment "Selector of the connection of the UEL input (UELin). Typical value = ignoreUELsignal." . a rdf:Property; ; rdfs:label "vamax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum voltage regulator output (VAMAX) (> 0). Typical value = 14,5." . a rdf:Property; ; rdfs:label "vamin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum voltage regulator output (VAMIN) (< 0). Typical value = -14,5." . a rdf:Property; ; rdfs:label "vimax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum voltage regulator input limit (VIMAX) (> 0). Typical value = 999." . a rdf:Property; ; rdfs:label "vimin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum voltage regulator input limit (VIMIN) (< 0). Typical value = -999." . a rdf:Property; ; rdfs:label "vrmax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum voltage regulator outputs (VRMAX) (> 0). Typical value = 7,8." . a rdf:Property; ; rdfs:label "vrmin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum voltage regulator outputs (VRMIN) (< 0). Typical value = -6,7." . a rdfs:Class; rdfs:label "ExcIEEEST2A"@en; rdfs:subClassOf ; rdfs:comment """IEEE 421.5-2005 type ST2A model. Some static systems use both current and voltage sources (generator terminal quantities) to comprise the power source. The regulator controls the exciter output through controlled saturation of the power transformer components. These compound-source rectifier excitation systems are designated type ST2A and are represented by ExcIEEEST2A. Reference: IEEE 421.5-2005, 7.2. """; ; . a rdf:Property; ; rdfs:label "ka"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator gain (KA) (> 0). Typical value = 120." . a rdf:Property; ; rdfs:label "ta"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator time constant (TA) (> 0). Typical value = 0,15." . a rdf:Property; ; rdfs:label "vrmax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum voltage regulator outputs (VRMAX) (> 0). Typical value = 1." . a rdf:Property; ; rdfs:label "vrmin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum voltage regulator outputs (VRMIN) (<= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "ke"@en; rdfs:domain ; ; ; rdfs:comment "Exciter constant related to self-excited field (KE). Typical value = 1." . a rdf:Property; ; rdfs:label "te"@en; rdfs:domain ; ; ; rdfs:comment "Exciter time constant, integration rate associated with exciter control (TE) (> 0). Typical value = 0,5." . a rdf:Property; ; rdfs:label "kf"@en; rdfs:domain ; ; ; rdfs:comment "Excitation control system stabilizer gains (KF) (>= 0). Typical value = 0,05." . a rdf:Property; ; rdfs:label "tf"@en; rdfs:domain ; ; ; rdfs:comment "Excitation control system stabilizer time constant (TF) (>= 0). Typical value = 1." . a rdf:Property; ; rdfs:label "kp"@en; rdfs:domain ; ; ; rdfs:comment "Potential circuit gain coefficient (KP) (>= 0). Typical value = 4,88." . a rdf:Property; ; rdfs:label "ki"@en; rdfs:domain ; ; ; rdfs:comment "Potential circuit gain coefficient (KI) (>= 0). Typical value = 8." . a rdf:Property; ; rdfs:label "kc"@en; rdfs:domain ; ; ; rdfs:comment "Rectifier loading factor proportional to commutating reactance (KC) (>= 0). Typical value = 1,82." . a rdf:Property; ; rdfs:label "efdmax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum field voltage (EFDMax) (>= 0). Typical value = 99." . a rdf:Property; ; rdfs:label "uelin"@en; rdfs:domain ; ; ; rdfs:comment """UEL input (UELin). true = HV gate false = add to error signal. Typical value = true.""" . a rdfs:Class; rdfs:label "ExcIEEEST3A"@en; rdfs:subClassOf ; rdfs:comment """IEEE 421.5-2005 type ST3A model. Some static systems utilize a field voltage control loop to linearize the exciter control characteristic. This also makes the output independent of supply source variations until supply limitations are reached. These systems utilize a variety of controlled-rectifier designs: full thyristor complements or hybrid bridges in either series or shunt configurations. The power source can consist of only a potential source, either fed from the machine terminals or from internal windings. Some designs can have compound power sources utilizing both machine potential and current. These power sources are represented as phasor combinations of machine terminal current and voltage and are accommodated by suitable parameters in model type ST3A which is represented by ExcIEEEST3A. Reference: IEEE 421.5-2005, 7.3. """; ; . a rdf:Property; ; rdfs:label "vimax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum voltage regulator input limit (VIMAX) (> 0). Typical value = 0,2." . a rdf:Property; ; rdfs:label "vimin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum voltage regulator input limit (VIMIN) (< 0). Typical value = -0,2." . a rdf:Property; ; rdfs:label "ka"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator gain (KA) (> 0). This is parameter K in the IEEE standard. Typical value = 200." . a rdf:Property; ; rdfs:label "ta"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator time constant (TA) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "tb"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator time constant (TB) (>= 0). Typical value = 10." . a rdf:Property; ; rdfs:label "tc"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator time constant (TC) (>= 0). Typical value = 1." . a rdf:Property; ; rdfs:label "vrmax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum voltage regulator output (VRMAX) (> 0). Typical value = 10." . a rdf:Property; ; rdfs:label "vrmin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum voltage regulator output (VRMIN) (< 0). Typical value = -10." . a rdf:Property; ; rdfs:label "km"@en; rdfs:domain ; ; ; rdfs:comment "Forward gain constant of the inner loop field regulator (KM) (> 0). Typical value = 7,93." . a rdf:Property; ; rdfs:label "tm"@en; rdfs:domain ; ; ; rdfs:comment "Forward time constant of inner loop field regulator (TM) (> 0). Typical value = 0,4." . a rdf:Property; ; rdfs:label "vmmax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum inner loop output (VMMax) (> 0). Typical value = 1." . a rdf:Property; ; rdfs:label "vmmin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum inner loop output (VMMin) (<= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "kg"@en; rdfs:domain ; ; ; rdfs:comment "Feedback gain constant of the inner loop field regulator (KG) (>= 0). Typical value = 1." . a rdf:Property; ; rdfs:label "kp"@en; rdfs:domain ; ; ; rdfs:comment "Potential circuit gain coefficient (KP) (> 0). Typical value = 6,15." . a rdf:Property; ; rdfs:label "thetap"@en; rdfs:domain ; ; ; rdfs:comment "Potential circuit phase angle (thetap). Typical value = 0." . a rdf:Property; ; rdfs:label "ki"@en; rdfs:domain ; ; ; rdfs:comment "Potential circuit gain coefficient (KI) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "kc"@en; rdfs:domain ; ; ; rdfs:comment "Rectifier loading factor proportional to commutating reactance (KC) (>= 0). Typical value = 0,2." . a rdf:Property; ; rdfs:label "xl"@en; rdfs:domain ; ; ; rdfs:comment "Reactance associated with potential source (XL) (>= 0). Typical value = 0,081." . a rdf:Property; ; rdfs:label "vbmax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum excitation voltage (VBMax) (> 0). Typical value = 6,9." . a rdf:Property; ; rdfs:label "vgmax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum inner loop feedback voltage (VGMax) (>= 0). Typical value = 5,8." . a rdfs:Class; rdfs:label "ExcIEEEST4B"@en; rdfs:subClassOf ; rdfs:comment """IEEE 421.5-2005 type ST4B model. This model is a variation of the type ST3A model, with a proportional plus integral (PI) regulator block replacing the lag-lead regulator characteristic that is in the ST3A model. Both potential and compound source rectifier excitation systems are modelled. The PI regulator blocks have non-windup limits that are represented. The voltage regulator of this model is typically implemented digitally. Reference: IEEE 421.5-2005, 7.4. """; ; . a rdf:Property; ; rdfs:label "kpr"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator proportional gain (KPR). Typical value = 10,75." . a rdf:Property; ; rdfs:label "kir"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator integral gain (KIR). Typical value = 10,75." . a rdf:Property; ; rdfs:label "ta"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator time constant (TA) (>= 0). Typical value = 0,02." . a rdf:Property; ; rdfs:label "vrmax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum voltage regulator output (VRMAX) (> 0). Typical value = 1." . a rdf:Property; ; rdfs:label "vrmin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum voltage regulator output (VRMIN) (< 0). Typical value = -0,87." . a rdf:Property; ; rdfs:label "kpm"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator proportional gain output (KPM). Typical value = 1." . a rdf:Property; ; rdfs:label "kim"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator integral gain output (KIM). Typical value = 0." . a rdf:Property; ; rdfs:label "vmmax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum inner loop output (VMMax) (> ExcIEEEST4B.vmmin). Typical value = 99." . a rdf:Property; ; rdfs:label "vmmin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum inner loop output (VMMin) (< ExcIEEEST4B.vmmax). Typical value = -99." . a rdf:Property; ; rdfs:label "kg"@en; rdfs:domain ; ; ; rdfs:comment "Feedback gain constant of the inner loop field regulator (KG) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "kp"@en; rdfs:domain ; ; ; rdfs:comment "Potential circuit gain coefficient (KP) (> 0). Typical value = 9,3." . a rdf:Property; ; rdfs:label "thetap"@en; rdfs:domain ; ; ; rdfs:comment "Potential circuit phase angle (thetap). Typical value = 0." . a rdf:Property; ; rdfs:label "ki"@en; rdfs:domain ; ; ; rdfs:comment "Potential circuit gain coefficient (KI) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "kc"@en; rdfs:domain ; ; ; rdfs:comment "Rectifier loading factor proportional to commutating reactance (KC) (>= 0). Typical value = 0,113." . a rdf:Property; ; rdfs:label "xl"@en; rdfs:domain ; ; ; rdfs:comment "Reactance associated with potential source (XL) (>= 0). Typical value = 0,124." . a rdf:Property; ; rdfs:label "vbmax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum excitation voltage (VBMax) (> 0). Typical value = 11,63." . a rdfs:Class; rdfs:label "ExcIEEEST5B"@en; rdfs:subClassOf ; rdfs:comment """IEEE 421.5-2005 type ST5B model. The type ST5B excitation system is a variation of the type ST1A model, with alternative overexcitation and underexcitation inputs and additional limits. The block diagram in the IEEE 421.5 standard has input signal Vc and does not indicate the summation point with Vref. The implementation of the ExcIEEEST5B shall consider summation point with Vref. Reference: IEEE 421.5-2005, 7.5. """; ; . a rdf:Property; ; rdfs:label "kr"@en; rdfs:domain ; ; ; rdfs:comment "Regulator gain (KR) (> 0). Typical value = 200." . a rdf:Property; ; rdfs:label "t1"@en; rdfs:domain ; ; ; rdfs:comment "Firing circuit time constant (T1) (>= 0). Typical value = 0,004." . a rdf:Property; ; rdfs:label "kc"@en; rdfs:domain ; ; ; rdfs:comment "Rectifier regulation factor (KC) (>= 0). Typical value = 0,004." . a rdf:Property; ; rdfs:label "vrmax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum voltage regulator output (VRMAX) (> 0). Typical value = 5." . a rdf:Property; ; rdfs:label "vrmin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum voltage regulator output (VRMIN) (< 0). Typical value = -4." . a rdf:Property; ; rdfs:label "tc1"@en; rdfs:domain ; ; ; rdfs:comment "Regulator lead time constant (TC1) (>= 0). Typical value = 0,8." . a rdf:Property; ; rdfs:label "tb1"@en; rdfs:domain ; ; ; rdfs:comment "Regulator lag time constant (TB1) (>= 0). Typical value = 6." . a rdf:Property; ; rdfs:label "tc2"@en; rdfs:domain ; ; ; rdfs:comment "Regulator lead time constant (TC2) (>= 0). Typical value = 0,08." . a rdf:Property; ; rdfs:label "tb2"@en; rdfs:domain ; ; ; rdfs:comment "Regulator lag time constant (TB2) (>= 0). Typical value = 0,01." . a rdf:Property; ; rdfs:label "toc1"@en; rdfs:domain ; ; ; rdfs:comment "OEL lead time constant (TOC1) (>= 0). Typical value = 0,1." . a rdf:Property; ; rdfs:label "tob1"@en; rdfs:domain ; ; ; rdfs:comment "OEL lag time constant (TOB1) (>= 0). Typical value = 2." . a rdf:Property; ; rdfs:label "toc2"@en; rdfs:domain ; ; ; rdfs:comment "OEL lead time constant (TOC2) (>= 0). Typical value = 0,08." . a rdf:Property; ; rdfs:label "tob2"@en; rdfs:domain ; ; ; rdfs:comment "OEL lag time constant (TOB2) (>= 0). Typical value = 0,08." . a rdf:Property; ; rdfs:label "tuc1"@en; rdfs:domain ; ; ; rdfs:comment "UEL lead time constant (TUC1) (>= 0). Typical value = 2." . a rdf:Property; ; rdfs:label "tub1"@en; rdfs:domain ; ; ; rdfs:comment "UEL lag time constant (TUB1) (>= 0). Typical value = 10." . a rdf:Property; ; rdfs:label "tuc2"@en; rdfs:domain ; ; ; rdfs:comment "UEL lead time constant (TUC2) (>= 0). Typical value = 0,1." . a rdf:Property; ; rdfs:label "tub2"@en; rdfs:domain ; ; ; rdfs:comment "UEL lag time constant (TUB2) (>= 0). Typical value = 0,05." . a rdfs:Class; rdfs:label "ExcIEEEST6B"@en; rdfs:subClassOf ; rdfs:comment """IEEE 421.5-2005 type ST6B model. This model consists of a PI voltage regulator with an inner loop field voltage regulator and pre-control. The field voltage regulator implements a proportional control. The pre-control and the delay in the feedback circuit increase the dynamic response. Reference: IEEE 421.5-2005, 7.6. """; ; . a rdf:Property; ; rdfs:label "ilr"@en; rdfs:domain ; ; ; rdfs:comment "Exciter output current limit reference (ILR) (> 0). Typical value = 4,164." . a rdf:Property; ; rdfs:label "kci"@en; rdfs:domain ; ; ; rdfs:comment "Exciter output current limit adjustment (KCI) (> 0). Typical value = 1,0577." . a rdf:Property; ; rdfs:label "kff"@en; rdfs:domain ; ; ; rdfs:comment "Pre-control gain constant of the inner loop field regulator (KFF). Typical value = 1." . a rdf:Property; ; rdfs:label "kg"@en; rdfs:domain ; ; ; rdfs:comment "Feedback gain constant of the inner loop field regulator (KG) (>= 0). Typical value = 1." . a rdf:Property; ; rdfs:label "kia"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator integral gain (KIA) (> 0). Typical value = 45,094." . a rdf:Property; ; rdfs:label "klr"@en; rdfs:domain ; ; ; rdfs:comment "Exciter output current limiter gain (KLR) (> 0). Typical value = 17,33." . a rdf:Property; ; rdfs:label "km"@en; rdfs:domain ; ; ; rdfs:comment "Forward gain constant of the inner loop field regulator (KM). Typical value = 1." . a rdf:Property; ; rdfs:label "kpa"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator proportional gain (KPA) (> 0). Typical value = 18,038." . ; rdfs:label "oelin"@en; a rdf:Property; rdfs:domain ; rdfs:range ; ; rdfs:comment "OEL input selector (OELin). Typical value = noOELinput." . a rdf:Property; ; rdfs:label "tg"@en; rdfs:domain ; ; ; rdfs:comment "Feedback time constant of inner loop field voltage regulator (TG) (>= 0). Typical value = 0,02." . a rdf:Property; ; rdfs:label "vamax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum voltage regulator output (VAMAX) (> 0). Typical value = 4,81." . a rdf:Property; ; rdfs:label "vamin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum voltage regulator output (VAMIN) (< 0). Typical value = -3,85." . a rdf:Property; ; rdfs:label "vrmax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum voltage regulator output (VRMAX) (> 0). Typical value = 4,81." . a rdf:Property; ; rdfs:label "vrmin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum voltage regulator output (VRMIN) (< 0). Typical value = -3,85." . a rdfs:Class; rdfs:label "ExcIEEEST7B"@en; rdfs:subClassOf ; rdfs:comment """IEEE 421.5-2005 type ST7B model. This model is representative of static potential-source excitation systems. In this system, the AVR consists of a PI voltage regulator. A phase lead-lag filter in series allows the introduction of a derivative function, typically used with brushless excitation systems. In that case, the regulator is of the PID type. In addition, the terminal voltage channel includes a phase lead-lag filter. The AVR includes the appropriate inputs on its reference for overexcitation limiter (OEL1), underexcitation limiter (UEL), stator current limiter (SCL), and current compensator (DROOP). All these limitations, when they work at voltage reference level, keep the PSS (VS signal from PSS) in operation. However, the UEL limitation can also be transferred to the high value (HV) gate acting on the output signal. In addition, the output signal passes through a low value (LV) gate for a ceiling overexcitation limiter (OEL2). Reference: IEEE 421.5-2005, 7.7. """; ; . a rdf:Property; ; rdfs:label "kh"@en; rdfs:domain ; ; ; rdfs:comment "High-value gate feedback gain (KH) (>= 0). Typical value = 1." . a rdf:Property; ; rdfs:label "kia"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator integral gain (KIA) (>= 0). Typical value = 1." . a rdf:Property; ; rdfs:label "kl"@en; rdfs:domain ; ; ; rdfs:comment "Low-value gate feedback gain (KL) (>= 0). Typical value = 1." . a rdf:Property; ; rdfs:label "kpa"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator proportional gain (KPA) (> 0). Typical value = 40." . a rdf:Property; ; rdfs:label "oelin"@en; rdfs:domain ; rdfs:range ; ; rdfs:comment "OEL input selector (OELin). Typical value = noOELinput." . a rdf:Property; ; rdfs:label "tb"@en; rdfs:domain ; ; ; rdfs:comment "Regulator lag time constant (TB) (>= 0). Typical value = 1." . a rdf:Property; ; rdfs:label "tc"@en; rdfs:domain ; ; ; rdfs:comment "Regulator lead time constant (TC) (>= 0). Typical value = 1." . a rdf:Property; ; rdfs:label "tf"@en; rdfs:domain ; ; ; rdfs:comment "Excitation control system stabilizer time constant (TF) (>= 0). Typical value = 1." . a rdf:Property; ; rdfs:label "tg"@en; rdfs:domain ; ; ; rdfs:comment "Feedback time constant of inner loop field voltage regulator (TG) (>= 0). Typical value = 1." . a rdf:Property; ; rdfs:label "tia"@en; rdfs:domain ; ; ; rdfs:comment "Feedback time constant (TIA) (>= 0). Typical value = 3." . a rdf:Property; ; rdfs:label "uelin"@en; rdfs:domain ; rdfs:range ; ; rdfs:comment "UEL input selector (UELin). Typical value = noUELinput." . a rdf:Property; ; rdfs:label "vmax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum voltage reference signal (VMAX) (> 0 and > ExcIEEEST7B.vmin). Typical value = 1,1." . a rdf:Property; ; rdfs:label "vmin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum voltage reference signal (VMIN) (> 0 and < ExcIEEEST7B.vmax). Typical value = 0,9." . a rdf:Property; ; rdfs:label "vrmax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum voltage regulator output (VRMAX) (> 0). Typical value = 5." . a rdf:Property; ; rdfs:label "vrmin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum voltage regulator output (VRMIN) (< 0). Typical value = -4,5." . a rdfs:Class; rdfs:label "ExcAC1A"@en; rdfs:subClassOf ; rdfs:comment "Modified IEEE AC1A alternator-supplied rectifier excitation system with different rate feedback source."; ; . a rdf:Property; ; rdfs:label "tb"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator time constant (Tb) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "tc"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator time constant (Tc) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "ka"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator gain (Ka) (> 0). Typical value = 400." . a rdf:Property; ; rdfs:label "ta"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator time constant (Ta) (> 0). Typical value = 0,02." . a rdf:Property; ; rdfs:label "vamax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum voltage regulator output (Vamax) (> 0). Typical value = 14,5." . a rdf:Property; ; rdfs:label "vamin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum voltage regulator output (Vamin) (< 0). Typical value = -14,5." . a rdf:Property; ; rdfs:label "te"@en; rdfs:domain ; ; ; rdfs:comment "Exciter time constant, integration rate associated with exciter control (Te) (> 0). Typical value = 0,8." . a rdf:Property; ; rdfs:label "kf"@en; rdfs:domain ; ; ; rdfs:comment "Excitation control system stabilizer gains (Kf) (>= 0). Typical value = 0,03." . a rdf:Property; ; rdfs:label "kf1"@en; rdfs:domain ; ; ; rdfs:comment "Coefficient to allow different usage of the model (Kf1) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "kf2"@en; rdfs:domain ; ; ; rdfs:comment "Coefficient to allow different usage of the model (Kf2) (>= 0). Typical value = 1." . a rdf:Property; ; rdfs:label "ks"@en; rdfs:domain ; ; ; rdfs:comment "Coefficient to allow different usage of the model-speed coefficient (Ks) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "tf"@en; rdfs:domain ; ; ; rdfs:comment "Excitation control system stabilizer time constant (Tf) (> 0). Typical value = 1." . a rdf:Property; ; rdfs:label "kc"@en; rdfs:domain ; ; ; rdfs:comment "Rectifier loading factor proportional to commutating reactance (Kc) (>= 0). Typical value = 0,2." . a rdf:Property; ; rdfs:label "kd"@en; rdfs:domain ; ; ; rdfs:comment "Demagnetizing factor, a function of exciter alternator reactances (Kd) (>= 0). Typical value = 0,38." . a rdf:Property; ; rdfs:label "ke"@en; rdfs:domain ; ; ; rdfs:comment "Exciter constant related to self-excited field (Ke). Typical value = 1." . a rdf:Property; ; rdfs:label "ve1"@en; rdfs:domain ; ; ; rdfs:comment "Exciter alternator output voltages back of commutating reactance at which saturation is defined (Ve1) (> 0). Typical value = 4,18." . a rdf:Property; ; rdfs:label "seve1"@en; rdfs:domain ; ; ; rdfs:comment "Exciter saturation function value at the corresponding exciter voltage, Ve1, back of commutating reactance (Se[Ve1]) (>= 0). Typical value = 0,1." . a rdf:Property; ; rdfs:label "ve2"@en; rdfs:domain ; ; ; rdfs:comment "Exciter alternator output voltages back of commutating reactance at which saturation is defined (Ve2) (> 0). Typical value = 3,14." . a rdf:Property; ; rdfs:label "seve2"@en; rdfs:domain ; ; ; rdfs:comment "Exciter saturation function value at the corresponding exciter voltage, Ve2, back of commutating reactance (Se[Ve2]) (>= 0). Typical value = 0,03." . a rdf:Property; ; rdfs:label "vrmax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum voltage regulator outputs (Vrmax) (> 0). Typical value = 6,03." . a rdf:Property; ; rdfs:label "vrmin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum voltage regulator outputs (Vrmin) (< 0). Typical value = -5,43." . a rdf:Property; ; rdfs:label "hvlvgates"@en; rdfs:domain ; ; ; rdfs:comment """Indicates if both HV gate and LV gate are active (HVLVgates). true = gates are used false = gates are not used. Typical value = true.""" . a rdfs:Class; rdfs:label "ExcAC2A"@en; rdfs:subClassOf ; rdfs:comment "Modified IEEE AC2A alternator-supplied rectifier excitation system with different field current limit."; ; . a rdf:Property; ; rdfs:label "tb"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator time constant (Tb) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "tc"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator time constant (Tc) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "ka"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator gain (Ka) (> 0). Typical value = 400." . a rdf:Property; ; rdfs:label "ta"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator time constant (Ta) (> 0). Typical value = 0,02." . a rdf:Property; ; rdfs:label "vamax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum voltage regulator output (Vamax) (> 0). Typical value = 8." . a rdf:Property; ; rdfs:label "vamin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum voltage regulator output (Vamin) (< 0). Typical value = -8." . a rdf:Property; ; rdfs:label "kb"@en; rdfs:domain ; ; ; rdfs:comment "Second stage regulator gain (Kb) (> 0). Exciter field current controller gain. Typical value = 25." . a rdf:Property; ; rdfs:label "kb1"@en; rdfs:domain ; ; ; rdfs:comment "Second stage regulator gain (Kb1). It is exciter field current controller gain used as alternative to Kb to represent a variant of the ExcAC2A model. Typical value = 25." . a rdf:Property; ; rdfs:label "vrmax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum voltage regulator outputs (Vrmax) (> 0). Typical value = 105." . a rdf:Property; ; rdfs:label "vrmin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum voltage regulator outputs (Vrmin) (< 0). Typical value = -95." . a rdf:Property; ; rdfs:label "te"@en; rdfs:domain ; ; ; rdfs:comment "Exciter time constant, integration rate associated with exciter control (Te) (> 0). Typical value = 0,6." . a rdf:Property; ; rdfs:label "vfemax"@en; rdfs:domain ; ; ; rdfs:comment "Exciter field current limit reference (Vfemax) (>= 0). Typical value = 4,4." . a rdf:Property; ; rdfs:label "kh"@en; rdfs:domain ; ; ; rdfs:comment "Exciter field current feedback gain (Kh) (>= 0). Typical value = 1." . a rdf:Property; ; rdfs:label "kf"@en; rdfs:domain ; ; ; rdfs:comment "Excitation control system stabilizer gains (Kf) (>= 0). Typical value = 0,03." . a rdf:Property; ; rdfs:label "kl"@en; rdfs:domain ; ; ; rdfs:comment "Exciter field current limiter gain (Kl). Typical value = 10." . a rdf:Property; ; rdfs:label "vlr"@en; rdfs:domain ; ; ; rdfs:comment "Maximum exciter field current (Vlr) (> 0). Typical value = 4,4." . a rdf:Property; ; rdfs:label "kl1"@en; rdfs:domain ; ; ; rdfs:comment "Coefficient to allow different usage of the model (Kl1). Typical value = 1." . a rdf:Property; ; rdfs:label "ks"@en; rdfs:domain ; ; ; rdfs:comment "Coefficient to allow different usage of the model-speed coefficient (Ks) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "tf"@en; rdfs:domain ; ; ; rdfs:comment "Excitation control system stabilizer time constant (Tf) (> 0). Typical value = 1." . a rdf:Property; ; rdfs:label "kc"@en; rdfs:domain ; ; ; rdfs:comment "Rectifier loading factor proportional to commutating reactance (Kc) (>= 0). Typical value = 0,28." . a rdf:Property; ; rdfs:label "kd"@en; rdfs:domain ; ; ; rdfs:comment "Demagnetizing factor, a function of exciter alternator reactances (Kd) (>= 0). Typical value = 0,35." . a rdf:Property; ; rdfs:label "ke"@en; rdfs:domain ; ; ; rdfs:comment "Exciter constant related to self-excited field (Ke). Typical value = 1." . a rdf:Property; ; rdfs:label "ve1"@en; rdfs:domain ; ; ; rdfs:comment "Exciter alternator output voltages back of commutating reactance at which saturation is defined (Ve1) (> 0). Typical value = 4,4." . a rdf:Property; ; rdfs:label "seve1"@en; rdfs:domain ; ; ; rdfs:comment "Exciter saturation function value at the corresponding exciter voltage, Ve1, back of commutating reactance (Se[Ve1]) (>= 0). Typical value = 0,037." . a rdf:Property; ; rdfs:label "ve2"@en; rdfs:domain ; ; ; rdfs:comment "Exciter alternator output voltages back of commutating reactance at which saturation is defined (Ve2) (> 0). Typical value = 3,3." . a rdf:Property; ; rdfs:label "seve2"@en; rdfs:domain ; ; ; rdfs:comment "Exciter saturation function value at the corresponding exciter voltage, Ve2, back of commutating reactance (Se[Ve2]) (>= 0). Typical value = 0,012." . a rdf:Property; ; rdfs:label "hvgate"@en; rdfs:domain ; ; ; rdfs:comment """Indicates if HV gate is active (HVgate). true = gate is used false = gate is not used. Typical value = true.""" . a rdf:Property; ; rdfs:label "lvgate"@en; rdfs:domain ; ; ; rdfs:comment """Indicates if LV gate is active (LVgate). true = gate is used false = gate is not used. Typical value = true.""" . a rdfs:Class; rdfs:label "ExcAC3A"@en; rdfs:subClassOf ; rdfs:comment "Modified IEEE AC3A alternator-supplied rectifier excitation system with different field current limit."; ; . a rdf:Property; ; rdfs:label "tb"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator time constant (Tb) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "tc"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator time constant (Tc) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "ka"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator gain (Ka) (> 0). Typical value = 45,62." . a rdf:Property; ; rdfs:label "ta"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator time constant (Ta) (> 0). Typical value = 0,013." . a rdf:Property; ; rdfs:label "vamax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum voltage regulator output (Vamax) (> 0). Typical value = 1." . a rdf:Property; ; rdfs:label "vamin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum voltage regulator output (Vamin) (< 0). Typical value = -0,95." . a rdf:Property; ; rdfs:label "te"@en; rdfs:domain ; ; ; rdfs:comment "Exciter time constant, integration rate associated with exciter control (Te) (> 0). Typical value = 1,17." . a rdf:Property; ; rdfs:label "vemin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum exciter voltage output (Vemin) (<= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "kr"@en; rdfs:domain ; ; ; rdfs:comment "Constant associated with regulator and alternator field power supply (Kr) (> 0). Typical value =3,77." . a rdf:Property; ; rdfs:label "kf"@en; rdfs:domain ; ; ; rdfs:comment "Excitation control system stabilizer gains (Kf) (>= 0). Typical value = 0,143." . a rdf:Property; ; rdfs:label "tf"@en; rdfs:domain ; ; ; rdfs:comment "Excitation control system stabilizer time constant (Tf) (> 0). Typical value = 1." . a rdf:Property; ; rdfs:label "kn"@en; rdfs:domain ; ; ; rdfs:comment "Excitation control system stabilizer gain (Kn) (>= 0). Typical value =0,05." . a rdf:Property; ; rdfs:label "efdn"@en; rdfs:domain ; ; ; rdfs:comment "Value of Efd at which feedback gain changes (Efdn) (> 0). Typical value = 2,36." . a rdf:Property; ; rdfs:label "kc"@en; rdfs:domain ; ; ; rdfs:comment "Rectifier loading factor proportional to commutating reactance (Kc) (>= 0). Typical value = 0,104." . a rdf:Property; ; rdfs:label "kd"@en; rdfs:domain ; ; ; rdfs:comment "Demagnetizing factor, a function of exciter alternator reactances (Kd) (>= 0). Typical value = 0,499." . a rdf:Property; ; rdfs:label "ke"@en; rdfs:domain ; ; ; rdfs:comment "Exciter constant related to self-excited field (Ke). Typical value = 1." . a rdf:Property; ; rdfs:label "klv"@en; rdfs:domain ; ; ; rdfs:comment "Gain used in the minimum field voltage limiter loop (Klv). Typical value = 0,194." . a rdf:Property; ; rdfs:label "kf1"@en; rdfs:domain ; ; ; rdfs:comment "Coefficient to allow different usage of the model (Kf1). Typical value = 1." . a rdf:Property; ; rdfs:label "kf2"@en; rdfs:domain ; ; ; rdfs:comment "Coefficient to allow different usage of the model (Kf2). Typical value = 0." . a rdf:Property; ; rdfs:label "ks"@en; rdfs:domain ; ; ; rdfs:comment "Coefficient to allow different usage of the model-speed coefficient (Ks). Typical value = 0." . a rdf:Property; ; rdfs:label "vfemax"@en; rdfs:domain ; ; ; rdfs:comment "Exciter field current limit reference (Vfemax) (>= 0). Typical value = 16." . a rdf:Property; ; rdfs:label "ve1"@en; rdfs:domain ; ; ; rdfs:comment "Exciter alternator output voltages back of commutating reactance at which saturation is defined (Ve1) (> 0). Typical value = 6.24." . a rdf:Property; ; rdfs:label "seve1"@en; rdfs:domain ; ; ; rdfs:comment "Exciter saturation function value at the corresponding exciter voltage, Ve1, back of commutating reactance (Se[Ve1]) (>= 0). Typical value = 1,143." . a rdf:Property; ; rdfs:label "ve2"@en; rdfs:domain ; ; ; rdfs:comment "Exciter alternator output voltages back of commutating reactance at which saturation is defined (Ve2) (> 0). Typical value = 4,68." . a rdf:Property; ; rdfs:label "seve2"@en; rdfs:domain ; ; ; rdfs:comment "Exciter saturation function value at the corresponding exciter voltage, Ve2, back of commutating reactance (Se[Ve2]) (>= 0). Typical value = 0,1." . a rdf:Property; ; rdfs:label "vlv"@en; rdfs:domain ; ; ; rdfs:comment "Field voltage used in the minimum field voltage limiter loop (Vlv). Typical value = 0,79." . a rdfs:Class; rdfs:label "ExcAC4A"@en; rdfs:subClassOf ; rdfs:comment "Modified IEEE AC4A alternator-supplied rectifier excitation system with different minimum controller output."; ; . a rdf:Property; ; rdfs:label "vimax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum voltage regulator input limit (Vimax) (> 0). Typical value = 10." . a rdf:Property; ; rdfs:label "vimin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum voltage regulator input limit (Vimin) (< 0). Typical value = -10." . a rdf:Property; ; rdfs:label "tc"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator time constant (Tc) (>= 0). Typical value = 1." . a rdf:Property; ; rdfs:label "tb"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator time constant (Tb) (>= 0). Typical value = 10." . a rdf:Property; ; rdfs:label "ka"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator gain (Ka) (> 0). Typical value = 200." . a rdf:Property; ; rdfs:label "ta"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator time constant (Ta) (> 0). Typical value = 0,015." . a rdf:Property; ; rdfs:label "vrmax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum voltage regulator output (Vrmax) (> 0). Typical value = 5,64." . a rdf:Property; ; rdfs:label "vrmin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum voltage regulator output (Vrmin) (< 0). Typical value = -4,53." . a rdf:Property; ; rdfs:label "kc"@en; rdfs:domain ; ; ; rdfs:comment "Rectifier loading factor proportional to commutating reactance (Kc) (>= 0). Typical value = 0." . a rdfs:Class; rdfs:label "ExcAC5A"@en; rdfs:subClassOf ; rdfs:comment "Modified IEEE AC5A alternator-supplied rectifier excitation system with different minimum controller output."; ; . a rdf:Property; ; rdfs:label "ka"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator gain (Ka) (> 0). Typical value = 400." . a rdf:Property; ; rdfs:label "ks"@en; rdfs:domain ; ; ; rdfs:comment "Coefficient to allow different usage of the model-speed coefficient (Ks). Typical value = 0." . a rdf:Property; ; rdfs:label "tb"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator time constant (Tb) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "tc"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator time constant (Tc) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "ta"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator time constant (Ta) (> 0). Typical value = 0,02." . a rdf:Property; ; rdfs:label "vrmax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum voltage regulator output (Vrmax) (> 0). Typical value = 7,3." . a rdf:Property; ; rdfs:label "vrmin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum voltage regulator output (Vrmin) (< 0). Typical value =-7,3." . a rdf:Property; ; rdfs:label "ke"@en; rdfs:domain ; ; ; rdfs:comment "Exciter constant related to self-excited field (Ke). Typical value = 1." . a rdf:Property; ; rdfs:label "te"@en; rdfs:domain ; ; ; rdfs:comment "Exciter time constant, integration rate associated with exciter control (Te) (> 0). Typical value = 0,8." . a rdf:Property; ; rdfs:label "kf"@en; rdfs:domain ; ; ; rdfs:comment "Excitation control system stabilizer gains (Kf) (>= 0). Typical value = 0,03." . a rdf:Property; ; rdfs:label "tf1"@en; rdfs:domain ; ; ; rdfs:comment "Excitation control system stabilizer time constant (Tf1) (> 0). Typical value = 1." . a rdf:Property; ; rdfs:label "tf2"@en; rdfs:domain ; ; ; rdfs:comment "Excitation control system stabilizer time constant (Tf2) (>= 0). Typical value = 0,8." . a rdf:Property; ; rdfs:label "tf3"@en; rdfs:domain ; ; ; rdfs:comment "Excitation control system stabilizer time constant (Tf3) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "efd1"@en; rdfs:domain ; ; ; rdfs:comment "Exciter voltage at which exciter saturation is defined (Efd1) (> 0). Typical value = 5,6." . a rdf:Property; ; rdfs:label "seefd1"@en; rdfs:domain ; ; ; rdfs:comment "Exciter saturation function value at the corresponding exciter voltage, Efd1 (Se[Efd1]) (>= 0). Typical value = 0,86." . a rdf:Property; ; rdfs:label "efd2"@en; rdfs:domain ; ; ; rdfs:comment "Exciter voltage at which exciter saturation is defined (Efd2) (> 0). Typical value = 4,2." . a rdf:Property; ; rdfs:label "seefd2"@en; rdfs:domain ; ; ; rdfs:comment "Exciter saturation function value at the corresponding exciter voltage, Efd2 (Se[Efd2]) (>= 0). Typical value = 0,5." . a rdf:Property; ; rdfs:label "a"@en; rdfs:domain ; ; ; rdfs:comment "Coefficient to allow different usage of the model (a). Typical value = 1." . a rdfs:Class; rdfs:label "ExcAC6A"@en; rdfs:subClassOf ; rdfs:comment "Modified IEEE AC6A alternator-supplied rectifier excitation system with speed input."; ; . a rdf:Property; ; rdfs:label "ka"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator gain (Ka) (> 0). Typical value = 536." . a rdf:Property; ; rdfs:label "ks"@en; rdfs:domain ; ; ; rdfs:comment "Coefficient to allow different usage of the model-speed coefficient (Ks). Typical value = 0." . a rdf:Property; ; rdfs:label "ta"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator time constant (Ta) (>= 0). Typical value = 0,086." . a rdf:Property; ; rdfs:label "tk"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator time constant (Tk) (>= 0). Typical value = 0,18." . a rdf:Property; ; rdfs:label "tb"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator time constant (Tb) (>= 0). Typical value = 9." . a rdf:Property; ; rdfs:label "tc"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator time constant (Tc) (>= 0). Typical value = 3." . a rdf:Property; ; rdfs:label "vamax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum voltage regulator output (Vamax) (> 0). Typical value = 75." . a rdf:Property; ; rdfs:label "vamin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum voltage regulator output (Vamin) (< 0). Typical value = -75." . a rdf:Property; ; rdfs:label "vrmax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum voltage regulator output (Vrmax) (> 0). Typical value = 44." . a rdf:Property; ; rdfs:label "vrmin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum voltage regulator output (Vrmin) (< 0). Typical value = -36." . a rdf:Property; ; rdfs:label "te"@en; rdfs:domain ; ; ; rdfs:comment "Exciter time constant, integration rate associated with exciter control (Te) (> 0). Typical value = 1." . a rdf:Property; ; rdfs:label "kh"@en; rdfs:domain ; ; ; rdfs:comment "Exciter field current limiter gain (Kh) (>= 0). Typical value = 92." . a rdf:Property; ; rdfs:label "tj"@en; rdfs:domain ; ; ; rdfs:comment "Exciter field current limiter time constant (Tj) (>= 0). Typical value = 0,02." . ; a rdf:Property; rdfs:label "th"@en; rdfs:domain ; ; ; rdfs:comment "Exciter field current limiter time constant (Th) (> 0). Typical value = 0,08." . a rdf:Property; ; rdfs:label "vfelim"@en; rdfs:domain ; ; ; rdfs:comment "Exciter field current limit reference (Vfelim) (> 0). Typical value = 19." . a rdf:Property; ; rdfs:label "vhmax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum field current limiter signal reference (Vhmax) (> 0). Typical value = 75." . a rdf:Property; ; rdfs:label "kc"@en; rdfs:domain ; ; ; rdfs:comment "Rectifier loading factor proportional to commutating reactance (Kc) (>= 0). Typical value = 0,173." . a rdf:Property; ; rdfs:label "kd"@en; rdfs:domain ; ; ; rdfs:comment "Demagnetizing factor, a function of exciter alternator reactances (Kd) (>= 0). Typical value = 1,91." . a rdf:Property; ; rdfs:label "ke"@en; rdfs:domain ; ; ; rdfs:comment "Exciter constant related to self-excited field (Ke). Typical value = 1,6." . a rdf:Property; ; rdfs:label "ve1"@en; rdfs:domain ; ; ; rdfs:comment "Exciter alternator output voltages back of commutating reactance at which saturation is defined (Ve1) (> 0). Typical value = 7,4." . a rdf:Property; ; rdfs:label "seve1"@en; rdfs:domain ; ; ; rdfs:comment "Exciter saturation function value at the corresponding exciter voltage, Ve1, back of commutating reactance (Se[Ve1]) (>= 0). Typical value = 0,214." . a rdf:Property; ; rdfs:label "ve2"@en; rdfs:domain ; ; ; rdfs:comment "Exciter alternator output voltages back of commutating reactance at which saturation is defined (Ve2) (> 0). Typical value = 5,55." . a rdf:Property; ; rdfs:label "seve2"@en; rdfs:domain ; ; ; rdfs:comment "Exciter saturation function value at the corresponding exciter voltage, Ve2, back of commutating reactance (Se[Ve2]) (>= 0). Typical value = 0,044." . a rdfs:Class; rdfs:label "ExcAC8B"@en; rdfs:subClassOf ; rdfs:comment "Modified IEEE AC8B alternator-supplied rectifier excitation system with speed input and input limiter."; ; . a rdf:Property; ; rdfs:label "inlim"@en; rdfs:domain ; ; ; rdfs:comment """Input limiter indicator. true = input limiter Vimax and Vimin is considered false = input limiter Vimax and Vimin is not considered. Typical value = true.""" . a rdf:Property; ; rdfs:label "ka"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator gain (Ka) (> 0). Typical value = 1." . a rdf:Property; ; rdfs:label "kc"@en; rdfs:domain ; ; ; rdfs:comment "Rectifier loading factor proportional to commutating reactance (Kc) (>= 0). Typical value = 0,55." . a rdf:Property; ; rdfs:label "kd"@en; rdfs:domain ; ; ; rdfs:comment "Demagnetizing factor, a function of exciter alternator reactances (Kd) (>= 0). Typical value = 1,1." . a rdf:Property; ; rdfs:label "kdr"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator derivative gain (Kdr) (>= 0). Typical value = 10." . a rdf:Property; ; rdfs:label "ke"@en; rdfs:domain ; ; ; rdfs:comment "Exciter constant related to self-excited field (Ke). Typical value = 1." . a rdf:Property; ; rdfs:label "kir"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator integral gain (Kir) (>= 0). Typical value = 5." . a rdf:Property; ; rdfs:label "kpr"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator proportional gain (Kpr) (> 0 if ExcAC8B.kir = 0). Typical value = 80." . a rdf:Property; ; rdfs:label "ks"@en; rdfs:domain ; ; ; rdfs:comment "Coefficient to allow different usage of the model-speed coefficient (Ks). Typical value = 0." . a rdf:Property; ; rdfs:label "pidlim"@en; rdfs:domain ; ; ; rdfs:comment """PID limiter indicator. true = input limiter Vpidmax and Vpidmin is considered false = input limiter Vpidmax and Vpidmin is not considered. Typical value = true.""" . a rdf:Property; ; rdfs:label "seve1"@en; rdfs:domain ; ; ; rdfs:comment "Exciter saturation function value at the corresponding exciter voltage, Ve1, back of commutating reactance (Se[Ve1]) (>= 0). Typical value = 0,3." . a rdf:Property; ; rdfs:label "seve2"@en; rdfs:domain ; ; ; rdfs:comment "Exciter saturation function value at the corresponding exciter voltage, Ve2, back of commutating reactance (Se[Ve2]) (>= 0). Typical value = 3." . a rdf:Property; ; rdfs:label "ta"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator time constant (Ta) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "tdr"@en; rdfs:domain ; ; ; rdfs:comment "Lag time constant (Tdr) (> 0 if ExcAC8B.kdr > 0). Typical value = 0,1." . a rdf:Property; ; rdfs:label "te"@en; rdfs:domain ; ; ; rdfs:comment "Exciter time constant, integration rate associated with exciter control (Te) (> 0). Typical value = 1,2." . a rdf:Property; ; rdfs:label "telim"@en; rdfs:domain ; ; ; rdfs:comment """Selector for the limiter on the block (1/sTe). See diagram for meaning of true and false. Typical value = false.""" . a rdf:Property; ; rdfs:label "ve1"@en; rdfs:domain ; ; ; rdfs:comment "Exciter alternator output voltages back of commutating reactance at which saturation is defined (Ve1) (> 0). Typical value = 6,5." . a rdf:Property; ; rdfs:label "ve2"@en; rdfs:domain ; ; ; rdfs:comment "Exciter alternator output voltages back of commutating reactance at which saturation is defined (Ve2) (> 0). Typical value = 9." . a rdf:Property; ; rdfs:label "vemin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum exciter voltage output (Vemin) (<= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "vfemax"@en; rdfs:domain ; ; ; rdfs:comment "Exciter field current limit reference (Vfemax). Typical value = 6." . a rdf:Property; ; rdfs:label "vimax"@en; rdfs:domain ; ; ; rdfs:comment "Input signal maximum (Vimax) (> ExcAC8B.vimin). Typical value = 35." . a rdf:Property; ; rdfs:label "vimin"@en; rdfs:domain ; ; ; rdfs:comment "Input signal minimum (Vimin) (< ExcAC8B.vimax). Typical value = -10." . a rdf:Property; ; rdfs:label "vpidmax"@en; rdfs:domain ; ; ; rdfs:comment "PID maximum controller output (Vpidmax) (> ExcAC8B.vpidmin). Typical value = 35." . a rdf:Property; ; rdfs:label "vpidmin"@en; rdfs:domain ; ; ; rdfs:comment "PID minimum controller output (Vpidmin) (< ExcAC8B.vpidmax). Typical value = -10." . a rdf:Property; ; rdfs:label "vrmax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum voltage regulator output (Vrmax) (> 0). Typical value = 35." . a rdf:Property; ; rdfs:label "vrmin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum voltage regulator output (Vrmin) (< 0). Typical value = 0." . a rdf:Property; ; rdfs:label "vtmult"@en; rdfs:domain ; ; ; rdfs:comment """Multiply by generator's terminal voltage indicator. true =the limits Vrmax and Vrmin are multiplied by the generator’s terminal voltage to represent a thyristor power stage fed from the generator terminals false = limits are not multiplied by generator's terminal voltage. Typical value = false.""" . a rdfs:Class; rdfs:label "ExcANS"@en; rdfs:subClassOf ; rdfs:comment "Italian excitation system. It represents static field voltage or excitation current feedback excitation system."; ; . a rdf:Property; ; rdfs:label "k3"@en; rdfs:domain ; ; ; rdfs:comment "AVR gain (K3). Typical value = 1000." . a rdf:Property; ; rdfs:label "k2"@en; rdfs:domain ; ; ; rdfs:comment "Exciter gain (K2). Typical value = 20." . a rdf:Property; ; rdfs:label "kce"@en; rdfs:domain ; ; ; rdfs:comment "Ceiling factor (KCE). Typical value = 1." . a rdf:Property; ; rdfs:label "t3"@en; rdfs:domain ; ; ; rdfs:comment "Time constant (T3) (>= 0). Typical value = 1,6." . a rdf:Property; ; rdfs:label "t2"@en; rdfs:domain ; ; ; rdfs:comment "Time constant (T2) (>= 0). Typical value = 0,05." . a rdf:Property; ; rdfs:label "t1"@en; rdfs:domain ; ; ; rdfs:comment "Time constant (T1) (>= 0). Typical value = 20." . a rdf:Property; ; rdfs:label "blint"@en; rdfs:domain ; ; ; rdfs:comment """Governor control flag (BLINT). 0 = lead-lag regulator 1 = proportional integral regulator. Typical value = 0.""" . a rdf:Property; ; rdfs:label "kvfif"@en; rdfs:domain ; ; ; rdfs:comment """Rate feedback signal flag (KVFIF). 0 = output voltage of the exciter 1 = exciter field current. Typical value = 0.""" . a rdf:Property; ; rdfs:label "ifmn"@en; rdfs:domain ; ; ; rdfs:comment "Minimum exciter current (IFMN). Typical value = -5,2." . a rdf:Property; ; rdfs:label "ifmx"@en; rdfs:domain ; ; ; rdfs:comment "Maximum exciter current (IFMX). Typical value = 6,5." . a rdf:Property; ; rdfs:label "vrmn"@en; rdfs:domain ; ; ; rdfs:comment "Minimum AVR output (VRMN). Typical value = -5,2." . a rdf:Property; ; rdfs:label "vrmx"@en; rdfs:domain ; ; ; rdfs:comment "Maximum AVR output (VRMX). Typical value = 6,5." . a rdf:Property; ; rdfs:label "krvecc"@en; rdfs:domain ; ; ; rdfs:comment """Feedback enabling (KRVECC). 0 = open loop control 1 = closed loop control. Typical value = 1.""" . a rdf:Property; ; rdfs:label "tb"@en; rdfs:domain ; ; ; rdfs:comment "Exciter time constant (TB) (>= 0). Typical value = 0,04." . a rdfs:Class; rdfs:label "ExcAVR1"@en; rdfs:subClassOf ; rdfs:comment "Italian excitation system corresponding to IEEE (1968) type 1 model. It represents an exciter dynamo and electromechanical regulator."; ; . a rdf:Property; ; rdfs:label "ka"@en; rdfs:domain ; ; ; rdfs:comment "AVR gain (KA). Typical value = 500." . a rdf:Property; ; rdfs:label "vrmn"@en; rdfs:domain ; ; ; rdfs:comment "Minimum AVR output (VRMN). Typical value = -6." . a rdf:Property; ; rdfs:label "vrmx"@en; rdfs:domain ; ; ; rdfs:comment "Maximum AVR output (VRMX). Typical value = 7." . a rdf:Property; ; rdfs:label "ta"@en; rdfs:domain ; ; ; rdfs:comment "AVR time constant (TA) (>= 0). Typical value = 0,2." . a rdf:Property; ; rdfs:label "tb"@en; rdfs:domain ; ; ; rdfs:comment "AVR time constant (TB) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "te"@en; rdfs:domain ; ; ; rdfs:comment "Exciter time constant (TE) (>= 0). Typical value = 1." . a rdf:Property; ; rdfs:label "e1"@en; rdfs:domain ; ; ; rdfs:comment "Field voltage value 1 (E1). Typical value = 4.18." . a rdf:Property; ; rdfs:label "se1"@en; rdfs:domain ; ; ; rdfs:comment "Saturation factor at E1 (S[E1]). Typical value = 0,1." . a rdf:Property; ; rdfs:label "e2"@en; rdfs:domain ; ; ; rdfs:comment "Field voltage value 2 (E2). Typical value = 3,14." . a rdf:Property; ; rdfs:label "se2"@en; rdfs:domain ; ; ; rdfs:comment "Saturation factor at E2 (S[E2]). Typical value = 0,03." . a rdf:Property; ; rdfs:label "kf"@en; rdfs:domain ; ; ; rdfs:comment "Rate feedback gain (KF). Typical value = 0,12." . a rdf:Property; ; rdfs:label "tf"@en; rdfs:domain ; ; ; rdfs:comment "Rate feedback time constant (TF) (>= 0). Typical value = 1." . a rdfs:Class; rdfs:label "ExcAVR2"@en; rdfs:subClassOf ; rdfs:comment "Italian excitation system corresponding to IEEE (1968) type 2 model. It represents an alternator and rotating diodes and electromechanic voltage regulators."; ; . a rdf:Property; ; rdfs:label "ka"@en; rdfs:domain ; ; ; rdfs:comment "AVR gain (KA). Typical value = 500." . a rdf:Property; ; rdfs:label "vrmn"@en; rdfs:domain ; ; ; rdfs:comment "Minimum AVR output (VRMN). Typical value = -6." . a rdf:Property; ; rdfs:label "vrmx"@en; rdfs:domain ; ; ; rdfs:comment "Maximum AVR output (VRMX). Typical value = 7." . a rdf:Property; ; rdfs:label "ta"@en; rdfs:domain ; ; ; rdfs:comment "AVR time constant (TA) (>= 0). Typical value = 0,02." . a rdf:Property; ; rdfs:label "tb"@en; rdfs:domain ; ; ; rdfs:comment "AVR time constant (TB) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "te"@en; rdfs:domain ; ; ; rdfs:comment "Exciter time constant (TE) (>= 0). Typical value = 1." . a rdf:Property; ; rdfs:label "e1"@en; rdfs:domain ; ; ; rdfs:comment "Field voltage value 1 (E1). Typical value = 4,18." . a rdf:Property; ; rdfs:label "se1"@en; rdfs:domain ; ; ; rdfs:comment "Saturation factor at E1 (S[E1]). Typical value = 0.1." . a rdf:Property; ; rdfs:label "e2"@en; rdfs:domain ; ; ; rdfs:comment "Field voltage value 2 (E2). Typical value = 3,14." . a rdf:Property; ; rdfs:label "se2"@en; rdfs:domain ; ; ; rdfs:comment "Saturation factor at E2 (S[E2]). Typical value = 0,03." . a rdf:Property; ; rdfs:label "kf"@en; rdfs:domain ; ; ; rdfs:comment "Rate feedback gain (KF). Typical value = 0,12." . a rdf:Property; ; rdfs:label "tf1"@en; rdfs:domain ; ; ; rdfs:comment "Rate feedback time constant (TF1) (>= 0). Typical value = 1." . a rdf:Property; ; rdfs:label "tf2"@en; rdfs:domain ; ; ; rdfs:comment "Rate feedback time constant (TF2) (>= 0). Typical value = 1." . a rdfs:Class; rdfs:label "ExcAVR3"@en; rdfs:subClassOf ; rdfs:comment "Italian excitation system. It represents an exciter dynamo and electric regulator. "; ; . a rdf:Property; ; rdfs:label "ka"@en; rdfs:domain ; ; ; rdfs:comment "AVR gain (KA). Typical value = 100." . a rdf:Property; ; rdfs:label "vrmn"@en; rdfs:domain ; ; ; rdfs:comment "Minimum AVR output (VRMN). Typical value = -7,5." . a rdf:Property; ; rdfs:label "vrmx"@en; rdfs:domain ; ; ; rdfs:comment "Maximum AVR output (VRMX). Typical value = 7,5." . a rdf:Property; ; rdfs:label "t1"@en; rdfs:domain ; ; ; rdfs:comment "AVR time constant (T1) (>= 0). Typical value = 20." . a rdf:Property; ; rdfs:label "t2"@en; rdfs:domain ; ; ; rdfs:comment "AVR time constant (T2) (>= 0). Typical value = 1,6." . a rdf:Property; ; rdfs:label "t3"@en; rdfs:domain ; ; ; rdfs:comment "AVR time constant (T3) (>= 0). Typical value = 0,66." . a rdf:Property; ; rdfs:label "t4"@en; rdfs:domain ; ; ; rdfs:comment "AVR time constant (T4) (>= 0). Typical value = 0,07." . a rdf:Property; ; rdfs:label "te"@en; rdfs:domain ; ; ; rdfs:comment "Exciter time constant (TE) (>= 0). Typical value = 1." . a rdf:Property; ; rdfs:label "e1"@en; rdfs:domain ; ; ; rdfs:comment "Field voltage value 1 (E1). Typical value = 4,18." . a rdf:Property; ; rdfs:label "se1"@en; rdfs:domain ; ; ; rdfs:comment "Saturation factor at E1 (S[E1]). Typical value = 0,1." . a rdf:Property; ; rdfs:label "e2"@en; rdfs:domain ; ; ; rdfs:comment "Field voltage value 2 (E2). Typical value = 3,14." . a rdf:Property; ; rdfs:label "se2"@en; rdfs:domain ; ; ; rdfs:comment "Saturation factor at E2 (S[E2]). Typical value = 0,03." . a rdfs:Class; rdfs:label "ExcAVR4"@en; rdfs:subClassOf ; rdfs:comment "Italian excitation system. It represents a static exciter and electric voltage regulator."; ; . a rdf:Property; ; rdfs:label "ka"@en; rdfs:domain ; ; ; rdfs:comment "AVR gain (KA). Typical value = 300." . a rdf:Property; ; rdfs:label "vrmn"@en; rdfs:domain ; ; ; rdfs:comment "Minimum AVR output (VRMN). Typical value = 0." . a rdf:Property; ; rdfs:label "vrmx"@en; rdfs:domain ; ; ; rdfs:comment "Maximum AVR output (VRMX). Typical value = 5." . a rdf:Property; ; rdfs:label "t1"@en; rdfs:domain ; ; ; rdfs:comment "AVR time constant (T1) (>= 0). Typical value = 4,8." . a rdf:Property; ; rdfs:label "t2"@en; rdfs:domain ; ; ; rdfs:comment "AVR time constant (T2) (>= 0). Typical value = 1,5." . a rdf:Property; ; rdfs:label "t3"@en; rdfs:domain ; ; ; rdfs:comment "AVR time constant (T3) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "t4"@en; rdfs:domain ; ; ; rdfs:comment "AVR time constant (T4) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "ke"@en; rdfs:domain ; ; ; rdfs:comment "Exciter gain (KE). Typical value = 1." . a rdf:Property; ; rdfs:label "vfmx"@en; rdfs:domain ; ; ; rdfs:comment "Maximum exciter output (VFMX). Typical value = 5." . a rdf:Property; ; rdfs:label "vfmn"@en; rdfs:domain ; ; ; rdfs:comment "Minimum exciter output (VFMN). Typical value = 0." . a rdf:Property; ; rdfs:label "kif"@en; rdfs:domain ; ; ; rdfs:comment "Exciter internal reactance (KIF). Typical value = 0." . a rdf:Property; ; rdfs:label "tif"@en; rdfs:domain ; ; ; rdfs:comment "Exciter current feedback time constant (TIF) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "t1if"@en; rdfs:domain ; ; ; rdfs:comment "Exciter current feedback time constant (T1IF) (>= 0). Typical value = 60." . a rdf:Property; ; rdfs:label "imul"@en; rdfs:domain ; ; ; rdfs:comment """AVR output voltage dependency selector (IMUL). true = selector is connected false = selector is not connected. Typical value = true.""" . a rdfs:Class; rdfs:label "ExcAVR5"@en; rdfs:subClassOf ; rdfs:comment "Manual excitation control with field circuit resistance. This model can be used as a very simple representation of manual voltage control."; ; . a rdf:Property; ; rdfs:label "ka"@en; rdfs:domain ; ; ; rdfs:comment "Gain (Ka)." . a rdf:Property; ; rdfs:label "ta"@en; rdfs:domain ; ; ; rdfs:comment "Time constant (Ta) (>= 0)." . a rdf:Property; ; rdfs:label "rex"@en; rdfs:domain ; ; ; rdfs:comment "Effective output resistance (Rex). Rex represents the effective output resistance seen by the excitation system." . a rdfs:Class; rdfs:label "ExcAVR7"@en; rdfs:subClassOf ; rdfs:comment "IVO excitation system."; ; . a rdf:Property; ; rdfs:label "k1"@en; rdfs:domain ; ; ; rdfs:comment "Gain (K1). Typical value = 1." . a rdf:Property; ; rdfs:label "a1"@en; rdfs:domain ; ; ; rdfs:comment "Lead coefficient (A1). Typical value = 0,5." . a rdf:Property; ; rdfs:label "a2"@en; rdfs:domain ; ; ; rdfs:comment "Lag coefficient (A2). Typical value = 0,5." . a rdf:Property; ; rdfs:label "t1"@en; rdfs:domain ; ; ; rdfs:comment "Lead time constant (T1) (>= 0). Typical value = 0,05." . a rdf:Property; ; rdfs:label "t2"@en; rdfs:domain ; ; ; rdfs:comment "Lag time constant (T2) (>= 0). Typical value = 0,1." . a rdf:Property; ; rdfs:label "vmax1"@en; rdfs:domain ; ; ; rdfs:comment "Lead-lag maximum limit (Vmax1) (> ExcAVR7.vmin1). Typical value = 5." . a rdf:Property; ; rdfs:label "vmin1"@en; rdfs:domain ; ; ; rdfs:comment "Lead-lag minimum limit (Vmin1) (< ExcAVR7.vmax1). Typical value = -5." . a rdf:Property; ; rdfs:label "k3"@en; rdfs:domain ; ; ; rdfs:comment "Gain (K3). Typical value = 3." . a rdf:Property; ; rdfs:label "a3"@en; rdfs:domain ; ; ; rdfs:comment "Lead coefficient (A3). Typical value = 0,5." . a rdf:Property; ; rdfs:label "a4"@en; rdfs:domain ; ; ; rdfs:comment "Lag coefficient (A4). Typical value = 0,5." . a rdf:Property; ; rdfs:label "t3"@en; rdfs:domain ; ; ; rdfs:comment "Lead time constant (T3) (>= 0). Typical value = 0,1." . a rdf:Property; ; rdfs:label "t4"@en; rdfs:domain ; ; ; rdfs:comment "Lag time constant (T4) (>= 0). Typical value = 0,1." . a rdf:Property; ; rdfs:label "vmax3"@en; rdfs:domain ; ; ; rdfs:comment "Lead-lag maximum limit (Vmax3) (> ExcAVR7.vmin3). Typical value = 5." . a rdf:Property; ; rdfs:label "vmin3"@en; rdfs:domain ; ; ; rdfs:comment "Lead-lag minimum limit (Vmin3) (< ExcAVR7.vmax3). Typical value = -5." . a rdf:Property; ; rdfs:label "k5"@en; rdfs:domain ; ; ; rdfs:comment "Gain (K5). Typical value = 1." . a rdf:Property; ; rdfs:label "a5"@en; rdfs:domain ; ; ; rdfs:comment "Lead coefficient (A5). Typical value = 0,5." . a rdf:Property; ; rdfs:label "a6"@en; rdfs:domain ; ; ; rdfs:comment "Lag coefficient (A6). Typical value = 0,5." . a rdf:Property; ; rdfs:label "t5"@en; rdfs:domain ; ; ; rdfs:comment "Lead time constant (T5) (>= 0). Typical value = 0,1." . a rdf:Property; ; rdfs:label "t6"@en; rdfs:domain ; ; ; rdfs:comment "Lag time constant (T6) (>= 0). Typical value = 0,1." . a rdf:Property; ; rdfs:label "vmax5"@en; rdfs:domain ; ; ; rdfs:comment "Lead-lag maximum limit (Vmax5) (> ExcAVR7.vmin5). Typical value = 5." . a rdf:Property; ; rdfs:label "vmin5"@en; rdfs:domain ; ; ; rdfs:comment "Lead-lag minimum limit (Vmin5) (< ExcAVR7.vmax5). Typical value = -2." . a rdfs:Class; rdfs:label "ExcBBC"@en; rdfs:subClassOf ; rdfs:comment "Transformer fed static excitation system (static with ABB regulator). This model represents a static excitation system in which a gated thyristor bridge fed by a transformer at the main generator terminals feeds the main generator directly."; ; . a rdf:Property; ; rdfs:label "t1"@en; rdfs:domain ; ; ; rdfs:comment "Controller time constant (T1) (>= 0). Typical value = 6." . a rdf:Property; ; rdfs:label "t2"@en; rdfs:domain ; ; ; rdfs:comment "Controller time constant (T2) (>= 0). Typical value = 1." . a rdf:Property; ; rdfs:label "t3"@en; rdfs:domain ; ; ; rdfs:comment "Lead/lag time constant (T3) (>= 0). If = 0, block is bypassed. Typical value = 0,05." . a rdf:Property; ; rdfs:label "t4"@en; rdfs:domain ; ; ; rdfs:comment "Lead/lag time constant (T4) (>= 0). If = 0, block is bypassed. Typical value = 0,01." . a rdf:Property; ; rdfs:label "k"@en; rdfs:domain ; ; ; rdfs:comment "Steady state gain (K) (not = 0). Typical value = 300." . a rdf:Property; ; rdfs:label "vrmin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum control element output (Vrmin) (< ExcBBC.vrmax). Typical value = -5." . a rdf:Property; ; rdfs:label "vrmax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum control element output (Vrmax) (> ExcBBC.vrmin). Typical value = 5." . a rdf:Property; ; rdfs:label "efdmin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum open circuit exciter voltage (Efdmin) (< ExcBBC.efdmax). Typical value = -5." . a rdf:Property; ; rdfs:label "efdmax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum open circuit exciter voltage (Efdmax) (> ExcBBC.efdmin). Typical value = 5." . ; rdfs:label "xe"@en; a rdf:Property; rdfs:domain ; ; ; rdfs:comment "Effective excitation transformer reactance (Xe) (>= 0). Xe models the regulation of the transformer/rectifier unit. Typical value = 0,05." . a rdf:Property; ; rdfs:label "switch"@en; rdfs:domain ; ; ; rdfs:comment """Supplementary signal routing selector (switch). true = Vs connected to 3rd summing point false = Vs connected to 1st summing point (see diagram). Typical value = false.""" . a rdfs:Class; rdfs:label "ExcCZ"@en; rdfs:subClassOf ; rdfs:comment "Czech proportion/integral exciter."; ; . a rdf:Property; ; rdfs:label "kp"@en; rdfs:domain ; ; ; rdfs:comment "Regulator proportional gain (Kp)." . a rdf:Property; ; rdfs:label "tc"@en; rdfs:domain ; ; ; rdfs:comment "Regulator integral time constant (Tc) (>= 0). " . a rdf:Property; ; rdfs:label "vrmax"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator maximum limit (Vrmax) (> ExcCZ.vrmin). " . a rdf:Property; ; rdfs:label "vrmin"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator minimum limit (Vrmin) (< ExcCZ.vrmax). " . a rdf:Property; ; rdfs:label "ka"@en; rdfs:domain ; ; ; rdfs:comment "Regulator gain (Ka)." . a rdf:Property; ; rdfs:label "ta"@en; rdfs:domain ; ; ; rdfs:comment "Regulator time constant (Ta) (>= 0)." . a rdf:Property; ; rdfs:label "ke"@en; rdfs:domain ; ; ; rdfs:comment "Exciter constant related to self-excited field (Ke)." . a rdf:Property; ; rdfs:label "te"@en; rdfs:domain ; ; ; rdfs:comment "Exciter time constant, integration rate associated with exciter control (Te) (>= 0)." . a rdf:Property; ; rdfs:label "efdmax"@en; rdfs:domain ; ; ; rdfs:comment "Exciter output maximum limit (Efdmax) (> ExcCZ.efdmin)." . a rdf:Property; ; rdfs:label "efdmin"@en; rdfs:domain ; ; ; rdfs:comment "Exciter output minimum limit (Efdmin) (< ExcCZ.efdmax). " . a rdfs:Class; rdfs:label "ExcDC1A"@en; rdfs:subClassOf ; rdfs:comment "Modified IEEE DC1A direct current commutator exciter with speed input and without underexcitation limiters (UEL) inputs."; ; . a rdf:Property; ; rdfs:label "ka"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator gain (Ka) (> 0). Typical value = 46." . a rdf:Property; ; rdfs:label "ks"@en; rdfs:domain ; ; ; rdfs:comment "Coefficient to allow different usage of the model-speed coefficient (Ks). Typical value = 0." . a rdf:Property; ; rdfs:label "ta"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator time constant (Ta) (> 0). Typical value = 0,06." . a rdf:Property; ; rdfs:label "tb"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator time constant (Tb) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "tc"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator time constant (Tc) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "vrmax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum voltage regulator output (Vrmax) (> ExcDC1A.vrmin). Typical value = 1." . a rdf:Property; ; rdfs:label "vrmin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum voltage regulator output (Vrmin) (< 0 and < ExcDC1A.vrmax). Typical value = -0,9." . a rdf:Property; ; rdfs:label "ke"@en; rdfs:domain ; ; ; rdfs:comment "Exciter constant related to self-excited field (Ke). Typical value = 0." . a rdf:Property; ; rdfs:label "te"@en; rdfs:domain ; ; ; rdfs:comment "Exciter time constant, integration rate associated with exciter control (Te) (> 0). Typical value = 0,46." . a rdf:Property; ; rdfs:label "kf"@en; rdfs:domain ; ; ; rdfs:comment "Excitation control system stabilizer gain (Kf) (>= 0). Typical value = 0,1." . a rdf:Property; ; rdfs:label "tf"@en; rdfs:domain ; ; ; rdfs:comment "Excitation control system stabilizer time constant (Tf) (> 0). Typical value = 1." . a rdf:Property; ; rdfs:label "efd1"@en; rdfs:domain ; ; ; rdfs:comment "Exciter voltage at which exciter saturation is defined (Efd1) (> 0). Typical value = 3,1." . a rdf:Property; ; rdfs:label "seefd1"@en; rdfs:domain ; ; ; rdfs:comment "Exciter saturation function value at the corresponding exciter voltage, Efd1 (Se[Eefd1]) (>= 0). Typical value = 0,33." . a rdf:Property; ; rdfs:label "efd2"@en; rdfs:domain ; ; ; rdfs:comment "Exciter voltage at which exciter saturation is defined (Efd2) (> 0). Typical value = 2,3." . a rdf:Property; ; rdfs:label "seefd2"@en; rdfs:domain ; ; ; rdfs:comment "Exciter saturation function value at the corresponding exciter voltage, Efd2 (Se[Eefd2]) (>= 0). Typical value = 0,1." . a rdf:Property; ; rdfs:label "exclim"@en; rdfs:domain ; ; ; rdfs:comment """(exclim). IEEE standard is ambiguous about lower limit on exciter output. true = a lower limit of zero is applied to integrator output false = a lower limit of zero is not applied to integrator output. Typical value = true.""" . a rdf:Property; ; rdfs:label "efdmin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum voltage exciter output limiter (Efdmin) (< ExcDC1A.edfmax). Typical value = -99." . a rdf:Property; ; rdfs:label "efdmax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum voltage exciter output limiter (Efdmax) (> ExcDC1A.efdmin). Typical value = 99." . a rdfs:Class; rdfs:label "ExcDC2A"@en; rdfs:subClassOf ; rdfs:comment "Modified IEEE DC2A direct current commutator exciter with speed input, one more leg block in feedback loop and without underexcitation limiters (UEL) inputs. DC type 2 excitation system model with added speed multiplier, added lead-lag, and voltage-dependent limits."; ; . a rdf:Property; ; rdfs:label "ka"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator gain (Ka) (> 0). Typical value = 300." . a rdf:Property; ; rdfs:label "ks"@en; rdfs:domain ; ; ; rdfs:comment "Coefficient to allow different usage of the model-speed coefficient (Ks). Typical value = 0." . a rdf:Property; ; rdfs:label "ta"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator time constant (Ta) (> 0). Typical value = 0,01." . a rdf:Property; ; rdfs:label "tb"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator time constant (Tb) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "tc"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator time constant (Tc) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "vrmax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum voltage regulator output (Vrmax) (> ExcDC2A.vrmin). Typical value = 4,95." . a rdf:Property; ; rdfs:label "vrmin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum voltage regulator output (Vrmin) (< 0 and < ExcDC2A.vrmax). Typical value = -4,9." . a rdf:Property; ; rdfs:label "ke"@en; rdfs:domain ; ; ; rdfs:comment "Exciter constant related to self-excited field (Ke). If Ke is entered as zero, the model calculates an effective value of Ke such that the initial condition value of Vr is zero. The zero value of Ke is not changed. If Ke is entered as non-zero, its value is used directly, without change. Typical value = 1." . a rdf:Property; ; rdfs:label "te"@en; rdfs:domain ; ; ; rdfs:comment "Exciter time constant, integration rate associated with exciter control (Te) (> 0). Typical value = 1,33." . a rdf:Property; ; rdfs:label "kf"@en; rdfs:domain ; ; ; rdfs:comment "Excitation control system stabilizer gain (Kf) (>= 0). Typical value = 0,1." . a rdf:Property; ; rdfs:label "tf"@en; rdfs:domain ; ; ; rdfs:comment "Excitation control system stabilizer time constant (Tf) (> 0). Typical value = 0,675." . a rdf:Property; ; rdfs:label "tf1"@en; rdfs:domain ; ; ; rdfs:comment "Excitation control system stabilizer time constant (Tf1) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "efd1"@en; rdfs:domain ; ; ; rdfs:comment "Exciter voltage at which exciter saturation is defined (Efd1) (> 0). Typical value = 3,05." . a rdf:Property; ; rdfs:label "seefd1"@en; rdfs:domain ; ; ; rdfs:comment "Exciter saturation function value at the corresponding exciter voltage, Efd1 (Se[Efd1]) (>= 0). Typical value = 0,279." . a rdf:Property; ; rdfs:label "efd2"@en; rdfs:domain ; ; ; rdfs:comment "Exciter voltage at which exciter saturation is defined (Efd2) (> 0). Typical value = 2,29." . a rdf:Property; ; rdfs:label "seefd2"@en; rdfs:domain ; ; ; rdfs:comment "Exciter saturation function value at the corresponding exciter voltage, Efd2 (Se[Efd2]) (>= 0). Typical value = 0,117." . a rdf:Property; ; rdfs:label "exclim"@en; rdfs:domain ; ; ; rdfs:comment """(exclim). IEEE standard is ambiguous about lower limit on exciter output. true = a lower limit of zero is applied to integrator output false = a lower limit of zero is not applied to integrator output. Typical value = true.""" . a rdf:Property; ; rdfs:label "vtlim"@en; rdfs:domain ; ; ; rdfs:comment """(Vtlim). true = limiter at the block (Ka / [1 + sTa]) is dependent on Vt false = limiter at the block is not dependent on Vt. Typical value = true.""" . a rdfs:Class; rdfs:label "ExcDC3A"@en; rdfs:subClassOf ; rdfs:comment "Modified IEEE DC3A direct current commutator exciter with speed input, and deadband. DC old type 4."; ; . a rdf:Property; ; rdfs:label "trh"@en; rdfs:domain ; ; ; rdfs:comment "Rheostat travel time (Trh) (> 0). Typical value = 20." . a rdf:Property; ; rdfs:label "ks"@en; rdfs:domain ; ; ; rdfs:comment "Coefficient to allow different usage of the model-speed coefficient (Ks). Typical value = 0." . a rdf:Property; ; rdfs:label "kr"@en; rdfs:domain ; ; ; rdfs:comment "Deadband (Kr). Typical value = 0." . a rdf:Property; ; rdfs:label "kv"@en; rdfs:domain ; ; ; rdfs:comment "Fast raise/lower contact setting (Kv) (> 0). Typical value = 0,05." . a rdf:Property; ; rdfs:label "vrmax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum voltage regulator output (Vrmax) (> 0). Typical value = 5." . a rdf:Property; ; rdfs:label "vrmin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum voltage regulator output (Vrmin) (<= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "te"@en; rdfs:domain ; ; ; rdfs:comment "Exciter time constant, integration rate associated with exciter control (Te) (> 0). Typical value = 1,83." . a rdf:Property; ; rdfs:label "ke"@en; rdfs:domain ; ; ; rdfs:comment "Exciter constant related to self-excited field (Ke). Typical value = 1." . a rdf:Property; ; rdfs:label "efd1"@en; rdfs:domain ; ; ; rdfs:comment "Exciter voltage at which exciter saturation is defined (Efd1) (> 0). Typical value = 2,6." . a rdf:Property; ; rdfs:label "seefd1"@en; rdfs:domain ; ; ; rdfs:comment "Exciter saturation function value at the corresponding exciter voltage, Efd1 (Se[Efd1]) (>= 0). Typical value = 0,1." . a rdf:Property; ; rdfs:label "efd2"@en; rdfs:domain ; ; ; rdfs:comment "Exciter voltage at which exciter saturation is defined (Efd2) (> 0). Typical value = 3,45." . a rdf:Property; ; rdfs:label "seefd2"@en; rdfs:domain ; ; ; rdfs:comment "Exciter saturation function value at the corresponding exciter voltage, Efd2 (Se[Efd2]) (>= 0). Typical value = 0,35." . a rdf:Property; ; rdfs:label "exclim"@en; rdfs:domain ; ; ; rdfs:comment """(exclim). IEEE standard is ambiguous about lower limit on exciter output. true = a lower limit of zero is applied to integrator output false = a lower limit of zero not applied to integrator output. Typical value = true.""" . a rdf:Property; ; rdfs:label "efdmax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum voltage exciter output limiter (Efdmax) (> ExcDC3A.efdmin). Typical value = 99." . a rdf:Property; ; rdfs:label "efdmin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum voltage exciter output limiter (Efdmin) (< ExcDC3A.efdmax). Typical value = -99." . a rdf:Property; ; rdfs:label "efdlim"@en; rdfs:domain ; ; ; rdfs:comment """(Efdlim). true = exciter output limiter is active false = exciter output limiter not active. Typical value = true.""" . a rdfs:Class; rdfs:label "ExcDC3A1"@en; rdfs:subClassOf ; rdfs:comment "Modified old IEEE type 3 excitation system."; ; . a rdf:Property; ; rdfs:label "ka"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator gain (Ka) (> 0). Typical value = 300." . a rdf:Property; ; rdfs:label "ta"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator time constant (Ta) (> 0). Typical value = 0,01." . a rdf:Property; ; rdfs:label "vrmax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum voltage regulator output (Vrmax) (> ExcDC3A1.vrmin). Typical value = 5." . a rdf:Property; ; rdfs:label "vrmin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum voltage regulator output (Vrmin) (< 0 and < ExcDC3A1.vrmax). Typical value = 0." . a rdf:Property; ; rdfs:label "te"@en; rdfs:domain ; ; ; rdfs:comment "Exciter time constant, integration rate associated with exciter control (Te) (> 0). Typical value = 1,83." . a rdf:Property; ; rdfs:label "kf"@en; rdfs:domain ; ; ; rdfs:comment "Excitation control system stabilizer gain (Kf) (>= 0). Typical value = 0,1." . a rdf:Property; ; rdfs:label "tf"@en; rdfs:domain ; ; ; rdfs:comment "Excitation control system stabilizer time constant (Tf) (>= 0). Typical value = 0,675." . a rdf:Property; ; rdfs:label "kp"@en; rdfs:domain ; ; ; rdfs:comment "Potential circuit gain coefficient (Kp) (>= 0). Typical value = 4,37." . a rdf:Property; ; rdfs:label "ki"@en; rdfs:domain ; ; ; rdfs:comment "Potential circuit gain coefficient (Ki) (>= 0). Typical value = 4,83." . a rdf:Property; ; rdfs:label "vbmax"@en; rdfs:domain ; ; ; rdfs:comment "Available exciter voltage limiter (Vbmax) (> 0). Typical value = 11,63." . a rdf:Property; ; rdfs:label "exclim"@en; rdfs:domain ; ; ; rdfs:comment """(exclim). true = lower limit of zero is applied to integrator output false = lower limit of zero not applied to integrator output. Typical value = true.""" . a rdf:Property; ; rdfs:label "ke"@en; rdfs:domain ; ; ; rdfs:comment "Exciter constant related to self-excited field (Ke). Typical value = 1." . a rdf:Property; ; rdfs:label "vb1max"@en; rdfs:domain ; ; ; rdfs:comment "Available exciter voltage limiter (Vb1max) (> 0). Typical value = 11,63." . a rdf:Property; ; rdfs:label "vblim"@en; rdfs:domain ; ; ; rdfs:comment """Vb limiter indicator. true = exciter Vbmax limiter is active false = Vb1max is active. Typical value = true.""" . a rdfs:Class; rdfs:label "ExcELIN1"@en; rdfs:subClassOf ; rdfs:comment "Static PI transformer fed excitation system ELIN (VATECH) - simplified model. This model represents an all-static excitation system. A PI voltage controller establishes a desired field current set point for a proportional current controller. The integrator of the PI controller has a follow-up input to match its signal to the present field current. A power system stabilizer with power input is included in the model."; ; . a rdf:Property; ; rdfs:label "tfi"@en; rdfs:domain ; ; ; rdfs:comment "Current transducer time constant (Tfi) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "tnu"@en; rdfs:domain ; ; ; rdfs:comment "Controller reset time constant (Tnu) (>= 0). Typical value = 2." . a rdf:Property; ; rdfs:label "vpu"@en; rdfs:domain ; ; ; rdfs:comment "Voltage controller proportional gain (Vpu). Typical value = 34,5." . a rdf:Property; ; rdfs:label "vpi"@en; rdfs:domain ; ; ; rdfs:comment "Current controller gain (Vpi). Typical value = 12,45." . a rdf:Property; ; rdfs:label "vpnf"@en; rdfs:domain ; ; ; rdfs:comment "Controller follow up gain (Vpnf). Typical value = 2." . a rdf:Property; ; rdfs:label "dpnf"@en; rdfs:domain ; ; ; rdfs:comment "Controller follow up deadband (Dpnf). Typical value = 0." . a rdf:Property; ; rdfs:label "tsw"@en; rdfs:domain ; ; ; rdfs:comment "Stabilizer parameters (Tsw) (>= 0). Typical value = 3." . a rdf:Property; ; rdfs:label "efmin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum open circuit excitation voltage (Efmin) (< ExcELIN1.efmax). Typical value = -5." . a rdf:Property; ; rdfs:label "efmax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum open circuit excitation voltage (Efmax) (> ExcELIN1.efmin). Typical value = 5." . a rdf:Property; ; rdfs:label "xe"@en; rdfs:domain ; ; ; rdfs:comment "Excitation transformer effective reactance (Xe) (>= 0). Xe represents the regulation of the transformer/rectifier unit. Typical value = 0,06." . a rdf:Property; ; rdfs:label "ks1"@en; rdfs:domain ; ; ; rdfs:comment "Stabilizer gain 1 (Ks1). Typical value = 0." . a rdf:Property; ; rdfs:label "ks2"@en; rdfs:domain ; ; ; rdfs:comment "Stabilizer gain 2 (Ks2). Typical value = 0." . a rdf:Property; ; rdfs:label "ts1"@en; rdfs:domain ; ; ; rdfs:comment "Stabilizer phase lag time constant (Ts1) (>= 0). Typical value = 1." . a rdf:Property; ; rdfs:label "ts2"@en; rdfs:domain ; ; ; rdfs:comment "Stabilizer filter time constant (Ts2) (>= 0). Typical value = 1." . a rdf:Property; ; rdfs:label "smax"@en; rdfs:domain ; ; ; rdfs:comment "Stabilizer limit output (smax). Typical value = 0,1." . a rdfs:Class; rdfs:label "ExcELIN2"@en; rdfs:subClassOf ; rdfs:comment "Detailed excitation system ELIN (VATECH). This model represents an all-static excitation system. A PI voltage controller establishes a desired field current set point for a proportional current controller. The integrator of the PI controller has a follow-up input to match its signal to the present field current. Power system stabilizer models used in conjunction with this excitation system model: PssELIN2, PssIEEE2B, Pss2B."; ; . a rdf:Property; ; rdfs:label "k1"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator input gain (K1). Typical value = 0." . a rdf:Property; ; rdfs:label "k1ec"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator input limit (K1ec). Typical value = 2." . a rdf:Property; ; rdfs:label "kd1"@en; rdfs:domain ; ; ; rdfs:comment "Voltage controller derivative gain (Kd1). Typical value = 34,5." . a rdf:Property; ; rdfs:label "tb1"@en; rdfs:domain ; ; ; rdfs:comment "Voltage controller derivative washout time constant (Tb1) (>= 0). Typical value = 12,45." . a rdf:Property; ; rdfs:label "pid1max"@en; rdfs:domain ; ; ; rdfs:comment "Controller follow up gain (PID1max). Typical value = 2." . a rdf:Property; ; rdfs:label "ti1"@en; rdfs:domain ; ; ; rdfs:comment "Controller follow up deadband (Ti1). Typical value = 0." . a rdf:Property; ; rdfs:label "iefmax2"@en; rdfs:domain ; ; ; rdfs:comment "Minimum open circuit excitation voltage (Iefmax2). Typical value = -5." . a rdf:Property; ; rdfs:label "k2"@en; rdfs:domain ; ; ; rdfs:comment "Gain (K2). Typical value = 5." . a rdf:Property; ; rdfs:label "ketb"@en; rdfs:domain ; ; ; rdfs:comment "Gain (Ketb). Typical value = 0,06." . a rdf:Property; ; rdfs:label "upmax"@en; rdfs:domain ; ; ; rdfs:comment "Limiter (Upmax) (> ExcELIN2.upmin). Typical value = 3." . a rdf:Property; ; rdfs:label "upmin"@en; rdfs:domain ; ; ; rdfs:comment "Limiter (Upmin) (< ExcELIN2.upmax). Typical value = 0." . a rdf:Property; ; rdfs:label "te"@en; rdfs:domain ; ; ; rdfs:comment "Time constant (Te) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "xp"@en; rdfs:domain ; ; ; rdfs:comment "Excitation transformer effective reactance (Xp). Typical value = 1." . a rdf:Property; ; rdfs:label "te2"@en; rdfs:domain ; ; ; rdfs:comment "Time Constant (Te2) (>= 0). Typical value = 1." . a rdf:Property; ; rdfs:label "ke2"@en; rdfs:domain ; ; ; rdfs:comment "Gain (Ke2). Typical value = 0,1." . a rdf:Property; ; rdfs:label "ve1"@en; rdfs:domain ; ; ; rdfs:comment "Exciter alternator output voltages back of commutating reactance at which saturation is defined (Ve1) (> 0). Typical value = 3." . a rdf:Property; ; rdfs:label "seve1"@en; rdfs:domain ; ; ; rdfs:comment "Exciter saturation function value at the corresponding exciter voltage, Ve1, back of commutating reactance (Se[Ve1]) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "ve2"@en; rdfs:domain ; ; ; rdfs:comment "Exciter alternator output voltages back of commutating reactance at which saturation is defined (Ve2) (> 0). Typical value = 0." . a rdf:Property; ; rdfs:label "seve2"@en; rdfs:domain ; ; ; rdfs:comment "Exciter saturation function value at the corresponding exciter voltage, Ve2, back of commutating reactance (Se[Ve2]) (>= 0). Typical value = 1." . a rdf:Property; ; rdfs:label "tr4"@en; rdfs:domain ; ; ; rdfs:comment "Time constant (Tr4) (>= 0). Typical value = 1." . a rdf:Property; ; rdfs:label "k3"@en; rdfs:domain ; ; ; rdfs:comment "Gain (K3). Typical value = 0,1." . a rdf:Property; ; rdfs:label "ti3"@en; rdfs:domain ; ; ; rdfs:comment "Time constant (Ti3) (>= 0). Typical value = 3." . a rdf:Property; ; rdfs:label "k4"@en; rdfs:domain ; ; ; rdfs:comment "Gain (K4). Typical value = 0." . a rdf:Property; ; rdfs:label "ti4"@en; rdfs:domain ; ; ; rdfs:comment "Time constant (Ti4) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "iefmax"@en; rdfs:domain ; ; ; rdfs:comment "Limiter (Iefmax) (> ExcELIN2.iefmin). Typical value = 1." . a rdf:Property; ; rdfs:label "iefmin"@en; rdfs:domain ; ; ; rdfs:comment "Limiter (Iefmin) (< ExcELIN2.iefmax). Typical value = 1." . a rdf:Property; ; rdfs:label "efdbas"@en; rdfs:domain ; ; ; rdfs:comment "Gain (Efdbas). Typical value = 0,1." . a rdfs:Class; rdfs:label "ExcHU"@en; rdfs:subClassOf ; rdfs:comment "Hungarian excitation system, with built-in voltage transducer."; ; . a rdf:Property; ; rdfs:label "tr"@en; rdfs:domain ; ; ; rdfs:comment "Filter time constant (Tr) (>= 0). If a voltage compensator is used in conjunction with this excitation system model, Tr should be set to 0. Typical value = 0,01." . a rdf:Property; ; rdfs:label "te"@en; rdfs:domain ; ; ; rdfs:comment "Major loop PI tag integration time constant (Te) (>= 0). Typical value = 0,154." . a rdf:Property; ; rdfs:label "imin"@en; rdfs:domain ; ; ; rdfs:comment "Major loop PI tag output signal lower limit (Imin) (< ExcHU.imax). Typical value = 0,1." . a rdf:Property; ; rdfs:label "imax"@en; rdfs:domain ; ; ; rdfs:comment "Major loop PI tag output signal upper limit (Imax) (> ExcHU.imin). Typical value = 2,19." . a rdf:Property; ; rdfs:label "ae"@en; rdfs:domain ; ; ; rdfs:comment "Major loop PI tag gain factor (Ae). Typical value = 3." . a rdf:Property; ; rdfs:label "emin"@en; rdfs:domain ; ; ; rdfs:comment "Field voltage control signal lower limit on AVR base (Emin) (< ExcHU.emax). Typical value = -0,866." . a rdf:Property; ; rdfs:label "emax"@en; rdfs:domain ; ; ; rdfs:comment "Field voltage control signal upper limit on AVR base (Emax) (> ExcHU.emin). Typical value = 0,996." . a rdf:Property; ; rdfs:label "ki"@en; rdfs:domain ; ; ; rdfs:comment "Current base conversion constant (Ki). Typical value = 0,21428." . a rdf:Property; ; rdfs:label "ai"@en; rdfs:domain ; ; ; rdfs:comment "Minor loop PI tag gain factor (Ai). Typical value = 22." . a rdf:Property; ; rdfs:label "ti"@en; rdfs:domain ; ; ; rdfs:comment "Minor loop PI control tag integration time constant (Ti) (>= 0). Typical value = 0,01333." . a rdf:Property; ; rdfs:label "atr"@en; rdfs:domain ; ; ; rdfs:comment "AVR constant (Atr). Typical value = 2,19." . a rdf:Property; ; rdfs:label "ke"@en; rdfs:domain ; ; ; rdfs:comment "Voltage base conversion constant (Ke). Typical value = 4,666." . a rdfs:Class; rdfs:label "ExcNI"@en; rdfs:subClassOf ; rdfs:comment "Bus or solid fed SCR (silicon-controlled rectifier) bridge excitation system model type NI (NVE)."; ; . a rdf:Property; ; rdfs:label "busFedSelector"@en; rdfs:domain ; ; ; rdfs:comment """Fed by selector (BusFedSelector). true = bus fed (switch is closed) false = solid fed (switch is open). Typical value = true.""" . a rdf:Property; ; rdfs:label "tr"@en; rdfs:domain ; ; ; rdfs:comment "Time constant (Tr) (>= 0). Typical value = 0,02." . a rdf:Property; ; rdfs:label "ka"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator gain (Ka) (> 0). Typical value = 210." . ; rdfs:label "ta"@en; rdfs:domain ; a rdf:Property; ; ; rdfs:comment "Voltage regulator time constant (Ta) (> 0). Typical value = 0,02." . a rdf:Property; ; rdfs:label "vrmax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum voltage regulator ouput (Vrmax) (> ExcNI.vrmin). Typical value = 5,0." . a rdf:Property; ; rdfs:label "vrmin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum voltage regulator ouput (Vrmin) (< ExcNI.vrmax). Typical value = -2,0." . a rdf:Property; ; rdfs:label "kf"@en; rdfs:domain ; ; ; rdfs:comment "Excitation control system stabilizer gain (Kf) (> 0). Typical value 0,01." . a rdf:Property; ; rdfs:label "tf2"@en; rdfs:domain ; ; ; rdfs:comment "Excitation control system stabilizer time constant (Tf2) (> 0). Typical value = 0,1." . a rdf:Property; ; rdfs:label "tf1"@en; rdfs:domain ; ; ; rdfs:comment "Excitation control system stabilizer time constant (Tf1) (> 0). Typical value = 1,0." . a rdf:Property; ; rdfs:label "r"@en; rdfs:domain ; ; ; rdfs:comment """rc / rfd (R) (>= 0). 0 means exciter has negative current capability > 0 means exciter does not have negative current capability. Typical value = 5.""" . a rdfs:Class; rdfs:label "ExcOEX3T"@en; rdfs:subClassOf ; rdfs:comment "Modified IEEE type ST1 excitation system with semi-continuous and acting terminal voltage limiter."; ; . a rdf:Property; ; rdfs:label "t1"@en; rdfs:domain ; ; ; rdfs:comment "Time constant (T1) (>= 0)." . a rdf:Property; ; rdfs:label "t2"@en; rdfs:domain ; ; ; rdfs:comment "Time constant (T2) (>= 0)." . a rdf:Property; ; rdfs:label "t3"@en; rdfs:domain ; ; ; rdfs:comment "Time constant (T3) (>= 0)." . a rdf:Property; ; rdfs:label "t4"@en; rdfs:domain ; ; ; rdfs:comment "Time constant (T4) (>= 0)." . a rdf:Property; ; rdfs:label "ka"@en; rdfs:domain ; ; ; rdfs:comment "Gain (KA)." . a rdf:Property; ; rdfs:label "t5"@en; rdfs:domain ; ; ; rdfs:comment "Time constant (T5) (>= 0)." . a rdf:Property; ; rdfs:label "t6"@en; rdfs:domain ; ; ; rdfs:comment "Time constant (T6) (>= 0)." . a rdf:Property; ; rdfs:label "vrmax"@en; rdfs:domain ; ; ; rdfs:comment "Limiter (VRMAX) (> ExcOEX3T.vrmin)." . a rdf:Property; ; rdfs:label "vrmin"@en; rdfs:domain ; ; ; rdfs:comment "Limiter (VRMIN) (< ExcOEX3T.vrmax). " . a rdf:Property; ; rdfs:label "te"@en; rdfs:domain ; ; ; rdfs:comment "Time constant (TE) (>= 0)." . a rdf:Property; ; rdfs:label "kf"@en; rdfs:domain ; ; ; rdfs:comment "Gain (KF)." . a rdf:Property; ; rdfs:label "tf"@en; rdfs:domain ; ; ; rdfs:comment "Time constant (TF) (>= 0)." . a rdf:Property; ; rdfs:label "kc"@en; rdfs:domain ; ; ; rdfs:comment "Gain (KC)." . a rdf:Property; ; rdfs:label "kd"@en; rdfs:domain ; ; ; rdfs:comment "Gain (KD)." . a rdf:Property; ; rdfs:label "ke"@en; rdfs:domain ; ; ; rdfs:comment "Gain (KE)." . a rdf:Property; ; rdfs:label "e1"@en; rdfs:domain ; ; ; rdfs:comment "Saturation parameter (E1)." . a rdf:Property; ; rdfs:label "see1"@en; rdfs:domain ; ; ; rdfs:comment "Saturation parameter (SE[E1])." . a rdf:Property; ; rdfs:label "e2"@en; rdfs:domain ; ; ; rdfs:comment "Saturation parameter (E2)." . a rdf:Property; ; rdfs:label "see2"@en; rdfs:domain ; ; ; rdfs:comment "Saturation parameter (SE[E2])." . a rdfs:Class; rdfs:label "ExcPIC"@en; rdfs:subClassOf ; rdfs:comment "Proportional/integral regulator excitation system. This model can be used to represent excitation systems with a proportional-integral (PI) voltage regulator controller. "; ; . a rdf:Property; ; rdfs:label "ka"@en; rdfs:domain ; ; ; rdfs:comment "PI controller gain (Ka). Typical value = 3,15." . a rdf:Property; ; rdfs:label "ta1"@en; rdfs:domain ; ; ; rdfs:comment "PI controller time constant (Ta1) (>= 0). Typical value = 1." . a rdf:Property; ; rdfs:label "vr1"@en; rdfs:domain ; ; ; rdfs:comment "PI maximum limit (Vr1). Typical value = 1." . a rdf:Property; ; rdfs:label "vr2"@en; rdfs:domain ; ; ; rdfs:comment "PI minimum limit (Vr2). Typical value = -0,87." . a rdf:Property; ; rdfs:label "ta2"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator time constant (Ta2) (>= 0). Typical value = 0,01." . a rdf:Property; ; rdfs:label "ta3"@en; rdfs:domain ; ; ; rdfs:comment "Lead time constant (Ta3) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "ta4"@en; rdfs:domain ; ; ; rdfs:comment "Lag time constant (Ta4) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "vrmax"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator maximum limit (Vrmax) (> ExcPIC.vrmin). Typical value = 1." . a rdf:Property; ; rdfs:label "vrmin"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator minimum limit (Vrmin) (< ExcPIC.vrmax). Typical value = -0,87." . a rdf:Property; ; rdfs:label "kf"@en; rdfs:domain ; ; ; rdfs:comment "Rate feedback gain (Kf). Typical value = 0." . a rdf:Property; ; rdfs:label "tf1"@en; rdfs:domain ; ; ; rdfs:comment "Rate feedback time constant (Tf1) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "tf2"@en; rdfs:domain ; ; ; rdfs:comment "Rate feedback lag time constant (Tf2) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "efdmax"@en; rdfs:domain ; ; ; rdfs:comment "Exciter maximum limit (Efdmax) (> ExcPIC.efdmin). Typical value = 8." . a rdf:Property; ; rdfs:label "efdmin"@en; rdfs:domain ; ; ; rdfs:comment "Exciter minimum limit (Efdmin) (< ExcPIC.efdmax). Typical value = -0,87." . a rdf:Property; ; rdfs:label "ke"@en; rdfs:domain ; ; ; rdfs:comment "Exciter constant (Ke). Typical value = 0." . a rdf:Property; ; rdfs:label "te"@en; rdfs:domain ; ; ; rdfs:comment "Exciter time constant (Te) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "e1"@en; rdfs:domain ; ; ; rdfs:comment "Field voltage value 1 (E1). Typical value = 0." . a rdf:Property; ; rdfs:label "se1"@en; rdfs:domain ; ; ; rdfs:comment "Saturation factor at E1 (Se1). Typical value = 0." . a rdf:Property; ; rdfs:label "e2"@en; rdfs:domain ; ; ; rdfs:comment "Field voltage value 2 (E2). Typical value = 0." . a rdf:Property; ; rdfs:label "se2"@en; rdfs:domain ; ; ; rdfs:comment "Saturation factor at E2 (Se2). Typical value = 0." . a rdf:Property; ; rdfs:label "kp"@en; rdfs:domain ; ; ; rdfs:comment "Potential source gain (Kp). Typical value = 6,5." . a rdf:Property; ; rdfs:label "ki"@en; rdfs:domain ; ; ; rdfs:comment "Current source gain (Ki). Typical value = 0." . a rdf:Property; ; rdfs:label "kc"@en; rdfs:domain ; ; ; rdfs:comment "Exciter regulation factor (Kc). Typical value = 0,08." . a rdfs:Class; rdfs:label "ExcREXS"@en; rdfs:subClassOf ; rdfs:comment "General purpose rotating excitation system. This model can be used to represent a wide range of excitation systems whose DC power source is an AC or DC generator. It encompasses IEEE type AC1, AC2, DC1, and DC2 excitation system models. "; ; . a rdf:Property; ; rdfs:label "e1"@en; rdfs:domain ; ; ; rdfs:comment "Field voltage value 1 (E1). Typical value = 3." . a rdf:Property; ; rdfs:label "e2"@en; rdfs:domain ; ; ; rdfs:comment "Field voltage value 2 (E2). Typical value = 4." . a rdf:Property; ; rdfs:label "fbf"@en; rdfs:domain ; rdfs:range ; ; rdfs:comment "Rate feedback signal flag (fbf). Typical value = fieldCurrent." . a rdf:Property; ; rdfs:label "flimf"@en; rdfs:domain ; ; ; rdfs:comment "Limit type flag (Flimf). Typical value = 0." . a rdf:Property; ; rdfs:label "kc"@en; rdfs:domain ; ; ; rdfs:comment "Rectifier regulation factor (Kc). Typical value = 0,05." . a rdf:Property; ; rdfs:label "kd"@en; rdfs:domain ; ; ; rdfs:comment "Exciter regulation factor (Kd). Typical value = 2." . a rdf:Property; ; rdfs:label "ke"@en; rdfs:domain ; ; ; rdfs:comment "Exciter field proportional constant (Ke). Typical value = 1." . a rdf:Property; ; rdfs:label "kefd"@en; rdfs:domain ; ; ; rdfs:comment "Field voltage feedback gain (Kefd). Typical value = 0." . a rdf:Property; ; rdfs:label "kf"@en; rdfs:domain ; ; ; rdfs:comment "Rate feedback gain (Kf) (>= 0). Typical value = 0,05." . a rdf:Property; ; rdfs:label "kh"@en; rdfs:domain ; ; ; rdfs:comment "Field voltage controller feedback gain (Kh). Typical value = 0." . a rdf:Property; ; rdfs:label "kii"@en; rdfs:domain ; ; ; rdfs:comment "Field current regulator integral gain (Kii). Typical value = 0." . a rdf:Property; ; rdfs:label "kip"@en; rdfs:domain ; ; ; rdfs:comment "Field current regulator proportional gain (Kip). Typical value = 1." . a rdf:Property; ; rdfs:label "ks"@en; rdfs:domain ; ; ; rdfs:comment "Coefficient to allow different usage of the model-speed coefficient (Ks). Typical value = 0." . a rdf:Property; ; rdfs:label "kvi"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator integral gain (Kvi). Typical value = 0." . a rdf:Property; ; rdfs:label "kvp"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator proportional gain (Kvp). Typical value = 2800." . a rdf:Property; ; rdfs:label "kvphz"@en; rdfs:domain ; ; ; rdfs:comment "V/Hz limiter gain (Kvphz). Typical value = 0." . a rdf:Property; ; rdfs:label "nvphz"@en; rdfs:domain ; ; ; rdfs:comment "Pickup speed of V/Hz limiter (Nvphz). Typical value = 0." . a rdf:Property; ; rdfs:label "se1"@en; rdfs:domain ; ; ; rdfs:comment "Saturation factor at E1 (Se1). Typical value = 0,0001." . a rdf:Property; ; rdfs:label "se2"@en; rdfs:domain ; ; ; rdfs:comment "Saturation factor at E2 (Se2). Typical value = 0,001." . a rdf:Property; ; rdfs:label "ta"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator time constant (Ta) (>= 0). If = 0, block is bypassed. Typical value = 0,01." . a rdf:Property; ; rdfs:label "tb1"@en; rdfs:domain ; ; ; rdfs:comment "Lag time constant (Tb1) (>= 0). If = 0, block is bypassed. Typical value = 0." . a rdf:Property; ; rdfs:label "tb2"@en; rdfs:domain ; ; ; rdfs:comment "Lag time constant (Tb2) (>= 0). If = 0, block is bypassed. Typical value = 0." . a rdf:Property; ; rdfs:label "tc1"@en; rdfs:domain ; ; ; rdfs:comment "Lead time constant (Tc1) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "tc2"@en; rdfs:domain ; ; ; rdfs:comment "Lead time constant (Tc2) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "te"@en; rdfs:domain ; ; ; rdfs:comment "Exciter field time constant (Te) (> 0). Typical value = 1,2." . a rdf:Property; ; rdfs:label "tf"@en; rdfs:domain ; ; ; rdfs:comment "Rate feedback time constant (Tf) (>= 0). If = 0, the feedback path is not used. Typical value = 1." . a rdf:Property; ; rdfs:label "tf1"@en; rdfs:domain ; ; ; rdfs:comment "Feedback lead time constant (Tf1) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "tf2"@en; rdfs:domain ; ; ; rdfs:comment "Feedback lag time constant (Tf2) (>= 0). If = 0, block is bypassed. Typical value = 0." . a rdf:Property; ; rdfs:label "tp"@en; rdfs:domain ; ; ; rdfs:comment "Field current bridge time constant (Tp) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "vcmax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum compounding voltage (Vcmax). Typical value = 0." . a rdf:Property; ; rdfs:label "vfmax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum exciter field current (Vfmax) (> ExcREXS.vfmin). Typical value = 47." . a rdf:Property; ; rdfs:label "vfmin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum exciter field current (Vfmin) (< ExcREXS.vfmax). Typical value = -20." . a rdf:Property; ; rdfs:label "vimax"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator input limit (Vimax). Typical value = 0,1." . a rdf:Property; ; rdfs:label "vrmax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum controller output (Vrmax) (> ExcREXS.vrmin). Typical value = 47." . a rdf:Property; ; rdfs:label "vrmin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum controller output (Vrmin) (< ExcREXS.vrmax). Typical value = -20." . a rdf:Property; ; rdfs:label "xc"@en; rdfs:domain ; ; ; rdfs:comment "Exciter compounding reactance (Xc). Typical value = 0." . a rdfs:Class; rdfs:label "ExcRQB"@en; rdfs:subClassOf ; rdfs:comment "Excitation system type RQB (four-loop regulator, r?gulateur quatre boucles, developed in France) primarily used in nuclear or thermal generating units. This excitation system shall be always used together with power system stabilizer type PssRQB. "; ; . a rdf:Property; ; rdfs:label "ki0"@en; rdfs:domain ; ; ; rdfs:comment "Voltage reference input gain (Ki0). Typical value = 12,7." . a rdf:Property; ; rdfs:label "ki1"@en; rdfs:domain ; ; ; rdfs:comment "Voltage input gain (Ki1). Typical value = -16,8." . a rdf:Property; ; rdfs:label "te"@en; rdfs:domain ; ; ; rdfs:comment "Lead lag time constant (TE) (>= 0). Typical value = 0,22." . a rdf:Property; ; rdfs:label "tc"@en; rdfs:domain ; ; ; rdfs:comment "Lead lag time constant (TC) (>= 0). Typical value = 0,02." . a rdf:Property; ; rdfs:label "klir"@en; rdfs:domain ; ; ; rdfs:comment "OEL input gain (KLIR). Typical value = 12,13." . a rdf:Property; ; rdfs:label "ucmin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum voltage reference limit (UCMIN) (< ExcRQB.ucmax). Typical value = 0,9." . a rdf:Property; ; rdfs:label "ucmax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum voltage reference limit (UCMAX) (> ExcRQB.ucmin). Typical value = 1,1." . a rdf:Property; ; rdfs:label "lus"@en; rdfs:domain ; ; ; rdfs:comment "Setpoint (LUS). Typical value = 0,12." . a rdf:Property; ; rdfs:label "klus"@en; rdfs:domain ; ; ; rdfs:comment "Limiter gain (KLUS). Typical value = 50." . a rdf:Property; ; rdfs:label "mesu"@en; rdfs:domain ; ; ; rdfs:comment "Voltage input time constant (MESU) (>= 0). Typical value = 0,02." . a rdf:Property; ; rdfs:label "t4m"@en; rdfs:domain ; ; ; rdfs:comment "Input time constant (T4M) (>= 0). Typical value = 5." . a rdf:Property; ; rdfs:label "lsat"@en; rdfs:domain ; ; ; rdfs:comment "Integrator limiter (LSAT). Typical value = 5,73." . a rdf:Property; ; rdfs:label "tf"@en; rdfs:domain ; ; ; rdfs:comment "Exciter time constant (TF) (>= 0). Typical value = 0,01." . a rdfs:Class; rdfs:label "ExcSCRX"@en; rdfs:subClassOf ; rdfs:comment "Simple excitation system with generic characteristics typical of many excitation systems; intended for use where negative field current could be a problem."; ; . a rdf:Property; ; rdfs:label "tatb"@en; rdfs:domain ; ; ; rdfs:comment "Gain reduction ratio of lag-lead element ([Ta / Tb]). The parameter Ta is not defined explicitly. Typical value = 0.1." . a rdf:Property; ; rdfs:label "tb"@en; rdfs:domain ; ; ; rdfs:comment "Denominator time constant of lag-lead block (Tb) (>= 0). Typical value = 10." . a rdf:Property; ; rdfs:label "k"@en; rdfs:domain ; ; ; rdfs:comment "Gain (K) (> 0). Typical value = 200." . a rdf:Property; ; rdfs:label "te"@en; rdfs:domain ; ; ; rdfs:comment "Time constant of gain block (Te) (> 0). Typical value = 0,02." . a rdf:Property; ; rdfs:label "emin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum field voltage output (Emin) (< ExcSCRX.emax). Typical value = 0." . a rdf:Property; ; rdfs:label "emax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum field voltage output (Emax) (> ExcSCRX.emin). Typical value = 5." . a rdf:Property; ; rdfs:label "cswitch"@en; rdfs:domain ; ; ; rdfs:comment """Power source switch (Cswitch). true = fixed voltage of 1.0 PU false = generator terminal voltage.""" . a rdf:Property; ; rdfs:label "rcrfd"@en; rdfs:domain ; ; ; rdfs:comment "Ratio of field discharge resistance to field winding resistance ([rc / rfd]). Typical value = 0." . a rdfs:Class; rdfs:label "ExcSEXS"@en; rdfs:subClassOf ; rdfs:comment "Simplified excitation system."; ; . a rdf:Property; ; rdfs:label "tatb"@en; rdfs:domain ; ; ; rdfs:comment "Gain reduction ratio of lag-lead element ([Ta / Tb]). Typical value = 0,1." . a rdf:Property; ; rdfs:label "tb"@en; rdfs:domain ; ; ; rdfs:comment "Denominator time constant of lag-lead block (Tb) (>= 0). Typical value = 10." . a rdf:Property; ; rdfs:label "k"@en; rdfs:domain ; ; ; rdfs:comment "Gain (K) (> 0). Typical value = 100." . a rdf:Property; ; rdfs:label "te"@en; rdfs:domain ; ; ; rdfs:comment "Time constant of gain block (Te) (> 0). Typical value = 0,05." . a rdf:Property; ; rdfs:label "emin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum field voltage output (Emin) (< ExcSEXS.emax). Typical value = -5." . a rdf:Property; ; rdfs:label "emax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum field voltage output (Emax) (> ExcSEXS.emin). Typical value = 5." . a rdf:Property; ; rdfs:label "kc"@en; rdfs:domain ; ; ; rdfs:comment "PI controller gain (Kc) (> 0 if ExcSEXS.tc > 0). Typical value = 0,08." . a rdf:Property; ; rdfs:label "tc"@en; rdfs:domain ; ; ; rdfs:comment "PI controller phase lead time constant (Tc) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "efdmin"@en; rdfs:domain ; ; ; rdfs:comment "Field voltage clipping minimum limit (Efdmin) (< ExcSEXS.efdmax). Typical value = -5." . a rdf:Property; ; rdfs:label "efdmax"@en; rdfs:domain ; ; ; rdfs:comment "Field voltage clipping maximum limit (Efdmax) (> ExcSEXS.efdmin). Typical value = 5." . a rdfs:Class; rdfs:label "ExcSK"@en; rdfs:subClassOf ; rdfs:comment "Slovakian excitation system. UEL and secondary voltage control are included in this model. When this model is used, there cannot be a separate underexcitation limiter or VAr controller model."; ; . a rdf:Property; ; rdfs:label "efdmax"@en; rdfs:domain ; ; ; rdfs:comment "Field voltage clipping upper level limit (Efdmax) (> ExcSK.efdmin)." . a rdf:Property; ; rdfs:label "efdmin"@en; rdfs:domain ; ; ; rdfs:comment "Field voltage clipping lower level limit (Efdmin) (< ExcSK.efdmax)." . a rdf:Property; ; rdfs:label "emax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum field voltage output (Emax) (> ExcSK.emin). Typical value = 20." . a rdf:Property; ; rdfs:label "emin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum field voltage output (Emin) (< ExcSK.emax). Typical value = -20." . a rdf:Property; ; rdfs:label "k"@en; rdfs:domain ; ; ; rdfs:comment "Gain (K). Typical value = 1." . a rdf:Property; ; rdfs:label "k1"@en; rdfs:domain ; ; ; rdfs:comment "Parameter of underexcitation limit (K1). Typical value = 0,1364." . a rdf:Property; ; rdfs:label "k2"@en; rdfs:domain ; ; ; rdfs:comment "Parameter of underexcitation limit (K2). Typical value = -0,3861." . a rdf:Property; ; rdfs:label "kc"@en; rdfs:domain ; ; ; rdfs:comment "PI controller gain (Kc). Typical value = 70." . a rdf:Property; ; rdfs:label "kce"@en; rdfs:domain ; ; ; rdfs:comment "Rectifier regulation factor (Kce). Typical value = 0." . a rdf:Property; ; rdfs:label "kd"@en; rdfs:domain ; ; ; rdfs:comment "Exciter internal reactance (Kd). Typical value = 0." . a rdf:Property; ; rdfs:label "kgob"@en; rdfs:domain ; ; ; rdfs:comment "P controller gain (Kgob). Typical value = 10." . a rdf:Property; ; rdfs:label "kp"@en; rdfs:domain ; ; ; rdfs:comment "PI controller gain (Kp). Typical value = 1." . a rdf:Property; ; rdfs:label "kqi"@en; rdfs:domain ; ; ; rdfs:comment "PI controller gain of integral component (Kqi). Typical value = 0." . a rdf:Property; ; rdfs:label "kqob"@en; rdfs:domain ; ; ; rdfs:comment "Rate of rise of the reactive power (Kqob). " . a rdf:Property; ; rdfs:label "kqp"@en; rdfs:domain ; ; ; rdfs:comment "PI controller gain (Kqp). Typical value = 0." . a rdf:Property; ; rdfs:label "nq"@en; rdfs:domain ; ; ; rdfs:comment "Deadband of reactive power (nq). Determines the range of sensitivity. Typical value = 0,001." . a rdf:Property; ; rdfs:label "qconoff"@en; rdfs:domain ; ; ; rdfs:comment """Secondary voltage control state (Qc_on_off). true = secondary voltage control is on false = secondary voltage control is off. Typical value = false.""" . a rdf:Property; ; rdfs:label "qz"@en; rdfs:domain ; ; ; rdfs:comment "Desired value (setpoint) of reactive power, manual setting (Qz). " . a rdf:Property; ; rdfs:label "remote"@en; rdfs:domain ; ; ; rdfs:comment """Selector to apply automatic calculation in secondary controller model (remote). true = automatic calculation is activated false = manual set is active; the use of desired value of reactive power (Qz) is required. Typical value = true.""" . a rdf:Property; ; rdfs:label "sbase"@en; rdfs:domain ; ; ; rdfs:comment "Apparent power of the unit (Sbase) (> 0). Unit = MVA. Typical value = 259." . a rdf:Property; ; rdfs:label "tc"@en; rdfs:domain ; ; ; rdfs:comment "PI controller phase lead time constant (Tc) (>= 0). Typical value = 8." . ; rdfs:label "te"@en; a rdf:Property; rdfs:domain ; ; ; rdfs:comment "Time constant of gain block (Te) (>= 0). Typical value = 0,1." . a rdf:Property; ; rdfs:label "ti"@en; rdfs:domain ; ; ; rdfs:comment "PI controller phase lead time constant (Ti) (>= 0). Typical value = 2." . a rdf:Property; ; rdfs:label "tp"@en; rdfs:domain ; ; ; rdfs:comment "Time constant (Tp) (>= 0). Typical value = 0,1." . a rdf:Property; ; rdfs:label "tr"@en; rdfs:domain ; ; ; rdfs:comment "Voltage transducer time constant (Tr) (>= 0). Typical value = 0,01." . a rdf:Property; ; rdfs:label "uimax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum error (UImax) (> ExcSK.uimin). Typical value = 10." . a rdf:Property; ; rdfs:label "uimin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum error (UImin) (< ExcSK.uimax). Typical value = -10." . a rdf:Property; ; rdfs:label "urmax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum controller output (URmax) (> ExcSK.urmin). Typical value = 10." . a rdf:Property; ; rdfs:label "urmin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum controller output (URmin) (< ExcSK.urmax). Typical value = -10." . a rdf:Property; ; rdfs:label "vtmax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum terminal voltage input (Vtmax) (> ExcSK.vtmin). Determines the range of voltage deadband. Typical value = 1,05." . a rdf:Property; ; rdfs:label "vtmin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum terminal voltage input (Vtmin) (< ExcSK.vtmax). Determines the range of voltage deadband. Typical value = 0,95." . a rdf:Property; ; rdfs:label "yp"@en; rdfs:domain ; ; ; rdfs:comment "Maximum output (Yp). Typical value = 1." . a rdfs:Class; rdfs:label "ExcST1A"@en; rdfs:subClassOf ; rdfs:comment "Modification of an old IEEE ST1A static excitation system without overexcitation limiter (OEL) and underexcitation limiter (UEL)."; ; . a rdf:Property; ; rdfs:label "vimax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum voltage regulator input limit (Vimax) (> 0). Typical value = 999." . a rdf:Property; ; rdfs:label "vimin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum voltage regulator input limit (Vimin) (< 0). Typical value = -999." . a rdf:Property; ; rdfs:label "tc"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator time constant (Tc) (>= 0). Typical value = 1." . a rdf:Property; ; rdfs:label "tb"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator time constant (Tb) (>= 0). Typical value = 10." . a rdf:Property; ; rdfs:label "ka"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator gain (Ka) (> 0). Typical value = 190." . a rdf:Property; ; rdfs:label "ta"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator time constant (Ta) (>= 0). Typical value = 0,02." . a rdf:Property; ; rdfs:label "vrmax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum voltage regulator outputs (Vrmax) (> 0) . Typical value = 7,8." . a rdf:Property; ; rdfs:label "vrmin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum voltage regulator outputs (Vrmin) (< 0). Typical value = -6,7." . a rdf:Property; ; rdfs:label "kc"@en; rdfs:domain ; ; ; rdfs:comment "Rectifier loading factor proportional to commutating reactance (Kc) (>= 0). Typical value = 0,05." . a rdf:Property; ; rdfs:label "kf"@en; rdfs:domain ; ; ; rdfs:comment "Excitation control system stabilizer gains (Kf) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "tf"@en; rdfs:domain ; ; ; rdfs:comment "Excitation control system stabilizer time constant (Tf) (>= 0). Typical value = 1." . a rdf:Property; ; rdfs:label "tc1"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator time constant (Tc1) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "tb1"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator time constant (Tb1) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "vamax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum voltage regulator output (Vamax) (> 0). Typical value = 999." . a rdf:Property; ; rdfs:label "vamin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum voltage regulator output (Vamin) (< 0). Typical value = -999." . a rdf:Property; ; rdfs:label "ilr"@en; rdfs:domain ; ; ; rdfs:comment "Exciter output current limit reference (Ilr). Typical value = 0." . a rdf:Property; ; rdfs:label "klr"@en; rdfs:domain ; ; ; rdfs:comment "Exciter output current limiter gain (Klr). Typical value = 0." . a rdf:Property; ; rdfs:label "xe"@en; rdfs:domain ; ; ; rdfs:comment "Excitation xfmr effective reactance (Xe). Typical value = 0,04." . a rdfs:Class; rdfs:label "ExcST2A"@en; rdfs:subClassOf ; rdfs:comment "Modified IEEE ST2A static excitation system with another lead-lag block added to match the model defined by WECC."; ; . a rdf:Property; ; rdfs:label "ka"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator gain (Ka) (> 0). Typical value = 120." . a rdf:Property; ; rdfs:label "ta"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator time constant (Ta) (> 0). Typical value = 0,15." . a rdf:Property; ; rdfs:label "vrmax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum voltage regulator outputs (Vrmax) (> 0). Typical value = 1." . a rdf:Property; ; rdfs:label "vrmin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum voltage regulator outputs (Vrmin) (< 0). Typical value = -1." . a rdf:Property; ; rdfs:label "ke"@en; rdfs:domain ; ; ; rdfs:comment "Exciter constant related to self-excited field (Ke). Typical value = 1." . a rdf:Property; ; rdfs:label "te"@en; rdfs:domain ; ; ; rdfs:comment "Exciter time constant, integration rate associated with exciter control (Te) (> 0). Typical value = 0,5." . a rdf:Property; ; rdfs:label "kf"@en; rdfs:domain ; ; ; rdfs:comment "Excitation control system stabilizer gains (kf) (>= 0). Typical value = 0,05." . a rdf:Property; ; rdfs:label "tf"@en; rdfs:domain ; ; ; rdfs:comment "Excitation control system stabilizer time constant (Tf) (>= 0). Typical value = 0,7." . a rdf:Property; ; rdfs:label "kp"@en; rdfs:domain ; ; ; rdfs:comment "Potential circuit gain coefficient (Kp) (>= 0). Typical value = 4,88." . a rdf:Property; ; rdfs:label "ki"@en; rdfs:domain ; ; ; rdfs:comment "Potential circuit gain coefficient (Ki) (>= 0). Typical value = 8." . a rdf:Property; ; rdfs:label "kc"@en; rdfs:domain ; ; ; rdfs:comment "Rectifier loading factor proportional to commutating reactance (Kc) (>= 0). Typical value = 1,82." . a rdf:Property; ; rdfs:label "efdmax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum field voltage (Efdmax) (>= 0). Typical value = 99." . a rdf:Property; ; rdfs:label "uelin"@en; rdfs:domain ; ; ; rdfs:comment """UEL input (UELin). true = HV gate false = add to error signal. Typical value = false.""" . a rdf:Property; ; rdfs:label "tb"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator time constant (Tb) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "tc"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator time constant (Tc) (>= 0). Typical value = 0." . a rdfs:Class; rdfs:label "ExcST3A"@en; rdfs:subClassOf ; rdfs:comment "Modified IEEE ST3A static excitation system with added speed multiplier."; ; . a rdf:Property; ; rdfs:label "vimax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum voltage regulator input limit (Vimax) (> 0). Typical value = 0,2." . a rdf:Property; ; rdfs:label "vimin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum voltage regulator input limit (Vimin) (< 0). Typical value = -0,2." . a rdf:Property; ; rdfs:label "kj"@en; rdfs:domain ; ; ; rdfs:comment "AVR gain (Kj) (> 0). Typical value = 200." . a rdf:Property; ; rdfs:label "tb"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator time constant (Tb) (>= 0). Typical value = 6,67." . a rdf:Property; ; rdfs:label "tc"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator time constant (Tc) (>= 0). Typical value = 1." . a rdf:Property; ; rdfs:label "efdmax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum AVR output (Efdmax) (>= 0). Typical value = 6,9." . a rdf:Property; ; rdfs:label "km"@en; rdfs:domain ; ; ; rdfs:comment "Forward gain constant of the inner loop field regulator (Km) (> 0). Typical value = 7,04." . a rdf:Property; ; rdfs:label "tm"@en; rdfs:domain ; ; ; rdfs:comment "Forward time constant of inner loop field regulator (Tm) (> 0). Typical value = 1." . a rdf:Property; ; rdfs:label "vrmax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum voltage regulator output (Vrmax) (> 0). Typical value = 1." . a rdf:Property; ; rdfs:label "vrmin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum voltage regulator output (Vrmin) (< 0). Typical value = -1." . a rdf:Property; ; rdfs:label "kg"@en; rdfs:domain ; ; ; rdfs:comment "Feedback gain constant of the inner loop field regulator (Kg) (>= 0). Typical value = 1." . a rdf:Property; ; rdfs:label "kp"@en; rdfs:domain ; ; ; rdfs:comment "Potential source gain (Kp) (> 0). Typical value = 4,37." . a rdf:Property; ; rdfs:label "thetap"@en; rdfs:domain ; ; ; rdfs:comment "Potential circuit phase angle (thetap). Typical value = 20." . a rdf:Property; ; rdfs:label "ki"@en; rdfs:domain ; ; ; rdfs:comment "Potential circuit gain coefficient (Ki) (>= 0). Typical value = 4,83." . a rdf:Property; ; rdfs:label "kc"@en; rdfs:domain ; ; ; rdfs:comment "Rectifier loading factor proportional to commutating reactance (Kc) (>= 0). Typical value = 1,1." . a rdf:Property; ; rdfs:label "xl"@en; rdfs:domain ; ; ; rdfs:comment "Reactance associated with potential source (Xl) (>= 0). Typical value = 0,09." . a rdf:Property; ; rdfs:label "vbmax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum excitation voltage (Vbmax) (> 0). Typical value = 8,63." . a rdf:Property; ; rdfs:label "vgmax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum inner loop feedback voltage (Vgmax) (>= 0). Typical value = 6,53." . a rdf:Property; ; rdfs:label "ks"@en; rdfs:domain ; ; ; rdfs:comment "Coefficient to allow different usage of the model-speed coefficient (Ks). Typical value = 0." . a rdf:Property; ; rdfs:label "ks1"@en; rdfs:domain ; ; ; rdfs:comment "Coefficient to allow different usage of the model-speed coefficient (Ks1). Typical value = 0." . a rdfs:Class; rdfs:label "ExcST4B"@en; rdfs:subClassOf ; rdfs:comment "Modified IEEE ST4B static excitation system with maximum inner loop feedback gain Vgmax."; ; . a rdf:Property; ; rdfs:label "kpr"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator proportional gain (Kpr). Typical value = 10,75." . a rdf:Property; ; rdfs:label "kir"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator integral gain (Kir). Typical value = 10,75." . a rdf:Property; ; rdfs:label "ta"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator time constant (Ta) (>= 0). Typical value = 0,02." . a rdf:Property; ; rdfs:label "vrmax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum voltage regulator output (Vrmax) (> 0). Typical value = 1." . a rdf:Property; ; rdfs:label "vrmin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum voltage regulator output (Vrmin) (< 0). Typical value = -0,87." . a rdf:Property; ; rdfs:label "kpm"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator proportional gain output (Kpm). Typical value = 1." . a rdf:Property; ; rdfs:label "kim"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator integral gain output (Kim). Typical value = 0." . a rdf:Property; ; rdfs:label "vmmax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum inner loop output (Vmmax) (> ExcST4B.vmmin). Typical value = 99." . a rdf:Property; ; rdfs:label "vmmin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum inner loop output (Vmmin) (< ExcST4B.vmmax). Typical value = -99." . a rdf:Property; ; rdfs:label "kg"@en; rdfs:domain ; ; ; rdfs:comment "Feedback gain constant of the inner loop field regulator (Kg) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "kp"@en; rdfs:domain ; ; ; rdfs:comment "Potential circuit gain coefficient (Kp) (> 0). Typical value = 9,3." . a rdf:Property; ; rdfs:label "thetap"@en; rdfs:domain ; ; ; rdfs:comment "Potential circuit phase angle (thetap). Typical value = 0." . a rdf:Property; ; rdfs:label "ki"@en; rdfs:domain ; ; ; rdfs:comment "Potential circuit gain coefficient (Ki) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "kc"@en; rdfs:domain ; ; ; rdfs:comment "Rectifier loading factor proportional to commutating reactance (Kc) (>= 0). Typical value = 0,113." . a rdf:Property; ; rdfs:label "xl"@en; rdfs:domain ; ; ; rdfs:comment "Reactance associated with potential source (Xl) (>= 0). Typical value = 0,124." . a rdf:Property; ; rdfs:label "vbmax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum excitation voltage (Vbmax) (> 0). Typical value = 11,63." . a rdf:Property; ; rdfs:label "vgmax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum inner loop feedback voltage (Vgmax) (>= 0). Typical value = 5,8." . a rdf:Property; ; rdfs:label "uel"@en; rdfs:domain ; ; ; rdfs:comment """Selector (UEL). true = UEL is part of block diagram false = UEL is not part of block diagram. Typical value = false.""" . a rdf:Property; ; rdfs:label "lvgate"@en; rdfs:domain ; ; ; rdfs:comment """Selector (LVGate). true = LVGate is part of the block diagram false = LVGate is not part of the block diagram. Typical value = false.""" . a rdfs:Class; rdfs:label "ExcST6B"@en; rdfs:subClassOf ; rdfs:comment "Modified IEEE ST6B static excitation system with PID controller and optional inner feedback loop."; ; . a rdf:Property; ; rdfs:label "ilr"@en; rdfs:domain ; ; ; rdfs:comment "Exciter output current limit reference (Ilr) (> 0). Typical value = 4,164." . a rdf:Property; ; rdfs:label "k1"@en; rdfs:domain ; ; ; rdfs:comment """Selector (K1). true = feedback is from Ifd false = feedback is not from Ifd. Typical value = true.""" . a rdf:Property; ; rdfs:label "kcl"@en; rdfs:domain ; ; ; rdfs:comment "Exciter output current limit adjustment (Kcl) (> 0). Typical value = 1,0577." . a rdf:Property; ; rdfs:label "kff"@en; rdfs:domain ; ; ; rdfs:comment "Pre-control gain constant of the inner loop field regulator (Kff). Typical value = 1." . a rdf:Property; ; rdfs:label "kg"@en; rdfs:domain ; ; ; rdfs:comment "Feedback gain constant of the inner loop field regulator (Kg) (>= 0). Typical value = 1." . a rdf:Property; ; rdfs:label "kia"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator integral gain (Kia) (> 0). Typical value = 45,094." . a rdf:Property; ; rdfs:label "klr"@en; rdfs:domain ; ; ; rdfs:comment "Exciter output current limit adjustment (Kcl) (> 0). Typical value = 17,33." . a rdf:Property; ; rdfs:label "km"@en; rdfs:domain ; ; ; rdfs:comment "Forward gain constant of the inner loop field regulator (Km). Typical value = 1." . a rdf:Property; ; rdfs:label "kpa"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator proportional gain (Kpa) (> 0). Typical value = 18,038." . a rdf:Property; ; rdfs:label "kvd"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator derivative gain (Kvd). Typical value = 0." . a rdf:Property; ; rdfs:label "oelin"@en; rdfs:domain ; rdfs:range ; ; rdfs:comment "OEL input selector (OELin). Typical value = noOELinput (corresponds to OELin = 0 on diagram)." . a rdf:Property; ; rdfs:label "tg"@en; rdfs:domain ; ; ; rdfs:comment "Feedback time constant of inner loop field voltage regulator (Tg) (>= 0). Typical value = 0,02." . a rdf:Property; ; rdfs:label "ts"@en; rdfs:domain ; ; ; rdfs:comment "Rectifier firing time constant (Ts) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "tvd"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator derivative gain (Tvd) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "vamax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum voltage regulator output (Vamax) (> 0). Typical value = 4,81." . a rdf:Property; ; rdfs:label "vamin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum voltage regulator output (Vamin) (< 0). Typical value = -3,85." . a rdf:Property; ; rdfs:label "vilim"@en; rdfs:domain ; ; ; rdfs:comment """Selector (Vilim). true = Vimin-Vimax limiter is active false = Vimin-Vimax limiter is not active. Typical value = true.""" . a rdf:Property; ; rdfs:label "vimax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum voltage regulator input limit (Vimax) (> ExcST6B.vimin). Typical value = 10." . a rdf:Property; ; rdfs:label "vimin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum voltage regulator input limit (Vimin) (< ExcST6B.vimax). Typical value = -10." . a rdf:Property; ; rdfs:label "vmult"@en; rdfs:domain ; ; ; rdfs:comment """Selector (vmult). true = multiply regulator output by terminal voltage false = do not multiply regulator output by terminal voltage. Typical value = true.""" . a rdf:Property; ; rdfs:label "vrmax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum voltage regulator output (Vrmax) (> 0). Typical value = 4,81." . a rdf:Property; ; rdfs:label "vrmin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum voltage regulator output (Vrmin) (< 0). Typical value = -3,85." . a rdf:Property; ; rdfs:label "xc"@en; rdfs:domain ; ; ; rdfs:comment "Excitation source reactance (Xc). Typical value = 0,05." . a rdfs:Class; rdfs:label "ExcST7B"@en; rdfs:subClassOf ; rdfs:comment "Modified IEEE ST7B static excitation system without stator current limiter (SCL) and current compensator (DROOP) inputs."; ; . a rdf:Property; ; rdfs:label "kh"@en; rdfs:domain ; ; ; rdfs:comment "High-value gate feedback gain (Kh) (>= 0). Typical value = 1." . a rdf:Property; ; rdfs:label "kia"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator integral gain (Kia) (>= 0). Typical value = 1." . a rdf:Property; ; rdfs:label "kl"@en; rdfs:domain ; ; ; rdfs:comment "Low-value gate feedback gain (Kl) (>= 0). Typical value = 1." . a rdf:Property; ; rdfs:label "kpa"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator proportional gain (Kpa) (> 0). Typical value = 40." . a rdf:Property; ; rdfs:label "oelin"@en; rdfs:domain ; rdfs:range ; ; rdfs:comment "OEL input selector (OELin). Typical value = noOELinput." . a rdf:Property; ; rdfs:label "tb"@en; rdfs:domain ; ; ; rdfs:comment "Regulator lag time constant (Tb) (>= 0). Typical value = 1." . a rdf:Property; ; rdfs:label "tc"@en; rdfs:domain ; ; ; rdfs:comment "Regulator lead time constant (Tc) (>= 0). Typical value = 1." . a rdf:Property; ; rdfs:label "tf"@en; rdfs:domain ; ; ; rdfs:comment "Excitation control system stabilizer time constant (Tf) (>= 0). Typical value = 1." . a rdf:Property; ; rdfs:label "tg"@en; rdfs:domain ; ; ; rdfs:comment "Feedback time constant of inner loop field voltage regulator (Tg) (>= 0). Typical value = 1." . a rdf:Property; ; rdfs:label "tia"@en; rdfs:domain ; ; ; rdfs:comment "Feedback time constant (Tia) (>= 0). Typical value = 3." . a rdf:Property; ; rdfs:label "ts"@en; rdfs:domain ; ; ; rdfs:comment "Rectifier firing time constant (Ts) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "uelin"@en; rdfs:domain ; rdfs:range ; ; rdfs:comment "UEL input selector (UELin). Typical value = noUELinput." . a rdf:Property; ; rdfs:label "vmax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum voltage reference signal (Vmax) (> 0 and > ExcST7B.vmin)). Typical value = 1,1." . a rdf:Property; ; rdfs:label "vmin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum voltage reference signal (Vmin) (> 0 and < ExcST7B.vmax). Typical value = 0,9." . a rdf:Property; ; rdfs:label "vrmax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum voltage regulator output (Vrmax) (> 0). Typical value = 5." . a rdf:Property; ; rdfs:label "vrmin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum voltage regulator output (Vrmin) (< 0). Typical value = -4,5." . a ; rdfs:label "OverexcitationLimiterDynamics"@en; rdfs:comment "Overexcitation limiters (OELs) are also referred to as maximum excitation limiters and field current limiters. The possibility of voltage collapse in stressed power systems increases the importance of modelling these limiters in studies of system conditions that cause machines to operate at high levels of excitation for a sustained period, such as voltage collapse or system-islanding. Such events typically occur over a long time frame compared with transient or small-signal stability simulations." . a rdfs:Class; rdfs:label "OverexcitationLimiterDynamics"@en; rdfs:subClassOf ; rdfs:comment "Overexcitation limiter function block whose behaviour is described by reference to a standard model or by definition of a user-defined model."; . a rdfs:Class; rdfs:label "OverexcLimIEEE"@en; rdfs:subClassOf ; rdfs:comment """The over excitation limiter model is intended to represent the significant features of OELs necessary for some large-scale system studies. It is the result of a pragmatic approach to obtain a model that can be widely applied with attainable data from generator owners. An attempt to include all variations in the functionality of OELs and duplicate how they interact with the rest of the excitation systems would likely result in a level of application insufficient for the studies for which they are intended. Reference: IEEE OEL 421.5-2005, 9. """; ; . a rdf:Property; ; rdfs:label "itfpu"@en; rdfs:domain ; ; ; rdfs:comment "OEL timed field current limiter pickup level (ITFPU). Typical value = 1,05." . a rdf:Property; ; rdfs:label "ifdmax"@en; rdfs:domain ; ; ; rdfs:comment "OEL instantaneous field current limit (IFDMAX). Typical value = 1,5." . a rdf:Property; ; rdfs:label "ifdlim"@en; rdfs:domain ; ; ; rdfs:comment "OEL timed field current limit (IFDLIM). Typical value = 1,05." . a rdf:Property; ; rdfs:label "hyst"@en; rdfs:domain ; ; ; rdfs:comment "OEL pickup/drop-out hysteresis (HYST). Typical value = 0,03." . a rdf:Property; ; rdfs:label "kcd"@en; rdfs:domain ; ; ; rdfs:comment "OEL cooldown gain (KCD). Typical value = 1." . a rdf:Property; ; rdfs:label "kramp"@en; rdfs:domain ; ; ; rdfs:comment "OEL ramped limit rate (KRAMP). Unit = PU / s. Typical value = 10." . a rdfs:Class; rdfs:label "OverexcLim2"@en; rdfs:subClassOf ; rdfs:comment """Different from LimIEEEOEL, LimOEL2 has a fixed pickup threshold and reduces the excitation set-point by means of a non-windup integral regulator. Irated is the rated machine excitation current (calculated from nameplate conditions: Vnom, Pnom, CosPhinom)."""; ; . a rdf:Property; ; rdfs:label "koi"@en; rdfs:domain ; ; ; rdfs:comment "Gain Over excitation limiter (KOI). Typical value = 0,1." . a rdf:Property; ; rdfs:label "voimax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum error signal (VOIMAX) (> OverexcLim2.voimin). Typical value = 0." . a rdf:Property; ; rdfs:label "voimin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum error signal (VOIMIN) (< OverexcLim2.voimax). Typical value = -9999." . a rdf:Property; ; rdfs:label "ifdlim"@en; rdfs:domain ; ; ; rdfs:comment "Limit value of rated field current (IFDLIM). Typical value = 1,05." . a rdfs:Class; rdfs:label "OverexcLimX1"@en; rdfs:subClassOf ; rdfs:comment "Field voltage over excitation limiter."; ; . a rdf:Property; ; rdfs:label "efdrated"@en; rdfs:domain ; ; ; rdfs:comment "Rated field voltage (EFDRATED). Typical value = 1,05." . a rdf:Property; ; rdfs:label "efd1"@en; rdfs:domain ; ; ; rdfs:comment "Low voltage point on the inverse time characteristic (EFD1). Typical value = 1,1." . ; rdfs:label "t1"@en; a rdf:Property; rdfs:domain ; ; ; rdfs:comment "Time to trip the exciter at the low voltage point on the inverse time characteristic (TIME1) (>= 0). Typical value = 120." . a rdf:Property; ; rdfs:label "efd2"@en; rdfs:domain ; ; ; rdfs:comment "Mid voltage point on the inverse time characteristic (EFD2). Typical value = 1,2." . a rdf:Property; ; rdfs:label "t2"@en; rdfs:domain ; ; ; rdfs:comment "Time to trip the exciter at the mid voltage point on the inverse time characteristic (TIME2) (>= 0). Typical value = 40." . a rdf:Property; ; rdfs:label "efd3"@en; rdfs:domain ; ; ; rdfs:comment "High voltage point on the inverse time characteristic (EFD3). Typical value = 1,5." . a rdf:Property; ; rdfs:label "t3"@en; rdfs:domain ; ; ; rdfs:comment "Time to trip the exciter at the high voltage point on the inverse time characteristic (TIME3) (>= 0). Typical value = 15." . a rdf:Property; ; rdfs:label "efddes"@en; rdfs:domain ; ; ; rdfs:comment "Desired field voltage (EFDDES). Typical value = 0,9." . a rdf:Property; ; rdfs:label "kmx"@en; rdfs:domain ; ; ; rdfs:comment "Gain (KMX). Typical value = 0,01." . a rdf:Property; ; rdfs:label "vlow"@en; rdfs:domain ; ; ; rdfs:comment "Low voltage limit (VLOW) (> 0)." . a rdfs:Class; rdfs:label "OverexcLimX2"@en; rdfs:subClassOf ; rdfs:comment "Field voltage or current overexcitation limiter designed to protect the generator field of an AC machine with automatic excitation control from overheating due to prolonged overexcitation."; ; . a rdf:Property; ; rdfs:label "m"@en; rdfs:domain ; ; ; rdfs:comment """(m). true = IFD limiting false = EFD limiting.""" . a rdf:Property; ; rdfs:label "efdrated"@en; rdfs:domain ; ; ; rdfs:comment "Rated field voltage if m = false or rated field current if m = true (EFDRATED). Typical value = 1,05." . a rdf:Property; ; rdfs:label "efd1"@en; rdfs:domain ; ; ; rdfs:comment "Low voltage or current point on the inverse time characteristic (EFD1). Typical value = 1,1." . a rdf:Property; ; rdfs:label "t1"@en; rdfs:domain ; ; ; rdfs:comment "Time to trip the exciter at the low voltage or current point on the inverse time characteristic (TIME1) (>= 0). Typical value = 120." . a rdf:Property; ; rdfs:label "efd2"@en; rdfs:domain ; ; ; rdfs:comment "Mid voltage or current point on the inverse time characteristic (EFD2). Typical value = 1,2." . a rdf:Property; ; rdfs:label "t2"@en; rdfs:domain ; ; ; rdfs:comment "Time to trip the exciter at the mid voltage or current point on the inverse time characteristic (TIME2) (>= 0). Typical value = 40." . a rdf:Property; ; rdfs:label "efd3"@en; rdfs:domain ; ; ; rdfs:comment "High voltage or current point on the inverse time characteristic (EFD3). Typical value = 1,5." . a rdf:Property; ; rdfs:label "t3"@en; rdfs:domain ; ; ; rdfs:comment "Time to trip the exciter at the high voltage or current point on the inverse time characteristic (TIME3) (>= 0). Typical value = 15." . a rdf:Property; ; rdfs:label "efddes"@en; rdfs:domain ; ; ; rdfs:comment "Desired field voltage if m = false or desired field current if m = true (EFDDES). Typical value = 1." . a rdf:Property; ; rdfs:label "kmx"@en; rdfs:domain ; ; ; rdfs:comment "Gain (KMX). Typical value = 0,002." . a rdf:Property; ; rdfs:label "vlow"@en; rdfs:domain ; ; ; rdfs:comment "Low voltage limit (VLOW) (> 0)." . a ; rdfs:label "UnderexcitationLimiterDynamics"@en; rdfs:comment "Underexcitation limiters (UELs) act to boost excitation. The UEL typically senses either a combination of voltage and current of the synchronous machine or a combination of real and reactive power. Some UELs utilize a temperature or pressure recalibration feature, in which the UEL characteristic is shifted depending upon the generator cooling gas temperature or pressure. " . a rdfs:Class; rdfs:label "UnderexcitationLimiterDynamics"@en; rdfs:subClassOf ; rdfs:comment "Underexcitation limiter function block whose behaviour is described by reference to a standard model or by definition of a user-defined model."; . a rdfs:Class; rdfs:label "UnderexcLimIEEE1"@en; rdfs:subClassOf ; rdfs:comment """Type UEL1 model which has a circular limit boundary when plotted in terms of machine reactive power vs. real power output. Reference: IEEE UEL1 421.5-2005, 10.1. """; ; . a rdf:Property; ; rdfs:label "kur"@en; rdfs:domain ; ; ; rdfs:comment "UEL radius setting (KUR). Typical value = 1,95." . a rdf:Property; ; rdfs:label "kuc"@en; rdfs:domain ; ; ; rdfs:comment "UEL centre setting (KUC). Typical value = 1,38." . a rdf:Property; ; rdfs:label "kuf"@en; rdfs:domain ; ; ; rdfs:comment "UEL excitation system stabilizer gain (KUF). Typical value = 3,3." . a rdf:Property; ; rdfs:label "vurmax"@en; rdfs:domain ; ; ; rdfs:comment "UEL maximum limit for radius phasor magnitude (VURMAX). Typical value = 5,8." . a rdf:Property; ; rdfs:label "vucmax"@en; rdfs:domain ; ; ; rdfs:comment "UEL maximum limit for operating point phasor magnitude (VUCMAX). Typical value = 5,8." . a rdf:Property; ; rdfs:label "kui"@en; rdfs:domain ; ; ; rdfs:comment "UEL integral gain (KUI). Typical value = 0." . a rdf:Property; ; rdfs:label "kul"@en; rdfs:domain ; ; ; rdfs:comment "UEL proportional gain (KUL). Typical value = 100." . a rdf:Property; ; rdfs:label "vuimax"@en; rdfs:domain ; ; ; rdfs:comment "UEL integrator output maximum limit (VUIMAX) (> UnderexcLimIEEE1.vuimin)." . a rdf:Property; ; rdfs:label "vuimin"@en; rdfs:domain ; ; ; rdfs:comment "UEL integrator output minimum limit (VUIMIN) (< UnderexcLimIEEE1.vuimax)." . a rdf:Property; ; rdfs:label "tu1"@en; rdfs:domain ; ; ; rdfs:comment "UEL lead time constant (TU1) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "tu2"@en; rdfs:domain ; ; ; rdfs:comment "UEL lag time constant (TU2) (>= 0). Typical value = 0,05." . a rdf:Property; ; rdfs:label "tu3"@en; rdfs:domain ; ; ; rdfs:comment "UEL lead time constant (TU3) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "tu4"@en; rdfs:domain ; ; ; rdfs:comment "UEL lag time constant (TU4) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "vulmax"@en; rdfs:domain ; ; ; rdfs:comment "UEL output maximum limit (VULMAX) (> UnderexcLimIEEE1.vulmin). Typical value = 18." . a rdf:Property; ; rdfs:label "vulmin"@en; rdfs:domain ; ; ; rdfs:comment "UEL output minimum limit (VULMIN) (< UnderexcLimIEEE1.vulmax). Typical value = -18." . a rdfs:Class; rdfs:label "UnderexcLimIEEE2"@en; rdfs:subClassOf ; rdfs:comment """Type UEL2 underexcitation limiter which has either a straight-line or multi-segment characteristic when plotted in terms of machine reactive power output vs. real power output. Reference: IEEE UEL2 421.5-2005, 10.2 (limit characteristic lookup table shown in Figure 10.4 (p 32))."""; ; . a rdf:Property; ; rdfs:label "tuv"@en; rdfs:domain ; ; ; rdfs:comment "Voltage filter time constant (TUV) (>= 0). Typical value = 5." . a rdf:Property; ; rdfs:label "tup"@en; rdfs:domain ; ; ; rdfs:comment "Real power filter time constant (TUP) (>= 0). Typical value = 5." . a rdf:Property; ; rdfs:label "tuq"@en; rdfs:domain ; ; ; rdfs:comment "Reactive power filter time constant (TUQ) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "kui"@en; rdfs:domain ; ; ; rdfs:comment "UEL integral gain (KUI). Typical value = 0,5." . a rdf:Property; ; rdfs:label "kul"@en; rdfs:domain ; ; ; rdfs:comment "UEL proportional gain (KUL). Typical value = 0,8." . a rdf:Property; ; rdfs:label "vuimax"@en; rdfs:domain ; ; ; rdfs:comment "UEL integrator output maximum limit (VUIMAX) (> UnderexcLimIEEE2.vuimin). Typical value = 0,25." . a rdf:Property; ; rdfs:label "vuimin"@en; rdfs:domain ; ; ; rdfs:comment "UEL integrator output minimum limit (VUIMIN) (< UnderexcLimIEEE2.vuimax). Typical value = 0." . a rdf:Property; ; rdfs:label "kuf"@en; rdfs:domain ; ; ; rdfs:comment "UEL excitation system stabilizer gain (KUF). Typical value = 0." . a rdf:Property; ; rdfs:label "kfb"@en; rdfs:domain ; ; ; rdfs:comment "Gain associated with optional integrator feedback input signal to UEL (KFB). Typical value = 0." . a rdf:Property; ; rdfs:label "tul"@en; rdfs:domain ; ; ; rdfs:comment "Time constant associated with optional integrator feedback input signal to UEL (TUL) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "tu1"@en; rdfs:domain ; ; ; rdfs:comment "UEL lead time constant (TU1) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "tu2"@en; rdfs:domain ; ; ; rdfs:comment "UEL lag time constant (TU2) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "tu3"@en; rdfs:domain ; ; ; rdfs:comment "UEL lead time constant (TU3) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "tu4"@en; rdfs:domain ; ; ; rdfs:comment "UEL lag time constant (TU4) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "vulmax"@en; rdfs:domain ; ; ; rdfs:comment "UEL output maximum limit (VULMAX) (> UnderexcLimIEEE2.vulmin). Typical value = 0,25." . a rdf:Property; ; rdfs:label "vulmin"@en; rdfs:domain ; ; ; rdfs:comment "UEL output minimum limit (VULMIN) (< UnderexcLimIEEE2.vulmax). Typical value = 0." . a rdf:Property; ; rdfs:label "p0"@en; rdfs:domain ; ; ; rdfs:comment "Real power values for endpoints (P0). Typical value = 0." . a rdf:Property; ; rdfs:label "q0"@en; rdfs:domain ; ; ; rdfs:comment "Reactive power values for endpoints (Q0). Typical value = -0,31." . a rdf:Property; ; rdfs:label "p1"@en; rdfs:domain ; ; ; rdfs:comment "Real power values for endpoints (P1). Typical value = 0,3." . a rdf:Property; ; rdfs:label "q1"@en; rdfs:domain ; ; ; rdfs:comment "Reactive power values for endpoints (Q1). Typical value = -0,31." . a rdf:Property; ; rdfs:label "p2"@en; rdfs:domain ; ; ; rdfs:comment "Real power values for endpoints (P2). Typical value = 0,6." . a rdf:Property; ; rdfs:label "q2"@en; rdfs:domain ; ; ; rdfs:comment "Reactive power values for endpoints (Q2). Typical value = -0,28." . a rdf:Property; ; rdfs:label "p3"@en; rdfs:domain ; ; ; rdfs:comment "Real power values for endpoints (P3). Typical value = 0,9." . a rdf:Property; ; rdfs:label "q3"@en; rdfs:domain ; ; ; rdfs:comment "Reactive power values for endpoints (Q3). Typical value = -0,21." . a rdf:Property; ; rdfs:label "p4"@en; rdfs:domain ; ; ; rdfs:comment "Real power values for endpoints (P4). Typical value = 1,02." . a rdf:Property; ; rdfs:label "q4"@en; rdfs:domain ; ; ; rdfs:comment "Reactive power values for endpoints (Q4). Typical value = 0." . a rdf:Property; ; rdfs:label "p5"@en; rdfs:domain ; ; ; rdfs:comment "Real power values for endpoints (P5). " . a rdf:Property; ; rdfs:label "q5"@en; rdfs:domain ; ; ; rdfs:comment "Reactive power values for endpoints (Q5). " . a rdf:Property; ; rdfs:label "p6"@en; rdfs:domain ; ; ; rdfs:comment "Real power values for endpoints (P6)." . a rdf:Property; ; rdfs:label "q6"@en; rdfs:domain ; ; ; rdfs:comment "Reactive power values for endpoints (Q6). " . a rdf:Property; ; rdfs:label "p7"@en; rdfs:domain ; ; ; rdfs:comment "Real power values for endpoints (P7). " . a rdf:Property; ; rdfs:label "q7"@en; rdfs:domain ; ; ; rdfs:comment "Reactive power values for endpoints (Q7). " . a rdf:Property; ; rdfs:label "p8"@en; rdfs:domain ; ; ; rdfs:comment "Real power values for endpoints (P8). " . a rdf:Property; ; rdfs:label "q8"@en; rdfs:domain ; ; ; rdfs:comment "Reactive power values for endpoints (Q8). " . a rdf:Property; ; rdfs:label "p9"@en; rdfs:domain ; ; ; rdfs:comment "Real power values for endpoints (P9). " . a rdf:Property; ; rdfs:label "q9"@en; rdfs:domain ; ; ; rdfs:comment "Reactive power values for endpoints (Q9). " . a rdf:Property; ; rdfs:label "p10"@en; rdfs:domain ; ; ; rdfs:comment "Real power values for endpoints (P10). " . a rdf:Property; ; rdfs:label "q10"@en; rdfs:domain ; ; ; rdfs:comment "Reactive power values for endpoints (Q10). " . a rdf:Property; ; rdfs:label "k1"@en; rdfs:domain ; ; ; rdfs:comment "UEL terminal voltage exponent applied to real power input to UEL limit look-up table (k1). Typical value = 2." . a rdf:Property; ; rdfs:label "k2"@en; rdfs:domain ; ; ; rdfs:comment "UEL terminal voltage exponent applied to reactive power output from UEL limit look-up table (k2). Typical value = 2." . a rdfs:Class; rdfs:label "UnderexcLim2Simplified"@en; rdfs:subClassOf ; rdfs:comment "Simplified type UEL2 underexcitation limiter. This model can be derived from UnderexcLimIEEE2. The limit characteristic (look –up table) is a single straight-line, the same as UnderexcLimIEEE2 (see Figure 10.4 (p 32), IEEE 421.5-2005 Section 10.2)."; ; . a rdf:Property; ; rdfs:label "q0"@en; rdfs:domain ; ; ; rdfs:comment "Segment Q initial point (Q0). Typical value = -0,31." . a rdf:Property; ; rdfs:label "q1"@en; rdfs:domain ; ; ; rdfs:comment "Segment Q end point (Q1). Typical value = -0,1." . a rdf:Property; ; rdfs:label "p0"@en; rdfs:domain ; ; ; rdfs:comment "Segment P initial point (P0). Typical value = 0." . a rdf:Property; ; rdfs:label "p1"@en; rdfs:domain ; ; ; rdfs:comment "Segment P end point (P1). Typical value = 1." . a rdf:Property; ; rdfs:label "kui"@en; rdfs:domain ; ; ; rdfs:comment "Gain Under excitation limiter (KUI). Typical value = 0,1." . a rdf:Property; ; rdfs:label "vuimin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum error signal (VUIMIN) (< UnderexcLim2Simplified.vuimax). Typical value = 0." . a rdf:Property; ; rdfs:label "vuimax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum error signal (VUIMAX) (> UnderexcLim2Simplified.vuimin). Typical value = 1." . a rdfs:Class; rdfs:label "UnderexcLimX1"@en; rdfs:subClassOf ; rdfs:comment "Allis-Chalmers minimum excitation limiter."; ; . a rdf:Property; ; rdfs:label "kf2"@en; rdfs:domain ; ; ; rdfs:comment "Differential gain (KF2)." . a rdf:Property; ; rdfs:label "tf2"@en; rdfs:domain ; ; ; rdfs:comment "Differential time constant (TF2) (>= 0)." . a rdf:Property; ; rdfs:label "km"@en; rdfs:domain ; ; ; rdfs:comment "Minimum excitation limit gain (KM)." . a rdf:Property; ; rdfs:label "tm"@en; rdfs:domain ; ; ; rdfs:comment "Minimum excitation limit time constant (TM) (>= 0)." . a rdf:Property; ; rdfs:label "melmax"@en; rdfs:domain ; ; ; rdfs:comment "Minimum excitation limit value (MELMAX)." . a rdf:Property; ; rdfs:label "k"@en; rdfs:domain ; ; ; rdfs:comment "Minimum excitation limit slope (K) (> 0)." . a rdfs:Class; rdfs:label "UnderexcLimX2"@en; rdfs:subClassOf ; rdfs:comment "Westinghouse minimum excitation limiter."; ; . a rdf:Property; ; rdfs:label "kf2"@en; rdfs:domain ; ; ; rdfs:comment "Differential gain (KF2)." . a rdf:Property; ; rdfs:label "tf2"@en; rdfs:domain ; ; ; rdfs:comment "Differential time constant (TF2) (>= 0)." . a rdf:Property; ; rdfs:label "km"@en; rdfs:domain ; ; ; rdfs:comment "Minimum excitation limit gain (KM)." . a rdf:Property; ; rdfs:label "tm"@en; rdfs:domain ; ; ; rdfs:comment "Minimum excitation limit time constant (TM) (>= 0)." . a rdf:Property; ; rdfs:label "melmax"@en; rdfs:domain ; ; ; rdfs:comment "Minimum excitation limit value (MELMAX)." . a rdf:Property; ; rdfs:label "qo"@en; rdfs:domain ; ; ; rdfs:comment "Excitation centre setting (QO)." . a rdf:Property; ; rdfs:label "r"@en; rdfs:domain ; ; ; rdfs:comment "Excitation radius (R)." . a ; rdfs:label "PowerSystemStabilizerDynamics"@en; rdfs:comment "The power system stabilizer (PSS) model provides an input (Vs) to the excitation system model to improve damping of system oscillations. A variety of input signals can be used depending on the particular design." . a rdfs:Class; rdfs:label "PowerSystemStabilizerDynamics"@en; rdfs:subClassOf ; rdfs:comment "Power system stabilizer function block whose behaviour is described by reference to a standard model or by definition of a user-defined model."; . a rdfs:Class; rdfs:label "PssIEEE1A"@en; rdfs:subClassOf ; rdfs:comment """IEEE 421.5-2005 type PSS1A power system stabilizer model. PSS1A is the generalized form of a PSS with a single input signal. Reference: IEEE 1A 421.5-2005, 8.1. """; ; . a rdf:Property; ; rdfs:label "inputSignalType"@en; rdfs:domain ; rdfs:range ; ; rdfs:comment "Type of input signal (rotorAngularFrequencyDeviation, generatorElectricalPower, or busFrequencyDeviation). Typical value = rotorAngularFrequencyDeviation." . a rdf:Property; ; rdfs:label "a1"@en; rdfs:domain ; ; ; rdfs:comment "PSS signal conditioning frequency filter constant (A1). Typical value = 0,061." . a rdf:Property; ; rdfs:label "a2"@en; rdfs:domain ; ; ; rdfs:comment "PSS signal conditioning frequency filter constant (A2). Typical value = 0,0017." . a rdf:Property; ; rdfs:label "t1"@en; rdfs:domain ; ; ; rdfs:comment "Lead/lag time constant (T1) (>= 0). Typical value = 0,3." . a rdf:Property; ; rdfs:label "t2"@en; rdfs:domain ; ; ; rdfs:comment "Lead/lag time constant (T2) (>= 0). Typical value = 0,03." . a rdf:Property; ; rdfs:label "t3"@en; rdfs:domain ; ; ; rdfs:comment "Lead/lag time constant (T3) (>= 0). Typical value = 0,3." . a rdf:Property; ; rdfs:label "t4"@en; rdfs:domain ; ; ; rdfs:comment "Lead/lag time constant (T4) (>= 0). Typical value = 0,03." . a rdf:Property; ; rdfs:label "t5"@en; rdfs:domain ; ; ; rdfs:comment "Washout time constant (T5) (>= 0). Typical value = 10." . a rdf:Property; ; rdfs:label "t6"@en; rdfs:domain ; ; ; rdfs:comment "Transducer time constant (T6) (>= 0). Typical value = 0,01." . a rdf:Property; ; rdfs:label "ks"@en; rdfs:domain ; ; ; rdfs:comment "Stabilizer gain (Ks). Typical value = 5." . a rdf:Property; ; rdfs:label "vrmax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum stabilizer output (Vrmax) (> PssIEEE1A.vrmin). Typical value = 0,05." . a rdf:Property; ; rdfs:label "vrmin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum stabilizer output (Vrmin) (< PssIEEE1A.vrmax). Typical value = -0,05." . a rdfs:Class; rdfs:label "PssIEEE2B"@en; rdfs:subClassOf ; rdfs:comment """IEEE 421.5-2005 type PSS2B power system stabilizer model. This stabilizer model is designed to represent a variety of dual-input stabilizers, which normally use combinations of power and speed or frequency to derive the stabilizing signal. Reference: IEEE 2B 421.5-2005, 8.2."""; ; . a rdf:Property; ; rdfs:label "inputSignal1Type"@en; rdfs:domain ; rdfs:range ; ; rdfs:comment "Type of input signal #1 (rotorAngularFrequencyDeviation, busFrequencyDeviation). Typical value = rotorAngularFrequencyDeviation." . a rdf:Property; ; rdfs:label "inputSignal2Type"@en; rdfs:domain ; rdfs:range ; ; rdfs:comment "Type of input signal #2 (generatorElectricalPower). Typical value = generatorElectricalPower." . a rdf:Property; ; rdfs:label "vsi1max"@en; rdfs:domain ; ; ; rdfs:comment "Input signal #1 maximum limit (Vsi1max) (> PssIEEE2B.vsi1min). Typical value = 2." . a rdf:Property; ; rdfs:label "vsi1min"@en; rdfs:domain ; ; ; rdfs:comment "Input signal #1 minimum limit (Vsi1min) (< PssIEEE2B.vsi1max). Typical value = -2." . a rdf:Property; ; rdfs:label "tw1"@en; rdfs:domain ; ; ; rdfs:comment "First washout on signal #1 (Tw1) (>= 0). Typical value = 2." . a rdf:Property; ; rdfs:label "tw2"@en; rdfs:domain ; ; ; rdfs:comment "Second washout on signal #1 (Tw2) (>= 0). Typical value = 2." . a rdf:Property; ; rdfs:label "vsi2max"@en; rdfs:domain ; ; ; rdfs:comment "Input signal #2 maximum limit (Vsi2max) (> PssIEEE2B.vsi2min). Typical value = 2." . a rdf:Property; ; rdfs:label "vsi2min"@en; rdfs:domain ; ; ; rdfs:comment "Input signal #2 minimum limit (Vsi2min) (< PssIEEE2B.vsi2max). Typical value = -2." . a rdf:Property; ; rdfs:label "tw3"@en; rdfs:domain ; ; ; rdfs:comment "First washout on signal #2 (Tw3) (>= 0). Typical value = 2." . a rdf:Property; ; rdfs:label "tw4"@en; rdfs:domain ; ; ; rdfs:comment "Second washout on signal #2 (Tw4) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "t1"@en; rdfs:domain ; ; ; rdfs:comment "Lead/lag time constant (T1) (>= 0). Typical value = 0,12." . a rdf:Property; ; rdfs:label "t2"@en; rdfs:domain ; ; ; rdfs:comment "Lead/lag time constant (T2) (>= 0). Typical value = 0,02." . a rdf:Property; ; rdfs:label "t3"@en; rdfs:domain ; ; ; rdfs:comment "Lead/lag time constant (T3) (>= 0). Typical value = 0,3." . a rdf:Property; ; rdfs:label "t4"@en; rdfs:domain ; ; ; rdfs:comment "Lead/lag time constant (T4) (>= 0). Typical value = 0,02." . a rdf:Property; ; rdfs:label "t6"@en; rdfs:domain ; ; ; rdfs:comment "Time constant on signal #1 (T6) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "t7"@en; rdfs:domain ; ; ; rdfs:comment "Time constant on signal #2 (T7) (>= 0). Typical value = 2." . a rdf:Property; ; rdfs:label "t8"@en; rdfs:domain ; ; ; rdfs:comment "Lead of ramp tracking filter (T8) (>= 0). Typical value = 0,2." . a rdf:Property; ; rdfs:label "t9"@en; rdfs:domain ; ; ; rdfs:comment "Lag of ramp tracking filter (T9) (>= 0). Typical value = 0,1." . a rdf:Property; ; rdfs:label "t10"@en; rdfs:domain ; ; ; rdfs:comment "Lead/lag time constant (T10) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "t11"@en; rdfs:domain ; ; ; rdfs:comment "Lead/lag time constant (T11) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "ks1"@en; rdfs:domain ; ; ; rdfs:comment "Stabilizer gain (Ks1). Typical value = 12." . a rdf:Property; ; rdfs:label "ks2"@en; rdfs:domain ; ; ; rdfs:comment "Gain on signal #2 (Ks2). Typical value = 0,2." . a rdf:Property; ; rdfs:label "ks3"@en; rdfs:domain ; ; ; rdfs:comment "Gain on signal #2 input before ramp-tracking filter (Ks3). Typical value = 1." . a rdf:Property; ; rdfs:label "n"@en; rdfs:domain ; ; ; rdfs:comment "Order of ramp tracking filter (N). Typical value = 1." . a rdf:Property; ; rdfs:label "m"@en; rdfs:domain ; ; ; rdfs:comment "Denominator order of ramp tracking filter (M). Typical value = 5." . a rdf:Property; ; rdfs:label "vstmax"@en; rdfs:domain ; ; ; rdfs:comment "Stabilizer output maximum limit (Vstmax) (> PssIEEE2B.vstmin). Typical value = 0,1." . a rdf:Property; ; rdfs:label "vstmin"@en; rdfs:domain ; ; ; rdfs:comment "Stabilizer output minimum limit (Vstmin) (< PssIEEE2B.vstmax). Typical value = -0,1." . a rdfs:Class; rdfs:label "PssIEEE3B"@en; rdfs:subClassOf ; rdfs:comment """IEEE 421.5-2005 type PSS3B power system stabilizer model. The PSS model PSS3B has dual inputs of electrical power and rotor angular frequency deviation. The signals are used to derive an equivalent mechanical power signal. This model has 2 input signals. They have the following fixed types (expressed in terms of InputSignalKind values): the first one is of rotorAngleFrequencyDeviation type and the second one is of generatorElectricalPower type. Reference: IEEE 3B 421.5-2005, 8.3. """; ; . ; a rdf:Property; rdfs:label "t1"@en; rdfs:domain ; ; ; rdfs:comment "Transducer time constant (T1) (>= 0). Typical value = 0,012." . a rdf:Property; ; rdfs:label "t2"@en; rdfs:domain ; ; ; rdfs:comment "Transducer time constant (T2) (>= 0). Typical value = 0,012." . a rdf:Property; ; rdfs:label "tw1"@en; rdfs:domain ; ; ; rdfs:comment "Washout time constant (Tw1) (>= 0). Typical value = 0,3." . a rdf:Property; ; rdfs:label "tw2"@en; rdfs:domain ; ; ; rdfs:comment "Washout time constant (Tw2) (>= 0). Typical value = 0,3." . a rdf:Property; ; rdfs:label "tw3"@en; rdfs:domain ; ; ; rdfs:comment "Washout time constant (Tw3) (>= 0). Typical value = 0,6." . a rdf:Property; ; rdfs:label "ks1"@en; rdfs:domain ; ; ; rdfs:comment "Gain on signal # 1 (Ks1). Typical value = -0,602." . a rdf:Property; ; rdfs:label "ks2"@en; rdfs:domain ; ; ; rdfs:comment "Gain on signal # 2 (Ks2). Typical value = 30,12." . a rdf:Property; ; rdfs:label "a1"@en; rdfs:domain ; ; ; rdfs:comment "Notch filter parameter (A1). Typical value = 0,359." . a rdf:Property; ; rdfs:label "a2"@en; rdfs:domain ; ; ; rdfs:comment "Notch filter parameter (A2). Typical value = 0,586." . a rdf:Property; ; rdfs:label "a3"@en; rdfs:domain ; ; ; rdfs:comment "Notch filter parameter (A3). Typical value = 0,429." . a rdf:Property; ; rdfs:label "a4"@en; rdfs:domain ; ; ; rdfs:comment "Notch filter parameter (A4). Typical value = 0,564." . a rdf:Property; ; rdfs:label "a5"@en; rdfs:domain ; ; ; rdfs:comment "Notch filter parameter (A5). Typical value = 0,001." . a rdf:Property; ; rdfs:label "a6"@en; rdfs:domain ; ; ; rdfs:comment "Notch filter parameter (A6). Typical value = 0." . a rdf:Property; ; rdfs:label "a7"@en; rdfs:domain ; ; ; rdfs:comment "Notch filter parameter (A7). Typical value = 0,031." . a rdf:Property; ; rdfs:label "a8"@en; rdfs:domain ; ; ; rdfs:comment "Notch filter parameter (A8). Typical value = 0." . a rdf:Property; ; rdfs:label "vstmax"@en; rdfs:domain ; ; ; rdfs:comment "Stabilizer output maximum limit (Vstmax) (> PssIEEE3B.vstmin). Typical value = 0,1." . a rdf:Property; ; rdfs:label "vstmin"@en; rdfs:domain ; ; ; rdfs:comment "Stabilizer output minimum limit (Vstmin) (< PssIEEE3B.vstmax). Typical value = -0,1." . a rdfs:Class; rdfs:label "PssIEEE4B"@en; rdfs:subClassOf ; rdfs:comment """IEEE 421.5-2005 type PSS4B power system stabilizer. The PSS4B model represents a structure based on multiple working frequency bands. Three separate bands, respectively dedicated to the low-, intermediate- and high-frequency modes of oscillations, are used in this delta omega (speed input) PSS. There is an error in the in IEEE 421.5-2005 PSS4B model: the Pe input should read –Pe. This implies that the input Pe needs to be multiplied by -1. Reference: IEEE 4B 421.5-2005, 8.4. Parameter details: This model has 2 input signals. They have the following fixed types (expressed in terms of InputSignalKind values): the first one is of rotorAngleFrequencyDeviation type and the second one is of generatorElectricalPower type."""; ; . a rdf:Property; ; rdfs:label "bwh1"@en; rdfs:domain ; ; ; rdfs:comment "Notch filter 1 (high-frequency band): three dB bandwidth (Bwi). " . a rdf:Property; ; rdfs:label "bwh2"@en; rdfs:domain ; ; ; rdfs:comment "Notch filter 2 (high-frequency band): three dB bandwidth (Bwi). " . a rdf:Property; ; rdfs:label "bwl1"@en; rdfs:domain ; ; ; rdfs:comment "Notch filter 1 (low-frequency band): three dB bandwidth (Bwi). " . a rdf:Property; ; rdfs:label "bwl2"@en; rdfs:domain ; ; ; rdfs:comment "Notch filter 2 (low-frequency band): three dB bandwidth (Bwi). " . a rdf:Property; ; rdfs:label "kh"@en; rdfs:domain ; ; ; rdfs:comment "High band gain (KH). Typical value = 120." . a rdf:Property; ; rdfs:label "kh1"@en; rdfs:domain ; ; ; rdfs:comment "High band differential filter gain (KH1). Typical value = 66." . a rdf:Property; ; rdfs:label "kh11"@en; rdfs:domain ; ; ; rdfs:comment "High band first lead-lag blocks coefficient (KH11). Typical value = 1." . a rdf:Property; ; rdfs:label "kh17"@en; rdfs:domain ; ; ; rdfs:comment "High band first lead-lag blocks coefficient (KH17). Typical value = 1." . a rdf:Property; ; rdfs:label "kh2"@en; rdfs:domain ; ; ; rdfs:comment "High band differential filter gain (KH2). Typical value = 66." . a rdf:Property; ; rdfs:label "ki"@en; rdfs:domain ; ; ; rdfs:comment "Intermediate band gain (KI). Typical value = 30." . a rdf:Property; ; rdfs:label "ki1"@en; rdfs:domain ; ; ; rdfs:comment "Intermediate band differential filter gain (KI1). Typical value = 66." . a rdf:Property; ; rdfs:label "ki11"@en; rdfs:domain ; ; ; rdfs:comment "Intermediate band first lead-lag blocks coefficient (KI11). Typical value = 1." . a rdf:Property; ; rdfs:label "ki17"@en; rdfs:domain ; ; ; rdfs:comment "Intermediate band first lead-lag blocks coefficient (KI17). Typical value = 1." . a rdf:Property; ; rdfs:label "ki2"@en; rdfs:domain ; ; ; rdfs:comment "Intermediate band differential filter gain (KI2). Typical value = 66." . a rdf:Property; ; rdfs:label "kl"@en; rdfs:domain ; ; ; rdfs:comment "Low band gain (KL). Typical value = 7.5." . a rdf:Property; ; rdfs:label "kl1"@en; rdfs:domain ; ; ; rdfs:comment "Low band differential filter gain (KL1). Typical value = 66." . a rdf:Property; ; rdfs:label "kl11"@en; rdfs:domain ; ; ; rdfs:comment "Low band first lead-lag blocks coefficient (KL11). Typical value = 1." . a rdf:Property; ; rdfs:label "kl17"@en; rdfs:domain ; ; ; rdfs:comment "Low band first lead-lag blocks coefficient (KL17). Typical value = 1." . a rdf:Property; ; rdfs:label "kl2"@en; rdfs:domain ; ; ; rdfs:comment "Low band differential filter gain (KL2). Typical value = 66." . a rdf:Property; ; rdfs:label "omeganh1"@en; rdfs:domain ; ; ; rdfs:comment "Notch filter 1 (high-frequency band): filter frequency (omegani)." . a rdf:Property; ; rdfs:label "omeganh2"@en; rdfs:domain ; ; ; rdfs:comment "Notch filter 2 (high-frequency band): filter frequency (omegani)." . a rdf:Property; ; rdfs:label "omeganl1"@en; rdfs:domain ; ; ; rdfs:comment "Notch filter 1 (low-frequency band): filter frequency (omegani)." . a rdf:Property; ; rdfs:label "omeganl2"@en; rdfs:domain ; ; ; rdfs:comment "Notch filter 2 (low-frequency band): filter frequency (omegani)." . a rdf:Property; ; rdfs:label "th1"@en; rdfs:domain ; ; ; rdfs:comment "High band time constant (TH1) (>= 0). Typical value = 0,01513." . a rdf:Property; ; rdfs:label "th10"@en; rdfs:domain ; ; ; rdfs:comment "High band time constant (TH10) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "th11"@en; rdfs:domain ; ; ; rdfs:comment "High band time constant (TH11) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "th12"@en; rdfs:domain ; ; ; rdfs:comment "High band time constant (TH12) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "th2"@en; rdfs:domain ; ; ; rdfs:comment "High band time constant (TH2) (>= 0). Typical value = 0,01816." . a rdf:Property; ; rdfs:label "th3"@en; rdfs:domain ; ; ; rdfs:comment "High band time constant (TH3) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "th4"@en; rdfs:domain ; ; ; rdfs:comment "High band time constant (TH4) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "th5"@en; rdfs:domain ; ; ; rdfs:comment "High band time constant (TH5) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "th6"@en; rdfs:domain ; ; ; rdfs:comment "High band time constant (TH6) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "th7"@en; rdfs:domain ; ; ; rdfs:comment "High band time constant (TH7) (>= 0). Typical value = 0,01816." . a rdf:Property; ; rdfs:label "th8"@en; rdfs:domain ; ; ; rdfs:comment "High band time constant (TH8) (>= 0). Typical value = 0,02179." . a rdf:Property; ; rdfs:label "th9"@en; rdfs:domain ; ; ; rdfs:comment "High band time constant (TH9) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "ti1"@en; rdfs:domain ; ; ; rdfs:comment "Intermediate band time constant (TI1) (>= 0). Typical value = 0,173." . a rdf:Property; ; rdfs:label "ti10"@en; rdfs:domain ; ; ; rdfs:comment "Intermediate band time constant (TI10) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "ti11"@en; rdfs:domain ; ; ; rdfs:comment "Intermediate band time constant (TI11) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "ti12"@en; rdfs:domain ; ; ; rdfs:comment "Intermediate band time constant (TI12) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "ti2"@en; rdfs:domain ; ; ; rdfs:comment "Intermediate band time constant (TI2) (>= 0). Typical value = 0,2075." . a rdf:Property; ; rdfs:label "ti3"@en; rdfs:domain ; ; ; rdfs:comment "Intermediate band time constant (TI3) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "ti4"@en; rdfs:domain ; ; ; rdfs:comment "Intermediate band time constant (TI4) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "ti5"@en; rdfs:domain ; ; ; rdfs:comment "Intermediate band time constant (TI5) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "ti6"@en; rdfs:domain ; ; ; rdfs:comment "Intermediate band time constant (TI6) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "ti7"@en; rdfs:domain ; ; ; rdfs:comment "Intermediate band time constant (TI7) (>= 0). Typical value = 0,2075." . a rdf:Property; ; rdfs:label "ti8"@en; rdfs:domain ; ; ; rdfs:comment "Intermediate band time constant (TI8) (>= 0). Typical value = 0,2491." . a rdf:Property; ; rdfs:label "ti9"@en; rdfs:domain ; ; ; rdfs:comment "Intermediate band time constant (TI9) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "tl1"@en; rdfs:domain ; ; ; rdfs:comment "Low band time constant (TL1) (>= 0). Typical value = 1,73." . a rdf:Property; ; rdfs:label "tl10"@en; rdfs:domain ; ; ; rdfs:comment "Low band time constant (TL10) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "tl11"@en; rdfs:domain ; ; ; rdfs:comment "Low band time constant (TL11) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "tl12"@en; rdfs:domain ; ; ; rdfs:comment "Low band time constant (TL12) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "tl2"@en; rdfs:domain ; ; ; rdfs:comment "Low band time constant (TL2) (>= 0). Typical value = 2,075." . a rdf:Property; ; rdfs:label "tl3"@en; rdfs:domain ; ; ; rdfs:comment "Low band time constant (TL3) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "tl4"@en; rdfs:domain ; ; ; rdfs:comment "Low band time constant (TL4) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "tl5"@en; rdfs:domain ; ; ; rdfs:comment "Low band time constant (TL5) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "tl6"@en; rdfs:domain ; ; ; rdfs:comment "Low band time constant (TL6) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "tl7"@en; rdfs:domain ; ; ; rdfs:comment "Low band time constant (TL7) (>= 0). Typical value = 2,075." . a rdf:Property; ; rdfs:label "tl8"@en; rdfs:domain ; ; ; rdfs:comment "Low band time constant (TL8) (>= 0). Typical value = 2,491." . a rdf:Property; ; rdfs:label "tl9"@en; rdfs:domain ; ; ; rdfs:comment "Low band time constant (TL9) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "vhmax"@en; rdfs:domain ; ; ; rdfs:comment "High band output maximum limit (VHmax) (> PssIEEE4B.vhmin). Typical value = 0,6." . a rdf:Property; ; rdfs:label "vhmin"@en; rdfs:domain ; ; ; rdfs:comment "High band output minimum limit (VHmin) (< PssIEEE4V.vhmax). Typical value = -0,6." . a rdf:Property; ; rdfs:label "vimax"@en; rdfs:domain ; ; ; rdfs:comment "Intermediate band output maximum limit (VImax) (> PssIEEE4B.vimin). Typical value = 0,6." . a rdf:Property; ; rdfs:label "vimin"@en; rdfs:domain ; ; ; rdfs:comment "Intermediate band output minimum limit (VImin) (< PssIEEE4B.vimax). Typical value = -0,6." . a rdf:Property; ; rdfs:label "vlmax"@en; rdfs:domain ; ; ; rdfs:comment "Low band output maximum limit (VLmax) (> PssIEEE4B.vlmin). Typical value = 0,075." . a rdf:Property; ; rdfs:label "vlmin"@en; rdfs:domain ; ; ; rdfs:comment "Low band output minimum limit (VLmin) (< PssIEEE4B.vlmax). Typical value = -0,075." . a rdf:Property; ; rdfs:label "vstmax"@en; rdfs:domain ; ; ; rdfs:comment "PSS output maximum limit (VSTmax) (> PssIEEE4B.vstmin). Typical value = 0,15." . a rdf:Property; ; rdfs:label "vstmin"@en; rdfs:domain ; ; ; rdfs:comment "PSS output minimum limit (VSTmin) (< PssIEEE4B.vstmax). Typical value = -0,15." . a rdfs:Class; rdfs:label "Pss1"@en; rdfs:subClassOf ; rdfs:comment "Italian PSS with three inputs (speed, frequency, power)."; ; . a rdf:Property; ; rdfs:label "komega"@en; rdfs:domain ; ; ; rdfs:comment "Shaft speed power input gain (Komega). Typical value = 0." . a rdf:Property; ; rdfs:label "kf"@en; rdfs:domain ; ; ; rdfs:comment "Frequency power input gain (KF). Typical value = 5." . a rdf:Property; ; rdfs:label "kpe"@en; rdfs:domain ; ; ; rdfs:comment "Electric power input gain (KPE). Typical value = 0,3." . a rdf:Property; ; rdfs:label "pmin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum power PSS enabling (Pmin). Typical value = 0,25." . a rdf:Property; ; rdfs:label "ks"@en; rdfs:domain ; ; ; rdfs:comment "PSS gain (Ks). Typical value = 1." . a rdf:Property; ; rdfs:label "vsmn"@en; rdfs:domain ; ; ; rdfs:comment "Stabilizer output maximum limit (VSMN). Typical value = -0,06." . a rdf:Property; ; rdfs:label "vsmx"@en; rdfs:domain ; ; ; rdfs:comment "Stabilizer output minimum limit (VSMX). Typical value = 0,06." . a rdf:Property; ; rdfs:label "tpe"@en; rdfs:domain ; ; ; rdfs:comment "Electric power filter time constant (TPE) (>= 0). Typical value = 0,05." . a rdf:Property; ; rdfs:label "t5"@en; rdfs:domain ; ; ; rdfs:comment "Washout (T5) (>= 0). Typical value = 3,5." . a rdf:Property; ; rdfs:label "t6"@en; rdfs:domain ; ; ; rdfs:comment "Filter time constant (T6) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "t7"@en; rdfs:domain ; ; ; rdfs:comment "Lead/lag time constant (T7) (>= 0). If = 0, both blocks are bypassed. Typical value = 0." . a rdf:Property; ; rdfs:label "t8"@en; rdfs:domain ; ; ; rdfs:comment "Lead/lag time constant (T8) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "t9"@en; rdfs:domain ; ; ; rdfs:comment "Lead/lag time constant (T9) (>= 0). If = 0, both blocks are bypassed. Typical value = 0." . a rdf:Property; ; rdfs:label "t10"@en; rdfs:domain ; ; ; rdfs:comment "Lead/lag time constant (T10) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "vadat"@en; rdfs:domain ; ; ; rdfs:comment """Signal selector (VADAT). true = closed (generator power is greater than Pmin) false = open (Pe is smaller than Pmin). Typical value = true.""" . a rdfs:Class; rdfs:label "Pss1A"@en; rdfs:subClassOf ; rdfs:comment "Single input power system stabilizer. It is a modified version in order to allow representation of various vendors' implementations on PSS type 1A."; ; . a rdf:Property; ; rdfs:label "inputSignalType"@en; rdfs:domain ; rdfs:range ; ; rdfs:comment "Type of input signal (rotorAngularFrequencyDeviation, busFrequencyDeviation, generatorElectricalPower, generatorAcceleratingPower, busVoltage, or busVoltageDerivative)." . a rdf:Property; ; rdfs:label "a1"@en; rdfs:domain ; ; ; rdfs:comment "Notch filter parameter (A1)." . a rdf:Property; ; rdfs:label "a2"@en; rdfs:domain ; ; ; rdfs:comment "Notch filter parameter (A2). " . a rdf:Property; ; rdfs:label "t1"@en; rdfs:domain ; ; ; rdfs:comment "Lead/lag time constant (T1) (>= 0). " . a rdf:Property; ; rdfs:label "t2"@en; rdfs:domain ; ; ; rdfs:comment "Lead/lag time constant (T2) (>= 0). " . a rdf:Property; ; rdfs:label "t3"@en; rdfs:domain ; ; ; rdfs:comment "Lead/lag time constant (T3) (>= 0). " . a rdf:Property; ; rdfs:label "t4"@en; rdfs:domain ; ; ; rdfs:comment "Lead/lag time constant (T4) (>= 0). " . a rdf:Property; ; rdfs:label "t5"@en; rdfs:domain ; ; ; rdfs:comment "Washout time constant (T5) (>= 0). " . a rdf:Property; ; rdfs:label "t6"@en; rdfs:domain ; ; ; rdfs:comment "Transducer time constant (T6) (>= 0). " . a rdf:Property; ; rdfs:label "ks"@en; rdfs:domain ; ; ; rdfs:comment "Stabilizer gain (Ks). " . a rdf:Property; ; rdfs:label "vrmax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum stabilizer output (Vrmax) (> Pss1A.vrmin). " . a rdf:Property; ; rdfs:label "vrmin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum stabilizer output (Vrmin) (< Pss1A.vrmax). " . a rdf:Property; ; rdfs:label "vcu"@en; rdfs:domain ; ; ; rdfs:comment "Stabilizer input cutoff threshold (Vcu). " . a rdf:Property; ; rdfs:label "vcl"@en; rdfs:domain ; ; ; rdfs:comment "Stabilizer input cutoff threshold (Vcl). " . a rdf:Property; ; rdfs:label "a3"@en; rdfs:domain ; ; ; rdfs:comment "Notch filter parameter (A3). " . a rdf:Property; ; rdfs:label "a4"@en; rdfs:domain ; ; ; rdfs:comment "Notch filter parameter (A4). " . a rdf:Property; ; rdfs:label "a5"@en; rdfs:domain ; ; ; rdfs:comment "Notch filter parameter (A5). " . a rdf:Property; ; rdfs:label "a6"@en; rdfs:domain ; ; ; rdfs:comment "Notch filter parameter (A6). " . a rdf:Property; ; rdfs:label "a7"@en; rdfs:domain ; ; ; rdfs:comment "Notch filter parameter (A7). " . a rdf:Property; ; rdfs:label "a8"@en; rdfs:domain ; ; ; rdfs:comment "Notch filter parameter (A8). " . a rdf:Property; ; rdfs:label "kd"@en; rdfs:domain ; ; ; rdfs:comment """Selector (Kd). true = e-sTdelay used false = e-sTdelay not used.""" . a rdf:Property; ; rdfs:label "tdelay"@en; rdfs:domain ; ; ; rdfs:comment "Time constant (Tdelay) (>= 0). " . a rdfs:Class; rdfs:label "Pss2B"@en; rdfs:subClassOf ; rdfs:comment "Modified IEEE PSS2B. Extra lead/lag (or rate) block added at end (up to 4 lead/lags total)."; ; . a rdf:Property; ; rdfs:label "vsi1max"@en; rdfs:domain ; ; ; rdfs:comment "Input signal #1 maximum limit (Vsi1max) (> Pss2B.vsi1min). Typical value = 2." . a rdf:Property; ; rdfs:label "vsi1min"@en; rdfs:domain ; ; ; rdfs:comment "Input signal #1 minimum limit (Vsi1min) (< Pss2B.vsi1max). Typical value = -2." . a rdf:Property; ; rdfs:label "tw1"@en; rdfs:domain ; ; ; rdfs:comment "First washout on signal #1 (Tw1) (>= 0). Typical value = 2." . a rdf:Property; ; rdfs:label "tw2"@en; rdfs:domain ; ; ; rdfs:comment "Second washout on signal #1 (Tw2) (>= 0). Typical value = 2." . a rdf:Property; ; rdfs:label "vsi2max"@en; rdfs:domain ; ; ; rdfs:comment "Input signal #2 maximum limit (Vsi2max) (> Pss2B.vsi2min). Typical value = 2." . a rdf:Property; ; rdfs:label "vsi2min"@en; rdfs:domain ; ; ; rdfs:comment "Input signal #2 minimum limit (Vsi2min) (< Pss2B.vsi2max). Typical value = -2." . a rdf:Property; ; rdfs:label "tw3"@en; rdfs:domain ; ; ; rdfs:comment "First washout on signal #2 (Tw3) (>= 0). Typical value = 2." . a rdf:Property; ; rdfs:label "tw4"@en; rdfs:domain ; ; ; rdfs:comment "Second washout on signal #2 (Tw4) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "t1"@en; rdfs:domain ; ; ; rdfs:comment "Lead/lag time constant (T1) (>= 0). Typical value = 0,12." . a rdf:Property; ; rdfs:label "t2"@en; rdfs:domain ; ; ; rdfs:comment "Lead/lag time constant (T2) (>= 0). Typical value = 0,02." . a rdf:Property; ; rdfs:label "t3"@en; rdfs:domain ; ; ; rdfs:comment "Lead/lag time constant (T3) (>= 0). Typical value = 0,3." . a rdf:Property; ; rdfs:label "t4"@en; rdfs:domain ; ; ; rdfs:comment "Lead/lag time constant (T4) (>= 0). Typical value = 0,02." . a rdf:Property; ; rdfs:label "t6"@en; rdfs:domain ; ; ; rdfs:comment "Time constant on signal #1 (T6) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "t7"@en; rdfs:domain ; ; ; rdfs:comment "Time constant on signal #2 (T7) (>= 0). Typical value = 2." . a rdf:Property; ; rdfs:label "t8"@en; rdfs:domain ; ; ; rdfs:comment "Lead of ramp tracking filter (T8) (>= 0). Typical value = 0,2." . a rdf:Property; ; rdfs:label "t9"@en; rdfs:domain ; ; ; rdfs:comment "Lag of ramp tracking filter (T9) (>= 0). Typical value = 0,1." . a rdf:Property; ; rdfs:label "t10"@en; rdfs:domain ; ; ; rdfs:comment "Lead/lag time constant (T10) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "t11"@en; rdfs:domain ; ; ; rdfs:comment "Lead/lag time constant (T11) (>= 0). Typical value = 0." . ; rdfs:label "ks1"@en; rdfs:domain ; ; a rdf:Property; ; rdfs:comment "Stabilizer gain (Ks1). Typical value = 12." . a rdf:Property; ; rdfs:label "ks2"@en; rdfs:domain ; ; ; rdfs:comment "Gain on signal #2 (Ks2). Typical value = 0,2." . a rdf:Property; ; rdfs:label "ks3"@en; rdfs:domain ; ; ; rdfs:comment "Gain on signal #2 input before ramp-tracking filter (Ks3). Typical value = 1." . a rdf:Property; ; rdfs:label "ks4"@en; rdfs:domain ; ; ; rdfs:comment "Gain on signal #2 input after ramp-tracking filter (Ks4). Typical value = 1." . a rdf:Property; ; rdfs:label "n"@en; rdfs:domain ; ; ; rdfs:comment "Order of ramp tracking filter (n). Typical value = 1." . a rdf:Property; ; rdfs:label "m"@en; rdfs:domain ; ; ; rdfs:comment "Denominator order of ramp tracking filter (m). Typical value = 5." . a rdf:Property; ; rdfs:label "vstmax"@en; rdfs:domain ; ; ; rdfs:comment "Stabilizer output maximum limit (Vstmax) (> Pss2B.vstmin). Typical value = 0,1." . a rdf:Property; ; rdfs:label "vstmin"@en; rdfs:domain ; ; ; rdfs:comment "Stabilizer output minimum limit (Vstmin) (< Pss2B.vstmax). Typical value = -0,1." . a rdf:Property; ; rdfs:label "a"@en; rdfs:domain ; ; ; rdfs:comment "Numerator constant (a). Typical value = 1." . a rdf:Property; ; rdfs:label "ta"@en; rdfs:domain ; ; ; rdfs:comment "Lead constant (Ta) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "tb"@en; rdfs:domain ; ; ; rdfs:comment "Lag time constant (Tb) (>= 0). Typical value = 0." . a rdfs:Class; rdfs:label "Pss2ST"@en; rdfs:subClassOf ; rdfs:comment "PTI microprocessor-based stabilizer type 1."; ; . a rdf:Property; ; rdfs:label "inputSignal1Type"@en; rdfs:domain ; rdfs:range ; ; rdfs:comment "Type of input signal #1 (rotorAngularFrequencyDeviation, busFrequencyDeviation, generatorElectricalPower, generatorAcceleratingPower, busVoltage, or busVoltageDerivative - shall be different than Pss2ST.inputSignal2Type). Typical value = rotorAngularFrequencyDeviation." . a rdf:Property; ; rdfs:label "inputSignal2Type"@en; rdfs:domain ; rdfs:range ; ; rdfs:comment "Type of input signal #2 (rotorAngularFrequencyDeviation, busFrequencyDeviation, generatorElectricalPower, generatorAcceleratingPower, busVoltage, or busVoltageDerivative - shall be different than Pss2ST.inputSignal1Type). Typical value = busVoltageDerivative." . a rdf:Property; ; rdfs:label "k1"@en; rdfs:domain ; ; ; rdfs:comment "Gain (K1). " . a rdf:Property; ; rdfs:label "k2"@en; rdfs:domain ; ; ; rdfs:comment "Gain (K2). " . a rdf:Property; ; rdfs:label "t1"@en; rdfs:domain ; ; ; rdfs:comment "Time constant (T1) (>= 0). " . a rdf:Property; ; rdfs:label "t2"@en; rdfs:domain ; ; ; rdfs:comment "Time constant (T2) (>= 0)." . a rdf:Property; ; rdfs:label "t3"@en; rdfs:domain ; ; ; rdfs:comment "Time constant (T3) (>= 0). " . a rdf:Property; ; rdfs:label "t4"@en; rdfs:domain ; ; ; rdfs:comment "Time constant (T4) (>= 0)." . a rdf:Property; ; rdfs:label "t5"@en; rdfs:domain ; ; ; rdfs:comment "Time constant (T5) (>= 0). " . a rdf:Property; ; rdfs:label "t6"@en; rdfs:domain ; ; ; rdfs:comment "Time constant (T6) (>= 0). " . a rdf:Property; ; rdfs:label "t7"@en; rdfs:domain ; ; ; rdfs:comment "Time constant (T7) (>= 0). " . a rdf:Property; ; rdfs:label "t8"@en; rdfs:domain ; ; ; rdfs:comment "Time constant (T8) (>= 0). " . a rdf:Property; ; rdfs:label "t9"@en; rdfs:domain ; ; ; rdfs:comment "Time constant (T9) (>= 0). " . a rdf:Property; ; rdfs:label "t10"@en; rdfs:domain ; ; ; rdfs:comment "Time constant (T10) (>= 0). " . a rdf:Property; ; rdfs:label "lsmax"@en; rdfs:domain ; ; ; rdfs:comment "Limiter (LSMAX) (> Pss2ST.lsmin). " . a rdf:Property; ; rdfs:label "lsmin"@en; rdfs:domain ; ; ; rdfs:comment "Limiter (LSMIN) (< Pss2ST.lsmax). " . a rdf:Property; ; rdfs:label "vcu"@en; rdfs:domain ; ; ; rdfs:comment "Cutoff limiter (VCU). " . a rdf:Property; ; rdfs:label "vcl"@en; rdfs:domain ; ; ; rdfs:comment "Cutoff limiter (VCL). " . a rdfs:Class; rdfs:label "Pss5"@en; rdfs:subClassOf ; rdfs:comment "Detailed Italian PSS."; ; . a rdf:Property; ; rdfs:label "kpe"@en; rdfs:domain ; ; ; rdfs:comment "Electric power input gain (KPE). Typical value = 0,3." . a rdf:Property; ; rdfs:label "kf"@en; rdfs:domain ; ; ; rdfs:comment "Frequency/shaft speed input gain (KF). Typical value = 5." . a rdf:Property; ; rdfs:label "isfreq"@en; rdfs:domain ; ; ; rdfs:comment """Selector for frequency/shaft speed input (isFreq). true = speed (same meaning as InputSignaKind.rotorSpeed) false = frequency (same meaning as InputSignalKind.busFrequency). Typical value = true (same meaning as InputSignalKind.rotorSpeed).""" . a rdf:Property; ; rdfs:label "kpss"@en; rdfs:domain ; ; ; rdfs:comment "PSS gain (KPSS). Typical value = 1." . a rdf:Property; ; rdfs:label "ctw2"@en; rdfs:domain ; ; ; rdfs:comment """Selector for second washout enabling (CTW2). true = second washout filter is bypassed false = second washout filter in use. Typical value = true.""" . a rdf:Property; ; rdfs:label "tw1"@en; rdfs:domain ; ; ; rdfs:comment "First washout (TW1) (>= 0). Typical value = 3,5." . a rdf:Property; ; rdfs:label "tw2"@en; rdfs:domain ; ; ; rdfs:comment "Second washout (TW2) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "tl1"@en; rdfs:domain ; ; ; rdfs:comment "Lead/lag time constant (TL1) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "tl2"@en; rdfs:domain ; ; ; rdfs:comment "Lead/lag time constant (TL2) (>= 0). If = 0, both blocks are bypassed. Typical value = 0." . a rdf:Property; ; rdfs:label "tl3"@en; rdfs:domain ; ; ; rdfs:comment "Lead/lag time constant (TL3) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "tl4"@en; rdfs:domain ; ; ; rdfs:comment "Lead/lag time constant (TL4) (>= 0). If = 0, both blocks are bypassed. Typical value = 0." . a rdf:Property; ; rdfs:label "vsmn"@en; rdfs:domain ; ; ; rdfs:comment "Stabilizer output maximum limit (VSMN). Typical value = -0,1." . a rdf:Property; ; rdfs:label "vsmx"@en; rdfs:domain ; ; ; rdfs:comment "Stabilizer output minimum limit (VSMX). Typical value = 0,1." . a rdf:Property; ; rdfs:label "tpe"@en; rdfs:domain ; ; ; rdfs:comment "Electric power filter time constant (TPE) (>= 0). Typical value = 0,05." . a rdf:Property; ; rdfs:label "pmin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum power PSS enabling (Pmin). Typical value = 0,25." . a rdf:Property; ; rdfs:label "deadband"@en; rdfs:domain ; ; ; rdfs:comment "Stabilizer output deadband (DEADBAND). Typical value = 0." . a rdf:Property; ; rdfs:label "vadat"@en; rdfs:domain ; ; ; rdfs:comment """Signal selector (VadAtt). true = closed (generator power is greater than Pmin) false = open (Pe is smaller than Pmin). Typical value = true.""" . a rdfs:Class; rdfs:label "PssELIN2"@en; rdfs:subClassOf ; rdfs:comment "Power system stabilizer typically associated with ExcELIN2 (though PssIEEE2B or Pss2B can also be used)."; ; . a rdf:Property; ; rdfs:label "ts1"@en; rdfs:domain ; ; ; rdfs:comment "Time constant (Ts1) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "ts2"@en; rdfs:domain ; ; ; rdfs:comment "Time constant (Ts2) (>= 0). Typical value = 1." . a rdf:Property; ; rdfs:label "ts3"@en; rdfs:domain ; ; ; rdfs:comment "Time constant (Ts3) (>= 0). Typical value = 1." . a rdf:Property; ; rdfs:label "ts4"@en; rdfs:domain ; ; ; rdfs:comment "Time constant (Ts4) (>= 0). Typical value = 0,1." . a rdf:Property; ; rdfs:label "ts5"@en; rdfs:domain ; ; ; rdfs:comment "Time constant (Ts5) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "ts6"@en; rdfs:domain ; ; ; rdfs:comment "Time constant (Ts6) (>= 0). Typical value = 1." . a rdf:Property; ; rdfs:label "ks1"@en; rdfs:domain ; ; ; rdfs:comment "Gain (Ks1). Typical value = 1." . a rdf:Property; ; rdfs:label "ks2"@en; rdfs:domain ; ; ; rdfs:comment "Gain (Ks2). Typical value = 0,1." . a rdf:Property; ; rdfs:label "ppss"@en; rdfs:domain ; ; ; rdfs:comment "Coefficient (p_PSS) (>= 0 and <= 4). Typical value = 0,1." . a rdf:Property; ; rdfs:label "apss"@en; rdfs:domain ; ; ; rdfs:comment "Coefficient (a_PSS). Typical value = 0,1." . a rdf:Property; ; rdfs:label "psslim"@en; rdfs:domain ; ; ; rdfs:comment "PSS limiter (psslim). Typical value = 0,1." . a rdfs:Class; rdfs:label "PssPTIST1"@en; rdfs:subClassOf ; rdfs:comment "PTI microprocessor-based stabilizer type 1."; ; . a rdf:Property; ; rdfs:label "m"@en; rdfs:domain ; ; ; rdfs:comment "(M). M = 2 x H. Typical value = 5." . a rdf:Property; ; rdfs:label "tf"@en; rdfs:domain ; ; ; rdfs:comment "Time constant (Tf) (>= 0). Typical value = 0,2." . a rdf:Property; ; rdfs:label "tp"@en; rdfs:domain ; ; ; rdfs:comment "Time constant (Tp) (>= 0). Typical value = 0,2." . a rdf:Property; ; rdfs:label "t1"@en; rdfs:domain ; ; ; rdfs:comment "Time constant (T1) (>= 0). Typical value = 0,3." . a rdf:Property; ; rdfs:label "t2"@en; rdfs:domain ; ; ; rdfs:comment "Time constant (T2) (>= 0). Typical value = 1." . a rdf:Property; ; rdfs:label "t3"@en; rdfs:domain ; ; ; rdfs:comment "Time constant (T3) (>= 0). Typical value = 0,2." . a rdf:Property; ; rdfs:label "t4"@en; rdfs:domain ; ; ; rdfs:comment "Time constant (T4) (>= 0). Typical value = 0,05." . a rdf:Property; ; rdfs:label "k"@en; rdfs:domain ; ; ; rdfs:comment "Gain (K). Typical value = 9." . a rdf:Property; ; rdfs:label "dtf"@en; rdfs:domain ; ; ; rdfs:comment "Time step frequency calculation (deltatf) (>= 0). Typical value = 0,025." . a rdf:Property; ; rdfs:label "dtc"@en; rdfs:domain ; ; ; rdfs:comment "Time step related to activation of controls (deltatc) (>= 0). Typical value = 0,025." . a rdf:Property; ; rdfs:label "dtp"@en; rdfs:domain ; ; ; rdfs:comment "Time step active power calculation (deltatp) (>= 0). Typical value = 0,0125." . a rdfs:Class; rdfs:label "PssPTIST3"@en; rdfs:subClassOf ; rdfs:comment "PTI microprocessor-based stabilizer type 3."; ; . a rdf:Property; ; rdfs:label "m"@en; rdfs:domain ; ; ; rdfs:comment "(M). M = 2 x H. Typical value = 5." . a rdf:Property; ; rdfs:label "tf"@en; rdfs:domain ; ; ; rdfs:comment "Time constant (Tf) (>= 0). Typical value = 0,2." . a rdf:Property; ; rdfs:label "tp"@en; rdfs:domain ; ; ; rdfs:comment "Time constant (Tp) (>= 0). Typical value = 0,2." . a rdf:Property; ; rdfs:label "t1"@en; rdfs:domain ; ; ; rdfs:comment "Time constant (T1) (>= 0). Typical value = 0,3." . a rdf:Property; ; rdfs:label "t2"@en; rdfs:domain ; ; ; rdfs:comment "Time constant (T2) (>= 0). Typical value = 1." . a rdf:Property; ; rdfs:label "t3"@en; rdfs:domain ; ; ; rdfs:comment "Time constant (T3) (>= 0). Typical value = 0,2." . a rdf:Property; ; rdfs:label "t4"@en; rdfs:domain ; ; ; rdfs:comment "Time constant (T4) (>= 0). Typical value = 0,05." . a rdf:Property; ; rdfs:label "k"@en; rdfs:domain ; ; ; rdfs:comment "Gain (K). Typical value = 9." . a rdf:Property; ; rdfs:label "dtf"@en; rdfs:domain ; ; ; rdfs:comment "Time step frequency calculation (deltatf) (>= 0). Typical value = 0,025 (0,03 for 50 Hz)." . a rdf:Property; ; rdfs:label "dtc"@en; rdfs:domain ; ; ; rdfs:comment "Time step related to activation of controls (deltatc) (>= 0). Typical value = 0,025 (0,03 for 50 Hz)." . a rdf:Property; ; rdfs:label "dtp"@en; rdfs:domain ; ; ; rdfs:comment "Time step active power calculation (deltatp) (>= 0). Typical value = 0,0125 (0,015 for 50 Hz)." . a rdf:Property; ; rdfs:label "t5"@en; rdfs:domain ; ; ; rdfs:comment "Time constant (T5) (>= 0). " . a rdf:Property; ; rdfs:label "t6"@en; rdfs:domain ; ; ; rdfs:comment "Time constant (T6) (>= 0). " . a rdf:Property; ; rdfs:label "a0"@en; rdfs:domain ; ; ; rdfs:comment "Filter coefficient (A0). " . a rdf:Property; ; rdfs:label "a1"@en; rdfs:domain ; ; ; rdfs:comment "Limiter (Al). " . a rdf:Property; ; rdfs:label "a2"@en; rdfs:domain ; ; ; rdfs:comment "Filter coefficient (A2). " . a rdf:Property; ; rdfs:label "b0"@en; rdfs:domain ; ; ; rdfs:comment "Filter coefficient (B0). " . a rdf:Property; ; rdfs:label "b1"@en; rdfs:domain ; ; ; rdfs:comment "Filter coefficient (B1). " . a rdf:Property; ; rdfs:label "b2"@en; rdfs:domain ; ; ; rdfs:comment "Filter coefficient (B2). " . a rdf:Property; ; rdfs:label "a3"@en; rdfs:domain ; ; ; rdfs:comment "Filter coefficient (A3). " . a rdf:Property; ; rdfs:label "a4"@en; rdfs:domain ; ; ; rdfs:comment "Filter coefficient (A4). " . a rdf:Property; ; rdfs:label "a5"@en; rdfs:domain ; ; ; rdfs:comment "Filter coefficient (A5). " . a rdf:Property; ; rdfs:label "b3"@en; rdfs:domain ; ; ; rdfs:comment "Filter coefficient (B3). " . a rdf:Property; ; rdfs:label "b4"@en; rdfs:domain ; ; ; rdfs:comment "Filter coefficient (B4). " . a rdf:Property; ; rdfs:label "b5"@en; rdfs:domain ; ; ; rdfs:comment "Filter coefficient (B5). " . a rdf:Property; ; rdfs:label "athres"@en; rdfs:domain ; ; ; rdfs:comment "Threshold value above which output averaging will be bypassed (Athres). Typical value = 0,005." . a rdf:Property; ; rdfs:label "dl"@en; rdfs:domain ; ; ; rdfs:comment "Limiter (Dl). " . a rdf:Property; ; rdfs:label "al"@en; rdfs:domain ; ; ; rdfs:comment "Limiter (Al)." . a rdf:Property; ; rdfs:label "lthres"@en; rdfs:domain ; ; ; rdfs:comment "Threshold value (Lthres)." . a rdf:Property; ; rdfs:label "pmin"@en; rdfs:domain ; ; ; rdfs:comment "(Pmin)." . a rdf:Property; ; rdfs:label "isw"@en; rdfs:domain ; ; ; rdfs:comment """Digital/analogue output switch (Isw). true = produce analogue output false = convert to digital output, using tap selection table. """ . a rdf:Property; ; rdfs:label "nav"@en; rdfs:domain ; ; ; rdfs:comment "Number of control outputs to average (NAV) (1 <= NAV <= 16). Typical value = 4." . a rdf:Property; ; rdfs:label "ncl"@en; rdfs:domain ; ; ; rdfs:comment "Number of counts at limit to active limit function (NCL) (> 0). " . a rdf:Property; ; rdfs:label "ncr"@en; rdfs:domain ; ; ; rdfs:comment "Number of counts until reset after limit function is triggered (NCR). " . a rdfs:Class; rdfs:label "PssRQB"@en; rdfs:subClassOf ; rdfs:comment "Power system stabilizer type RQB. This power system stabilizer is intended to be used together with excitation system type ExcRQB, which is primarily used in nuclear or thermal generating units."; ; . a rdf:Property; ; rdfs:label "ki2"@en; rdfs:domain ; ; ; rdfs:comment "Speed input gain (Ki2). Typical value = 3,43." . a rdf:Property; ; rdfs:label "ki3"@en; rdfs:domain ; ; ; rdfs:comment "Electrical power input gain (Ki3). Typical value = -11,45." . a rdf:Property; ; rdfs:label "ki4"@en; rdfs:domain ; ; ; rdfs:comment "Mechanical power input gain (Ki4). Typical value = 11,86." . a rdf:Property; ; rdfs:label "t4m"@en; rdfs:domain ; ; ; rdfs:comment "Input time constant (T4M) (>= 0). Typical value = 5." . a rdf:Property; ; rdfs:label "tomd"@en; rdfs:domain ; ; ; rdfs:comment "Speed delay (TOMD) (>= 0). Typical value = 0,02." . a rdf:Property; ; rdfs:label "tomsl"@en; rdfs:domain ; ; ; rdfs:comment "Speed time constant (TOMSL) (>= 0). Typical value = 0,04." . a rdf:Property; ; rdfs:label "t4mom"@en; rdfs:domain ; ; ; rdfs:comment "Speed time constant (T4MOM) (>= 0). Typical value = 1,27." . a rdf:Property; ; rdfs:label "sibv"@en; rdfs:domain ; ; ; rdfs:comment "Speed deadband (SIBV). Typical value = 0,006." . a rdf:Property; ; rdfs:label "kdpm"@en; rdfs:domain ; ; ; rdfs:comment "Lead lag gain (KDPM). Typical value = 0,185." . a rdf:Property; ; rdfs:label "t4f"@en; rdfs:domain ; ; ; rdfs:comment "Lead lag time constant (T4F) (>= 0). Typical value = 0,045." . a rdfs:Class; rdfs:label "PssSB4"@en; rdfs:subClassOf ; rdfs:comment "Power sensitive stabilizer model."; ; . a rdf:Property; ; rdfs:label "tt"@en; rdfs:domain ; ; ; rdfs:comment "Time constant (Tt) (>= 0). Typical value = 0,18." . a rdf:Property; ; rdfs:label "kx"@en; rdfs:domain ; ; ; rdfs:comment "Gain (Kx). Typical value = 2,7." . a rdf:Property; ; rdfs:label "tx2"@en; rdfs:domain ; ; ; rdfs:comment "Time constant (Tx2) (>= 0). Typical value = 5,0." . a rdf:Property; ; rdfs:label "ta"@en; rdfs:domain ; ; ; rdfs:comment "Time constant (Ta) (>= 0). Typical value = 0,37." . a rdf:Property; ; rdfs:label "tx1"@en; rdfs:domain ; ; ; rdfs:comment "Reset time constant (Tx1) (>= 0). Typical value = 0,035." . a rdf:Property; ; rdfs:label "tb"@en; rdfs:domain ; ; ; rdfs:comment "Time constant (Tb) (>= 0). Typical value = 0,37." . a rdf:Property; ; rdfs:label "tc"@en; rdfs:domain ; ; ; rdfs:comment "Time constant (Tc) (>= 0). Typical value = 0,035." . a rdf:Property; ; rdfs:label "td"@en; rdfs:domain ; ; ; rdfs:comment "Time constant (Td) (>= 0). Typical value = 0,0." . a rdf:Property; ; rdfs:label "te"@en; rdfs:domain ; ; ; rdfs:comment "Time constant (Te) (>= 0). Typical value = 0,0169." . a rdf:Property; ; rdfs:label "vsmax"@en; rdfs:domain ; ; ; rdfs:comment "Limiter (Vsmax) (> PssSB4.vsmin). Typical value = 0,062." . a rdf:Property; ; rdfs:label "vsmin"@en; rdfs:domain ; ; ; rdfs:comment "Limiter (Vsmin) (< PssSB4.vsmax). Typical value = -0,062." . a rdfs:Class; rdfs:label "PssSH"@en; rdfs:subClassOf ; rdfs:comment """SiemensTM “H infinity” power system stabilizer with generator electrical power input. [Footnote: Siemens \"H infinity\" power system stabilizers are an example of suitable products available commercially. This information is given for the convenience of users of this document and does not constitute an endorsement by IEC of these products.] """; ; . a rdf:Property; ; rdfs:label "k"@en; rdfs:domain ; ; ; rdfs:comment "Main gain (K). Typical value = 1." . a rdf:Property; ; rdfs:label "k0"@en; rdfs:domain ; ; ; rdfs:comment "Gain 0 (K0). Typical value = 0,012." . a rdf:Property; ; rdfs:label "k1"@en; rdfs:domain ; ; ; rdfs:comment "Gain 1 (K1). Typical value = 0,488." . a rdf:Property; ; rdfs:label "k2"@en; rdfs:domain ; ; ; rdfs:comment "Gain 2 (K2). Typical value = 0,064." . a rdf:Property; ; rdfs:label "k3"@en; rdfs:domain ; ; ; rdfs:comment "Gain 3 (K3). Typical value = 0,224." . a rdf:Property; ; rdfs:label "k4"@en; rdfs:domain ; ; ; rdfs:comment "Gain 4 (K4). Typical value = 0,1." . a rdf:Property; ; rdfs:label "td"@en; rdfs:domain ; ; ; rdfs:comment "Input time constant (Td) (>= 0). Typical value = 10." . a rdf:Property; ; rdfs:label "t1"@en; rdfs:domain ; ; ; rdfs:comment "Time constant 1 (T1) (> 0). Typical value = 0,076." . a rdf:Property; ; rdfs:label "t2"@en; rdfs:domain ; ; ; rdfs:comment "Time constant 2 (T2) (> 0). Typical value = 0,086." . a rdf:Property; ; rdfs:label "t3"@en; rdfs:domain ; ; ; rdfs:comment "Time constant 3 (T3) (> 0). Typical value = 1,068." . a rdf:Property; ; rdfs:label "t4"@en; rdfs:domain ; ; ; rdfs:comment "Time constant 4 (T4) (> 0). Typical value = 1,913." . a rdf:Property; ; rdfs:label "vsmax"@en; rdfs:domain ; ; ; rdfs:comment "Output maximum limit (Vsmax) (> PssSH.vsmin). Typical value = 0,1." . a rdf:Property; ; rdfs:label "vsmin"@en; rdfs:domain ; ; ; rdfs:comment "Output minimum limit (Vsmin) (< PssSH.vsmax). Typical value = -0,1." . rdfs:label "PssSK"@en; rdfs:subClassOf ; rdfs:comment "Slovakian PSS with three inputs."; ; a rdfs:Class; . a rdf:Property; ; rdfs:label "k1"@en; rdfs:domain ; ; ; rdfs:comment "Gain P (K1). Typical value = -0,3." . a rdf:Property; ; rdfs:label "k2"@en; rdfs:domain ; ; ; rdfs:comment "Gain fE (K2). Typical value = -0,15." . a rdf:Property; ; rdfs:label "k3"@en; rdfs:domain ; ; ; rdfs:comment "Gain If (K3). Typical value = 10." . a rdf:Property; ; rdfs:label "t1"@en; rdfs:domain ; ; ; rdfs:comment "Denominator time constant (T1) (> 0,005). Typical value = 0,3." . a rdf:Property; ; rdfs:label "t2"@en; rdfs:domain ; ; ; rdfs:comment "Filter time constant (T2) (> 0,005). Typical value = 0,35." . a rdf:Property; ; rdfs:label "t3"@en; rdfs:domain ; ; ; rdfs:comment "Denominator time constant (T3) (> 0,005). Typical value = 0,22." . a rdf:Property; ; rdfs:label "t4"@en; rdfs:domain ; ; ; rdfs:comment "Filter time constant (T4) (> 0,005). Typical value = 0,02." . a rdf:Property; ; rdfs:label "t5"@en; rdfs:domain ; ; ; rdfs:comment "Denominator time constant (T5) (> 0,005). Typical value = 0,02." . a rdf:Property; ; rdfs:label "t6"@en; rdfs:domain ; ; ; rdfs:comment "Filter time constant (T6) (> 0,005). Typical value = 0,02." . a rdf:Property; ; rdfs:label "vsmax"@en; rdfs:domain ; ; ; rdfs:comment "Stabilizer output maximum limit (VSMAX) (> PssSK.vsmin). Typical value = 0,4." . a rdf:Property; ; rdfs:label "vsmin"@en; rdfs:domain ; ; ; rdfs:comment "Stabilizer output minimum limit (VSMIN) (< PssSK.vsmax). Typical value = -0.4." . a rdfs:Class; rdfs:label "PssSTAB2A"@en; rdfs:subClassOf ; rdfs:comment """Power system stabilizer part of an ABB excitation system. [Footnote: ABB excitation systems are an example of suitable products available commercially. This information is given for the convenience of users of this document and does not constitute an endorsement by IEC of these products.]"""; ; . a rdf:Property; ; rdfs:label "k2"@en; rdfs:domain ; ; ; rdfs:comment "Gain (K2). Typical value = 1,0." . a rdf:Property; ; rdfs:label "k3"@en; rdfs:domain ; ; ; rdfs:comment "Gain (K3). Typical value = 0,25." . a rdf:Property; ; rdfs:label "k4"@en; rdfs:domain ; ; ; rdfs:comment "Gain (K4). Typical value = 0,075." . a rdf:Property; ; rdfs:label "k5"@en; rdfs:domain ; ; ; rdfs:comment "Gain (K5). Typical value = 2,5." . a rdf:Property; ; rdfs:label "t2"@en; rdfs:domain ; ; ; rdfs:comment "Time constant (T2). Typical value = 4,0." . a rdf:Property; ; rdfs:label "t3"@en; rdfs:domain ; ; ; rdfs:comment "Time constant (T3). Typical value = 2,0." . a rdf:Property; ; rdfs:label "t5"@en; rdfs:domain ; ; ; rdfs:comment "Time constant (T5). Typical value = 4,5." . a rdf:Property; ; rdfs:label "hlim"@en; rdfs:domain ; ; ; rdfs:comment "Stabilizer output limiter (HLIM). Typical value = 0,5." . a rdfs:Class; rdfs:label "PssWECC"@en; rdfs:subClassOf ; rdfs:comment "Dual input power system stabilizer, based on IEEE type 2, with modified output limiter defined by WECC (Western Electricity Coordinating Council, USA)."; ; . a rdf:Property; ; rdfs:label "inputSignal1Type"@en; rdfs:domain ; rdfs:range ; ; rdfs:comment "Type of input signal #1 (rotorAngularFrequencyDeviation, busFrequencyDeviation, generatorElectricalPower, generatorAcceleratingPower, busVoltage, or busVoltageDerivative - shall be different than PssWECC.inputSignal2Type). Typical value = rotorAngularFrequencyDeviation." . a rdf:Property; ; rdfs:label "inputSignal2Type"@en; rdfs:domain ; rdfs:range ; ; rdfs:comment "Type of input signal #2 (rotorAngularFrequencyDeviation, busFrequencyDeviation, generatorElectricalPower, generatorAcceleratingPower, busVoltage, busVoltageDerivative - shall be different than PssWECC.inputSignal1Type). Typical value = busVoltageDerivative." . a rdf:Property; ; rdfs:label "k1"@en; rdfs:domain ; ; ; rdfs:comment "Input signal 1 gain (K1). Typical value = 1,13. " . a rdf:Property; ; rdfs:label "t1"@en; rdfs:domain ; ; ; rdfs:comment "Input signal 1 transducer time constant (T1) (>= 0). Typical value = 0,037." . a rdf:Property; ; rdfs:label "k2"@en; rdfs:domain ; ; ; rdfs:comment "Input signal 2 gain (K2). Typical value = 0,0." . a rdf:Property; ; rdfs:label "t2"@en; rdfs:domain ; ; ; rdfs:comment "Input signal 2 transducer time constant (T2) (>= 0). Typical value = 0,0." . a rdf:Property; ; rdfs:label "t3"@en; rdfs:domain ; ; ; rdfs:comment "Stabilizer washout time constant (T3) (>= 0). Typical value = 9,5." . a rdf:Property; ; rdfs:label "t4"@en; rdfs:domain ; ; ; rdfs:comment "Stabilizer washout time lag constant (T4) (>= 0). Typical value = 9,5." . a rdf:Property; ; rdfs:label "t5"@en; rdfs:domain ; ; ; rdfs:comment "Lead time constant (T5) (>= 0). Typical value = 1,7." . a rdf:Property; ; rdfs:label "t6"@en; rdfs:domain ; ; ; rdfs:comment "Lag time constant (T6) (>= 0). Typical value = 1,5." . a rdf:Property; ; rdfs:label "t7"@en; rdfs:domain ; ; ; rdfs:comment "Lead time constant (T7) (>= 0). Typical value = 1,7." . a rdf:Property; ; rdfs:label "t8"@en; rdfs:domain ; ; ; rdfs:comment "Lag time constant (T8) (>= 0). Typical value = 1,5." . a rdf:Property; ; rdfs:label "t10"@en; rdfs:domain ; ; ; rdfs:comment "Lag time constant (T10) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "t9"@en; rdfs:domain ; ; ; rdfs:comment "Lead time constant (T9) (>= 0). Typical value = 0." . a rdf:Property; ; rdfs:label "vsmax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum output signal (Vsmax) (> PssWECC.vsmin). Typical value = 0,05." . a rdf:Property; ; rdfs:label "vsmin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum output signal (Vsmin) (< PssWECC.vsmax). Typical value = -0,05." . a rdf:Property; ; rdfs:label "vcu"@en; rdfs:domain ; ; ; rdfs:comment "Maximum value for voltage compensator output (VCU). Typical value = 0." . a rdf:Property; ; rdfs:label "vcl"@en; rdfs:domain ; ; ; rdfs:comment "Minimum value for voltage compensator output (VCL). Typical value = 0." . a ; rdfs:label "DiscontinuousExcitationControlDynamics"@en; rdfs:comment """In certain system configurations, continuous excitation control with terminal voltage and power system stabilizing regulator input signals does not ensure that the potential of the excitation system for improving system stability is fully exploited. For these situations, discontinuous excitation control signals can be employed to enhance stability following large transient disturbances. For additional information please refer to IEEE 421.5-2005, 12.""" . a rdfs:Class; rdfs:label "DiscontinuousExcitationControlDynamics"@en; rdfs:subClassOf ; rdfs:comment "Discontinuous excitation control function block whose behaviour is described by reference to a standard model or by definition of a user-defined model."; . a rdfs:Class; rdfs:label "DiscExcContIEEEDEC1A"@en; rdfs:subClassOf ; rdfs:comment """IEEE type DEC1A discontinuous excitation control model that boosts generator excitation to a level higher than that demanded by the voltage regulator and stabilizer immediately following a system fault. Reference: IEEE 421.5-2005, 12.2. """; ; . a rdf:Property; ; rdfs:label "vtlmt"@en; rdfs:domain ; ; ; rdfs:comment "Voltage reference (VTLMT). Typical value = 1,1." . a rdf:Property; ; rdfs:label "vomax"@en; rdfs:domain ; ; ; rdfs:comment "Limiter (VOMAX) (> DiscExcContIEEEDEC1A.vomin). Typical value = 0,3." . a rdf:Property; ; rdfs:label "vomin"@en; rdfs:domain ; ; ; rdfs:comment "Limiter (VOMIN) (< DiscExcContIEEEDEC1A.vomax). Typical value = 0,1." . a rdf:Property; ; rdfs:label "ketl"@en; rdfs:domain ; ; ; rdfs:comment "Terminal voltage limiter gain (KETL). Typical value = 47." . a rdf:Property; ; rdfs:label "vtc"@en; rdfs:domain ; ; ; rdfs:comment "Terminal voltage level reference (VTC). Typical value = 0,95." . a rdf:Property; ; rdfs:label "val"@en; rdfs:domain ; ; ; rdfs:comment "Regulator voltage reference (VAL). Typical value = 5,5." . a rdf:Property; ; rdfs:label "esc"@en; rdfs:domain ; ; ; rdfs:comment "Speed change reference (ESC). Typical value = 0,0015." . a rdf:Property; ; rdfs:label "kan"@en; rdfs:domain ; ; ; rdfs:comment "Discontinuous controller gain (KAN). Typical value = 400." . a rdf:Property; ; rdfs:label "tan"@en; rdfs:domain ; ; ; rdfs:comment "Discontinuous controller time constant (TAN) (>= 0). Typical value = 0,08." . a rdf:Property; ; rdfs:label "tw5"@en; rdfs:domain ; ; ; rdfs:comment "DEC washout time constant (TW5) (>= 0). Typical value = 5." . a rdf:Property; ; rdfs:label "vsmax"@en; rdfs:domain ; ; ; rdfs:comment "Limiter (VSMAX)(> DiscExcContIEEEDEC1A.vsmin). Typical value = 0,2." . a rdf:Property; ; rdfs:label "vsmin"@en; rdfs:domain ; ; ; rdfs:comment "Limiter (VSMIN) (< DiscExcContIEEEDEC1A.vsmax). Typical value = -0,066." . a rdf:Property; ; rdfs:label "td"@en; rdfs:domain ; ; ; rdfs:comment "Time constant (TD) (>= 0). Typical value = 0,03." . a rdf:Property; ; rdfs:label "tl1"@en; rdfs:domain ; ; ; rdfs:comment "Time constant (TL1) (>= 0). Typical value = 0,025." . a rdf:Property; ; rdfs:label "tl2"@en; rdfs:domain ; ; ; rdfs:comment "Time constant (TL2) (>= 0). Typical value = 1,25." . a rdf:Property; ; rdfs:label "vtm"@en; rdfs:domain ; ; ; rdfs:comment "Voltage limits (VTM). Typical value = 1,13." . a rdf:Property; ; rdfs:label "vtn"@en; rdfs:domain ; ; ; rdfs:comment "Voltage limits (VTN). Typical value = 1,12." . a rdf:Property; ; rdfs:label "vanmax"@en; rdfs:domain ; ; ; rdfs:comment "Limiter for Van (VANMAX)." . a rdfs:Class; rdfs:label "DiscExcContIEEEDEC2A"@en; rdfs:subClassOf ; rdfs:comment """IEEE type DEC2A model for discontinuous excitation control. This system provides transient excitation boosting via an open-loop control as initiated by a trigger signal generated remotely. Reference: IEEE 421.5-2005 12.3. """; ; . a rdf:Property; ; rdfs:label "vk"@en; rdfs:domain ; ; ; rdfs:comment "Discontinuous controller input reference (VK). " . a rdf:Property; ; rdfs:label "td1"@en; rdfs:domain ; ; ; rdfs:comment "Discontinuous controller time constant (TD1) (>= 0). " . a rdf:Property; ; rdfs:label "td2"@en; rdfs:domain ; ; ; rdfs:comment "Discontinuous controller washout time constant (TD2) (>= 0). " . a rdf:Property; ; rdfs:label "vdmin"@en; rdfs:domain ; ; ; rdfs:comment "Limiter (VDMIN) (< DiscExcContIEEEDEC2A.vdmax). " . a rdf:Property; ; rdfs:label "vdmax"@en; rdfs:domain ; ; ; rdfs:comment "Limiter (VDMAX) (> DiscExcContIEEEDEC2A.vdmin). " . a rdfs:Class; rdfs:label "DiscExcContIEEEDEC3A"@en; rdfs:subClassOf ; rdfs:comment """IEEE type DEC3A model. In some systems, the stabilizer output is disconnected from the regulator immediately following a severe fault to prevent the stabilizer from competing with action of voltage regulator during the first swing. Reference: IEEE 421.5-2005 12.4. """; ; . a rdf:Property; ; rdfs:label "vtmin"@en; rdfs:domain ; ; ; rdfs:comment "Terminal undervoltage comparison level (VTMIN). " . a rdf:Property; ; rdfs:label "tdr"@en; rdfs:domain ; ; ; rdfs:comment "Reset time delay (TDR) (>= 0). " . a ; rdfs:label "PFVArControllerType1Dynamics"@en; rdfs:comment """Excitation systems for synchronous machines are sometimes supplied with an optional means of automatically adjusting generator output reactive power (VAr) or power factor (PF) to a user-specified value. This can be accomplished with either a reactive power or power factor controller or regulator. A reactive power or power factor controller is defined as a PF/VAr controller in IEEE 421.1 as “a control function that acts through the reference adjuster to modify the voltage regulator set point to maintain the synchronous machine steady-state power factor or reactive power at a predetermined value.” For additional information please refer to IEEE 421.5-2005, 11.""" . a rdfs:Class; rdfs:label "PFVArControllerType1Dynamics"@en; rdfs:subClassOf ; rdfs:comment "Power factor or VAr controller type 1 function block whose behaviour is described by reference to a standard model or by definition of a user-defined model."; . a rdf:Property; rdfs:label "PFVArControllerType1Dynamics"@en; rdfs:comment "Power factor or VAr controller type 1 model with which this voltage adjuster is associated."; rdfs:domain ; rdfs:range ; ; ; "Yes" . a rdf:Property; rdfs:label "VoltageAdjusterDynamics"@en; rdfs:comment "Voltage adjuster model associated with this power factor or VAr controller type 1 model."; rdfs:domain ; rdfs:range ; ; ; "No" . a rdfs:Class; rdfs:label "PFVArType1IEEEPFController"@en; rdfs:subClassOf ; rdfs:comment """IEEE PF controller type 1 which operates by moving the voltage reference directly. Reference: IEEE 421.5-2005, 11.2. """; ; . a rdf:Property; ; rdfs:label "ovex"@en; rdfs:domain ; ; ; rdfs:comment """Overexcitation Flag (OVEX) true = overexcited false = underexcited.""" . a rdf:Property; ; rdfs:label "tpfc"@en; rdfs:domain ; ; ; rdfs:comment "PF controller time delay (TPFC) (>= 0). Typical value = 5." . a rdf:Property; ; rdfs:label "vitmin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum machine terminal current needed to enable pf/var controller (VITMIN)." . a rdf:Property; ; rdfs:label "vpf"@en; rdfs:domain ; ; ; rdfs:comment "Synchronous machine power factor (VPF)." . a rdf:Property; ; rdfs:label "vpfcbw"@en; rdfs:domain ; ; ; rdfs:comment "PF controller deadband (VPFC_BW). Typical value = 0,05." . a rdf:Property; ; rdfs:label "vpfref"@en; rdfs:domain ; ; ; rdfs:comment "PF controller reference (VPFREF)." . a rdf:Property; ; rdfs:label "vvtmax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum machine terminal voltage needed for pf/var controller to be enabled (VVTMAX) (> PFVArType1IEEEPFController.vvtmin)." . a rdf:Property; ; rdfs:label "vvtmin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum machine terminal voltage needed to enable pf/var controller (VVTMIN) (< PFVArType1IEEEPFController.vvtmax)." . a rdfs:Class; rdfs:label "PFVArType1IEEEVArController"@en; rdfs:subClassOf ; rdfs:comment """IEEE VAR controller type 1 which operates by moving the voltage reference directly. Reference: IEEE 421.5-2005, 11.3."""; ; . a rdf:Property; ; rdfs:label "tvarc"@en; rdfs:domain ; ; ; rdfs:comment "Var controller time delay (TVARC) (>= 0). Typical value = 5." . a rdf:Property; ; rdfs:label "vvar"@en; rdfs:domain ; ; ; rdfs:comment "Synchronous machine power factor (VVAR)." . a rdf:Property; ; rdfs:label "vvarcbw"@en; rdfs:domain ; ; ; rdfs:comment "Var controller deadband (VVARC_BW). Typical value = 0,02." . a rdf:Property; ; rdfs:label "vvarref"@en; rdfs:domain ; ; ; rdfs:comment "Var controller reference (VVARREF)." . a rdf:Property; ; rdfs:label "vvtmax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum machine terminal voltage needed for pf/VAr controller to be enabled (VVTMAX) (> PVFArType1IEEEVArController.vvtmin)." . a rdf:Property; ; rdfs:label "vvtmin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum machine terminal voltage needed to enable pf/var controller (VVTMIN) (< PVFArType1IEEEVArController.vvtmax)." . a ; rdfs:label "VoltageAdjusterDynamics"@en; rdfs:comment """A voltage adjuster is a reference adjuster that uses inputs from a reactive power or power factor controller to modify the voltage regulator set point to maintain the synchronous machine steady-state power factor or reactive power at a predetermined value. For additional information please refer to IEEE 421.5-2005, 11.""" . a rdfs:Class; rdfs:label "VoltageAdjusterDynamics"@en; rdfs:subClassOf ; rdfs:comment "Voltage adjuster function block whose behaviour is described by reference to a standard model or by definition of a user-defined model."; . a rdfs:Class; rdfs:label "VAdjIEEE"@en; rdfs:subClassOf ; rdfs:comment """IEEE voltage adjuster which is used to represent the voltage adjuster in either a power factor or VAr control system. Reference: IEEE 421.5-2005, 11.1."""; ; . a rdf:Property; ; rdfs:label "vadjf"@en; rdfs:domain ; ; ; rdfs:comment "Set high to provide a continuous raise or lower (VADJF)." . a rdf:Property; ; rdfs:label "adjslew"@en; rdfs:domain ; ; ; rdfs:comment "Rate at which output of adjuster changes (ADJ_SLEW). Unit = s / PU. Typical value = 300." . a rdf:Property; ; rdfs:label "vadjmax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum output of the adjuster (VADJMAX) (> VAdjIEEE.vadjmin). Typical value = 1,1." . a rdf:Property; ; rdfs:label "vadjmin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum output of the adjuster (VADJMIN) (< VAdjIEEE.vadjmax). Typical value = 0,9." . a rdf:Property; ; rdfs:label "taon"@en; rdfs:domain ; ; ; rdfs:comment "Time that adjuster pulses are on (TAON) (>= 0). Typical value = 0,1." . a rdf:Property; ; rdfs:label "taoff"@en; rdfs:domain ; ; ; rdfs:comment "Time that adjuster pulses are off (TAOFF) (>= 0). Typical value = 0,5." . a ; rdfs:label "PFVArControllerType2Dynamics"@en; rdfs:comment """A var/pf regulator is defined as “a synchronous machine regulator that functions to maintain the power factor or reactive component of power at a predetermined value.” For additional information please refer to IEEE 421.5-2005, 11. """ . a rdfs:Class; rdfs:label "PFVArControllerType2Dynamics"@en; rdfs:subClassOf ; rdfs:comment "Power factor or VAr controller type 2 function block whose behaviour is described by reference to a standard model or by definition of a user-defined model."; . a rdfs:Class; rdfs:label "PFVArType2IEEEPFController"@en; rdfs:subClassOf ; rdfs:comment """IEEE PF controller type 2 which is a summing point type controller making up the outside loop of a two-loop system. This controller is implemented as a slow PI type controller. The voltage regulator forms the inner loop and is implemented as a fast controller. Reference: IEEE 421.5-2005, 11.4. """; ; . a rdf:Property; ; rdfs:label "pfref"@en; rdfs:domain ; ; ; rdfs:comment "Power factor reference (PFREF)." . a rdf:Property; ; rdfs:label "vref"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator reference (VREF)." . a rdf:Property; ; rdfs:label "vclmt"@en; rdfs:domain ; ; ; rdfs:comment "Maximum output of the pf controller (VCLMT). Typical value = 0,1." . a rdf:Property; ; rdfs:label "kp"@en; rdfs:domain ; ; ; rdfs:comment "Proportional gain of the pf controller (KP). Typical value = 1." . a rdf:Property; ; rdfs:label "ki"@en; rdfs:domain ; ; ; rdfs:comment "Integral gain of the pf controller (KI). Typical value = 1." . a rdf:Property; ; rdfs:label "vs"@en; rdfs:domain ; ; ; rdfs:comment "Generator sensing voltage (VS)." . a rdf:Property; ; rdfs:label "exlon"@en; rdfs:domain ; ; ; rdfs:comment """Overexcitation or under excitation flag (EXLON) true = 1 (not in the overexcitation or underexcitation state, integral action is active) false = 0 (in the overexcitation or underexcitation state, so integral action is disabled to allow the limiter to play its role).""" . a rdfs:Class; rdfs:label "PFVArType2IEEEVArController"@en; rdfs:subClassOf ; rdfs:comment """IEEE VAR controller type 2 which is a summing point type controller. It makes up the outside loop of a two-loop system. This controller is implemented as a slow PI type controller, and the voltage regulator forms the inner loop and is implemented as a fast controller. Reference: IEEE 421.5-2005, 11.5."""; ; . a rdf:Property; ; rdfs:label "qref"@en; rdfs:domain ; ; ; rdfs:comment "Reactive power reference (QREF). " . a rdf:Property; ; rdfs:label "vref"@en; rdfs:domain ; ; ; rdfs:comment "Voltage regulator reference (VREF)." . a rdf:Property; ; rdfs:label "vclmt"@en; rdfs:domain ; ; ; rdfs:comment "Maximum output of the pf controller (VCLMT)." . a rdf:Property; ; rdfs:label "kp"@en; rdfs:domain ; ; ; rdfs:comment "Proportional gain of the pf controller (KP)." . a rdf:Property; ; rdfs:label "ki"@en; rdfs:domain ; ; ; rdfs:comment "Integral gain of the pf controller (KI)." . a rdf:Property; ; rdfs:label "vs"@en; rdfs:domain ; ; ; rdfs:comment "Generator sensing voltage (VS)." . a rdf:Property; ; rdfs:label "exlon"@en; rdfs:domain ; ; ; rdfs:comment """Overexcitation or under excitation flag (EXLON) true = 1 (not in the overexcitation or underexcitation state, integral action is active) false = 0 (in the overexcitation or underexcitation state, so integral action is disabled to allow the limiter to play its role).""" . a rdfs:Class; rdfs:label "PFVArType2Common1"@en; rdfs:subClassOf ; rdfs:comment """Power factor / reactive power regulator. This model represents the power factor or reactive power controller such as the Basler SCP-250. The controller measures power factor or reactive power (PU on generator rated power) and compares it with the operator's set point. [Footnote: Basler SCP-250 is an example of a suitable product available commercially. This information is given for the convenience of users of this document and does not constitute an endorsement by IEC of this product.]"""; ; . a rdf:Property; ; rdfs:label "j"@en; rdfs:domain ; ; ; rdfs:comment """Selector (J). true = control mode for reactive power false = control mode for power factor.""" . a rdf:Property; ; rdfs:label "kp"@en; rdfs:domain ; ; ; rdfs:comment "Proportional gain (Kp)." . a rdf:Property; ; rdfs:label "ki"@en; rdfs:domain ; ; ; rdfs:comment "Reset gain (Ki)." . a rdf:Property; ; rdfs:label "max"@en; rdfs:domain ; ; ; rdfs:comment "Output limit (max)." . a rdf:Property; ; rdfs:label "ref"@en; rdfs:domain ; ; ; rdfs:comment """Reference value of reactive power or power factor (Ref). The reference value is initialised by this model. This initialisation can override the value exchanged by this attribute to represent a plant operator's change of the reference setting.""" . a ; rdfs:label "VoltageCompensatorDynamics"@en; rdfs:comment """Synchronous machine terminal voltage transducer and current compensator models adjust the terminal voltage feedback to the excitation system by adding a quantity that is proportional to the terminal current of the generator. It is linked to a specific generator (synchronous machine). Several types of compensation are available on most excitation systems. Synchronous machine active and reactive current compensation are the most common. Either reactive droop compensation and/or line-drop compensation can be used, simulating an impedance drop and effectively regulating at some point other than the terminals of the machine. The impedance or range of adjustment and type of compensation should be specified for different types. Care shall be taken to ensure that a consistent PU system is utilized for the compensator parameters and the synchronous machine current base. For further information see IEEE 421.5-2005, 4. """ . a rdfs:Class; rdfs:label "VoltageCompensatorDynamics"@en; rdfs:subClassOf ; rdfs:comment "Voltage compensator function block whose behaviour is described by reference to a standard model or by definition of a user-defined model."; . a rdfs:Class; rdfs:label "VCompIEEEType1"@en; rdfs:subClassOf ; rdfs:comment """Terminal voltage transducer and load compensator as defined in IEEE 421.5-2005, 4. This model is common to all excitation system models described in the IEEE Standard. Parameter details:
  1. If Rc and Xc are set to zero, the load compensation is not employed and the behaviour is as a simple sensing circuit.
  1. If all parameters (Rc, Xc and Tr) are set to zero, the standard model VCompIEEEType1 is bypassed.
Reference: IEEE 421.5-2005 4. """; ; . a rdf:Property; ; rdfs:label "rc"@en; rdfs:domain ; ; ; rdfs:comment "Resistive component of compensation of a generator (Rc) (>= 0)." . a rdf:Property; ; rdfs:label "xc"@en; rdfs:domain ; ; ; rdfs:comment "Reactive component of compensation of a generator (Xc) (>= 0)." . a rdf:Property; ; rdfs:label "tr"@en; rdfs:domain ; ; ; rdfs:comment "Time constant which is used for the combined voltage sensing and compensation signal (Tr) (>= 0)." . a rdfs:Class; rdfs:label "VCompIEEEType2"@en; rdfs:subClassOf ; rdfs:comment """Terminal voltage transducer and load compensator as defined in IEEE 421.5-2005, 4. This model is designed to cover the following types of compensation:
  • reactive droop;
  • transformer-drop or line-drop compensation;
  • reactive differential compensation known also as cross-current compensation.
Reference: IEEE 421.5-2005, 4."""; ; . a rdf:Property; ; rdfs:label "tr"@en; rdfs:domain ; ; ; rdfs:comment "Time constant which is used for the combined voltage sensing and compensation signal (Tr) (>= 0)." . a rdf:Property; rdfs:label "VcompIEEEType2"@en; rdfs:comment "The standard IEEE type 2 voltage compensator of this compensation."; rdfs:domain ; rdfs:range ; ; ; "Yes" . a rdf:Property; rdfs:label "GenICompensationForGenJ"@en; rdfs:comment "Compensation of this voltage compensator's generator for current flow out of another generator."; rdfs:domain ; rdfs:range ; ; ; "No" . a rdfs:Class; rdfs:label "GenICompensationForGenJ"@en; rdfs:subClassOf ; rdfs:comment "Resistive and reactive components of compensation for generator associated with IEEE type 2 voltage compensator for current flow out of another generator in the interconnection."; ; . a rdf:Property; ; rdfs:label "rcij"@en; rdfs:domain ; ; ; rdfs:comment "Resistive component of compensation of generator associated with this IEEE type 2 voltage compensator for current flow out of another generator (Rcij)." . a rdf:Property; ; rdfs:label "xcij"@en; rdfs:domain ; ; ; rdfs:comment "Reactive component of compensation of generator associated with this IEEE type 2 voltage compensator for current flow out of another generator (Xcij)." . a ; rdfs:label "WindDynamics"@en; rdfs:comment """Wind turbines are generally divided into four types, which are currently significant in power systems. The four types have the following characteristics: - type 1: wind turbine with directly grid connected asynchronous generator with fixed rotor resistance (typically squirrel cage); - type 2: wind turbine with directly grid connected asynchronous generator with variable rotor resistance; - type 3: wind turbines with doubly-fed asynchronous generators (directly connected stator and rotor connected through power converter); - type 4: wind turbines connected to the grid through a full size power converter. Models included in this package are according to IEC 61400-27-1:2015.""" . a rdfs:Class; rdfs:label "WindAeroConstIEC"@en; rdfs:subClassOf ; rdfs:comment """Constant aerodynamic torque model which assumes that the aerodynamic torque is constant. Reference: IEC 61400-27-1:2015, 5.6.1.1."""; ; . a rdf:Property; rdfs:label "WindAeroConstIEC"@en; rdfs:comment "Wind aerodynamic model associated with this wind turbine type 1A model."; rdfs:domain ; rdfs:range ; ; ; "Yes" . a rdf:Property; rdfs:label "WindGenTurbineType1aIEC"@en; rdfs:comment "Wind turbine type 1A model with which this wind aerodynamic model is associated."; rdfs:domain ; rdfs:range ; ; ; "No" . a rdfs:Class; rdfs:label "WindAeroOneDimIEC"@en; rdfs:subClassOf ; rdfs:comment """One-dimensional aerodynamic model. Reference: IEC 61400-27-1:2015, 5.6.1.2."""; ; . a rdf:Property; ; rdfs:label "ka"@en; rdfs:domain ; ; ; rdfs:comment "Aerodynamic gain (ka). It is a type-dependent parameter." . a rdf:Property; ; rdfs:label "thetaomega"@en; rdfs:domain ; ; ; rdfs:comment "Initial pitch angle (thetaomega0). It is a case-dependent parameter." . a rdf:Property; rdfs:label "WindAeroOneDimIEC"@en; rdfs:comment "Wind aerodynamic model associated with this wind generator type 3 model."; rdfs:domain ; rdfs:range ; ; ; "Yes" . a rdf:Property; rdfs:label "WindTurbineType3IEC"@en; rdfs:comment "Wind turbine type 3 model with which this wind aerodynamic model is associated."; rdfs:domain ; rdfs:range ; ; ; "No" . a rdfs:Class; rdfs:label "WindAeroTwoDimIEC"@en; rdfs:subClassOf ; rdfs:comment """Two-dimensional aerodynamic model. Reference: IEC 61400-27-1:2015, 5.6.1.3."""; ; . a rdf:Property; ; rdfs:label "dpomega"@en; rdfs:domain ; ; ; rdfs:comment "Partial derivative of aerodynamic power with respect to changes in WTR speed (dpomega). It is a type-dependent parameter." . a rdf:Property; ; rdfs:label "dptheta"@en; rdfs:domain ; ; ; rdfs:comment "Partial derivative of aerodynamic power with respect to changes in pitch angle (dptheta). It is a type-dependent parameter." . a rdf:Property; ; rdfs:label "dpv1"@en; rdfs:domain ; ; ; rdfs:comment "Partial derivative (dpv1). It is a type-dependent parameter." . ; rdfs:label "omegazero"@en; rdfs:domain ; ; ; a rdf:Property; rdfs:comment "Rotor speed if the wind turbine is not derated (omega0). It is a type-dependent parameter." . a rdf:Property; ; rdfs:label "pavail"@en; rdfs:domain ; ; ; rdfs:comment "Available aerodynamic power (pavail). It is a case-dependent parameter." . a rdf:Property; ; rdfs:label "thetazero"@en; rdfs:domain ; ; ; rdfs:comment "Pitch angle if the wind turbine is not derated (theta0). It is a case-dependent parameter." . a rdf:Property; ; rdfs:label "thetav2"@en; rdfs:domain ; ; ; rdfs:comment "Blade angle at twice rated wind speed (thetav2). It is a type-dependent parameter." . a rdf:Property; rdfs:label "WindAeroTwoDimIEC"@en; rdfs:comment "Wind aerodynamic model associated with this wind turbine type 3 model."; rdfs:domain ; rdfs:range ; ; ; "Yes" . a rdf:Property; rdfs:label "WindTurbineType3IEC"@en; rdfs:comment "Wind turbine type 3 model with which this wind aerodynamic model is associated."; rdfs:domain ; rdfs:range ; ; ; "No" . a rdfs:Class; rdfs:label "WindContCurrLimIEC"@en; rdfs:subClassOf ; rdfs:comment """Current limitation model. The current limitation model combines the physical limits and the control limits. Reference: IEC 61400-27-1:2015, 5.6.5.8."""; ; . a rdf:Property; ; rdfs:label "imax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum continuous current at the wind turbine terminals (imax). It is a type-dependent parameter." . a rdf:Property; ; rdfs:label "imaxdip"@en; rdfs:domain ; ; ; rdfs:comment "Maximum current during voltage dip at the wind turbine terminals (imaxdip). It is a project-dependent parameter." . a rdf:Property; ; rdfs:label "kpqu"@en; rdfs:domain ; ; ; rdfs:comment "Partial derivative of reactive current limit (Kpqu) versus voltage. It is a type-dependent parameter." . a rdf:Property; ; rdfs:label "mdfslim"@en; rdfs:domain ; ; ; rdfs:comment """Limitation of type 3 stator current (MDFSLim). MDFSLim = 1 for wind turbines type 4. It is a type-dependent parameter. false= total current limitation (0 in the IEC model) true=stator current limitation (1 in the IEC model).""" . a rdf:Property; ; rdfs:label "mqpri"@en; rdfs:domain ; ; ; rdfs:comment """Prioritisation of Q control during UVRT (Mqpri). It is a project-dependent parameter. true = reactive power priority (1 in the IEC model) false = active power priority (0 in the IEC model).""" . a rdf:Property; ; rdfs:label "tufiltcl"@en; rdfs:domain ; ; ; rdfs:comment "Voltage measurement filter time constant (Tufiltcl) (>= 0). It is a type-dependent parameter." . a rdf:Property; ; rdfs:label "upqumax"@en; rdfs:domain ; ; ; rdfs:comment "Wind turbine voltage in the operation point where zero reactive current can be delivered (upqumax). It is a type-dependent parameter." . a rdf:Property; rdfs:label "WindTurbineType3or4IEC"@en; rdfs:comment "Wind turbine type 3 or type 4 model with which this wind control current limitation model is associated."; rdfs:domain ; rdfs:range ; ; ; "No" . a rdf:Property; rdfs:label "WindContCurrLimIEC"@en; rdfs:comment "Wind control current limitation model associated with this wind turbine type 3 or type 4 model."; rdfs:domain ; rdfs:range ; ; ; "Yes" . a rdf:Property; rdfs:label "WindDynamicsLookupTable"@en; rdfs:comment "The wind dynamics lookup table associated with this current control limitation model."; rdfs:domain ; rdfs:range ; ; ; "No" . a rdf:Property; rdfs:label "WindContCurrLimIEC"@en; rdfs:comment "The current control limitation model with which this wind dynamics lookup table is associated."; rdfs:domain ; rdfs:range ; ; ; "Yes" . a rdfs:Class; rdfs:label "WindContPitchAngleIEC"@en; rdfs:subClassOf ; rdfs:comment """Pitch angle control model. Reference: IEC 61400-27-1:2015, 5.6.5.2."""; ; . a rdf:Property; ; rdfs:label "dthetamax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum pitch positive ramp rate (dthetamax) (> WindContPitchAngleIEC.dthetamin). It is a type-dependent parameter. Unit = degrees / s. " . a rdf:Property; ; rdfs:label "dthetamin"@en; rdfs:domain ; ; ; rdfs:comment "Maximum pitch negative ramp rate (dthetamin) (< WindContPitchAngleIEC.dthetamax). It is a type-dependent parameter. Unit = degrees / s. " . a rdf:Property; ; rdfs:label "kic"@en; rdfs:domain ; ; ; rdfs:comment "Power PI controller integration gain (KIc). It is a type-dependent parameter." . a rdf:Property; ; rdfs:label "kiomega"@en; rdfs:domain ; ; ; rdfs:comment "Speed PI controller integration gain (KIomega). It is a type-dependent parameter." . a rdf:Property; ; rdfs:label "kpc"@en; rdfs:domain ; ; ; rdfs:comment "Power PI controller proportional gain (KPc). It is a type-dependent parameter." . a rdf:Property; ; rdfs:label "kpomega"@en; rdfs:domain ; ; ; rdfs:comment "Speed PI controller proportional gain (KPomega). It is a type-dependent parameter." . a rdf:Property; ; rdfs:label "kpx"@en; rdfs:domain ; ; ; rdfs:comment "Pitch cross coupling gain (KPX). It is a type-dependent parameter." . a rdf:Property; ; rdfs:label "thetamax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum pitch angle (thetamax) (> WindContPitchAngleIEC.thetamin). It is a type-dependent parameter." . a rdf:Property; ; rdfs:label "thetamin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum pitch angle (thetamin) (< WindContPitchAngleIEC.thetamax). It is a type-dependent parameter." . a rdf:Property; ; rdfs:label "ttheta"@en; rdfs:domain ; ; ; rdfs:comment "Pitch time constant (ttheta) (>= 0). It is a type-dependent parameter." . a rdf:Property; rdfs:label "WindContPitchAngleIEC"@en; rdfs:comment "Wind control pitch angle model associated with this wind turbine type 3."; rdfs:domain ; rdfs:range ; ; ; "Yes" . a rdf:Property; rdfs:label "WindTurbineType3IEC"@en; rdfs:comment "Wind turbine type 3 model with which this pitch control model is associated."; rdfs:domain ; rdfs:range ; ; ; "No" . a rdfs:Class; rdfs:label "WindContPType3IEC"@en; rdfs:subClassOf ; rdfs:comment """P control model type 3. Reference: IEC 61400-27-1:2015, 5.6.5.4."""; ; . a rdf:Property; ; rdfs:label "dpmax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum wind turbine power ramp rate (dpmax). It is a type-dependent parameter." . a rdf:Property; ; rdfs:label "dprefmax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum ramp rate of wind turbine reference power (dprefmax). It is a project-dependent parameter." . a rdf:Property; ; rdfs:label "dprefmin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum ramp rate of wind turbine reference power (dprefmin). It is a project-dependent parameter." . a rdf:Property; ; rdfs:label "dthetamax"@en; rdfs:domain ; ; ; rdfs:comment "Ramp limitation of torque, required in some grid codes (dtmax). It is a project-dependent parameter." . a rdf:Property; ; rdfs:label "dthetamaxuvrt"@en; rdfs:domain ; ; ; rdfs:comment "Limitation of torque rise rate during UVRT (dthetamaxUVRT). It is a project-dependent parameter." . a rdf:Property; ; rdfs:label "kdtd"@en; rdfs:domain ; ; ; rdfs:comment "Gain for active drive train damping (KDTD). It is a type-dependent parameter." . a rdf:Property; ; rdfs:label "kip"@en; rdfs:domain ; ; ; rdfs:comment "PI controller integration parameter (KIp). It is a type-dependent parameter." . a rdf:Property; ; rdfs:label "kpp"@en; rdfs:domain ; ; ; rdfs:comment "PI controller proportional gain (KPp). It is a type-dependent parameter." . a rdf:Property; ; rdfs:label "mpuvrt"@en; rdfs:domain ; ; ; rdfs:comment """Enable UVRT power control mode (MpUVRT). It is a project-dependent parameter. true = voltage control (1 in the IEC model) false = reactive power control (0 in the IEC model).""" . a rdf:Property; ; rdfs:label "omegaoffset"@en; rdfs:domain ; ; ; rdfs:comment "Offset to reference value that limits controller action during rotor speed changes (omegaoffset). It is a case-dependent parameter." . a rdf:Property; ; rdfs:label "pdtdmax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum active drive train damping power (pDTDmax). It is a type-dependent parameter." . a rdf:Property; ; rdfs:label "tdvs"@en; rdfs:domain ; ; ; rdfs:comment "Time delay after deep voltage sags (TDVS) (>= 0). It is a project-dependent parameter." . a rdf:Property; ; rdfs:label "thetaemin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum electrical generator torque (temin). It is a type-dependent parameter." . a rdf:Property; ; rdfs:label "thetauscale"@en; rdfs:domain ; ; ; rdfs:comment "Voltage scaling factor of reset-torque (tuscale). It is a project-dependent parameter." . a rdf:Property; ; rdfs:label "tomegafiltp3"@en; rdfs:domain ; ; ; rdfs:comment "Filter time constant for generator speed measurement (Tomegafiltp3) (>= 0). It is a type-dependent parameter." . a rdf:Property; ; rdfs:label "tpfiltp3"@en; rdfs:domain ; ; ; rdfs:comment "Filter time constant for power measurement (Tpfiltp3) (>= 0). It is a type-dependent parameter." . a rdf:Property; ; rdfs:label "tpord"@en; rdfs:domain ; ; ; rdfs:comment "Time constant in power order lag (Tpord). It is a type-dependent parameter." . a rdf:Property; ; rdfs:label "tufiltp3"@en; rdfs:domain ; ; ; rdfs:comment "Filter time constant for voltage measurement (Tufiltp3) (>= 0). It is a type-dependent parameter." . a rdf:Property; ; rdfs:label "tomegaref"@en; rdfs:domain ; ; ; rdfs:comment "Time constant in speed reference filter (Tomega,ref) (>= 0). It is a type-dependent parameter." . a rdf:Property; ; rdfs:label "udvs"@en; rdfs:domain ; ; ; rdfs:comment "Voltage limit for hold UVRT status after deep voltage sags (uDVS). It is a project-dependent parameter." . a rdf:Property; ; rdfs:label "updip"@en; rdfs:domain ; ; ; rdfs:comment "Voltage dip threshold for P-control (uPdip). Part of turbine control, often different (e.g 0.8) from converter thresholds. It is a project-dependent parameter." . a rdf:Property; ; rdfs:label "omegadtd"@en; rdfs:domain ; ; ; rdfs:comment "Active drive train damping frequency (omegaDTD). It can be calculated from two mass model parameters. It is a type-dependent parameter." . a rdf:Property; ; rdfs:label "zeta"@en; rdfs:domain ; ; ; rdfs:comment "Coefficient for active drive train damping (zeta). It is a type-dependent parameter." . a rdf:Property; rdfs:label "WindContPType3IEC"@en; rdfs:comment "Wind control P type 3 model associated with this wind turbine type 3 model."; rdfs:domain ; rdfs:range ; ; ; "Yes" . a rdf:Property; rdfs:label "WindTurbineType3IEC"@en; rdfs:comment "Wind turbine type 3 model with which this wind control P type 3 model is associated."; rdfs:domain ; rdfs:range ; ; ; "No" . a rdf:Property; rdfs:label "WindDynamicsLookupTable"@en; rdfs:comment "The wind dynamics lookup table associated with this P control type 3 model."; rdfs:domain ; rdfs:range ; ; ; "No" . a rdf:Property; rdfs:label "WindContPType3IEC"@en; rdfs:comment "The P control type 3 model with which this wind dynamics lookup table is associated."; rdfs:domain ; rdfs:range ; ; ; "Yes" . a rdfs:Class; rdfs:label "WindContPType4aIEC"@en; rdfs:subClassOf ; rdfs:comment """P control model type 4A. Reference: IEC 61400-27-1:2015, 5.6.5.5."""; ; . a rdf:Property; ; rdfs:label "dpmaxp4a"@en; rdfs:domain ; ; ; rdfs:comment "Maximum wind turbine power ramp rate (dpmaxp4A). It is a project-dependent parameter." . a rdf:Property; ; rdfs:label "tpordp4a"@en; rdfs:domain ; ; ; rdfs:comment "Time constant in power order lag (Tpordp4A) (>= 0). It is a type-dependent parameter." . a rdf:Property; ; rdfs:label "tufiltp4a"@en; rdfs:domain ; ; ; rdfs:comment "Voltage measurement filter time constant (Tufiltp4A) (>= 0). It is a type-dependent parameter." . a rdf:Property; rdfs:label "WindTurbineType4aIEC"@en; rdfs:comment " Wind turbine type 4A model with which this wind control P type 4A model is associated."; rdfs:domain ; rdfs:range ; ; ; "No" . a rdf:Property; rdfs:label "WindContPType4aIEC"@en; rdfs:comment "Wind control P type 4A model associated with this wind turbine type 4A model."; rdfs:domain ; rdfs:range ; ; ; "Yes" . a rdfs:Class; rdfs:label "WindContPType4bIEC"@en; rdfs:subClassOf ; rdfs:comment """P control model type 4B. Reference: IEC 61400-27-1:2015, 5.6.5.6."""; ; . a rdf:Property; ; rdfs:label "dpmaxp4b"@en; rdfs:domain ; ; ; rdfs:comment "Maximum wind turbine power ramp rate (dpmaxp4B). It is a project-dependent parameter." . a rdf:Property; ; rdfs:label "tpaero"@en; rdfs:domain ; ; ; rdfs:comment "Time constant in aerodynamic power response (Tpaero) (>= 0). It is a type-dependent parameter." . a rdf:Property; ; rdfs:label "tpordp4b"@en; rdfs:domain ; ; ; rdfs:comment "Time constant in power order lag (Tpordp4B) (>= 0). It is a type-dependent parameter." . a rdf:Property; ; rdfs:label "tufiltp4b"@en; rdfs:domain ; ; ; rdfs:comment "Voltage measurement filter time constant (Tufiltp4B) (>= 0). It is a type-dependent parameter." . a rdf:Property; rdfs:label "WindTurbineType4bIEC"@en; rdfs:comment "Wind turbine type 4B model with which this wind control P type 4B model is associated."; rdfs:domain ; rdfs:range ; ; ; "No" . a rdf:Property; rdfs:label "WindContPType4bIEC"@en; rdfs:comment "Wind control P type 4B model associated with this wind turbine type 4B model."; rdfs:domain ; rdfs:range ; ; ; "Yes" . a rdfs:Class; rdfs:label "WindContQIEC"@en; rdfs:subClassOf ; rdfs:comment """Q control model. Reference: IEC 61400-27-1:2015, 5.6.5.7."""; ; . a rdf:Property; ; rdfs:label "iqh1"@en; rdfs:domain ; ; ; rdfs:comment "Maximum reactive current injection during dip (iqh1). It is a type-dependent parameter." . a rdf:Property; ; rdfs:label "iqmax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum reactive current injection (iqmax) (> WindContQIEC.iqmin). It is a type-dependent parameter." . a rdf:Property; ; rdfs:label "iqmin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum reactive current injection (iqmin) (< WindContQIEC.iqmax). It is a type-dependent parameter." . a rdf:Property; ; rdfs:label "iqpost"@en; rdfs:domain ; ; ; rdfs:comment "Post fault reactive current injection (iqpost). It is a project-dependent parameter." . a rdf:Property; ; rdfs:label "kiq"@en; rdfs:domain ; ; ; rdfs:comment "Reactive power PI controller integration gain (KI,q). It is a type-dependent parameter." . a rdf:Property; ; rdfs:label "kiu"@en; rdfs:domain ; ; ; rdfs:comment "Voltage PI controller integration gain (KI,u). It is a type-dependent parameter." . a rdf:Property; ; rdfs:label "kpq"@en; rdfs:domain ; ; ; rdfs:comment "Reactive power PI controller proportional gain (KP,q). It is a type-dependent parameter." . a rdf:Property; ; rdfs:label "kpu"@en; rdfs:domain ; ; ; rdfs:comment "Voltage PI controller proportional gain (KP,u). It is a type-dependent parameter." . a rdf:Property; ; rdfs:label "kqv"@en; rdfs:domain ; ; ; rdfs:comment "Voltage scaling factor for UVRT current (Kqv). It is a project-dependent parameter." . a rdf:Property; ; rdfs:label "tpfiltq"@en; rdfs:domain ; ; ; rdfs:comment "Power measurement filter time constant (Tpfiltq) (>= 0). It is a type-dependent parameter." . a rdf:Property; ; rdfs:label "rdroop"@en; rdfs:domain ; ; ; rdfs:comment "Resistive component of voltage drop impedance (rdroop) (>= 0). It is a project-dependent parameter." . a rdf:Property; ; rdfs:label "tufiltq"@en; rdfs:domain ; ; ; rdfs:comment "Voltage measurement filter time constant (Tufiltq) (>= 0). It is a type-dependent parameter." . a rdf:Property; ; rdfs:label "tpost"@en; rdfs:domain ; ; ; rdfs:comment "Length of time period where post fault reactive power is injected (Tpost) (>= 0). It is a project-dependent parameter." . a rdf:Property; ; rdfs:label "tqord"@en; rdfs:domain ; ; ; rdfs:comment "Time constant in reactive power order lag (Tqord) (>= 0). It is a type-dependent parameter." . a rdf:Property; ; rdfs:label "udb1"@en; rdfs:domain ; ; ; rdfs:comment "Voltage deadband lower limit (udb1). It is a type-dependent parameter." . a rdf:Property; ; rdfs:label "udb2"@en; rdfs:domain ; ; ; rdfs:comment "Voltage deadband upper limit (udb2). It is a type-dependent parameter." . a rdf:Property; ; rdfs:label "umax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum voltage in voltage PI controller integral term (umax) (> WindContQIEC.umin). It is a type-dependent parameter." . a rdf:Property; ; rdfs:label "umin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum voltage in voltage PI controller integral term (umin) (< WindContQIEC.umax). It is a type-dependent parameter." . a rdf:Property; ; rdfs:label "uqdip"@en; rdfs:domain ; ; ; rdfs:comment "Voltage threshold for UVRT detection in Q control (uqdip). It is a type-dependent parameter." . a rdf:Property; ; rdfs:label "uref0"@en; rdfs:domain ; ; ; rdfs:comment "User-defined bias in voltage reference (uref0). It is a case-dependent parameter." . a rdf:Property; ; rdfs:label "windQcontrolModesType"@en; rdfs:domain ; rdfs:range ; ; rdfs:comment "Types of general wind turbine Q control modes (MqG). It is a project-dependent parameter." . a rdf:Property; ; rdfs:label "windUVRTQcontrolModesType"@en; rdfs:domain ; rdfs:range ; ; rdfs:comment "Types of UVRT Q control modes (MqUVRT). It is a project-dependent parameter." . a rdf:Property; ; rdfs:label "xdroop"@en; rdfs:domain ; ; ; rdfs:comment "Inductive component of voltage drop impedance (xdroop) (>= 0). It is a project-dependent parameter." . a rdf:Property; rdfs:label "WindTurbineType3or4IEC"@en; rdfs:comment "Wind turbine type 3 or type 4 model with which this reactive control model is associated."; rdfs:domain ; rdfs:range ; ; ; "No" . a rdf:Property; rdfs:label "WIndContQIEC"@en; rdfs:comment "Wind control Q model associated with this wind turbine type 3 or type 4 model."; rdfs:domain ; rdfs:range ; ; ; "Yes" . a rdfs:Class; rdfs:label "WindContQLimIEC"@en; rdfs:subClassOf ; rdfs:comment """Constant Q limitation model. Reference: IEC 61400-27-1:2015, 5.6.5.9."""; ; . a rdf:Property; ; rdfs:label "qmax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum reactive power (qmax) (> WindContQLimIEC.qmin). It is a type-dependent parameter." . a rdf:Property; ; rdfs:label "qmin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum reactive power (qmin) (< WindContQLimIEC.qmax). It is a type-dependent parameter." . a rdf:Property; rdfs:label "WindTurbineType3or4IEC"@en; rdfs:comment "Wind generator type 3 or type 4 model with which this constant Q limitation model is associated."; rdfs:domain ; rdfs:range ; ; ; "No" . a rdf:Property; rdfs:label "WindContQLimIEC"@en; rdfs:comment "Constant Q limitation model associated with this wind generator type 3 or type 4 model."; rdfs:domain ; rdfs:range ; ; ; "Yes" . a rdfs:Class; rdfs:label "WindContQPQULimIEC"@en; rdfs:subClassOf ; rdfs:comment """QP and QU limitation model. Reference: IEC 61400-27-1:2015, 5.6.5.10."""; ; . a rdf:Property; ; rdfs:label "tpfiltql"@en; rdfs:domain ; ; ; rdfs:comment "Power measurement filter time constant for Q capacity (Tpfiltql) (>= 0). It is a type-dependent parameter." . a rdf:Property; ; rdfs:label "tufiltql"@en; rdfs:domain ; ; ; rdfs:comment "Voltage measurement filter time constant for Q capacity (Tufiltql) (>= 0). It is a type-dependent parameter." . a rdf:Property; rdfs:label "WindTurbineType3or4IEC"@en; rdfs:comment "Wind generator type 3 or type 4 model with which this QP and QU limitation model is associated."; rdfs:domain ; rdfs:range ; ; ; "No" . a rdf:Property; rdfs:label "WindContQPQULimIEC"@en; rdfs:comment "QP and QU limitation model associated with this wind generator type 3 or type 4 model."; rdfs:domain ; rdfs:range ; ; ; "Yes" . a rdf:Property; rdfs:label "WindDynamicsLookupTable"@en; rdfs:comment "The wind dynamics lookup table associated with this QP and QU limitation model."; rdfs:domain ; rdfs:range ; ; ; "No" . a rdf:Property; rdfs:label "WindContQPQULimIEC"@en; rdfs:comment "The QP and QU limitation model with which this wind dynamics lookup table is associated."; rdfs:domain ; rdfs:range ; ; ; "Yes" . a rdfs:Class; rdfs:label "WindContRotorRIEC"@en; rdfs:subClassOf ; rdfs:comment """Rotor resistance control model. Reference: IEC 61400-27-1:2015, 5.6.5.3."""; ; . a rdf:Property; ; rdfs:label "kirr"@en; rdfs:domain ; ; ; rdfs:comment "Integral gain in rotor resistance PI controller (KIrr). It is a type-dependent parameter." . a rdf:Property; ; rdfs:label "komegafilt"@en; rdfs:domain ; ; ; rdfs:comment "Filter gain for generator speed measurement (Komegafilt). It is a type-dependent parameter." . a rdf:Property; ; rdfs:label "kpfilt"@en; rdfs:domain ; ; ; rdfs:comment "Filter gain for power measurement (Kpfilt). It is a type-dependent parameter." . a rdf:Property; ; rdfs:label "kprr"@en; rdfs:domain ; ; ; rdfs:comment "Proportional gain in rotor resistance PI controller (KPrr). It is a type-dependent parameter." . a rdf:Property; ; rdfs:label "rmax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum rotor resistance (rmax) (> WindContRotorRIEC.rmin). It is a type-dependent parameter." . a rdf:Property; ; rdfs:label "rmin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum rotor resistance (rmin) (< WindContRotorRIEC.rmax). It is a type-dependent parameter." . a rdf:Property; ; rdfs:label "tomegafiltrr"@en; rdfs:domain ; ; ; rdfs:comment "Filter time constant for generator speed measurement (Tomegafiltrr) (>= 0). It is a type-dependent parameter." . a rdf:Property; ; rdfs:label "tpfiltrr"@en; rdfs:domain ; ; ; rdfs:comment "Filter time constant for power measurement (Tpfiltrr) (>= 0). It is a type-dependent parameter." . a rdf:Property; rdfs:label "WindContRotorRIEC"@en; rdfs:comment "The rotor resistance control model with which this wind dynamics lookup table is associated."; rdfs:domain ; rdfs:range ; ; ; "Yes" . a rdf:Property; rdfs:label "WindDynamicsLookupTable"@en; rdfs:comment "The wind dynamics lookup table associated with this rotor resistance control model."; rdfs:domain ; rdfs:range ; ; ; "No" . a rdf:Property; rdfs:label "WindGenTurbineType2IEC"@en; rdfs:comment "Wind turbine type 2 model with whitch this wind control rotor resistance model is associated."; rdfs:domain ; rdfs:range ; ; ; "No" . a rdf:Property; rdfs:label "WindContRotorRIEC"@en; rdfs:comment "Wind control rotor resistance model associated with wind turbine type 2 model."; rdfs:domain ; rdfs:range ; ; ; "Yes" . a rdfs:Class; rdfs:label "WindDynamicsLookupTable"@en; rdfs:subClassOf ; rdfs:comment "Look up table for the purpose of wind standard models."; ; . a rdf:Property; ; rdfs:label "input"@en; rdfs:domain ; ; ; rdfs:comment "Input value (x) for the lookup table function." . a rdf:Property; ; rdfs:label "lookupTableFunctionType"@en; rdfs:domain ; rdfs:range ; ; rdfs:comment "Type of the lookup table function." . a rdf:Property; ; rdfs:label "output"@en; rdfs:domain ; ; ; rdfs:comment "Output value (y) for the lookup table function." . a rdf:Property; ; rdfs:label "sequence"@en; rdfs:domain ; ; ; rdfs:comment "Sequence numbers of the pairs of the input (x) and the output (y) of the lookup table function." . a rdf:Property; rdfs:label "WindDynamicsLookupTable"@en; rdfs:comment "The wind dynamics lookup table associated with this frequency and active power wind plant model."; rdfs:domain ; rdfs:range ; ; ; "No" . a rdf:Property; rdfs:label "WindPlantFreqPcontrolIEC"@en; rdfs:comment "The frequency and active power wind plant control model with which this wind dynamics lookup table is associated."; rdfs:domain ; rdfs:range ; ; ; "Yes" . a rdf:Property; rdfs:label "WindDynamicsLookupTable"@en; rdfs:comment "The wind dynamics lookup table associated with this grid protection model."; rdfs:domain ; rdfs:range ; ; ; "No" . a rdf:Property; rdfs:label "WindProtectionIEC"@en; rdfs:comment "The grid protection model with which this wind dynamics lookup table is associated."; rdfs:domain ; rdfs:range ; ; ; "Yes" . a rdf:Property; rdfs:label "WindDynamicsLookupTable"@en; rdfs:comment "The wind dynamics lookup table associated with this voltage and reactive power wind plant model."; rdfs:domain ; rdfs:range ; ; ; "No" . a rdf:Property; rdfs:label "WindPlantReactiveControlIEC"@en; rdfs:comment "The voltage and reactive power wind plant control model with which this wind dynamics lookup table is associated."; rdfs:domain ; rdfs:range ; ; ; "Yes" . a rdf:Property; rdfs:label "WindDynamicsLookupTable"@en; rdfs:comment "The wind dynamics lookup table associated with this generator type 3B model."; rdfs:domain ; rdfs:range ; ; ; "No" . a rdf:Property; rdfs:label "WindGenType3bIEC"@en; rdfs:comment "The generator type 3B model with which this wind dynamics lookup table is associated."; rdfs:domain ; rdfs:range ; ; ; "Yes" . a rdf:Property; rdfs:label "WindPitchContPowerIEC"@en; rdfs:comment "The pitch control power model with which this wind dynamics lookup table is associated."; rdfs:domain ; rdfs:range ; ; ; "Yes" . a rdf:Property; rdfs:label "WindDynamicsLookupTable"@en; rdfs:comment "The wind dynamics lookup table associated with this pitch control power model."; rdfs:domain ; rdfs:range ; ; ; "No" . a rdfs:Class; rdfs:label "WindGenTurbineType1aIEC"@en; rdfs:subClassOf ; rdfs:comment """Wind turbine IEC type 1A. Reference: IEC 61400-27-1:2015, 5.5.2.2."""; ; . rdfs:label "WindGenTurbineType1bIEC"@en; rdfs:subClassOf ; rdfs:comment """Wind turbine IEC type 1B. Reference: IEC 61400-27-1:2015, 5.5.2.3."""; ; ; a rdfs:Class . a rdf:Property; rdfs:label "WindGenTurbineType1bIEC"@en; rdfs:comment "Wind turbine type 1B model with which this pitch control power model is associated."; rdfs:domain ; rdfs:range ; ; ; "No" . a rdf:Property; rdfs:label "WindPitchContPowerIEC"@en; rdfs:comment "Pitch control power model associated with this wind turbine type 1B model."; rdfs:domain ; rdfs:range ; ; ; "Yes" . a rdfs:Class; rdfs:label "WindGenTurbineType2IEC"@en; rdfs:subClassOf ; rdfs:comment """Wind turbine IEC type 2. Reference: IEC 61400-27-1:2015, 5.5.3."""; ; . a rdf:Property; rdfs:label "WindGenTurbineType2IEC"@en; rdfs:comment "Wind turbine type 2 model with which this pitch control power model is associated."; rdfs:domain ; rdfs:range ; ; ; "No" . a rdf:Property; rdfs:label "WindPitchContPowerIEC"@en; rdfs:comment "Pitch control power model associated with this wind turbine type 2 model."; rdfs:domain ; rdfs:range ; ; ; "Yes" . a rdfs:Class; rdfs:label "WindGenType3aIEC"@en; rdfs:subClassOf ; rdfs:comment """IEC type 3A generator set model. Reference: IEC 61400-27-1:2015, 5.6.3.2."""; ; . a rdf:Property; ; rdfs:label "kpc"@en; rdfs:domain ; ; ; rdfs:comment "Current PI controller proportional gain (KPc). It is a type-dependent parameter." . a rdf:Property; ; rdfs:label "tic"@en; rdfs:domain ; ; ; rdfs:comment "Current PI controller integration time constant (TIc) (>= 0). It is a type-dependent parameter." . a rdf:Property; rdfs:label "WindTurbineType4IEC"@en; rdfs:comment "Wind turbine type 4 model with which this wind generator type 3A model is associated."; rdfs:domain ; rdfs:range ; ; ; "No" . a rdf:Property; rdfs:label "WindGenType3aIEC"@en; rdfs:comment "Wind generator type 3A model associated with this wind turbine type 4 model."; rdfs:domain ; rdfs:range ; ; ; "Yes" . a rdfs:Class; rdfs:label "WindGenType3bIEC"@en; rdfs:subClassOf ; rdfs:comment """IEC type 3B generator set model. Reference: IEC 61400-27-1:2015, 5.6.3.3."""; ; . a rdf:Property; ; rdfs:label "mwtcwp"@en; rdfs:domain ; ; ; rdfs:comment """Crowbar control mode (MWTcwp). It is a case-dependent parameter. true = 1 in the IEC model false = 0 in the IEC model.""" . a rdf:Property; ; rdfs:label "tg"@en; rdfs:domain ; ; ; rdfs:comment "Current generation time constant (Tg) (>= 0). It is a type-dependent parameter." . a rdf:Property; ; rdfs:label "two"@en; rdfs:domain ; ; ; rdfs:comment "Time constant for crowbar washout filter (Two) (>= 0). It is a case-dependent parameter." . a rdfs:Class; rdfs:label "WindGenType3IEC"@en; rdfs:subClassOf ; rdfs:comment "Parent class supporting relationships to IEC wind turbines type 3 generator models of IEC type 3A and 3B."; . a rdf:Property; ; rdfs:label "dipmax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum active current ramp rate (dipmax). It is a project-dependent parameter." . a rdf:Property; ; rdfs:label "diqmax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum reactive current ramp rate (diqmax). It is a project-dependent parameter." . a rdf:Property; ; rdfs:label "xs"@en; rdfs:domain ; ; ; rdfs:comment "Electromagnetic transient reactance (xS). It is a type-dependent parameter." . a rdf:Property; rdfs:label "WindTurbineType3IEC"@en; rdfs:comment "Wind turbine type 3 model with which this wind generator type 3 is associated. "; rdfs:domain ; rdfs:range ; ; ; "No" . a rdf:Property; rdfs:label "WindGenType3IEC"@en; rdfs:comment "Wind generator type 3 model associated with this wind turbine type 3 model."; rdfs:domain ; rdfs:range ; ; ; "Yes" . a rdfs:Class; rdfs:label "WindGenType4IEC"@en; rdfs:subClassOf ; rdfs:comment """IEC type 4 generator set model. Reference: IEC 61400-27-1:2015, 5.6.3.4."""; ; . a rdf:Property; ; rdfs:label "dipmax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum active current ramp rate (dipmax). It is a project-dependent parameter." . a rdf:Property; ; rdfs:label "diqmin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum reactive current ramp rate (diqmin). It is a project-dependent parameter." . a rdf:Property; ; rdfs:label "diqmax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum reactive current ramp rate (diqmax). It is a project-dependent parameter." . a rdf:Property; ; rdfs:label "tg"@en; rdfs:domain ; ; ; rdfs:comment "Time constant (Tg) (>= 0). It is a type-dependent parameter." . a rdf:Property; rdfs:label "WindTurbineType4aIEC"@en; rdfs:comment "Wind turbine type 4A model with which this wind generator type 4 model is associated."; rdfs:domain ; rdfs:range ; ; ; "No" . a rdf:Property; rdfs:label "WindGenType4IEC"@en; rdfs:comment "Wind generator type 4 model associated with this wind turbine type 4A model."; rdfs:domain ; rdfs:range ; ; ; "Yes" . a rdf:Property; rdfs:label "WindTurbineType4bIEC"@en; rdfs:comment "Wind turbine type 4B model with which this wind generator type 4 model is associated."; rdfs:domain ; rdfs:range ; ; ; "No" . a rdf:Property; rdfs:label "WindGenType4IEC"@en; rdfs:comment "Wind generator type 4 model associated with this wind turbine type 4B model."; rdfs:domain ; rdfs:range ; ; ; "Yes" . a rdfs:Class; rdfs:label "WindMechIEC"@en; rdfs:subClassOf ; rdfs:comment """Two mass model. Reference: IEC 61400-27-1:2015, 5.6.2.1."""; ; . a rdf:Property; ; rdfs:label "cdrt"@en; rdfs:domain ; ; ; rdfs:comment "Drive train damping (cdrt). It is a type-dependent parameter." . a rdf:Property; ; rdfs:label "hgen"@en; rdfs:domain ; ; ; rdfs:comment "Inertia constant of generator (Hgen) (>= 0). It is a type-dependent parameter." . a rdf:Property; ; rdfs:label "hwtr"@en; rdfs:domain ; ; ; rdfs:comment "Inertia constant of wind turbine rotor (HWTR) (>= 0). It is a type-dependent parameter." . a rdf:Property; ; rdfs:label "kdrt"@en; rdfs:domain ; ; ; rdfs:comment "Drive train stiffness (kdrt). It is a type-dependent parameter." . a rdf:Property; rdfs:label "WindMechIEC"@en; rdfs:comment "Wind mechanical model associated with this wind turbine type 3 model."; rdfs:domain ; rdfs:range ; ; ; "Yes" . a rdf:Property; rdfs:label "WindTurbineType3IEC"@en; rdfs:comment "Wind turbine type 3 model with which this wind mechanical model is associated."; rdfs:domain ; rdfs:range ; ; ; "No" . a rdf:Property; rdfs:label "WindTurbineType1or2IEC"@en; rdfs:comment "Wind generator type 1 or type 2 model with which this wind mechanical model is associated."; rdfs:domain ; rdfs:range ; ; ; "No" . a rdf:Property; rdfs:label "WindMechIEC"@en; rdfs:comment "Wind mechanical model associated with this wind generator type 1 or type 2 model."; rdfs:domain ; rdfs:range ; ; ; "Yes" . a rdf:Property; rdfs:label "WindTurbineType4bIEC"@en; rdfs:comment "Wind turbine type 4B model with which this wind mechanical model is associated."; rdfs:domain ; rdfs:range ; ; ; "No" . a rdf:Property; rdfs:label "WindMechIEC"@en; rdfs:comment "Wind mechanical model associated with this wind turbine type 4B model."; rdfs:domain ; rdfs:range ; ; ; "Yes" . a rdfs:Class; rdfs:label "WindPitchContPowerIEC"@en; rdfs:subClassOf ; rdfs:comment """Pitch control power model. Reference: IEC 61400-27-1:2015, 5.6.5.1."""; ; . a rdf:Property; ; rdfs:label "dpmax"@en; rdfs:domain ; ; ; rdfs:comment "Rate limit for increasing power (dpmax) (> WindPitchContPowerIEC.dpmin). It is a type-dependent parameter." . a rdf:Property; ; rdfs:label "dpmin"@en; rdfs:domain ; ; ; rdfs:comment "Rate limit for decreasing power (dpmin) (< WindPitchContPowerIEC.dpmax). It is a type-dependent parameter." . a rdf:Property; ; rdfs:label "pmin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum power setting (pmin). It is a type-dependent parameter." . a rdf:Property; ; rdfs:label "pset"@en; rdfs:domain ; ; ; rdfs:comment "If pinit < pset then power will be ramped down to pmin. It is (pset) in the IEC 61400-27-1:2015. It is a type-dependent parameter." . a rdf:Property; ; rdfs:label "t1"@en; rdfs:domain ; ; ; rdfs:comment "Lag time constant (T1) (>= 0). It is a type-dependent parameter." . a rdf:Property; ; rdfs:label "tr"@en; rdfs:domain ; ; ; rdfs:comment "Voltage measurement time constant (Tr) (>= 0). It is a type-dependent parameter." . a rdf:Property; ; rdfs:label "uuvrt"@en; rdfs:domain ; ; ; rdfs:comment "Dip detection threshold (uUVRT). It is a type-dependent parameter." . a rdfs:Class; rdfs:label "WindPlantDynamics"@en; rdfs:subClassOf ; rdfs:comment "Parent class supporting relationships to wind turbines type 3 and type 4 and wind plant IEC and user-defined wind plants including their control models."; . a rdf:Property; rdfs:label "WindTurbineType3or4Dynamics"@en; rdfs:comment "The wind turbine type 3 or type 4 associated with this wind plant."; rdfs:domain ; rdfs:range ; ; ; "No" . a rdf:Property; rdfs:label "WindPlantDynamics"@en; rdfs:comment "The wind plant with which the wind turbines type 3 or type 4 are associated."; rdfs:domain ; rdfs:range ; ; ; "Yes" . a rdfs:Class; rdfs:label "WindPlantFreqPcontrolIEC"@en; rdfs:subClassOf ; rdfs:comment """Frequency and active power controller model. Reference: IEC 61400-27-1:2015, Annex D."""; ; . a rdf:Property; ; rdfs:label "dprefmax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum ramp rate of pWTref request from the plant controller to the wind turbines (dprefmax) (> WindPlantFreqPcontrolIEC.dprefmin). It is a case-dependent parameter." . a rdf:Property; ; rdfs:label "dprefmin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum (negative) ramp rate of pWTref request from the plant controller to the wind turbines (dprefmin) (< WindPlantFreqPcontrolIEC.dprefmax). It is a project-dependent parameter." . a rdf:Property; ; rdfs:label "dpwprefmax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum positive ramp rate for wind plant power reference (dpWPrefmax) (> WindPlantFreqPcontrolIEC.dpwprefmin). It is a project-dependent parameter." . a rdf:Property; ; rdfs:label "dpwprefmin"@en; rdfs:domain ; ; ; rdfs:comment "Maximum negative ramp rate for wind plant power reference (dpWPrefmin) (< WindPlantFreqPcontrolIEC.dpwprefmax). It is a project-dependent parameter." . a rdf:Property; ; rdfs:label "prefmax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum pWTref request from the plant controller to the wind turbines (prefmax) (> WindPlantFreqPcontrolIEC.prefmin). It is a project-dependent parameter." . a rdf:Property; ; rdfs:label "prefmin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum pWTref request from the plant controller to the wind turbines (prefmin) (< WindPlantFreqPcontrolIEC.prefmax). It is a project-dependent parameter." . a rdf:Property; ; rdfs:label "kiwpp"@en; rdfs:domain ; ; ; rdfs:comment "Plant P controller integral gain (KIWPp). It is a project-dependent parameter." . a rdf:Property; ; rdfs:label "kiwppmax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum PI integrator term (KIWPpmax) (> WindPlantFreqPcontrolIEC.kiwppmin). It is a project-dependent parameter." . a rdf:Property; ; rdfs:label "kiwppmin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum PI integrator term (KIWPpmin) (< WindPlantFreqPcontrolIEC.kiwppmax). It is a project-dependent parameter." . a rdf:Property; ; rdfs:label "kpwpp"@en; rdfs:domain ; ; ; rdfs:comment "Plant P controller proportional gain (KPWPp). It is a project-dependent parameter." . a rdf:Property; ; rdfs:label "kwppref"@en; rdfs:domain ; ; ; rdfs:comment "Power reference gain (KWPpref). It is a project-dependent parameter." . a rdf:Property; ; rdfs:label "tpft"@en; rdfs:domain ; ; ; rdfs:comment "Lead time constant in reference value transfer function (Tpft) (>= 0). It is a project-dependent parameter." . a rdf:Property; ; rdfs:label "tpfv"@en; rdfs:domain ; ; ; rdfs:comment "Lag time constant in reference value transfer function (Tpfv) (>= 0). It is a project-dependent parameter." . a rdf:Property; ; rdfs:label "twpffiltp"@en; rdfs:domain ; ; ; rdfs:comment "Filter time constant for frequency measurement (TWPffiltp) (>= 0). It is a project-dependent parameter." . a rdf:Property; ; rdfs:label "twppfiltp"@en; rdfs:domain ; ; ; rdfs:comment "Filter time constant for active power measurement (TWPpfiltp) (>= 0). It is a project-dependent parameter." . a rdf:Property; rdfs:label "WindPlantIEC"@en; rdfs:comment "Wind plant model with which this wind plant frequency and active power control is associated."; rdfs:domain ; rdfs:range ; ; ; "No" . a rdf:Property; rdfs:label "WindPlantFreqPcontrolIEC"@en; rdfs:comment "Wind plant frequency and active power control model associated with this wind plant."; rdfs:domain ; rdfs:range ; ; ; "Yes" . a rdfs:Class; rdfs:label "WindPlantIEC"@en; rdfs:subClassOf ; rdfs:comment """Simplified IEC type plant level model. Reference: IEC 61400-27-1:2015, Annex D."""; ; . a rdf:Property; rdfs:label "WindPlantIEC"@en; rdfs:comment "Wind plant reactive control model associated with this wind plant."; rdfs:domain ; rdfs:range ; ; ; "No" . a rdf:Property; rdfs:label "WindPlantReactiveControlIEC"@en; rdfs:comment "Wind plant model with which this wind reactive control is associated."; rdfs:domain ; rdfs:range ; ; ; "Yes" . a rdfs:Class; rdfs:label "WindPlantReactiveControlIEC"@en; rdfs:subClassOf ; rdfs:comment """Simplified plant voltage and reactive power control model for use with type 3 and type 4 wind turbine models. Reference: IEC 61400-27-1:2015, Annex D."""; ; . a rdf:Property; ; rdfs:label "dxrefmax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum positive ramp rate for wind turbine reactive power/voltage reference (dxrefmax) (> WindPlantReactiveControlIEC.dxrefmin). It is a project-dependent parameter." . a rdf:Property; ; rdfs:label "dxrefmin"@en; rdfs:domain ; ; ; rdfs:comment "Maximum negative ramp rate for wind turbine reactive power/voltage reference (dxrefmin) (< WindPlantReactiveControlIEC.dxrefmax). It is a project-dependent parameter." . a rdf:Property; ; rdfs:label "kiwpx"@en; rdfs:domain ; ; ; rdfs:comment "Plant Q controller integral gain (KIWPx). It is a project-dependent parameter." . a rdf:Property; ; rdfs:label "kiwpxmax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum reactive power/voltage reference from integration (KIWPxmax) (> WindPlantReactiveControlIEC.kiwpxmin). It is a project-dependent parameter." . a rdf:Property; ; rdfs:label "kiwpxmin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum reactive power/voltage reference from integration (KIWPxmin) (< WindPlantReactiveControlIEC.kiwpxmax). It is a project-dependent parameter." . a rdf:Property; ; rdfs:label "kpwpx"@en; rdfs:domain ; ; ; rdfs:comment "Plant Q controller proportional gain (KPWPx). It is a project-dependent parameter." . a rdf:Property; ; rdfs:label "kwpqref"@en; rdfs:domain ; ; ; rdfs:comment "Reactive power reference gain (KWPqref). It is a project-dependent parameter." . a rdf:Property; ; rdfs:label "kwpqu"@en; rdfs:domain ; ; ; rdfs:comment "Plant voltage control droop (KWPqu). It is a project-dependent parameter." . a rdf:Property; ; rdfs:label "tuqfilt"@en; rdfs:domain ; ; ; rdfs:comment "Filter time constant for voltage-dependent reactive power (Tuqfilt) (>= 0). It is a project-dependent parameter." . a rdf:Property; ; rdfs:label "twppfiltq"@en; rdfs:domain ; ; ; rdfs:comment "Filter time constant for active power measurement (TWPpfiltq) (>= 0). It is a project-dependent parameter." . a rdf:Property; ; rdfs:label "twpqfiltq"@en; rdfs:domain ; ; ; rdfs:comment "Filter time constant for reactive power measurement (TWPqfiltq) (>= 0). It is a project-dependent parameter." . a rdf:Property; ; rdfs:label "twpufiltq"@en; rdfs:domain ; ; ; rdfs:comment "Filter time constant for voltage measurement (TWPufiltq) (>= 0). It is a project-dependent parameter." . a rdf:Property; ; rdfs:label "txft"@en; rdfs:domain ; ; ; rdfs:comment "Lead time constant in reference value transfer function (Txft) (>= 0). It is a project-dependent parameter." . a rdf:Property; ; rdfs:label "txfv"@en; rdfs:domain ; ; ; rdfs:comment "Lag time constant in reference value transfer function (Txfv) (>= 0). It is a project-dependent parameter." . a rdf:Property; ; rdfs:label "uwpqdip"@en; rdfs:domain ; ; ; rdfs:comment "Voltage threshold for UVRT detection in Q control (uWPqdip). It is a project-dependent parameter." . a rdf:Property; ; rdfs:label "windPlantQcontrolModesType"@en; rdfs:domain ; rdfs:range ; ; rdfs:comment "Reactive power/voltage controller mode (MWPqmode). It is a case-dependent parameter." . a rdf:Property; ; rdfs:label "xrefmax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum xWTref (qWTref or delta uWTref) request from the plant controller (xrefmax) (> WindPlantReactiveControlIEC.xrefmin). It is a case-dependent parameter." . a rdf:Property; ; rdfs:label "xrefmin"@en; rdfs:domain ; ; ; rdfs:comment "Minimum xWTref (qWTref or delta uWTref) request from the plant controller (xrefmin) (< WindPlantReactiveControlIEC.xrefmax). It is a project-dependent parameter." . a rdfs:Class; rdfs:label "WindProtectionIEC"@en; rdfs:subClassOf ; rdfs:comment """The grid protection model includes protection against over- and under-voltage, and against over- and under-frequency. Reference: IEC 61400-27-1:2015, 5.6.6."""; ; . a rdf:Property; ; rdfs:label "dfimax"@en; rdfs:domain ; ; ; rdfs:comment "Maximum rate of change of frequency (dFmax). It is a type-dependent parameter." . a rdf:Property; ; rdfs:label "fover"@en; rdfs:domain ; ; ; rdfs:comment "Wind turbine over frequency protection activation threshold (fover). It is a project-dependent parameter. " . a rdf:Property; ; rdfs:label "funder"@en; rdfs:domain ; ; ; rdfs:comment "Wind turbine under frequency protection activation threshold (funder). It is a project-dependent parameter." . a rdf:Property; ; rdfs:label "mzc"@en; rdfs:domain ; ; ; rdfs:comment """Zero crossing measurement mode (Mzc). It is a type-dependent parameter. true = WT protection system uses zero crossings to detect frequency (1 in the IEC model) false = WT protection system does not use zero crossings to detect frequency (0 in the IEC model).""" . a rdf:Property; ; rdfs:label "tfma"@en; rdfs:domain ; ; ; rdfs:comment "Time interval of moving average window (TfMA) (>= 0). It is a type-dependent parameter." . a rdf:Property; ; rdfs:label "uover"@en; rdfs:domain ; ; ; rdfs:comment "Wind turbine over voltage protection activation threshold (uover). It is a project-dependent parameter." . a rdf:Property; ; rdfs:label "uunder"@en; rdfs:domain ; ; ; rdfs:comment "Wind turbine under voltage protection activation threshold (uunder). It is a project-dependent parameter." . a rdf:Property; rdfs:label "WindTurbineType3or4IEC"@en; rdfs:comment "Wind generator type 3 or type 4 model with which this wind turbine protection model is associated."; rdfs:domain ; rdfs:range ; ; ; "No" . a rdf:Property; rdfs:label "WindProtectionIEC"@en; rdfs:comment "Wind turbune protection model associated with this wind generator type 3 or type 4 model."; rdfs:domain ; rdfs:range ; ; ; "Yes" . a rdf:Property; rdfs:label "WindTurbineType1or2IEC"@en; rdfs:comment "Wind generator type 1 or type 2 model with which this wind turbine protection model is associated."; rdfs:domain ; rdfs:range ; ; ; "No" . a rdf:Property; rdfs:label "WindProtectionIEC"@en; rdfs:comment "Wind turbune protection model associated with this wind generator type 1 or type 2 model."; rdfs:domain ; rdfs:range ; ; ; "Yes" . a rdfs:Class; rdfs:label "WindRefFrameRotIEC"@en; rdfs:subClassOf ; rdfs:comment """Reference frame rotation model. Reference: IEC 61400-27-1:2015, 5.6.3.5."""; ; . a rdf:Property; ; rdfs:label "tpll"@en; rdfs:domain ; ; ; rdfs:comment "Time constant for PLL first order filter model (TPLL) (>= 0). It is a type-dependent parameter." . a rdf:Property; ; rdfs:label "upll1"@en; rdfs:domain ; ; ; rdfs:comment "Voltage below which the angle of the voltage is filtered and possibly also frozen (uPLL1). It is a type-dependent parameter." . a rdf:Property; ; rdfs:label "upll2"@en; rdfs:domain ; ; ; rdfs:comment "Voltage (uPLL2) below which the angle of the voltage is frozen if uPLL2 is smaller or equal to uPLL1 . It is a type-dependent parameter." . a rdf:Property; rdfs:label "WindTurbineType3or4IEC"@en; rdfs:comment "Wind turbine type 3 or type 4 model with which this reference frame rotation model is associated."; rdfs:domain ; rdfs:range ; ; ; "No" . a rdf:Property; rdfs:label "WindRefFrameRotIEC"@en; rdfs:comment "Reference frame rotation model associated with this wind turbine type 3 or type 4 model."; rdfs:domain ; rdfs:range ; ; ; "Yes" . a rdfs:Class; rdfs:label "WindTurbineType1or2Dynamics"@en; rdfs:subClassOf ; rdfs:comment "Parent class supporting relationships to wind turbines type 1 and type 2 and their control models. Generator model for wind turbine of type 1 or type 2 is a standard asynchronous generator model."; . a rdfs:Class; rdfs:label "WindTurbineType1or2IEC"@en; rdfs:subClassOf ; rdfs:comment """Parent class supporting relationships to IEC wind turbines type 1 and type 2 including their control models. Generator model for wind turbine of IEC type 1 or type 2 is a standard asynchronous generator model. Reference: IEC 61400-27-1:2015, 5.5.2 and 5.5.3."""; . a rdfs:Class; rdfs:label "WindTurbineType3IEC"@en; rdfs:subClassOf ; rdfs:comment "Parent class supporting relationships to IEC wind turbines type 3 including their control models."; ; . a rdfs:Class; rdfs:label "WindTurbineType3or4Dynamics"@en; rdfs:subClassOf ; rdfs:comment "Parent class supporting relationships to wind turbines type 3 and type 4 and wind plant including their control models."; . a rdfs:Class; rdfs:label "WindTurbineType3or4IEC"@en; rdfs:subClassOf ; rdfs:comment "Parent class supporting relationships to IEC wind turbines type 3 and type 4 including their control models."; . a rdfs:Class; rdfs:label "WindTurbineType4aIEC"@en; rdfs:subClassOf ; rdfs:comment """Wind turbine IEC type 4A. Reference: IEC 61400-27-1:2015, 5.5.5.2."""; ; . a rdfs:Class; rdfs:label "WindTurbineType4bIEC"@en; rdfs:subClassOf ; rdfs:comment """Wind turbine IEC type 4B. Reference: IEC 61400-27-1:2015, 5.5.5.3."""; ; . a rdfs:Class; rdfs:label "WindTurbineType4IEC"@en; rdfs:subClassOf ; rdfs:comment "Parent class supporting relationships to IEC wind turbines type 4 including their control models."; . a ; rdfs:label "LoadDynamics"@en; rdfs:comment """Dynamic load models are used to represent the dynamic real and reactive load behaviour of a load from the static power flow model. Dynamic load models can be defined as applying either to a single load (energy consumer) or to a group of energy consumers. Large industrial motors or groups of similar motors can be represented by a synchronous machine model (SynchronousMachineDynamics) or an asynchronous machine model (AsynchronousMachineDynamics), which are usually represented as generators with negative active power output in the static (power flow) data. """ . a rdfs:Class; rdfs:label "LoadComposite"@en; rdfs:subClassOf ; rdfs:comment """Combined static load and induction motor load effects. The dynamics of the motor are simplified by linearizing the induction machine equations."""; ; . a rdf:Property; ; rdfs:label "epvs"@en; rdfs:domain ; ; ; rdfs:comment "Active load-voltage dependence index (static) (Epvs). Typical value = 0,7." . a rdf:Property; ; rdfs:label "epfs"@en; rdfs:domain ; ; ; rdfs:comment "Active load-frequency dependence index (static) (Epfs). Typical value = 1,5." . a rdf:Property; ; rdfs:label "eqvs"@en; rdfs:domain ; ; ; rdfs:comment "Reactive load-voltage dependence index (static) (Eqvs). Typical value = 2." . a rdf:Property; ; rdfs:label "eqfs"@en; rdfs:domain ; ; ; rdfs:comment "Reactive load-frequency dependence index (static) (Eqfs). Typical value = 0." . a rdf:Property; ; rdfs:label "epvd"@en; rdfs:domain ; ; ; rdfs:comment "Active load-voltage dependence index (dynamic) (Epvd). Typical value = 0,7." . a rdf:Property; ; rdfs:label "epfd"@en; rdfs:domain ; ; ; rdfs:comment "Active load-frequency dependence index (dynamic) (Epfd). Typical value = 1,5." . a rdf:Property; ; rdfs:label "eqvd"@en; rdfs:domain ; ; ; rdfs:comment "Reactive load-voltage dependence index (dynamic) (Eqvd). Typical value = 2." . a rdf:Property; ; rdfs:label "eqfd"@en; rdfs:domain ; ; ; rdfs:comment "Reactive load-frequency dependence index (dynamic) (Eqfd). Typical value = 0." . a rdf:Property; ; rdfs:label "lfac"@en; rdfs:domain ; ; ; rdfs:comment "Loading factor (Lfac). The ratio of initial P to motor MVA base. Typical value = 0,8." . a rdf:Property; ; rdfs:label "h"@en; rdfs:domain ; ; ; rdfs:comment "Inertia constant (H) (>= 0). Typical value = 2,5." . a rdf:Property; ; rdfs:label "pfrac"@en; rdfs:domain ; ; ; rdfs:comment "Fraction of constant-power load to be represented by this motor model (PFRAC) (>= 0,0 and <= 1,0). Typical value = 0,5." . a rdfs:Class; rdfs:label "LoadGenericNonLinear"@en; rdfs:subClassOf ; rdfs:comment "Generic non-linear dynamic (GNLD) load. This model can be used in mid-term and long-term voltage stability simulations (i.e., to study voltage collapse), as it can replace a more detailed representation of aggregate load, including induction motors, thermostatically controlled and static loads."; ; . a rdf:Property; ; rdfs:label "genericNonLinearLoadModelType"@en; rdfs:domain ; rdfs:range ; ; rdfs:comment "Type of generic non-linear load model." . a rdf:Property; ; rdfs:label "tp"@en; rdfs:domain ; ; ; rdfs:comment "Time constant of lag function of active power (TP) (> 0)." . a rdf:Property; ; rdfs:label "tq"@en; rdfs:domain ; ; ; rdfs:comment "Time constant of lag function of reactive power (TQ) (> 0)." . a rdf:Property; ; rdfs:label "ls"@en; rdfs:domain ; ; ; rdfs:comment "Steady state voltage index for active power (LS)." . a rdf:Property; ; rdfs:label "lt"@en; rdfs:domain ; ; ; rdfs:comment "Transient voltage index for active power (LT)." . a rdf:Property; ; rdfs:label "bs"@en; rdfs:domain ; ; ; rdfs:comment "Steady state voltage index for reactive power (BS)." . a rdf:Property; ; rdfs:label "bt"@en; rdfs:domain ; ; ; rdfs:comment "Transient voltage index for reactive power (BT)." . a rdfs:Class; rdfs:label "LoadDynamics"@en; rdfs:subClassOf ; rdfs:comment """Load whose behaviour is described by reference to a standard model or by definition of a user-defined model. A standard feature of dynamic load behaviour modelling is the ability to associate the same behaviour to multiple energy consumers by means of a single load definition. The load model is always applied to individual bus loads (energy consumers)."""; . a rdfs:Class; rdfs:label "LoadAggregate"@en; rdfs:subClassOf ; rdfs:comment """Aggregate loads are used to represent all or part of the real and reactive load from one or more loads in the static (power flow) data. This load is usually the aggregation of many individual load devices and the load model is an approximate representation of the aggregate response of the load devices to system disturbances. Standard aggregate load model comprised of static and/or dynamic components. A static load model represents the sensitivity of the real and reactive power consumed by the load to the amplitude and frequency of the bus voltage. A dynamic load model can be used to represent the aggregate response of the motor components of the load."""; ; . a rdf:Property; rdfs:label "LoadAggregate"@en; rdfs:comment "Aggregate load to which this aggregate motor (dynamic) load belongs."; rdfs:domain ; rdfs:range ; ; ; "Yes" . a rdf:Property; rdfs:label "LoadMotor"@en; rdfs:comment "Aggregate motor (dynamic) load associated with this aggregate load."; rdfs:domain ; rdfs:range ; ; ; "No" . a rdf:Property; rdfs:label "LoadAggregate"@en; rdfs:comment "Aggregate load to which this aggregate static load belongs."; rdfs:domain ; rdfs:range ; ; ; "Yes" . rdfs:label "LoadStatic"@en; rdfs:comment "Aggregate static load associated with this aggregate load."; a rdf:Property; rdfs:domain ; rdfs:range ; ; ; "No" . a rdfs:Class; rdfs:label "LoadStatic"@en; rdfs:subClassOf ; rdfs:comment "General static load. This model represents the sensitivity of the real and reactive power consumed by the load to the amplitude and frequency of the bus voltage."; ; . a rdf:Property; ; rdfs:label "staticLoadModelType"@en; rdfs:domain ; rdfs:range ; ; rdfs:comment "Type of static load model. Typical value = constantZ." . a rdf:Property; ; rdfs:label "kp1"@en; rdfs:domain ; ; ; rdfs:comment "First term voltage coefficient for active power (Kp1). Not used when .staticLoadModelType = constantZ." . a rdf:Property; ; rdfs:label "kp2"@en; rdfs:domain ; ; ; rdfs:comment "Second term voltage coefficient for active power (Kp2). Not used when .staticLoadModelType = constantZ." . a rdf:Property; ; rdfs:label "kp3"@en; rdfs:domain ; ; ; rdfs:comment "Third term voltage coefficient for active power (Kp3). Not used when .staticLoadModelType = constantZ." . a rdf:Property; ; rdfs:label "kp4"@en; rdfs:domain ; ; ; rdfs:comment "Frequency coefficient for active power (Kp4) (not = 0 if .staticLoadModelType = zIP2). Used only when .staticLoadModelType = zIP2." . a rdf:Property; ; rdfs:label "ep1"@en; rdfs:domain ; ; ; rdfs:comment "First term voltage exponent for active power (Ep1). Used only when .staticLoadModelType = exponential." . a rdf:Property; ; rdfs:label "ep2"@en; rdfs:domain ; ; ; rdfs:comment "Second term voltage exponent for active power (Ep2). Used only when .staticLoadModelType = exponential." . a rdf:Property; ; rdfs:label "ep3"@en; rdfs:domain ; ; ; rdfs:comment "Third term voltage exponent for active power (Ep3). Used only when .staticLoadModelType = exponential." . a rdf:Property; ; rdfs:label "kpf"@en; rdfs:domain ; ; ; rdfs:comment "Frequency deviation coefficient for active power (Kpf). Not used when .staticLoadModelType = constantZ." . a rdf:Property; ; rdfs:label "kq1"@en; rdfs:domain ; ; ; rdfs:comment "First term voltage coefficient for reactive power (Kq1). Not used when .staticLoadModelType = constantZ." . a rdf:Property; ; rdfs:label "kq2"@en; rdfs:domain ; ; ; rdfs:comment "Second term voltage coefficient for reactive power (Kq2). Not used when .staticLoadModelType = constantZ." . a rdf:Property; ; rdfs:label "kq3"@en; rdfs:domain ; ; ; rdfs:comment "Third term voltage coefficient for reactive power (Kq3). Not used when .staticLoadModelType = constantZ." . a rdf:Property; ; rdfs:label "kq4"@en; rdfs:domain ; ; ; rdfs:comment "Frequency coefficient for reactive power (Kq4) (not = 0 when .staticLoadModelType = zIP2). Used only when .staticLoadModelType - zIP2." . a rdf:Property; ; rdfs:label "eq1"@en; rdfs:domain ; ; ; rdfs:comment "First term voltage exponent for reactive power (Eq1). Used only when .staticLoadModelType = exponential." . a rdf:Property; ; rdfs:label "eq2"@en; rdfs:domain ; ; ; rdfs:comment "Second term voltage exponent for reactive power (Eq2). Used only when .staticLoadModelType = exponential." . a rdf:Property; ; rdfs:label "eq3"@en; rdfs:domain ; ; ; rdfs:comment "Third term voltage exponent for reactive power (Eq3). Used only when .staticLoadModelType = exponential." . a rdf:Property; ; rdfs:label "kqf"@en; rdfs:domain ; ; ; rdfs:comment "Frequency deviation coefficient for reactive power (Kqf). Not used when .staticLoadModelType = constantZ." . a rdfs:Class; rdfs:label "LoadMotor"@en; rdfs:subClassOf ; rdfs:comment """Aggregate induction motor load. This model is used to represent a fraction of an ordinary load as \"induction motor load\". It allows a load that is treated as an ordinary constant power in power flow analysis to be represented by an induction motor in dynamic simulation. This model is intended for representation of aggregations of many motors dispersed through a load represented at a high voltage bus but where there is no information on the characteristics of individual motors. Either a \"one-cage\" or \"two-cage\" model of the induction machine can be modelled. Magnetic saturation is not modelled. This model treats a fraction of the constant power part of a load as a motor. During initialisation, the initial power drawn by the motor is set equal to Pfrac times the constant P part of the static load. The remainder of the load is left as a static load. The reactive power demand of the motor is calculated during initialisation as a function of voltage at the load bus. This reactive power demand can be less than or greater than the constant Q component of the load. If the motor's reactive demand is greater than the constant Q component of the load, the model inserts a shunt capacitor at the terminal of the motor to bring its reactive demand down to equal the constant Q reactive load. If an induction motor load model and a static load model are both present for a load, the motor Pfrac is assumed to be subtracted from the power flow constant P load before the static load model is applied. The remainder of the load, if any, is then represented by the static load model."""; ; . a rdf:Property; ; rdfs:label "pfrac"@en; rdfs:domain ; ; ; rdfs:comment "Fraction of constant-power load to be represented by this motor model (Pfrac) (>= 0,0 and <= 1,0). Typical value = 0,3." . a rdf:Property; ; rdfs:label "lfac"@en; rdfs:domain ; ; ; rdfs:comment "Loading factor (Lfac). The ratio of initial P to motor MVA base. Typical value = 0,8." . a rdf:Property; ; rdfs:label "ls"@en; rdfs:domain ; ; ; rdfs:comment "Synchronous reactance (Ls). Typical value = 3,2." . a rdf:Property; ; rdfs:label "lp"@en; rdfs:domain ; ; ; rdfs:comment "Transient reactance (Lp). Typical value = 0,15." . a rdf:Property; ; rdfs:label "lpp"@en; rdfs:domain ; ; ; rdfs:comment "Subtransient reactance (Lpp). Typical value = 0,15." . a rdf:Property; ; rdfs:label "ra"@en; rdfs:domain ; ; ; rdfs:comment "Stator resistance (Ra). Typical value = 0." . a rdf:Property; ; rdfs:label "tpo"@en; rdfs:domain ; ; ; rdfs:comment "Transient rotor time constant (Tpo) (>= 0). Typical value = 1." . a rdf:Property; ; rdfs:label "tppo"@en; rdfs:domain ; ; ; rdfs:comment "Subtransient rotor time constant (Tppo) (>= 0). Typical value = 0,02." . a rdf:Property; ; rdfs:label "h"@en; rdfs:domain ; ; ; rdfs:comment "Inertia constant (H) (>= 0). Typical value = 0,4." . a rdf:Property; ; rdfs:label "d"@en; rdfs:domain ; ; ; rdfs:comment "Damping factor (D). Unit = delta P/delta speed. Typical value = 2." . a rdf:Property; ; rdfs:label "vt"@en; rdfs:domain ; ; ; rdfs:comment "Voltage threshold for tripping (Vt). Typical value = 0,7." . a rdf:Property; ; rdfs:label "tv"@en; rdfs:domain ; ; ; rdfs:comment "Voltage trip pickup time (Tv) (>= 0). Typical value = 0,1." . a rdf:Property; ; rdfs:label "tbkr"@en; rdfs:domain ; ; ; rdfs:comment "Circuit breaker operating time (Tbkr) (>= 0). Typical value = 0,08." . a ; rdfs:label "HVDCDynamics"@en; rdfs:comment "High voltage direct current (HVDC) models." . a rdfs:Class; rdfs:label "CSCDynamics"@en; rdfs:subClassOf ; rdfs:comment "CSC function block whose behaviour is described by reference to a standard model or by definition of a user-defined model."; . a rdfs:Class; rdfs:label "HVDCDynamics"@en; rdfs:subClassOf ; rdfs:comment "HVDC whose behaviour is described by reference to a standard model or by definition of a user-defined model."; . a rdfs:Class; rdfs:label "VSCDynamics"@en; rdfs:subClassOf ; rdfs:comment "VSC function block whose behaviour is described by reference to a standard model or by definition of a user-defined model."; . a ; rdfs:label "StaticVarCompensatorDynamics"@en; rdfs:comment "Static var compensator (SVC) models." . a rdfs:Class; rdfs:label "StaticVarCompensatorDynamics"@en; rdfs:subClassOf ; rdfs:comment "Static var compensator whose behaviour is described by reference to a standard model or by definition of a user-defined model."; .